No dlivery challan no revieved

Hi All,
There is an quarry,
My user does not have a Delivery Challan but he had recieved the material .
Now he had recieved a Tax Invoice *** Challan .
my dought is when he want to post a GR in SAP weather he can give tax invoice *** challan ref no in Goods receipt/header data/general/Delivery note no as he had not recieved the Delivery challan saperately .
pls guide me in this regard.
Regards,
Rajashekhar

Hai,
Kidnly check whether you have section code present for the tax line item.
Raghav

Similar Messages

  • Error in creation of remittance of challan

    Dear Guru,
         I need one help,
    when i am doing remittance of Challan, i am getting below attached file error, any body can help.
    Error is - "business place for document could not be determined"
    Please tell any solution
    it urgent,
    Regards,
    manas

    Hi Manas,
    maintain the nuber group assign the number range to it.
    Go to -Extended WHT-india-Remitence Challan-Define Number Group
    Assign number ranges to Number Group
    Maintain Number ranges
    Hope this would help you.
    Regards
    Pankaj P

  • Problem  in Creation of  Remittance Challan

    Hi sap Gurus,
    I have problem whne i am Creating a Remittace challan For With holding Tax its giving a error message no.8I705,
    No.key not found.
    Can any one Please Help me.
    Thanks in advance.
    Regards
    bharath

    Hello Bharat,
    For remittance challans first you need to define no group & no ranges.
    - Maintain No groups
    - Maintain No ranges
    - Assign no ranges to no groups
    Please maintain the above settings, it will solve your problem. Try this if u have any querry pl revert, If useful pl assign points
    Thanks
    Para

  • Error in Bank Challan update

    Hi Experts,
    Am a fresher in SAP and your help would be highly appreciated.
    The issue is regarding the bank challan update. My client has paid TDS through an intercompany bank account and while bank challan update the intercompany bank is not accepted. To elaborate further with an example : For Company Code OPQR ,they have paid TDS through bank account 11010415 & house bank  60001 which pertains to company code  WXYZ.  Now when they are updating the bank challan for company code  OPQR  the same house  bank is not getting accepted and the error says:
    House Bank 60001 dosent exist for OPQR company code.
    Message No 8I713
    I have checked and found out that the particular housebank has not been created for company code OPQR. But am not sure whether the creation of this particualr housebank for the particular company code is the actual way to resolve this error or may be some other concepts are involved.
    Would be great if you can pls guide.
    Thanks in advance for your support.
    Rgds
    DB

    Dear Debjani,
    Sorry by late. I thought my imputs wasn't helpful.
    I suggest you create same bank for required company code. Copy all entries in t-code FBZP from original home bank and define also: OBBA, OBBB, OBBD, OB47 and OT55.
    About Business Place, it is an organizational unit below company code level that is primarily used for reporting taxes on sales/purchases.
    In some countries, the business place is also used to assign official document numbers to outgoing documents. In Brazil we assign it in invoices to be able change some company code data in DME generation during F110.
    Read more here:
    http://help.sap.com/saphelp_dimp50/helpdata/en/36/41913ab525fb23e10000000a114084/content.htm
    Let me know if it clarifies
    Regards

  • Surcharge is not coming in Challan

    Hi Gurus,
    IAfter FB60,we create remittance challan(J1INCHLN) for Form 16A.When executing J1INCHLN,the system generate Challan no. and showing following details of challan:
    Sr.  Co Cd   Doc No. Fiscal  B.Place  Tax     Challan no.   Challan dt     Amount
    No.                          Year                 Code
    1     6000    45454    2008    194C      C1       100023          13.1.09        20.00
    2     6000    45454    2008    194C      E1       100023          13.1.09          1.00
    3     6000    45454    2008    194C      H1       100023          13.1.09          1.00
    I have defined surcharge as "CS",but it is not coming in challan.
    Pl advise.
    Regards,
    Samar

    Hi Gurus,
    Thanks for the reply.
    Still surcharge is not coming in remittance challan.Due to this problem,surcharge also not coming
    in J1INQEFILE reports.
    Pl advise.
    Regards,
    Samar

  • Issue in TDS Challan Updation

    Hi
    I have an issue in which we have created a vendor invoice through F-02. The same has also been paid by creating an entry through F-02. However, when we are taking a challan for the same through j1inchln with the payment document number. the same is not showing. The system is giving an error that the document has not been updated in WITH_ITEM table.
    The payment cheque has also been cleared from the Bank A/c.
    Regards
    RS

    Hi,
    It looks like that, TDS line item has been created manually. If it was created manually it won't update in WITH_ITEM table.
    Only soultion is you have to issue a mannual TDS certificate to your vendor.
    All the best
    Prasad

  • 57F4 challan print - getting parent item no and po number for child item

    Hi ,
    In 57F4 challan, Subcontract components - i.e Child items are used for creating the challans.
    However while printing needs the parent item no with the purchase order number for that child item number.
    It is getting stored in RM07M structure.
    Any inputs / suggestions how to retrive parent item number and purchase order number for child item i.e for subcontract items?
    Thank you .
    Prasad.

    Thank you for the reply. I checked the table RSEG table for material document and PO details, however the RSEG gets populated when there is credit or debit entries.
    In this 57F4 challan there is no credit or debit enteries hence would not get in RSEG table.
    Appreciate your inputs for any other alternative.
    OR is there any table or Function Module to get the enteries of the struture of RM07M .

  • Driver program name for script j_1i_57f4 challan

    hi .... plz i needed driver program name for delivery challan script : J_1I_57F4 . i tried to find it but since the output is displayed only from sp02 im unable to get its driver program name . i have to add certain fields in that form and corresponding logic in that form .
    thanks and regards .

    hi
    If u check the TNAPR table u will get the Driver Program as J_1I57FPN  , allu have to do is to Activate the SAP SCRIPT DEBUGGGER   and check the values  and also in the driver program above and check whihc values are coming and not.
    surya

  • Excise Invoice Selection Vs assessable value in Subcontracting Challan

    Hi,
    I have maintained the Assessable Value for my subcontracting components and also there is Excise Invoice exists for this components. While creating Subcontracting challan, system is displaying information message that Material  XXXXXX has an assessable value, but I would like to refer the Excise Invoice.
    Hence, when I click the Excise Invoice selection, there is no effect. As per SAP message "The message is for information purpose only. Go ahead with the option selected" system should ignore this message and allow me to select Excise Invoices but it is not happening.
    Is this bug or any other config setting to be done to overcome this issue?.
    Your replies to resolve this issue is highly appreciated.
    Thanks,
    Babu.

    Hi,
    For every excisable material (whether you procure, manufacture or sale) has to be declared as excisable material in table J1ID with appropriate chapter ID, assessable value & CENVAT declaration.
    When you send the excisable material to the sub-contractor the material needs to be returned back to your plant within 180 days. If this is not done, then you will have to pay back the excise duty on the material with base value as assessable value. Hence it is required to maintain the assessable value.
    Hope this clears your query.
    Regards,
    Prashant

  • EXCISE TAB IN MIGO FOR SUBCONTRACTING Challan

    HI Gurus
    In Subcontracting, I have created a sub contracting challan. At the time of MIGO, in Excise invoice tab page , I am entering the Challan no & year and then enter
    After that i have saved the MAterial document
    But when i m displaying  material document i cant see the excise tab ??What can be the possible reaosn
    Also i have checked the  Chapter ID ,Vendor excise detail everything is maintained but still i am not able to see the excise tab
    plz suggest
    regards
    shailesh

    Dear Frienr
    Can u plz let me know what is the note no an where i can find that note no
    point will be duly awarded
    regds
    shailesh

  • Delivery should not be reversed without cancelling excise challan.

    Dear Friends,
    The requirement is like this, after creating the excise invoice and exise challan if the users want to cancel that order they are doing post goods reversal and delivery cancellation followed by sales order deletion. They are not checking whether there is any excise challan was created already for that delivery (excise invoice). 
        So please give me a solution which should restrict the user not to allow PGR if there is an excise challan created for that delivery.
    And also please let me know with which T.code we can see list of excise challans.
    Good solution definitely be rewared.
    Regards,
    Sreehari

    Hi Sreehari
    in the enhancement V50S0001 you can check if the excise invoice has the status cancelled before proceeding for delivery reversal.
    Delivery -> Billing -> Excise invoice number -> check status -> return.
    take help of your abap person if required.
    Bharat

  • Error While Creating Remittance Challan

    Dear All
    I have made down payment to a Vendor of Rs. 10,000 .TDS @11.33 was deducted on the Down Payment. Then he raised an invoice of Rs. 100,000. Again TDS was deducted on the Rs. 90,000 balance amount.
    Now when I am  Cretaing  Remittance Challan for him I am getting the following error.''
    No unpaid tax lines exist for the given selection criteria.Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
    Thanks and Regards
    Kanwaljit

    The following may be the one of the cause please check all.
    1. Check section code & Bussuniss place at document level in BSEG. if the section code is not updated at document level u can not update the section code and bussiness place for Direct FI invoices from J1INPP as it is meant only for MM invoices. u has to reverse the invoice and repost it. or else develop a BDC/program/query which can update the section code.
    2. Check the repient type at vendor master, and also check wheather the recipent type was changed after posting document it ussullay occurs. the possible solution is again the same reverse the document and repost it.
    Check these two things first and let me know it the problem still persists.
    Thanks & Regards
    Krishna Chaitanya

  • TDS Challan error - while creating payment document

    Hi,
    I was trying to create With holding tax Challan through J1INCHLN.
    Following error occurred after simulating payment document - "Withholding tax lines are being cleared along with other line items"
    Please help in above matter.
    Thanks
    Deepak

    Dear,
    Please check with business users that are these manual reversal valid? See the username for these documents and also check which transaction was used whether it is FB08 or manual JV. If it was manual then reset these documents through FBRA and reverse it through FB08 because manual is not recommended.
    If reversal are not required then after resetting through FBRA run J1INCHLN, which must bring data and you will be able to create challan.
    Respective period means the period which you enter into J1INCHLN screen.
    Regards,
    Chintan Joshi

  • Error while doing J1IH (Excise JV) - TR6 Challan posting

    I am getting the following error while doing,  J1IH (Excise JV) - TR6 Challan posting
    Please assist....
    Short text
        The COMMIT WORK processing must not be interrupted.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLFACS" had to be terminated because it h
        come across a statement that unfortunately cannot be executed.
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        During the COMMIT WORK statement, the following are executed:
        - the routines registered with the statement PERFORM .. ON COMMIT,
        - the registered methods for the events of the object services
          and
        - possibly the local update (SET UPDATE TASK LOCAL).
        An exception was raised and caught. The normal sequence of the routines
        was interrupted by this resulting in the program being continued before
        the call of COMMIT WORK. As this can lead to inconsistencies, the
        processing cannot be continued in the normal way.

    Thanks Milind...
    I am also getting the following error:
    Balance in transaction currency
        Message no. F5702
    Diagnosis
        A balance has occurred in transaction currency 'INR' with the following
        details:
        Exchange rate '00', amount '       500,000.00' and currency key 'INR'.
        The data in the transaction currency were transferred from the calling
        application.
    System Response
        Your data cannot be processed in FI.
    Procedure
      The error is probably in the calling application.
    Please assist

  • Error while doing Challan updation

    Dear all,
       Iam getting error while doing Challan updation, system shows an error saying "No line Item exist for Challan updation" whereas iam having all the data but the system is not picking.
    pls help on this
    will get a good points for solving this

    I understood ur problem, u r running the J1INCHLN when u r running this program . Program chks both the Table BSEG & WITH_ITEM they 2 field from BSEG-BUZEI & WITH_ITEM -J_1IBUZEI . if this 2 line item is not matching then system will show the same error which u have mentioned.
    Whether this has occured first time or rarely it occurs, if first then just update the table WITH_ITEM for the field J_1IBUZEI with respect to BSEG-BUZEI for the TDS line item only. Make the changes with help of ur Internal consultant. write an update program.

Maybe you are looking for