No Entry In table T7INOP in Payroll Log
hi Guys,
When we are running payroll this error "No entry in table T7INOP" is coming in payroll log against P0588 ie other statutory deduction
Any Idea
Thanks
ya thats true now the error is coming LWF/140 & as usual no entry in table T7INU3,What the LWF/140 is all about
Thanks
Similar Messages
-
New entries in table TSTC not capturing in scu3 change logs
Hi ,
We have TSTC table log enabled.
New Entries which comes through transport in the table TSTC are not capturing in change logs.
We have created a new Z T-code and transported it to Quality and then to Production.
But in the change logs of the tbale TSTC it is not captured both in quality and Production.
In the table TSTC t-code is present.
But the change log for the table doesnot show any new entry created.
In development change log of TSTC, the change is present but in Quality and Production it is not present.
Development client : 400
Quality Client : 600
Production Client : 600
Can any one spill some beans on it...
Thanks & Regards
KiranYou need to add "recclient = ALL" (or same client value as "rec/client" profile parameter in RZ10) to the transport profile as well in the STMS.
Search SAP notes and the forum here for "recclient" (without "/")
Cheers,
Julius -
Payroll error: No entry in table T549A for key
Hi whilw running payroll, there is a error
No entry in table T549A for key
what could be the possible reason. there are 2 payroll areas one for monthly and the other for semi monthly. this is for semi monthly. monthly is running fine.
-request help on thisHi,
Go to the perticular table and check whether you have maintained any entries for Payroll area and date modifier for semi monthly period parameter also check whether run payroll bos is checked or not.
Regards -
No entry in table T512W "SAP HR PY"
Hi Experts,
when I am trying to run a Payroll faced this error message :
"No entry in table T512W for key 99 /001
for time 15.04.2011"
Can any one help me
Thank u so much
Mohammed OthmanCheck the WT /001 in table T512W for coountry group 99....and also check the valididty dates for that WT. If it exists then check the Payroll log where your getting exact error....Check the Input and Processing in the log.....check while processing which WT you are getting error.
Mohan -
No entry in table T512W for key 40 9913
Dear Guru
When I am running simulation payroll run, system is throwing this error "No entry in table T512W for key 40 9913".
9913 is the wage type which is getting updated due to INCS rule.
In the log, 9913 value is same as value of EDLI Contribution
/3F7 EDLI contri0101 32.50
9913 0101 32.50
I checked 40EPF feature and checked master data in 587, all are correct.Is there something I need to check? Please guide
Regards
Vikas K SharmaHi
I checked the customized WT entry table and there is no 9 series WT at all.
Recently patches were updated in development. Do I have to check 40EPF features or something. I was reading some reply here but I am not clear how to do such changes.
Please guide.
Regards
Vikas K Sharma -
Hi SAP Experts
we have applied new HRSPS and we are testing it in QA server.i have the following errors in the payroll log,please i request you to give me some suggestions.I have this error for a payroll area XX
1) STOP: Enhancement to variable key is missing ZZCC****** DVALEN 1 POUTWPCOSTC. "CH=ECK MASTER= COST CENT=ER = =
00006575 Roberts Jason
2)I have other error for payroll area YY
No Entry in Table 512W for key 07 5515 for time 10/31/2006
00007296 claudia jeans
please help me
regards
sangitha reddyHi ..
The STOP error in the payroll log is a critical error. Can you give me some more details on this.
The second error is missing configuration in the Wage type evaluation table. Make sure you have the configuration in place before you run the Payroll.
Hope this helps. If so reward.
Thanks
shyam -
Hi Experts and friends .
Please see the below details and help me I am facing this problem since long time and not able to find the issue . Where is wrong . please help me
yours
jagan babu
Payroll log
General data
Successful personnel numbers
Rejected Personnel Numbers
00006003
01/2000 ( 01.03.2000 - 31.03.2000 ) Regular payroll run in 02/2000
Initialization of Payroll
Edit basic data----is displaying why I think here Basic Data processing has to display
IF SPRN If special run
ENDIF
Get previous result of period for V0
Import last payroll result
Processing of time data
GENPS Generate Personal Work Schedule PWS
PARTT Partial period parameter
IF X064 Carry Out Shift Change Compensation
ELSE Do not Perform Shift Change Compensation
ENDIF
PIT X010 P01 Create valuation bases (addition)
Input
Processing
9BAS Basic Salary
9CON Conveyance Allowance
9EPF Employee PF
*9HRA House Rent Allowance*
*Termination in operation ERROR*
20000170
X0103***** ERROR = = = =
Basic entry in IT :
A Wage type APC1C2C3ABKoReBTAwvTvn One amount/one number
3 9HRA House Rent 01
Current entry in OT:
A Wage type APC1C2C3ABKoReBTAwvTvn One amount/one number
3 9HRA House Rent 01 .
9BAS Basic Salary
Termination in operation ERROR
20000170
X0103***** ERROR = = = =
Basic entry in IT :
A Wage type APC1C2C3ABKoReBTAwvTvn One amount/one number
3 9BAS Basic Sal 01
Current entry in OT:
A Wage type APC1C2C3ABKoReBTAwvTvn One amount/one number
3 9BAS Basic Sal 01
Note :- Processing Classes 1 Assignment to Valuation bases if put 5 in (basic pay )then error gets in basic pay and not gets any error in HRA if Suppose in HRA I put Processing Classes Value 5 and Basic pay 3 then gets error HRA and not gets any error in Basic
Z010 Determination of valuation bases ZCRP
VWTCL 01 Processing class
*ERROR Cancel processing*
-- 0
ADDWT * OT Output table
1
VWTCL 01 Processing class
----ERROR Cancel processing
0
ADDWT * OT Output table
1
ADDWT * OT Output table
ELIMI Z Elim.time period ID
ZERO= N AmtNumRteTime = 0
ADDWT /001 OT Output table
2
ADDWT * OT Output table
ELIMI Z Elim.time period ID
ZERO= N AmtNumRteTime = 0
ADDWT /002 OT Output table
3
-ADDWT * OT Output table
ELIMI Z Elim.time period ID
ZERO= N AmtNumRteTime = 0
ADDWT /001 OT Output table
ADDWT /002 OT Output table
2
VWTCL 01 Processing class
ERROR Cancel processing
0
1
2
3
4
9Hi,
can u try this one
that error in prcl-01
in this /001&/002 technical wts are using for the storage of Amt(X010) and Rate(X013).All wts whatever we maintained in Basic Pay(0008) that only calculated.
For this X010 and X013 PCRS are required,For /001&/002 technical wts of specifications are normally -5.Becoz in X013 it allows 5 regarding calculations purpose.
In X010 Specification will be 0,1,2,3(which will Work) otherwise will be Error.(For Basic Pay Infotype Wts)
If You insert 0-Specification for your wt it not(Amt) calculted in Valuaation Basis.
1-Specificaton for your wt the amt will be stored in /001
2-/002
3- /001&/002
In X013-Calculates rate into /001&/002.For this Specification will be 5 in PRCL-1
RTE-TSDIVP(Comes from Basic Pay Infotype Monthly Hrs)
DIVID ARR(AMT(?001&?002 (Wts Amt)/RATE(TSDIVP-Keeps in rate)
ZERO=A-It Makes amt has 0 in /001&/002
ADDWT *
I Hope it will use........!
Regards,
Chikky! -
Termination in operation Error in Payroll log
Hi Experts,
I am getting this error in Payroll log
Termination in operation ERROR
20141202
UNE1********* < ERROR NEG YTD IN TCRT NOT ALLOWED
Basic entry in IT :
/416 showing amount 9.50-
Please let me know how to resolve this issue.Hi,
You normally face such problem when empployee is moved from one tax authority to other.
Root cause of problem may be BTXRATE table is not maintaned properly.
Please refer to this document.
http://wiki.scn.sap.com/wiki/display/ERPHCM/Error+message+UNE1+ERROR+NEG+YTD+IN+TCRT+NOT+ALLOWED
Hope it will solve your problem.
Please keep us posted and once problem is resolved mark the answer correct to complete thread.
Regards,
Jignya -
Logical system entry for table entry
Hi,
After system copy from one system name to another , I am facing some inconsistenices in various tables.
The table entry can be seen in se16.But when I try to select entries from the same table using SELECT statement, table are not getting populated.
I ran the BDLS also . How do I check the logical system entried for table where I have inconsistent entries?
Thanks,
ChittaHello Chitta,
But when I try to select entries from the same table using SELECT statement, table are not getting populated.
what are you trying to populate?
If your question is, its not showing anything... what error message you're getting? are you trying to run in the DB level?
If you're getting error, that this object doesn't exist in the database then you might not be logging with correct user. its an SAP table, then its owner is the SAP schema user. If you login with the schema user, it should show in a normal select statement. But if you login with <sid>adm then you have to give the correct schema id before tablename.
select * from <SchemaID>.<tablename>
SchemaID may be sapr3, sapsr3, or sap<SID> depending on your release.
Regards,
Debasis. -
Problem with No entry in table T591B for 0015 08 E101
Hi all,
This is our first year using SAP and we're approaching our first Year End and so want to make the E Wage Types available for us in IT0015, E121 is already OK and I can enter data in IT0015 for that WT no problem. I've added WT E101 to the 0015 Additional Payments in the IMG and it shows as being allowed for IT0015, this has created entries in the Permissability, etc. in the IMG and I've updated permisability for the ESG to allow for all ESG / PS, etc. - so all looks fine when I work through the steps for Additional Payments in the IMG, but when I try to save E101 in IT0015 I get a message about 'No entry in table T591B for 0015 08 E101' .
When I look at this table it's called 'WT dependent retroactive accounting trigger' and I've not seen it before despite setting up many Wage Types and I can see E121 is in this table but E101 isn't - but I can't see how I can add or copy anything in this table - there are no options. So I'm assuming this is usually auto updated by creating an entry in another table but I have no idea how to find where and can't find any documentation or other forum messages for this table.
Has anyone else come accross this before or know anything about this table - has anyone else had trouble when wanting to allow E Wage Types to be used for Year End adjustments?
Thanks in advance for any advice anyone can give me
NyreeOlnly wt configured to be permissibled on a few infotypes (e.g. 0014, 0015, 0267) would need to be configured in V_T591B. The purpose of this is to control whether these wt are allowed to be changed after payroll is already run for the ee.
All you need to do is maintain this entry through view V_T591B - add entry for wt 'E101' for infotype 0015 / country '08'. The indicator (V5591B-ABWRU) can be '' (allow change to wt after proll is run), 'X' (warning if change after proll is run), 'E' (hard-error if change after payroll is run) .
Rgds. -
No entry in table $ for key $ 554C 400100 20090
Hi Gurus,
While running payroll--for some employees(pre . number 125) the following error is coming:
No entry in table $ for key $ 554C 400100 20090
Technical error no. 72
02.01.2009 Processing terminated for EE 00000125
This error is coming while I am applying Leave Without Pay (LWP).
If I delete the applied "Leave Without Pay " there is no error with the payroll run . It's working fine .
I want to see the effect what happened if I apply LWP whether Basic Pay is reducing or not .
Please help.
Thanks
Pramod SNo entry in table $ for key $ 554C 400100 20090
Check the Groupings for this employee in V_503_ALL
u have not assigned the Valuation rule
no if u are not applying to LWP the Basic pay will not get Reduced
Assign ur Absece Valuation to ur Absence type
Groupng problme kindly check
Edited by: Sikindar on Jun 17, 2009 1:02 PM -
No Entry in table for Key at T511K 40 GTMAX
Hi,
Iam doing Time evaluation with clock times...
While running RPTIME00 I am getting this error
" No Entry in table for key at t511k 40GT MAX "
What to do?kindly help
hr_userHi,
I guess you are configuring for Indian Payroll.The error says that in the table T511K,and for country grouping 40,the constant is GTMAX is missing.Please check the rule where the Timeevaluation is giving the error and look for the operation and this constant GTMAX find out for what the rule is looking for and based on that ,you need to create that constant.
I guess this is not GTMAX,but that is TGMAX which is for daily maximum hours and which will be checked by the rule TO21 in the schema TM00.
So what you need to do to solve this problem is.
1.Go to the table V_T511K with Tcode SM30.
2.Type in the country grouping 40
3.Then Create a constant TGMAX with the number hour maximum hour allowed in you company .
Hope it solves your problem.
Good Luck! -
No Entry in Table T030 Argument 1200 130 Fld: KONTS
Hello All,
while using Travel management on approving the trip I am getting the error
"No Entry in Table T030 Argument 1200 130 Fld: KONTS" I dont know whats going on with it and how can i get rid of this error.
Your help and advice would be highly appraciated.
RegardsHi,
Can you let me know which activity for Symbolic Accounts in the IMG you are referring to? I'm getting a similar error but don't see where the link is. I can see the activities to define symbolic accounts for payroll. How do the entries in T030 tie back to Travel Mgt?
Thanks for your help! -
No entry in table T554C for key 40 01 01 for time 26.08.2009
Hello experts,
I am simulating payroll, after entering an absence,
Its giving error like - No entry in table T554C for key 40 01 01 for time 26.08.2009
I have checked this table and there is entry for the respective absence.
Why still that error is coming ?
Will you please help me out to simulate my payroll with absence valuation ?
Thanks and Regards
Jaydeep JadhavHello Revathi,
thanks for replying me ...
yes ... i am using -ve time management.
my payroll schema name is ZN00
tc00 is commented already
system stops at Processing of time data PAB edit absence data
Thanks in advance.
Jaydeep Jadhav
Edited by: Jaysaphr on Aug 26, 2009 5:14 PM -
No entry in table $ for key $ 554C 1004
Hi Experts,
While running payroll--for some employees the following error is coming:
No entry in table $ for key $ 554C 1004
Technical error no. 72
18.04.2009 Processing terminated for EE
here date 18.04.2009 indicates that the EE has taken Privilege Leave on that day similarly the EEs who have taken privilage leaves/sick leaves in April the same error is coming.
Pls help to ressolve this issue as tis error is coming only for some employees not for all.
Thanls,
RajeshHi,
In the table V_T554L following are the values:
01 Unpaid Leave
02 Paid Leave
11 Unpaid Leave
12 Unpaid Leave (Half)
In table V_554S_G the values are:
Privilege Leave 01.01.1990 31.12.9999 02
Casual Leave 01.01.1990 31.12.9999 02
Sick leave 01.01.1990 31.12.9999 02
In table V_T554E the values are:
11 Unpaid absences
12 Unpaid absences (Half)
In table V_T554C the values are:
01 01 Unpaid Leave 01.01.1990 31.12.9999
01 11 Unpaid Leave 01.01.1990 31.12.9999
01 12 Unpaid Leave (Half) 01.01.1990 31.12.9999
I think I have maintained all the groupings even though the error is coming for PL,SLand CL.
Regards,
Rajesh
Maybe you are looking for
-
Hi, is anyone experienced in boosting performance of large message processing in XI? I've got messages of about 3MB size. Their processing in XI takes about 5 minutes. The respective mappings are quite simple. I have seen that I can configure a speci
-
Screen goes dark/ black in startup.
My computer is a 2008 Macbook. It was working perfectly until summer 2011 when the battery died. I brought it to Apple and they did some diagnostic tests, whereupon I was told that everything worked perfectly except for the faulty battery. Instead
-
Erroneous Receipt No assigned to payment document
Hi, When generating an Official Receipt (OR) for the collection, the series number assigned by the system to the specified document number was erroneous. Example: Receipt Lot Number = 0158 Series Number = 02000001 - 02999999 I displayed the generated
-
Outlook all day events are one day early in ipod touch calendar...
I recently bought an ipod touch 4th generation, when I tried to sync my outlook 2007 calendar all my all-day-events came up as a whole day early on my ipod touch. I'm running iOS Version: 4.3.5 and App Version: 3.3, outlook 2007 off windows 7. I see
-
I upgraded our RM Server from 2013 Update 2 to Update 4. During smoke testing, I discovered that the RM approval website would get stuck and display a loading wheel when showing the list of releases. After rebooting the server and uninstalling and re