No data in Active table of DSO for fields populated by End Routine
Hi,
I have a Standard DSO where we are populating few fields by using End Routine.
Last week we added 5 more fields to DSO and wrote a logic in End ROutine to populate the DSO. These new fields dont have any mapping and these are just populated by end routine only.
When I loaded the data from Data Source TO DSO, Data is loaded correctly into NEW DATA Table of DSO for all the fields. I could see correct data as per the logic in NEW Table including old and new fields.
However, when I activate the DSO, I could not find the data for new fields which I added last week. Remaining fields are getting data as per the logic. Only these five fields are not having any data.
Can you please let me know if any one had similar issue. I was under impression that all the data in the new table will go to Active table when we activate the DSO.
Your inputs are highly appreciated.
Thanks
Krishna
What version of BW are you using? When editing your end-routine, a pop-up should display saying which fields you want populated/transferred from the end routine. This pop-up will not display if you are using a lower version of BW 7.x. To get around this, make sure that your newly added fields have a transformation rule type set to constant. This will make sure that the fields get populated when transferring from new to active tables.
Similar Messages
-
Error while activating data from new table of DSO to active table
HI,
while activating data from new table of DSO to active table i am getting
error message as "Error occurred while deciding partition number".
Plz any idea hoe to resolve this one.
thanks & regards
KPS MOORTHYHi
You are trying to update/upload the Records which are already been there in the DSO Active Data Table which has the partition.
Try to see the Record Nos already been activated and update/upload with selective, if possible.
You can trace the changes at Change log table for the same.
Hope it helps
Edited by: Aduri on Jan 21, 2009 10:38 AM -
Data in active table showing blank value.
Hello All,
I am loading the data from write opt DSO to DSO.
I have written an END Routine to populate a field (zfield)
when i load the data to the ODS , an dcheck the data in the new table of ODS it shows the data for the zfield.
But after activating the data for ODS it becomes blank.
Why does it happens?
Thanks.
VinayHi Vinay,
I am not very sure but I guess we will have to do some mapping (kind of dummy e.g. constant 1) for the fields we are populating in END routine.
I guess you must have done that coz you are getting data in new table..even then check once.
Gaurav -
Hi Friends,
What is the property of the Active Table of D.S.O means it alway has the functionality like Overwrite or addition also.
OR it is based on the settings of the field in the transformation.
Thanks in advance.
Thanks & Regards,
Vas
Edited by: Vas_srini on Jul 8, 2010 8:35 AM
Please search the forum before posting a thread
Edited by: Pravender on Jul 8, 2010 12:14 PMHi Suneel,
1)Try to activate the request manually,then u will be getting "Green" symbol.The reason why the request is "Red" although ur long text are in green might be due to the system performance or there might be anyother errors in the 'Processing' tab.Try to check it 7 activate the request manually.
2)U can 'repeat' the ODS by right clicking on it why bcoz activation of records might be terminated so that request will become 'Green'.
It might help you.
Thanks& regards,
Madhu -
Insert,update and delete data in a table using webdynpro for abap
Dear All,
I have a requirement to create a table allowing the user to add rows in it and update a row as well as delete a row from that table.To do this I guess I have to make use of ALV.But using ALV I am not able to enter data to a table where as I can make a column editable delete a row etc. please guide me to perform these operations(insert,update and delete) on table.
Thanks,
Reddy.Hi Sridhar,
By using ALV you can do all insert delete etc things. if you want to edit i mean you can yenter data in ALV.
Check this...
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3133474a-0801-0010-d692-81827814a5a1
Editing alv in web dynpro
editing rows in alv reports
Re: editing rows and columns in alv reports in webdynpro abap
Cheers,
Kris. -
Select data from a table and a view: field with same content and different type
hi all,
I need data from a table hrp1001 and a view V_USR_NAME. What they have in common are the content of the fields SOBID and BNAME .
It will be easier if those fields add a same type but they dont.
Any suggestions for a workaround?
ThanksHi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay -
FLEET Table, Possible Values For Field IS SI UNIT
Dear experts,
While doing analysis on fleet data I realized that for field IS_SI_UNIT (PM: Vehicle Data in SI Unit (e.g. Dimensions)) in table FLEET in two separate systems we have vehicle records set with different entries for this field.
In one system vehicles are stored with value F: DB Unit set individually (new)
and in other one with value Y: DB Unit set through (new)
Systems are SAP ECC 6.0
Does anyone know what does it mean and what influence this has? In both systems vehicles are created by end users using standard PM creation transaction and those indicators are set in background while equipment is saved so there is not influence by end user.
I could not find much information on SAP support portal about meaning behind possible values for field IS_SI_UNIT in table FLEET so was wondering if anyone knows more here?
Thanks,
IvoDear,
There will not be any impact.Finally system will consider only SI units for fleet equipment consumption calculation.
Kindly read note:366733 - Equipment/fleet: SI units in table FLEET and 372736 - Equipmt/vehicle:rounding error because of SI units
It may help you.
But in my system i can view only "Y"
Regards,
Pardhu -
Reading data from BSEG table with Non-key fields in where clause
Hi All,
I have to read data from BSEG table based on WBS element field (PROJK). As I'm not passing key fields to WHERE clause system couldnt run the select statement. Since BSEG is a cluster table I cant even create secondary index on PROJK field.
Could you please tell me, how to improve its performance.
Regards
Jaker.SELECT bukrs
belnr
gjahr
shkzg
dmbtr
hkont
lifnr
matnr
werks
menge
meins
ebeln
FROM bseg
INTO TABLE it_bseg
PACKAGE SIZE 10
FOR ALL ENTRIES IN it_final
WHERE bukrs EQ it_final-bukrs
AND belnr EQ it_final-belnr
AND gjahr EQ it_final-gjahr
AND buzei EQ it_final-buzei
AND hkont EQ it_final-hkont
AND werks IN s_werks.
By using package and fetch from BSEG table. gathering all other information to a final internal table.This will reduce the hit to database.And also try to put that data in hashed internal table which is it_bseg....then definetly improve the performance.
<REMOVED BY MODERATOR>
Dara.
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 12:47 PM -
Activation failed in DSO for BI 7
Hi,
I have an existing custom DSO. I want a add a new infoobject ZMATERIAL which has ZMATL_GRP as attribute. I have firstly added ZMATERIAL at data source and acivated . DTP is already activated.
Now I have added ZMATERIAL in DSO and trying to activate the DSO. But getting the following errors- 1. Structure change at field level (convert table /BIC/AZBI7_DSO00)
2. Enhancement category for table missing
3.enhancement category for include or subtype missing
Please guide me , how to resolve this issue
Regards
DeepHello Deep,
Did you find a solution to this problem? I know that if you want to change the structure you have to delete the data in the target first otherwise it throws the errors you listed below.
In BI 7.0 you can change, in other words, remodel an infocube using the remodelling option but i couldn't find anything of the sort for ODS. I have to do something similar and was wondering if you were able to add the field without having to delete the data in the ODS. I would really appreciate it if you can get back to me on this problem.
Thank You
MM -
Which table stored description for field name
hi,
for example,
field name is LIFNR , description (vendor number),
which table stored this description (vendor number) for that field name(LIFNR) ?1. From table DD03L, give your tablename and get all of its field names and corresponding data element names.
2. From table DD03T, get the description of each data element you have got in step 1.
3. Then Use Function Module DDIF_FIELDINFO_GET
DD02L : ALL SAP TABLE NAMES
DD02T : DESCRIPTION OF TABLE NAMES
DD03L : FIELDS IN A TABLE.
Check the below link for more information.
http://www.sap-img.com/abap/how-to-get-the-field-descriptions-of-a-table.htm
Thanks,
Balaji -
Data from two tables with no key fields
Hi Friends,
I want to retrieve data from mara and mseg tables,matnr from mara and menge from mseg but problem is there is no key fields
from these two tables how can i retrieve the data from these two tables?
regards,
bikashHi,
You need to have a common field between 2 tables if you want to put a join between them.
Or otherwise,
Find the check table of the primary keys of the tables.
Try to find the common fields from one of the check tables of the primary keys.
Example,
If you want to join tables A and B.
Both tables don't contain common fields.
A has primary key fields X and Y.
go to check table of X or Y.
Let check table of X is C.
check any field in C which are exist in table B.
Join tables A and C.
Based on this pick the data from B.
Regards,
Prashant -
Different view in table and screen for field
I need to display EKKN-PS_PSP_PNR in one of my purchasing reports. This is the WBS Element. the problem is it is displayed different on the screen and in the database
for eg: When i extract it from the database it appears as a number, but on the screen when you click on the record, it is a bunch of characters. And it is the characters that I need to display. How to do the conversion. thank youHi,
Use
CONVERSION_EXIT_ABPSP_INPUT Conversion External > Internal WBS Element Number
CONVERSION_EXIT_ABPSP_OUTPUT Conversion Internal > External WBS Element Number
routines to convert the data as you see on the screen.
Cheers
VJ -
Append split data into internal table w.r.t fields
Hai friends,
I am getting the data matnr : 13235,12124,34234
and maktx : aaaa,bbbb , cccc
and lgort : 234, 345, 456
But I have taken the structure as begin of itab
matnr like -
maktx like -
lgort like-----,
end of itab.
now the data as i need to append first row as 13235 to matnr
aaaa to maktx
234 to lgort,
and second row as 12124 to matnr
bbbb to maktx
345 to lgort
and same as third row
Iam spliting the data but the problem is here matnr is variable i.e based on counter of matnr it should append those no of rows
please give the solution,
prasad.Hi Prasad,
Loop at i_matnr.
itab-matnr = i_matnr-matnr.
Read table i_maktx with key matnr = i_matnr-matnr.
if sy-subrc = 0.
itab-maktx = i_maktx-maktx.
endif.
Read table i_lgort with key matnr = i_matnr-matnr.
if sy-subrc = 0.
itab-lgort = i_lgort-lgort.
endif.
append itab.
Endloop. -
Sample source code for fields mapping in expert routine
Hi All
Iam writing the expert routine from dso to cube for example I have two fields in dso FLD1,FLD2
same fields in infocube also ,can any body provide me sample abap code to map source fields to target fields in expert routine,your help will be heighly appreciatble,it's an argent.
regards
eliazBasic would be ;
RESULT_FIELDS -xxx = <SOURCE_FIELDS> -xxx
you have the source fields as source, and result fields for as the target. In between you can check some conditions as in other routines of transformation.
BEGIN OF tys_SC_1, shows your source fields ( in your case DSO chars and key figures)
BEGIN OF tys_TG_1, , shows your result fields ( in your case Cube characteristics)
Hope this helps
Derya -
Delivery Issue for field population
I have a question that how to get EIPO-STAWN from the delivery Note
Coz i want to show the EIPO-STAWN in delivery DOC. but i don't know how to setup the relationship between LIKP , LIPS..... and EIPO.
do anyone know it? does this got to anything with customization?
I am using FM GN_DELIVERY_CREATE
Thx for helpTechnical Data
Message type__________ E (Error)
Message class_________ /SAPSLL/PLUGINR3 (SLL: Legal Services: Messages for Plug-Ins R/3)
Message number________ 006
Message variable 1____ 0190-15806W
Message variable 2____ US
Message variable 3____ Missing HTS No.
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________ 2 (important)
Sort criterion________
Number________________ 1
Environment Information
Group_________________
Sales Document________ 20146638
Item (SD)_____________ 000012
Schedule Line Number__
Counter_______________ 01
Group type____________ L
Maybe you are looking for
-
How do I use the double sided printing with my HP Officejet 6500A plus
I need help with learning to use the double sided printing with my HP Officejet 6500A Plus
-
on my ipad, in the ibooks app, the categories icon disappeared next to the library icon in the top left hand corner, when i go the the top charts in the store..how do i get it back?
-
Sudden playback problems in Premiere Pro CS 5.5.2 Mac - audio but no video
This is happening on my 12-core Xeon Mac Pro with 16gb of RAM (Lion 10.7.3), nVIDIA GeForce GTX 285 card, so it is probably not an insufficient-hardware issue... plus nothing has changed in the system that would explain this issue. I was working on a
-
i use Firefox 3.5.3
-
XWindows/Quartz apps on second monitor
I have some Windows apps that I run using WineSkin (I believe uses XWindows/Quartz for the UI). After upgrading to Mavericks they would not show any display to the screen, but I found another thread mentioning that you had to reinstall Quartz after i