No messages in Moni or RWB

Dear All,
We have done with PI 7.0 Post-Installation and Readiness check. Everything looks ok as per document.
i have created a scenario Idoc---> XI --->File....
i have done necessary setting at sxmb_adm.... too.
i am not able to see any message in sxmb_moni nor at RWB.
Atleast i should get error messages if anything is wrong ,which i am not getting.
Could anyone tell me does i need to do check any service ..
i see all adapters in rwb in grey color..any service to be activated or will be in grey in 7.0 version.
Any suggestions is highly appreciated and awarded.
Kind Regards,
Vijay

hi vijay,
u need to check whether IDOC reached XI or not.
so for this u need to go to SM58 tcode(any IDOCS with errors) and check any errors available.
if u get "nothing to be displayed" then go to we02
we02 gives u IDOC list delivered to receiver systems.
before this execute BD75 TCODE and in that five the commit filed as blank
now press "F8".
after this go to we02 in that select the date range ,if u find the IDOC in 03(reached port but not reciever) then it has not reached XI and u can find the problem in SM58.
if it is "12" then IDOC was successfully posted to XI system.
u r not able to see any IDOC in XI means it is not out of sender R/3.
if any issues plz revert
Thanks & Regards,
Rama Krishna
Edited by: rama krishna talluri on Mar 10, 2008 6:02 AM

Similar Messages

Duplicate message and Duplicate key error in Moni and RWB

Hi,
I am getting very frequent issues of Duplicate messages in production system moni and RWB.
Moni error: (IDOC to JMS) Errors are coming in call adapter step:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not insert message 005056aa-730e-1ed4-a6c9-a01ee2b86cb3(INBOUND) into duplicate check table. Reason: com.sap.sql.exception.OpenSQLException: Connection reset by peer: socket write error OpenSQLExceptionCategories: [RECOVERABLE]
RWB error: (File toIdoc) Errors are coming in sender channel.
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id a6d559cf-b00c-11e4-b786-00000daf354a(OUTBOUND) already exists in duplicate check table: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: Violation of PRIMARY KEY constraint 'PK__BC_MSG_D__99C1915D3DE9247A'. Cannot insert duplicate key in object 'SAPPGXDB.BC_MSG_DUP_CHECK'. The duplicate key value is (a6d559cf-b00c-11e4-b786-00000daf354a, OUTBOUND). OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION
Moni errors are manually reprocessed and RWB are automatic.
Can you please let me know if there is any solution available for these issues?
Thanks
Navneet.

I'm getting the same issue at my current client:-
Putting message into send queue failed, due to: com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id e1d4a31b-f0cc-11e4-c7fb-0000029706f7(OUTBOUND) already exists in duplicate check table: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: ORA-00001: unique constraint (SAPSR3DB.SYS_C00188646) violated OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION]
I've tried restarting the SOAP channel but this has not resolved the problem.
Just read on another thread that this may be a misleading error message (see last post on the link). It may be an idea to increase the trace level temporarily and look for any other issues that may be the cause.
So far I've not seen any post that describes the error on the SOAP channel - only seeing it for JDBC & File. However it seems to be a common problem across a number of sender channels.

No message in Moni

Hi all,
I'm trying a File to RFC to File scenario with BPM.
When i tested the scenario , the file got picked from the source and got deleted (as set in Communication Channel) but didnt show any message in Moni.
When checked in RWB, all the 3 communication channels are working fine.
Can someone suggest me as on this.
Regards
Archanaa

Hello
To have successfull messages logged in moni, you need to add few parameters in SXMB_ADM transaction as well. Check if following is done in your system:
Log into your PI server from SAP GUI
T_code : SXMB_ADM
double click: integration engine configuration
goto-> edit specific configuration
there you should have a row with runtime parameter of logging with value "1" (YES).
if not click "New entry"
in first column select "RUNTIME" in second select "Logging" and in defualt value set value to "YES" (1).
Hope this help...

No messages in MONI

I am facing a strange problem.
I am using 7.1
Sent a message from Soap to Proxy. The message processed succesfully ( I can see that on ERP)
the scenario is ASYNC. However i checked LOGGING_SYNC and other param in SXMB_
ADM, seems to be ok.
I do not see entries in MONI or RWB->Message Monitoring.
this s really strange...
any suggestions, guys?
Regards,
Venkat.

Hi,
how do you know it processed in ERP - can you see your msg in SXMB_MONI of ERP........
in XI in SXMB_ADM, check parameter LOGGING and TRACE for asynch scenarios............
moreover, in RWB in comm channel monitoring, see in sender SOAP comm channel, there is any msg or not..............
check if some job is scheduled for archiving or deleting msgs in XI............
Regards,
Rajeev Gupta

No messages in moni but in Idx5

Hi experts,
we have file to idoc scenario and once file has been updated idoc has to be generated in ECC. But now i cant see any of messages related to this interface in moni from last one year in production. When i try to see in Idx5 i can see messages but messages are not opening is there any configuration has to be maintained y messages are not getting opened but we can see in idx5 not able to see in moni? Please help on this asap..

Hi,
What i mean to say is there were no messages in moni at all of this interface but data is updating in R/3 means Idocs getting generated. I can see idocs in Idx5 but cannot see any messages in moni what might be the reason? And there was no archiving done?Checked in RWB also.
Edited by: aparna_karnam on Jan 10, 2012 1:42 PM
Edited by: aparna_karnam on Jan 10, 2012 1:43 PM

SWEEPER PROGRAM to restart the failure messages in moni

Hi Guys,
   Some times few messages stucked in MONI, with 503 or 401 error with error status as Manual Restart Possible..
   Then will manually restart...
   Is there any way of SWEEPER PROGRAM to restart the failure messages in moni ? how to approach that procedure...
Thanks,
Siva..

chk this (other errors section under Errors in Integration engine):
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically

Bonjour, pour valider mon ID je ne recois pas de message sur mon email , est ce que vous pourrier m'aider a valider mon ID SVP? merci

Bonjour, pour valider mon ID je ne recois pas de message sur mon email , est ce que vous pourrier m'aider a valider mon ID SVP? merci

JAI LE MEME PROBLEME PUTAIN

Je n'arrive ni a recevoir ni a envoyer des messages avec mon ipad, comment faire ?

Quand j'envoie un message sur mon ipad il n'apparait pas et je n'arrive pas non plus a envoyer un message a l'aide de mon ipad !! Aidez moi

Did you try this? iPhone: If you can't send or receive text messages

La fonction Message sur mon 3gs ne fonctionne que dans un sens recevoir envoyer le bouton est gelé?

la fonction Message sur mon 3gs ne fonctionne que dans un sens recevoir envoyer le bouton est gelé?

Try the suggestions in thie Apple document -> iPhone : vous ne pouvez ni envoyer ni recevoir de messages texte
You cna also force the messages application to quit, like this doc suggests -> iPhone et iPod touch : l’appareil est bloqué et ne répond pas

Je n'arrive pas à envoyer des messages avec mon Ipod Touch

Je n'arrive pas à envoyer des messages avec mon Ipod
Qui peut m'aider?!

Bonjour,
Si vous souhaitez envoyer un iMessage à partir de votre iPod touch, vous devez disposer d'une connexion internet autre sage vous ne parvenez pas à envoyer IMessages vous pouvez obtenir d'autres applecations Ex.: Kik Messager ou appels et SMS gratuits Viber.
J'espere Que this aide,
(Je parle anglais, Fait j'espere Que c'est correct)
<Edited By Host>

Pourquoi je m est pas le logo message sur mon ipod touch 4 gen

bonjour pourquoi je m est pas le logo message sur mon ipod touch 4 gen

I suspect you really have a 2G iPod. Those can only go to iOS 4.2.1. Are you sure you really do not have a 2G iPod? Those can only go to 4.2.1
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
In french:
Je suppose que vous avez vraiment un iPod 2G. Ceux qui ne peuvent aller à l'iOS 4.2.1. Etes-vous sûr n'avez vraiment pas besoin d'un iPod 2G? Ceux qui ne peuvent aller à 4.2.1
http://support.apple.com/kb/HT1353?viewlocale=fr_FR
iPod touch (3e génération)
L’iPod touch (3e génération) est doté d’un écran large Multi-Touch de 3,5 pouces (diagonale) et d’une mémoire flash de 32 ou 64 Go. Vous pouvez naviguer sur le Web avec Safari et regarder des vidéos YouTube grâce à sa connectivité Wi-Fi. Vous pouvez également rechercher des morceaux, écouter des extraits et les acheter dans l’iTunes Wi-Fi Music Store sur l’iPod touch.
Vous pouvez distinguer l’iPod touch (3e génération) de l’iPod touch (2e génération) en regardant au dos de l’appareil. Dans le texte situé sous la gravure, localisez le numéro de modèle. L’iPod touch (2e génération) est le modèle A1288 et l’iPod touch (3e génération) est le modèle A1318.

Errors in Message Display tool in Integration engine in Message Moni in RWB

Hi,
We are facing issues with the Message Monitoring in RWB.
When we are selecting the Integration Engine and selecting the message and then clinking on details.
We are able to see 4 tabs :
1. Message Data
2. Message Content
3. Inbound Adapter
4. Queue Monitor
Is it right to display these 4 tabs for Integration engine ?
Where will be this setting ? What tabs shud be there ?
We are using XI 7.0 SP10.
When we are selecting the Adapter Engine in Message Monitoring then we are getting Page cannot be displayed.
Please provide your precious inputs to resolve this issue.
Thanks
Ramesh

Hi Krishna,
We have restarted the system but its not working.
Adapter engine is working fine without any issues.
Only the issues are unable to view the Message monitoring as it shud be.
In Message Monitoing => Integartion Engine => Message Selected =>Click Details=> Message Display tool => Message Data Tab is fine.
Message Content Tab => if we open we are getting the following error with SAP screen.
**************************SSO logon not possible; browser logon ticket cannot be accepted
Choose "Logon" to continue A dialog box appears in which you can enter your user and password
No switch to HTTPS occurred, so it is not secure to send a password ****************************
Please suggest us.
Thanks,
Ramesh

Messages are HOLD in RWB

Hi,
I am facing a problem with Messages recieved by SOAP Adapter. I am using Aynchronous call and message split. The scenario is Proxy to SOAP receiver.
There 5 messages calling WebServices at the same time. there are no errors in MONI.
In RWB, I can see three messages are processed successfully and Two message are in HOLD status.
I am searched in forums and notes are talking about EOIO.This means the SOAP receiver put the messages in EOIO. Because we nowhere specify in receiver EO or EOIO.
Hope message split is not a problem. I am using PI 7.0 SP 13.
Thanks in advance for your suggestions,
Srinivasa

Hi,
Atleast my scenarios are not going to HOLD. The all new messages flowing now.
Still, i have to check how to restart my old hold messages, i am gettting exceptions for this.
One more problem is the messages are not in order, i am expecting one message to execute before that other one. the messages are generated from message split and hitting all my SOAP receiver adapter...
My interface deterimination already specified " maintain order at runtime"
It looks it is maintaining order in integration server, but adapter engine processining in its own way.
Is there anything i have to do here.
Thanks,
Srinivasa

Warning message in MONI for HTTP to File scenario

Hey guys
i have a HTTP to file scenario wherein i m getting file from an extrenal system in XML format outside our landscape,file is coming in properly and its being delivered as desired as well,but everytime i check my payload in moni ,an information message pops up saying that the file may be unsafe,do you want to display,save or cancel?
even though i get correct payload and the file is also coming from the designated IP and port,why do i keep getting this pop up?
thanx
ahmad

Hi Ahmad,
Put a break point at line 1,311 in progam RSXMB_DISPLAY_MSG_VERS_NEW_F02 in the form READ_AND_DISPLAY_DOCU2....
That is where you are getting this popup from...
Thanks,
Renjith

Incorrect Format message display in Message Displaying Tool of RWB

Hi,
I am not getting message payload in XML format in RWB>Message Monitoring>Message from component>Adapter Engine(database)>display.
By selecting the message>it will open the Message Display Tool(Details Display)> Goto Message Content tab>Message Part>Payload
Im not getting mesg in XML format .
Displaying as :
HEMA DEMA S1 18 1 10686 03052012 502043 6480 03052012 R2 HEMA DEMA S1 18 2 10686 03052012 502044 3750 03052012 R2
HEMA DEMA S1 18 3 10686 03052012 602695 360
How to get in XML format .

Hi Shabarish Vijayakumar ,
Thanks for quick replay.
I am not getting an proper XML payload for my ABAP Proxy to JDBC interface. I can see the message in normal format as text format.
As it should be display as JDBC receiver format structure.
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:MT_InvoiceInfo_Header xmlns:ns1="urn://abc/xi/abc">
<StatementName>
<SAPPrimaryInvoiceHeader action="INSERT">
<table>SAPPrimaryInvoiceHeader</table>
<access>
<BusinessUnit>abc</BusinessUnit>
<TerritoryCode />
<PurchaseCategoryCode>S1</PurchaseCategoryCode>
<SAPInvoiceNumber>0204000407</SAPInvoiceNumber>
<OrderNumber>20000426</OrderNumber>
<SAPCustomerCode>00020120</SAPCustomerCode>
<SAPDeliveryNumber>0820004404</SAPDeliveryNumber>
<SAPInvoiceDate>20120302</SAPInvoiceDate>
<NetValue>18.78</NetValue>
</access>
</SAPPrimaryInvoiceHeader>
</StatementName>
</ns1:MT_InvoiceInfo_Header>
(SAPPrimaryInvoiceDetailabcDABLS1901068910000100000000000005000841.000 145.00 123.99 0.00 SAPPrimaryInvoiceDetailabcDABLS1901068910000100000000000005000841.000 145.00 123.99 0.00)
Regards,
Ahmed.

No messages in Moni or RWB

Similar Messages

Maybe you are looking for