No ifIndex table when querying via SNMP

Hello, looking for suggestions before opening up a TAC case.
Just received a Nexus 3000 with NX-OS 6.0(2)U2(1) and when I attempt to walk the ifTable via SNMP the ifIndex table is not present. Walking the ifIndex table itself results in "IF-MIB::ifIndex = No Such Instance currently exists at this OID". show interface snmp-ifindex is fine and the rest of the ifTable displays properly.
My switch config is just a basic RO community with no ACL's or anything yet. A pair of the same switches with NX-OS 5.0(3)U5(1a) display the table no problem.
Any suggestions, or has anyone else seen this?

Did you navigate the FireFox plugin to the DB file that is in the Simulator app bundle:
/Users/YOURUSERID/Library/Application Support/iPhone Simulator/User/Applications/SYSTEMGENERATED_NAME/YOURAPP.app
or
/Users/YOURUSERID/Library/Application Support/iPhone Simulator/User/Applications/SYSTEMGENERATEDNAME/Documents
Message was edited by: xnav

Similar Messages

Duplicate Entries in Flashback Table when queried using as of timestamp

Hi All,
Oracle Version : Oracle Server - Enterprise Edition 11.1.0.7
OS: HP-UX PA-RISC (64-bit)
We have a table name DIRECTORY_LISTING_GROUP with HEADER_KEY as primary key.
So when i query like this
SELECT * FROM DIRECTORY_LISTING_GROUP AS OF TIMESTAMP TO_TIMESTAMP('05-NOV-12 10:00:00','DD-MON-YY HH24:MI:SS') WHERE HEADER_KEY=#
Ideally i should get only one row but i m getting two rows which are exactly the same.
Please advice

Peter vd Zwan wrote:
Hi,
Maybe it is a primary key now but are you sure it was a primary key at 05-NOV-12 10:00:00 ?If it was not primary key at 05-NOV-12 10:00:00, and now it is,
which implies primary key constraint was added using ALTER TABLE command.
But using ALTER TABLE command would invalidate the undo data for that table. And using the flashback query would generate exception something like "table definition has changed".

Lost index stats in Ora 8.1.6 Tables when selecting via jdbc

Hi,
i'm using JBuilder8 and Kylix2 on a Linux machine with Oracle oci drivers of client 8.1.7.
The connect through JB8 jdbc via DBPilot is succesful and shows the tables of the db.
After executing a select on any table the index stats of this table are lost.
Kylix works fine without this failure.
Thanks for any comments to this problem
Jens

Well, it's not the PL/SQL code that is causing a problem. Everything worked fine for many months. Then one day (without any changes in the environment or code) the update of a table from a java application (via JDBC) fails. The same update done directly on the DB with SQL Plus still succeeds!
This led us to think that something is wrong with the JDBC connection (which was up for several months). Maybe a memory corruption?
Anyone that experienced similar problems with JDBC?

MIBS to Monitor Etherchannel and trunks via SNMP

I would like to monitor the status of etherchannel and trunk configurations in 6500 Catalyst switches running both CATOS and IOS. I would like to understand the specific mibs/OIDS that should be monitored for etherchannels and trunks. I am trying to get a better handle on tracking the etherchannels and trunk dynamically and then understanding when the ports are having issues (up/down and errors). I need to understand how to differentiate these type of ports from regular access ports.
Thanks,
Tim

Hi Tim,
what exactly do you want to query via SNMP?
For an (PAgP) Etherchannel, the member-interfaces might be interesting:
https://supportforums.cisco.com/message/3957914#3957914
For a trunk, you could start with the operational mode, depending on the platform you can use:
vlanTrunkPortDynamicStatus (CISCO-VTP-MIB):
vlanTrunkPortDynamicStatus.49 = notTrunking
vlanTrunkPortDynamicStatus.50 = trunking
vlanPortIslOperStatus (CISCO-STACK-MIB):
vlanPortIslOperStatus.13.43 = notTrunking
vlanPortIslOperStatus.13.44 = trunking
Hope that helps
Rolf

Strange explain plan when query SYS tables

Oracle Version 9.2.0.7
We have an application that runs the following query on Oracle 9.2.0.7
SELECT T1.TABLE_NAME,T1.COLUMN_NAME, T1.SRID, T2.SDO_UB, T2.SDO_LB, T1.OWNER FROM ALL_SDO_GEOM_METADATA T1, TABLE(T1.DIMINFO) T2 WHERE T1.OWNER=UPPER(:"SYS_B_0") AND T1.TABLE_NAME=UPPER(:"SYS_B_1")
Without the self join the query is fine, but with the self join on our customers database the explain plan is doing full table scans and Hash Joins on SYS tables and takes 2 minutes.
Rows Row Source Operation
2 FILTER
2 NESTED LOOPS
1 TABLE ACCESS FULL SDO_GEOM_METADATA_TABLE
2 COLLECTION ITERATOR PICKLER FETCH
1 UNION-ALL
0 FILTER
0 NESTED LOOPS OUTER
0 HASH JOIN
37 TABLE ACCESS FULL TS$
0 HASH JOIN OUTER
0 NESTED LOOPS OUTER
0 NESTED LOOPS OUTER
0 NESTED LOOPS
1 NESTED LOOPS
1 TABLE ACCESS BY INDEX ROWID USER$
1 INDEX UNIQUE SCAN I_USER1 (object id 44)
1 TABLE ACCESS BY INDEX ROWID OBJ$
1 INDEX RANGE SCAN I_OBJ2 (object id 37)
0 TABLE ACCESS CLUSTER TAB$
1 INDEX UNIQUE SCAN I_OBJ# (object id 3)
0 TABLE ACCESS CLUSTER SEG$
0 INDEX UNIQUE SCAN I_FILE#_BLOCK# (object id 9)
0 TABLE ACCESS BY INDEX ROWID OBJ$
0 INDEX UNIQUE SCAN I_OBJ1 (object id 36)
0 TABLE ACCESS FULL USER$
0 INDEX UNIQUE SCAN I_OBJ1 (object id 36)
0 NESTED LOOPS
0 FIXED TABLE FULL X$KZSRO
0 INDEX RANGE SCAN I_OBJAUTH2 (object id 109)
0 FIXED TABLE FULL X$KZSPR
0 FILTER
0 NESTED LOOPS OUTER
0 HASH JOIN
54 TABLE ACCESS FULL USER$
0 HASH JOIN
29447 TABLE ACCESS FULL OBJ$
0 HASH JOIN OUTER
0 HASH JOIN OUTER
0 HASH JOIN OUTER
0 NESTED LOOPS
0 NESTED LOOPS OUTER
0 NESTED LOOPS OUTER
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
1 NESTED LOOPS
1 TABLE ACCESS BY INDEX ROWID USER$
1 INDEX UNIQUE SCAN I_USER1 (object id 44)
1 TABLE ACCESS BY INDEX ROWID OBJ$
1 INDEX RANGE SCAN I_OBJ2 (object id 37)
0 TABLE ACCESS CLUSTER TAB$
1 INDEX UNIQUE SCAN I_OBJ# (object id 3)
0 TABLE ACCESS CLUSTER TS$
0 INDEX UNIQUE SCAN I_TS# (object id 7)
0 TABLE ACCESS CLUSTER COL$
0 TABLE ACCESS CLUSTER SEG$
0 INDEX UNIQUE SCAN I_FILE#_BLOCK# (object id 9)
0 TABLE ACCESS BY INDEX ROWID OBJ$
0 INDEX UNIQUE SCAN I_OBJ1 (object id 36)
0 TABLE ACCESS CLUSTER COLTYPE$
0 TABLE ACCESS FULL USER$
0 TABLE ACCESS FULL OBJ$
0 TABLE ACCESS FULL USER$
0 INDEX UNIQUE SCAN I_OBJ1 (object id 36)
0 NESTED LOOPS
0 FIXED TABLE FULL X$KZSRO
0 INDEX RANGE SCAN I_OBJAUTH2 (object id 109)
0 FIXED TABLE FULL X$KZSPR
1 FILTER
1 NESTED LOOPS
1 NESTED LOOPS OUTER
1 NESTED LOOPS
1 TABLE ACCESS BY INDEX ROWID USER$
1 INDEX UNIQUE SCAN I_USER1 (object id 44)
1 TABLE ACCESS BY INDEX ROWID OBJ$
1 INDEX RANGE SCAN I_OBJ2 (object id 37)
0 INDEX UNIQUE SCAN I_TYPED_VIEW1 (object id 105)
1 INDEX UNIQUE SCAN I_VIEW1 (object id 104)
0 NESTED LOOPS
0 FIXED TABLE FULL X$KZSRO
0 INDEX RANGE SCAN I_OBJAUTH2 (object id 109)
0 FIXED TABLE FULL X$KZSPR
On our development database it takes 0.07 sec with no full table scans and no hash joins.
Rows Row Source Operation
2 NESTED LOOPS
1 TABLE ACCESS BY INDEX ROWID SDO_GEOM_METADATA_TABLE
1 INDEX RANGE SCAN SDO_GEOM_IDX (object id 36753)
1 UNION-ALL
0 FILTER
0 NESTED LOOPS
0 NESTED LOOPS OUTER
0 NESTED LOOPS OUTER
0 NESTED LOOPS OUTER
0 NESTED LOOPS OUTER
0 NESTED LOOPS
1 NESTED LOOPS
1 TABLE ACCESS BY INDEX ROWID USER$
1 INDEX UNIQUE SCAN I_USER1 (object id 44)
1 TABLE ACCESS BY INDEX ROWID OBJ$
1 INDEX RANGE SCAN I_OBJ2 (object id 37)
0 TABLE ACCESS CLUSTER TAB$
1 INDEX UNIQUE SCAN I_OBJ# (object id 3)
0 TABLE ACCESS BY INDEX ROWID OBJ$
0 INDEX UNIQUE SCAN I_OBJ1 (object id 36)
0 INDEX UNIQUE SCAN I_OBJ1 (object id 36)
0 TABLE ACCESS CLUSTER USER$
0 INDEX UNIQUE SCAN I_USER# (object id 11)
0 TABLE ACCESS CLUSTER SEG$
0 INDEX UNIQUE SCAN I_FILE#_BLOCK# (object id 9)
0 TABLE ACCESS CLUSTER TS$
0 INDEX UNIQUE SCAN I_TS# (object id 7)
0 NESTED LOOPS
0 FIXED TABLE FULL X$KZSRO
0 INDEX RANGE SCAN I_OBJAUTH2 (object id 109)
0 FIXED TABLE FULL X$KZSPR
0 FILTER
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS OUTER
0 NESTED LOOPS OUTER
0 NESTED LOOPS OUTER
0 NESTED LOOPS OUTER
0 NESTED LOOPS OUTER
0 NESTED LOOPS OUTER
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
1 NESTED LOOPS
1 TABLE ACCESS BY INDEX ROWID USER$
1 INDEX UNIQUE SCAN I_USER1 (object id 44)
1 TABLE ACCESS BY INDEX ROWID OBJ$
1 INDEX RANGE SCAN I_OBJ2 (object id 37)
0 TABLE ACCESS CLUSTER TAB$
1 INDEX UNIQUE SCAN I_OBJ# (object id 3)
0 TABLE ACCESS CLUSTER TS$
0 INDEX UNIQUE SCAN I_TS# (object id 7)
0 TABLE ACCESS CLUSTER COL$
0 TABLE ACCESS CLUSTER COLTYPE$
0 TABLE ACCESS CLUSTER SEG$
0 INDEX UNIQUE SCAN I_FILE#_BLOCK# (object id 9)
0 TABLE ACCESS BY INDEX ROWID OBJ$
0 INDEX UNIQUE SCAN I_OBJ1 (object id 36)
0 TABLE ACCESS CLUSTER USER$
0 INDEX UNIQUE SCAN I_USER# (object id 11)
0 TABLE ACCESS BY INDEX ROWID OBJ$
0 INDEX UNIQUE SCAN I_OBJ1 (object id 36)
0 TABLE ACCESS CLUSTER USER$
0 INDEX UNIQUE SCAN I_USER# (object id 11)
0 INDEX UNIQUE SCAN I_OBJ1 (object id 36)
0 TABLE ACCESS BY INDEX ROWID OBJ$
0 INDEX RANGE SCAN I_OBJ3 (object id 38)
0 TABLE ACCESS CLUSTER USER$
0 INDEX UNIQUE SCAN I_USER# (object id 11)
0 NESTED LOOPS
0 FIXED TABLE FULL X$KZSRO
0 INDEX RANGE SCAN I_OBJAUTH2 (object id 109)
0 FIXED TABLE FULL X$KZSPR
1 FILTER
1 NESTED LOOPS
1 NESTED LOOPS OUTER
1 NESTED LOOPS
1 TABLE ACCESS BY INDEX ROWID USER$
1 INDEX UNIQUE SCAN I_USER1 (object id 44)
1 TABLE ACCESS BY INDEX ROWID OBJ$
1 INDEX RANGE SCAN I_OBJ2 (object id 37)
0 INDEX UNIQUE SCAN I_TYPED_VIEW1 (object id 105)
1 INDEX UNIQUE SCAN I_VIEW1 (object id 104)
0 NESTED LOOPS
0 FIXED TABLE FULL X$KZSRO
0 INDEX RANGE SCAN I_OBJAUTH2 (object id 109)
0 FIXED TABLE FULL X$KZSPR
2 COLLECTION ITERATOR PICKLER FETCH
ALL_SDO_GEOM_METADATA is a view in the MDSYS schema (generated by Oracle ).
SELECT SDO_OWNER OWNER,
SDO_TABLE_NAME TABLE_NAME,
SDO_COLUMN_NAME COLUMN_NAME,
SDO_DIMINFO DIMINFO,
SDO_SRID SRID
FROM SDO_GEOM_METADATA_TABLE
WHERE
(exists
(select table_name from all_tables
where table_name=sdo_table_name
and owner = sdo_owner
union all
select table_name from all_object_tables
where table_name=sdo_table_name
and owner = sdo_owner
union all
select view_name table_name from all_views
where view_name=sdo_table_name
and owner = sdo_owner))
Statistics have been gathered for the MDSYS user.
If this had not been SYS schema I would have immediately concluded that fresh statistics are required. The SYS objects concerend are valid with all indexes
From my understanding you are not meant to gather stats for the SYS schema in Oracle 9 as Data Dictionary queries still uses RBO?
Any ideas as to why Oracle is doing full table scans when querying SYS tables? The optimizer_mode is set to FIRST_ROWS.
Any ideas greatly recevied.
Thanks

Maybe I'm missing something but this:
INDEX FULL SCAN SISESTAT I0_ESTRUTURA_COMERCIALindicates that one of those indexes is being used.
This:
T_ESTRUTURA_COMERCIALIs nowhere to be found in your Explain Plan. It appears that either you have posted the wrong plan
or Oracle is doing a query rewrite to a materialized view.

ORA-00604 ORA-00904 When query partitioned table with partitioned indexes

Got ORA-00604 ORA-00904 When query partitioned table with partitioned indexes in the data warehouse environment.
Query runs fine when query the partitioned table without partitioned indexes.
Here is the query.
SELECT al2.vdc_name, al7.model_series_name, COUNT (DISTINCT (al1.vin)),
al27.accessory_code
FROM vlc.veh_vdc_accessorization_fact al1,
vlc.vdc_dim al2,
vlc.model_attribute_dim al7,
vlc.ppo_list_dim al18,
vlc.ppo_list_indiv_type_dim al23,
vlc.accy_type_dim al27
WHERE ( al2.vdc_id = al1.vdc_location_id
AND al7.model_attribute_id = al1.model_attribute_id
AND al18.mydppolist_id = al1.ppo_list_id
AND al23.mydppolist_id = al18.mydppolist_id
AND al23.mydaccytyp_id = al27.mydaccytyp_id
AND ( al7.model_series_name IN ('SCION TC', 'SCION XA', 'SCION XB')
AND al2.vdc_name IN
('PORT OF BALTIMORE',
'PORT OF JACKSONVILLE - LEXUS',
'PORT OF LONG BEACH',
'PORT OF NEWARK',
'PORT OF PORTLAND'
AND al27.accessory_code IN ('42', '43', '44', '45')
GROUP BY al2.vdc_name, al7.model_series_name, al27.accessory_code

I would recommend that you post this at the following OTN forum:
Database - General
General Database Discussions
and perhaps at:
Oracle Warehouse Builder
Warehouse Builder
The Oracle OLAP forum typically does not cover general data warehousing topics.

Initial selection screen missing when execting a query via web

Hello all.
We have a problem when we try to execute a query in web. We developped queries via query designer and we published all in a role. By doing it system generates a link that makes possible to execte this query via web. The issue is that sometimes the initial selection screen doesn´t appear (and the variables are "ready to input".
Could anybody help me?
Thanks in advance.

Dear Carmen Rodríguez,
In the WAD properties of the webtemplate.. carefully look for 'Force Variable Screen' Check that option..
Save and rerun the same.. it should be able to see the screen after that..
regards,
Hari

The query does not reference any table when attempting to build the WHERE clause. (IES 00022)

Hi
I am getting below error.
The query does not reference any table when attempting to build the WHERE clause. (IES 00022)
This error is in Validating Measue object in IDT.
It is not throwing error for dimensions objects but only for measure objects.
My BO version is 4.1
Backend is Teradata 14.1.
Regards
Gaurav.

Hi
In the dimension/Measure definition, you can select the table. Find the below screenshot.
If you still getting the issue…Can you please share your screenshot, for better understanding the issue?

Grab ARP Table via SNMP on HP v1910 switch?

Hello, Just as the topic says, is it possible to grab the ARP table from an HP v1910 switch via SNMP? I'm currently writing a python script that will provide the user IP address to port mappings. Any suggestions are welcome. Thanks in advance!

Hi: You may also want to post your question on the HP Enterprise Business Community support forum -- Procurve Switches section. http://h30499.www3.hp.com/t5/ProCurve-ProVision-Based/bd-p/switching-e-series-forum#.VaKx2ofbLGg

Monitor OSPFv3 via SNMP not working - Is OSPFv3 MIB supported?

I need to be able to query the OSPFv3-MIB via SNMP to track the status of OSPFv3.
I have setup a 3945 router in a test lab network and I have configured it in an Ipv6 network with OSPFv3. The router has an active OSPFv3 neighbor and I can use that neighbor to send/receive data (the routing is working fine). However, when I walk the SNMP MIBs I don't get a response for the OSPFv3-MIB. According to the Cisco SNMP Object Navigator this MIB should be located at 1.3.6.1.3.102.*. Below is an example trying to query a particular OID from the OSPFv3 MIB.
C:\>snmpwalk -v 2c -c public 197.16.18.1 1.3.6.1.3.102.1.5.1.8
SNMPv2-SMI::experimental.102.1.5.1.8 = No Such Object available on this agent at this OID
I can walk other parts of the MIB (For example the OSPFv2 MIB) and get responses, so I know the router has SNMP turned on.
Looking at the Cisco IOS Mib Locator tool (http://tools.cisco.com/ITDIT/MIBS/MainServlet?IMAGE_NAME=c3900-universalk9-mz.SPA.152-4.M3.bin) for the current software version I am running (c3900-universalk9-mz.SPA.152-4.M3.bin) on a 3945 router it claims that the OSPFv3 MIB is supported in this image.
Maybe I need to configure something else? Maybe my SW doesn't really support this MIB? Could it be that I have to query the router over Ipv6 to get the OSPFv3-MIB (I have only been trying Ipv4)?

Hi ,
As Vinod suggested , you need to configure the "SNMP CONTEXT"
Configure:
==========
Basic configuration consists of 4 steps:
Configure mapping between VRF name and SNMP context :
snmp-server vrf <vrf_1> context <context_1>
Create community string corresponding to the VRF :
snmp-server community <vrf_1> RW
Define context string
snmp-server context <context_1>
Configure mapping between context and community:
snmp-server community-map <vrf_1> context <context_1>
(optional) Configure snmp server traps for this VRF community
snmp-server host <IP> traps version 2c <vrf_1>
For e.g:
snmp-server vrf miki
context miki_bgp
snmp-server community miki RW
snmp-server context miki_bgp
snmp-server community-map miki context miki_bgp
Hope it will help
Thanks-
Afroz
***Ratings Encourages Contributors ***

Cannot add column to flexible table when ddl autocommit is off using Procedure

Hello All,
Through procedure I am trying to insert data into the target(EX_92) table(with schema flexibility)
Source table data
ID
PRODUCT_CODE
PRODUCT_NAME
PRICE
COLOR
TYPE
1
1
rugg
101.22
2
1
rugg
101.22
3
2
book
200.32
BLUE
Y
Target table QUERY
drop table EX_P2;
CREATE COLUMN TABLE EX_P2(
ID INTEGER PRIMARY KEY,
PRODUCT_CODE VARCHAR(3),
PRODUCT_NAME NVARCHAR(20),
PRICE DECIMAL(5,2)
) WITH SCHEMA FLEXIBILITY;
Procedure to insert above records with additional columns into the target table(EX_P2)
Procedure
drop procedure "DS_O1"."PROC";
create procedure "DS_O1"."PROC"(IN max_value INTEGER, IN schema_name varchar(40), IN table_name varchar(40), IN column_list varchar(400))
LANGUAGE SQLSCRIPT AS
BEGIN
DECLARE maxid integer :=0;
DECLARE INSERT_STR VARCHAR(1000) :='';
select max(ID) into maxid from "DS_O1"."EX_P2";
select :maxid from dummy;
INSERT_STR :='insert into "' || 'DS_O1' ||'"."EX_P2" ('||:column_list||') (select ' ||:column_list||'
FROM "'||:schema_name||'"."'||:table_name||'"' || ' where ID >' || :max_value || ')';
EXECUTE immediate(:INSERT_STR);
END;
Now while executing above procedure
CALL "DS_O1"."PROC" ( 0, 'DS_O1', 'TMP_EXL2','ID,PRODUCT_CODE,PRODUCT_NAME,PRICE,COLOR,STATUS,TYPE');
I am getting the following error
Could not execute 'CALL "DS_O1"."PROC" ( 0, 'DS_O1', 'TMP_EXL2','ID,PRODUCT_CODE,PRODUCT_NAME,PRICE,COLOR,STATUS,TYPE')' in 23 ms 564 µs .
SAP DBTech JDBC: [7]: feature not supported: [7] "DS_O1"."PROC": line 18 col 1 (at pos 779): [7] (range 3): feature not supported: cannot add column to flexible table when ddl autocommit is off

Hi Rajnish,
I had the same issue. For what it’s worth I was able to do a workaround basically creating all the columns when I create the table. The following code works for me to create the table which is just a matrix with one Integer column as the key and the rest as type Double.
It is not ideal in all scenarios because the table columns cannot be added dynamically via a procedure at a later point. This table has 27K columns now
Of course one of the advantages of a flex table would be programmatically adding columns dynamically. This works, but maybe there is still a way to add columns dynamically from a procedure, and someone else can advise.
Apparently dynamically adding columns via procedures may have some "minor" limitations due to the need to compile the procedure with knowledge of the flex table DDL. But again, hopefully someone knows another solution.
Best regards,
Mark
DROP PROCEDURE CREATE_MATRIX;
CREATE PROCEDURE CREATE_MATRIX(
    LANGUAGE SQLSCRIPT
    SQL SECURITY INVOKER
    AS
/*********BEGIN PROCEDURE SCRIPT ************/
BEGIN
    -- cursor over messages
    declare cursor matrix_cursor for
        select distinct TERM
        from TERMS
        order by term;
       declare cnt INTEGER := 0;
       declare temptxt NVARCHAR(500000) := 'CREATE COLUMN TABLE DOC_MATRIX ( CONTENT_ID INTEGER ';
    for cur_matrix as matrix_cursor do
      cnt:=:cnt + 1;
           select temptxt || ', C' || cnt || ' DOUBLE' into temptxt from dummy;
    end for;
      temptxt:=temptxt || ' ) WITH SCHEMA FLEXIBILITY';
       EXEC :temptxt;
       select :temptxt from dummy;
END;
DROP TABLE DOC_MATRIX;
CALL CREATE_MATRIX();

Backup ifIndex-table

Hi,
I will perform backup data for a Catalyst switch failure.
SNMP agent feature is enabled on the switch, and the switch is configured the following configuration:
snmp-server ifindex persist
Should I backup nvram:ifIndex-table from the switch for a cold standby switch?
Thank you for your cooperation in advance.

Hi,
The SNMP ifIndex persistence retains the interface index (ifIndex) value when the switch reboots. Only on cisco 3745 have observed this to be not working. Not sure why are you planning for a backup.
Regards,
Sathvik

Execute BW Query Via RFC

Hi all.
im traying to execute a BW query via an RFC ussing FM RRW3_GET_QUERY_VIEW_DATA.
CALL FUNCTION 'RRW3_GET_QUERY_VIEW_DATA'
     EXPORTING
     i_infoprovider        =
       i_query                =
       i_view_id              =
       i_t_parameter       =
     IMPORTING
       e_axis_info           =
       e_cell_data           =
       e_axis_data          =
       e_txt_symbols       =
     EXCEPTIONS
       no_applicable_data      = 1
       invalid_variable_values = 2
       no_authority            = 3
       abort                   = 4
       invalid_input           = 5
       invalid_view            = 6
       OTHERS                  = 7.
my query have two parameters. im puttings this valuen into table i_t_parameter , but at the momento of query execution, this values are not used like parameters never send to query.
when debug my RFC, i can see that those values are passing to FM.
Any Idea???

try this blog.
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii

Execute BEX Query via Function Module

Hi Mates,
I want to execute BEX query via a Function Module.
Also i want to explore whether the input parameters of the query can be retrieved from a Database Table.
Please let me know how this can be achieved.
Thanks in advance.
Regards,
Hrishikesh

Hi Hrishikesh,
Assuming you have the necessary ABAP knowledge, you will have to code the exit in the include ZXRSRU01 under I_STEP = 1 (this is because you want to prepopulate your parameters from the values in your DB table).
Your DB table has Key1, Key2 and Your field as the three fields and you want to read the value of 'Your Field' based on your keys Key1 and Key2.
So, the code will be something like -
when 'Your variable'.
if i_step = 1.
select single 'Your field' from 'Your DB table' into lv_your_field where Key 1 = 'X' and
key 2 = 'Y'.
clear l_s_range.
l_s_range - low = lv_your_field.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
append l_s_range to e_t_range.
endif.

Is there opportunity to backup WLC6 via SNMP

Hello!
I have NM-AIR-WLC6-K9 in Cisco 2821. Is there opprotunity to retreive configuration via SNMP as from Cisco Catalyst 2960?
Kind regards,
Ellad

Ellad,
WCS and NCS use SNMP to fetch the configuration from WLCs. This happens when you manually go to Configure Controllers --> Refresh Config from Controller from the WCS/NCS dashboard. (You can also use Background Tasks to automatically backup controller configs on a schedule, which is done using a combination of SNMP and T/FTP).
If you look at a packet sniff of the traffic between the controller and WCS/NCS during this process you will see several hundred SNMP Gets and Responses. What appears to be happening is that the configuration is being pulled piece by piece from the controller, and not as one gigantic configuration file in a single SNMP query. Based on what I see in the sniffer capture, I think it would be a significant undertaking to try to do this with a 3rd party tool or a custom script.
As an alternative, you may also find automated backups using SSH scripts and TFTP or FTP, which we recently talked about in another discussion:
https://supportforums.cisco.com/message/3577890#3577890
This is what the Controller Configuration Backup background task edit window looks like in NCS:
Justin

No ifIndex table when querying via SNMP

Similar Messages

Maybe you are looking for