No matching values were found ... security issue??? help

Hi,
A few days ago when I added multiple students with Quick Enroll a Student I could see them from Campus Community or Quick Enroll -> Find an Existing Value.
Then I created, from Application Designer, some groups with special access to Tree Manager and also 2 interface components for existing components (subjects and courses).
But when tried Quick Enroll -> Find an Existing Value again it didn't return any results: "no matching values were found".
From Campus Community is the same result, no match.
I deleted both the groups and the component interfaces created, but the result is the same, I can not view my enrolled students anymore. What could be the problem? Some security problem?
I have Read/Write to the Academic Institution, the Campus, the Academic Organization, all Academic Careers, Programs, and Plans.
Thank you,
Anda

You mean to see if the students exist in the database? The answer is yes, they do exist.
One more thing, I can see the enrolled students from
Record and Enrollment -> Enroll Students -> Enrollment Request Search
But from
Record and Enrollment -> Enroll Students -> Enrollment I can't see them.
Any suggestion is appreciated, thank you!
Anda

Similar Messages

WCS#2009.10.20.11.20.34: No matching users were found with search string ..

Hi,
I setup my webcenter spaces using OID. I used the console application to setup OIDAuthenticator. I can see OID users and groups in the console application. I can also login to webcenter spaces using any of the OID user. But when I try to create a page in webcenter spaces I get error
WCS#2009.10.20.11.20.34: No matching users were found with search string ..
Also, when I try to change permission grants for a given page in webcenter spaces using 'Set Page Access' I cannot search for any of the OID users.
I have modified my jps-config.xml to add
     <property name="username.attr" value="uid"/>
<property name="user.login.attr" value="uid"/>
inside the 'idstore.ldap' serverInstance as mentioned in the document. But stilll it does not work.
Can anybody help me..
I see the following error in my WLS_Spaces-diagnostic.log
[2009-10-20T11:20:34.203-05:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: executive] [ecid: 0000IHmjzSbFg4WFLzyGOA1ArTye00000E,0] [APP: webcenter] WCS#2009.10.20.11.20.34: No matching users were found with search string executive
[2009-10-20T11:20:34.203-05:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: executive] [ecid: 0000IHmjzSbFg4WFLzyGOA1ArTye00000E,0] [APP: webcenter] [[
oracle.webcenter.webcenterapp.security.WCSecurityException: No matching users were found with search string executive
     at oracle.webcenter.webcenterapp.model.security.WebCenterSecurityUtils.getPrincipal(WebCenterSecurityUtils.java:494)
     at oracle.webcenter.webcenterapp.model.security.WebCenterSecurityUtils.getUserPrincipal(WebCenterSecurityUtils.java:377)
     at oracle.webcenter.webcenterapp.internal.view.shell.WebCenterPagesManagerImpl._grantCustomPermission(WebCenterPagesManagerImpl.java:650)
     at oracle.webcenter.webcenterapp.internal.view.shell.WebCenterPagesManagerImpl.createPersonalPage(WebCenterPagesManagerImpl.java:582)
     at oracle.webcenter.webcenterapp.internal.view.backing.BoilerplateBean._createPage(BoilerplateBean.java:818)
     at oracle.webcenter.webcenterapp.internal.view.backing.BoilerplateBean.clickCreatePageFromWizard(BoilerplateBean.java:947)
     at oracle.webcenter.webcenterapp.internal.view.backing.BoilerplateBean.clickCreatePageFromWizard(BoilerplateBean.java:929)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1282)
     at oracle.adf.view.rich.component.UIXDialog.broadcast(UIXDialog.java:81)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:145)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:145)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:87)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:87)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:298)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:91)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:81)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:787)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:280)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterShellPageRedirectionFilter.doFilter(WebCenterShellPageRedirectionFilter.java:210)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterShellFilter.doFilter(WebCenterShellFilter.java:603)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
     at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.processFilters(WebCenterLocaleWrapperFilter.java:256)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.doFilter(WebCenterLocaleWrapperFilter.java:228)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.security.idm.ObjectNotFoundException: No User found matching the criteria
     at oracle.security.idm.providers.stdldap.util.DirectSearchResponse.initSearch(DirectSearchResponse.java:171)
     at oracle.security.idm.providers.stdldap.util.NonPagedSearchResponse.<init>(NonPagedSearchResponse.java:52)
     at oracle.security.idm.providers.stdldap.util.NonPagedSearchResponse.<init>(NonPagedSearchResponse.java:43)
     at oracle.security.idm.providers.stdldap.util.LDAPRealm.searchUsers(LDAPRealm.java:480)
     at oracle.security.idm.providers.stdldap.LDIdentityStore.search(LDIdentityStore.java:265)
     at oracle.security.idm.providers.stdldap.LDIdentityStore.searchUsers(LDIdentityStore.java:358)
     at oracle.webcenter.framework.service.Utility.getUserFromUserName(Utility.java:571)
     at oracle.webcenter.webcenterapp.model.security.WebCenterSecurityUtils.searchUser(WebCenterSecurityUtils.java:315)
     at oracle.webcenter.webcenterapp.model.security.WebCenterSecurityUtils.getPrincipal(WebCenterSecurityUtils.java:486)

I have run dead smack into this issue using AD also. Is there a solution? I have tried all of the options for the following settings which seem to control the look up process:
<property name="username.attr" value="cn"/>
<property name="user.login.attr" value="sAMAcountName"/>.
For me, this issue rears its ugly head when attempting to add a role to an AD user. I can enter the login name in the find user box, click the find button, and the user is found. I select the user, pick the role, click "Add Member(s)", and then bam "No matching users were found with search string <login user>" message.
Based on my analysis of the problem, my guess would be that the look up process, which works, differs from the role assignment process in source of data and/or the key-field used to find a match.
Any help would be greatly appreciated.
Thanks In Advance.

No operand values were found for operand MET_KVAT2C

Hi,
I am getting following error while doing billing,
pls help....
No operand values were found for operand MET_KVAT2C
Message no. AJ013
Diagnosis
No operand value was found for operand MET_KVAT2C for the period 03.06.2009 -- 24.06.2009.
Procedure
Assign a value to the operand in the conditions, rate category facts or installation facts.
(Note: Additional information regarding this error can be found in the details for this message.)
Regards,
Chetan

Hi Rajesh,
I Checked the registers , there are 10 register of which 4 for demand.
Here DEMAND14 is used for taking the readings from the registers and then converting it to the normal operand
Below is the part of schema :
DEMAND09     01     MET_KVA          FACTOR100%          MET_KVAT2A
DEMAND14     01     MET_KVAT2A               MET_KVAT2A
DEMAND09     03     MET_KVA          FACTOR100%          MET_KVAT2C
DEMAND14     01     MET_KVAT2C               MET_KVAT2C
DEMAND09     03     MET_KVA          FACTOR100%          MET_KVAT2D
DEMAND14     01     MET_KVAT2D               MET_KVAT2D
DEMAND09     03     MET_KVA          FACTOR100%          MET_KVAT2B
DEMAND07     01     MET_KVAT2B     MET_KVAT2C          MAX_KVA2
DEMAND07     01     MAX_KVA2     MET_KVAT2D          MAX_KVA2
The meter reading results ar maintained. also i maintained MET_KVAT2C value at rate category level. in this case the system found the value but then it is not geting value for MAX_KVA2.
I suppose this value should be passed from meter reading.
Also can you pls tell me what is Assign a value to the operand in the conditions in the error.
Regards,
Chetan

No operand values were found for operand EQPRICEIN1

Hi,
I am getting following error while doing billing,
plz help....
No operand values were found for operand EQPRICEIN1
Message No. AJ013
Diagnosis
No operand value was found for operand EQPRICEIN1 for the period 30.04.2015 -- 31.05.2015.
Procedure
Assign a value to the operand in the conditions, rate category facts or installation facts.
(Note: Additional information regarding this error can be found in the details for this message.)

Hi Kailash,
You are getting this error because the billing schema is calling variant EQPRICEIN1 for a calculation purpose and it is not being found.
You need to check at the Installation where this operand is maintained (at the rate, rate category or Installation fact) and maintain a value for the period that is not being found. (30.04.2015 - 31.05.2015).
Billing after making this update should solve your problem.
Regards,
Monis Shakeel

Mac Pro - Bootcamp Windows 7 x64 problem. No Drives were found. Please help

Hi,
I have recently purchase a Mac Pro and I was trying to install windows 7 with bootcamp which i successfully done it on my imac before but somehow after I partition my HDD in bootcamp, inside winodws 7 install page it saids "No drives were found. Click Load Driver to provide a mass storage driver for installtion"
I have read some previous post but I didn't really get it how people have solved. I have dismount the other 2 HDD but it doesn't seems to work.
Can someone please help. Is there a way that I can have my windows 7 into my other HDD instead of the Mac OS drives.

You read the PDF Guide? You have to use Advanced Options to format the FAT volume (BOOTCAMP) to NTFS.
And yes, pull other drives.
Personally, I use a separate hard drive for Windows 7 and just pull the others, boot from Windows DVD and install.
I assume your recent MacPro 5,1 is Mid 2010. If you want to use more than 4GB RAM you will want 64-bit, and if you have dual processor 8 or 12-cores, you'd need Windows 7 Pro.
As for where you are now, use Boot CAmp Assistant again to remove the partition on your Mac OS boot drive.
Backup Mac OS to another drive yet? I use SuperDuper or CCC.
You can format the intended drive in Disk Utility.
Use Partition tab, Options and change partition table from GUID to Master Boot Record and format the entire drive as FAT. Or use Boot CAmp Assistant to do so. You'll need to shutdown then, not restart, so you can pull your other drives.
http://www.apple.com/support/bootcamp/
http://support.apple.com/kb/HT3777

Company email access denied to iphone users due to security issues, help!

I am interested in purchasing an iphone but my company said they won't allow access to our company email with the iphone due to security issues. Any one else heard of that? Is there some way for me to forward my company email to the account I would set up under the itunes? It seems there are a lot of unhappy people out there with these phones, are there any happy users out there? It seems like such a cool device and I want one but don't want to get stuck with something I can't use or that I am going to have problems with.

Of course there are happy users.
These discussions are like a hospital for Mac products with nothing but problems reported here. If you based a decision on purchasing an Apple product, any product on these discussions, you would never purchase any. Coming to the conclusion here that there are no happy users and the iPhone is nothing but problems would be like visiting a local hospital in your area full of patients (all are) and coming to the conclusion that everyone in your community must be sick and/or dying.
What type of email account - POP, IMAP or Exchange through an Exchange Server?
Accessing an email account on an iPhone is no different than accessing the account with a computer. Funny that your company claims the iPhone has security issues and prevents access but certainly allows PCs running Windows to access company email accounts? Sorry but this is my biggest laugh of the day - not at you but at your company. Your company has loads of security issues and concerns with any version of Windows accessing their network than they would ever come close to with an iPhone accessing the incoming mail server to download messages.
If your company allows for email account forwarding, you can do so.

Security Issue HELP!!

I want to enable a logon for the internet. I live on a college campus and there are a lot of student looking for a free wireless network to hop on to suck up bandwidth, I want to prevent this. I would like to enable a login system so that when an unauthorized user try to gain access to the wireless through their network neighborhood they will have to give a username and password to gain access to the internet. If you could give me step by step introductions for doing this I would greatly appreciate it. Thanks for the help

In order to keep intruders off of your wireless system, you need to enable wireless security. To do this, pick an SSID and don't broadcast it. Encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
WEP - good
WPA - better
WPA2 - best
WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES.
The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and passwords that match those you entered in the router.
For additional security, on many routers, you can limit wireless access to just the MAC addresses of the wireless devices that you own.
So, in answer to the original question, to limit network access to just yourself, or yourself and a few friends, use MAC address filtering. However, be aware that MAC address filtering, by itself, can easily be cracked. (i.e. MAC addresses can be spoofed.) This is the reason that you need to implement full wireless security measures.
Message Edited by toomanydonuts on 11-18-200612:56 AM

Error: No matching processes belonging to you were found (1)

I'm building a app/script in xcode/Applescript studio and when I run the app the window comes up fine and displays the and cancel button works okay, but when I click "Okay" and execute the other portion of the script I get this error....
No matching processes belonging to you were found (1)
Any help would be appreciated.
Thanks
Dave
G5 tower, Dual G4 Xserve, many more... Mac OS X (10.4.5)

Okay, after changing the terminal command to include "sudo" I don't get the original error message anymore, but now I get "Password".......
My question is now how can I use "killall loginwindow" in a script that will work in any user account?
Dave

Search in Help Viewer always returns "No matching help topics were found".

Hi!
I'm running 10.3.9 on 14" iBook G4.
Recently re-installed OSX from CD after a hard disk replacement. Help viewer was fine on the original / old installation of the same version number of OSX.
The CD installs a version earlier than 10.3.9. Possibly 10.3.4? Cannot recall... is this important?
After HDD replacement, went through all the updates fairly rapidly, and arrived at version 10.3.9. Excellent! Except one thing (there may be more, but I've only discovered this so far!)... searches in Help Viewer return the same message irrespective of what I search for. I type the search string (e.g. "dvd" ) in the search bubble in the Viewer window. The message is as follows:
[bouyancy aid with question mark logo] No matching help topics were found
I have tried the usual things, without success, of:
- Removing the Famous Four cache and preference files/dirs.
- Repairing permissions. This repaired a few 'permissions'.
- Rebooting.
I think the icon of the bouyancy aid is a comic irony, but very well suited to my situation. Anyone out there with any suggestions on how to fix, please?
RSJ

Excellent pointers, thanks!
I haven't quite got it working, yet, but have got it to a point that is better than nothing.
Very peculiar -- discovered that, after trying many of the troubleshooting ideas without success, the solution was to hit the "back" icon on the viewer to get to the list of help topics satisfying my search criteria... cannot work out why. It would appear that, for some reason, the viewer is skipping the page with the help topics, and going directly to the "No topics found" page. Curious. I am wondering if one of the above activities (from your help pages) may have helped.
Anyway. Thanks very much for your help on this, and your *very* rapid responses.
Yours most impressed,
RSJ.

Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

Hello,
I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance. I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server. However when going thru ISA I receive the
following Error.
Power View Cannot connect to the server due to a security issue. The server may not have been able to match the host for Silverlight. This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
I've seen a couple references to this issue but not much. This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that. http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
Any Ideas? Thanks.
Ryan

Hi Ryan,
Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared without Doing anything!!
And now I can't use the " tap an click " from my tack-board and no nothing was spilled on my mac.
Please help

Check your login items in the Users & Groups preference pane. Remove any that you don't recognize.

Unable to use Adobe Reader. "Reader has finished searching the document. No matches were found."

Unable to use Adobe Reader. "Reader has finished searching the document. No matches were found."
I can use Adobe Reader on some documents but not all. I believe I have downloaded the correct software. I am using Firefox on a Mac with 10.8.4
Can anyone help?

weshuptrine wrote:
I can use Adobe Reader on some documents but not all.
Are these scanned documents? If scanned documents have not been OCR-ed, then they are just images without any searchable text.
Try if you can highlight any text in such documents.

My account was deleted for security issues. I made a new account, but I can't syncronise my apps with this new account. I bought a new Iphone and would like to transfer the apps ans music on this new one. Can somebody help me?

My account was deleted for security issues. I made a new account, but I can't syncronise my apps with this new account. I bought a new Iphone and would like to transfer the apps ans music on this new one. Can somebody help me?

Why would you make a new account? This will likely cause many problems. Just get you old account enabled.
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
Frequently Asked Questions About Apple ID
Everything you purchased with the old account will always be tied to that account. You will have to authorize the computer for that account and you will have to update the apps from that account.

Handle the "No matches were found." when doing a search in Adobe Acrobat PDF file.

I have written an Excel spread sheet and using visual basic coding in my macro can open an as needed PDF file, search for a paragraph number as copied from the spread sheet, capture the page in the PDF file it is found on and paste the "pagefound" back into my Excel spreadsheet where desired. In some cases, however, Adobe Acrobat Professional XI reports back that "No matches were found."
Is there any way to handle the display of this message using Visual Basic Coding so that I can set my pagefound field to 1 or -1 to tell me that the paragraph number does NOT exist in the file?
Thank you in advance.

Thank you for the quick reply. However, I am NOT trying suppress the message. I am tying to handle the message. In other words, I want the message to appear when required BUT I want to be able to try and CAPTURE the fact so that I can specify the page as being non-existent (such as entering a -1 for the page). Is there any way in Adobe or VBA coding in Excel to recognize that the message is displaying but not stopping it, just recognizing that it is appearing and handle it? Thanks in advance.

HT1725 Message says Apple ID is Disable how do I fix this. I changed my password 4 times already. It's not a security issue Please help me. Thank you

Please help me ever since the update every time I try to order an App I get a message saying "Apple ID I'd Disable" I've changed my password 4 times And changed my credit card also I don't think it's a security issue. Thank you

Hi Melivan!
I have an article here that can guide you through some steps for dealing with your disabled Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

No matching values were found ... security issue??? help

Similar Messages

Maybe you are looking for