No data comes when extracting data for 2LIS_06_INV

Hi,
I am trying to extract data from 2LIS_06_INV into my BI system.I see the invoice numbers in RSEG table as created from SRM 5.0 into my R/3 system but unfortunately no data gets extracted.Please provide some pointers if some setting needs to be done for the same.
Joy

Hi,
It is working fine I tried with out activating in LBWE.
Thanks!
Surendra.

Similar Messages

  • Data missing while loading data for 2lis_06_inv

    Hi,
    We are loading data  in data-source 2LIS_06_inv from R3 system. While checking data, it was found that there is data difference between RSA7 and PSA level of data-source.
    Ex: I am getting 498 data-records in RSA7 for 2lis_06_inv , but I am getting 495 data-records at PSA level of data-source in BW level.
    That means 3 records are missing. Also run-time exceed error is showing but data is loaded successfully in system.
    Could you please help ?
    Thanks in advance
    Devesh Varshney

    Hi Suchitra,
    I have checked data-source:
    1) There is no selection is given in init selection.
    2) Last changed is done on 10 jan
    3) no user exit is return for data-source
    How can we check issue with function module which is used in data-source since it is standard data-source.
    Please help.
    Thanks in advance
    Devesh Babu

  • Mac OS X keep getting error message when extracting files for trail version of CS5 master suite.

    Mac OS X keep getting error message when extracting files foUsingr trail version of CS5 master suite. I deleted all Adobe files and tried again several time and keep getting the same results.

    What error message are you receiving?  What version of Mac OS do you have installed?

  • I have Firefox 3.6.2 on my Mac. There are newer ones - 4 & 5. How come when I search for updates, I get the message that there are none?

    I installed the latest version of 1Password 3.6.5 but its extension is incompatible with Firefox 3.6.2. It wants Firefox 4 or 5. The 1Password extension does work, however, on my Safari 5.1 browser. I want 1Password on both browsers but Firefox is preventing this due to inability to automatically update to Firefox 4 or 5. That option is checked in the Firefox preferences.

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

    I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

    Jonas,
    I think what you want is a 3D plot of a cylinder. I have attached an example using a parametric 3D plot.
    You will probably want to duplicate the points for the first theta value to close the cylinder. I'm not sure what properties of the graph can be manipulated to make it easier to see.
    Bruce
    Bruce Ammons
    Ammons Engineering
    Attachments:
    Cylinder_Plot_3D.vi ‏76 KB

  • When I try to download a software up date for another program in Binary File (eg CCleaner or a Microsoft file) in FireFox they all just come up in the download window as 'Cancelled'? When I go to the destination folder the download file icon is there wit

    When I try to download a software up date for another program in Binary File (eg. C Cleaner or a Microsoft file) in Firefox they all just come up in the download window as 'Canceled'? When I go to the destination folder the download file icon is there with 0 Kb's for size...Then when I click 'RETRY' the download it appears to download fully, but when I go into the destination folder the downloaded file is not there? I need to know if there is something in the Firefox options to resolve this problem or much more!!

    If all .exe files are blocked, antivirus software is most likely configured to block them. See if you can download these with your antivirus and/or security software disabled.

  • HT201270 i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

    i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

    capriz wrote:
    i have just updated my old 3GS ...
    To what... iOS 7 is Not supported on the 3 GS

  • Warning Messages when extracting Time Management Data using 0HR_PT_1,2

    Hi,
    When extracting data using 0HR_PT_1 and 0HR_PT_2 extractors it comes up with the following errors and warnings even if the records in the source system are correct.
    "No Personel Work Schedule for personnel number XXXXXXX" and
    "Personnel number XXXXXXX could not be locked".
    Did any one of you face the same issue? If so, please do let me know how to fix these!
    Thanks,
    Ajay

    Hi Ajay
    To my knowledge this is caused because there are locks on registrations for these employees in R/3, probably because there using the system at the time of extraction.
    To my knowledge the only way to handle this is to set "yellow" status to "green" this can be done automaticly on the InfoPackage.
    I know this problem from two companies and i have not experienced any inconsistancies on data due to this proceeding.
    Chris

  • Run time error COMPUTE_BCD_OVERFLOW when extracting data

    Dear all,
    We are facing an issue when trying to extract the data for CRM Service contract item Extractor. It is giving runtime error when trying to extract particular range of transaction number say 1 to 50. but if i split these into 2 packages i.e 1 to 25 & 26 to 50, the data is getting extracted without any problems. If anyone has come across the similar issue, please share your views.
    details of the errro:
    Runtime Errors         COMPUTE_BCD_OVERFLOW
    Except.                CX_SY_ARITHMETIC_OVERFLOW
    Short text
        Overflow during the arithmetical operation (type P) in program
    Thanks in Advance!
    Regards,
    Pavan

    Hi,
    I can see that there are several SAP notes regarding this issue, you just need to check their symptons and if they are valid for your SAP_APPL release and support package.
    Here are the SAP notes:
    - 1295055: Product cost collector: Field AFPO-WEMNG set incorrectly
    - 964308: COMPUTE_BCD_OVERFLOW in CKMO_GET_ORD_HIST_NETWR_MMIM
    I hope they help you.
    Regards,
    Marcelo

  • I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year.  I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

    I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year.  I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".  I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service.  Is there something I should do to my IPAD?  I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions).  I don't know what to do next. My IOS version is 6.1.3.  I did go into Network from the general tab and I see it says "SIM not provisioned".    HELP and Thank you in advance.

    Hello Theresa818,
    Thank you for using Apple Support Communities!
    It sounds like the cellular data will not activate for some reason on the iPad.
    I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
    Check for a carrier settings update.
    Update your iPad.
    Toggle the Cellular Data setting off and on under Settings > Cellular Data.
    Restart your iPad.
    Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
    If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
    Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPad as new.
    If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
    I know you may have done one or two of the steps here, so you can skip those.
    Take care,
    Sterling

  • How to extract data for particular two members of same dimension.

    As per the requirement i need to export data for certain members of a dimension. Lets say we need data for two account members A and B which is in in Account dimension only but is not a direct children. I need the data for all the available years too. Please suggest me how my DATAEXPORT command should look like.
    When i am using an AND statement it is not working accordingly. Say i am fixing for years 2007 and 2009 but the output file is coming for 2009 and 2010.
    Something other is happening when i am fixing OPEX_31 and OPEX_32. The values are coming not only for OPEX_31 and OPEX_32 but for many more accounts too.
    Here is my dataexport statement for your reference
    SET DATAEXPORTOPTIONS
    DataExportLevel "ALL";
    DataExportColFormat ON;
    DataExportDimHeader ON;
    DataExportOverwriteFile ON;
    FIX("LC","Total_Year","ESB1","2009","SIERRA","COSTCENTER_NA","CELLULAR_NA","OPEX_31",
    "January","February","March","April","May","June","July","August","September","October","November","December");
    DATAEXPORT "File" "     " "D:\exports\feb.txt";
    ENDFIX;
    I need data for OPEX_31 and OPEX_32 for all the available years starting from 2001 to 2025.
    Please suggest what are the modification needed to get the desired result.
    Thanks in advance

    Hi,
    There a few different options you can use for fixing on the months, years..
    e.g. FIX(January:December)
    or FIX(@CHILDREN(YearTotal)) < depends what the parent of the months is
    sames goes for years
    FIX(2009:2025)
    or
    FIX(@CHILDREN(Year)
    If your period dimension is dense you can always use that as the column header e.g. DataExportColHeader "Period" and then fix on the accounts you require.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • When trying to install itunes on windows 7 i got a configuration data for this product is corrupt?

    It is not allowing me to install, it gives me the error: configuration data for this product is corrupt. How do I install itunes on my windows 7?
    Trying to update my ipad....but I first need to install itunes!!

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error in Installing the Business Content for 2LIS_06_INV data source

    Hi Experts,
    We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
    Regards,
    Kavitha Jagannath

    Hi,
    Follow bellow steps:
    1. Goto RSA1.
    2. Select the BI content.
    3. Select the Grouping as' In Dataflow before and after'
    Then,you can get the data flow which are haveing the DS/TR/Data targets.
    4. Select the Install by setting the 'Install in background'.
    Regards.

  • "Insufficient data for an image" when opening a PDF, even with Adobe Reader 11.0.06

    I have extracted some pages from a large, scanned, PDF into a separate document, using a product called Nuance PDF Converter 7, and when we try to open that with Adobe Reader 11.0.06, we receive the error "Insufficient data for an image".  I have read that this error was supposed to be fixed with the latest version of Adobe Reader 11, but I have installed that, and it doesn't help.

    I am also having this problem, especially with scanned documents. Since I need to download scanned documents in my work this is a big problem!Sometimes I can read but not save the document, sometimes one or two of the pages will be blank from the start. I have the latest version of Adobe Reader XI (11.0.10). I tried reducing the page zoom, a suggested workaround on this page: Acrobat: “Insufficient data for an image” error after updating to 10.1.4 or 9.5.2,  but that did not help at all. FWIW I use a Windows 8.1 PC with 4 GB RAM. I usually download PDFs from the internet using Firefox.

  • My MacKeeper says iPhoto is out of date.  When I try to update the App Store says I need IOS 10.9 or later.  I have 10.7.5 and when I check for updates my Mac says the software is up to date.  How do I solve this problem??

    My MacKeeper says iPhoto is out of date.  When I try to update it, the App Store says I need IOS 10.9 or later.  I have 10.7.5 and when I check for updates my Mac says the OS software is up to date.  How do I solve this problem??

    1. First step to solving the Problem: Trash MacKeeper. It's a pile of trash that does far more harm to your computer than good.
    https://discussions.apple.com/docs/DOC-3691
    2. What version of iPhoto do you have? (iPhoto Menu -> About iPhoto)

Maybe you are looking for