No more mixed-case user IDs?

Hello,
Since upgrading from app server 7 to web server 7, I have had reports of malfunctioning webapps that have seemed to work fine for me. Today I discovered the source of the problem - mixed-case user IDs.
Specifically, the username that the user supplies during basic authentication is of the form "FirstnameLastname", with capitalization as shown (e.g., "JohnSmith"). On as7, if a user's uid in our LDAP directory was JohnSmith and he attempted to log in as johnsmith, authentication would fail due to mismatched case.
However, since moving to ws7, case is no longer significant - JohnSmith = johnsmith = JoHnSmItH. Is there a way I can configure my ws7 instances to use the old, mixed-case approach? Or is this a known bug in ws7 that is being addressed?
Thanks,
Bill

Yes, I knew this (and even did an ldapsearch to verify it). However, I can say with certainty that on our old server (app server 7) login would fail if the case was not respected.
So either app server 7 was wrong to restrict logins based on uid case, or web server 7 is wrong not to restrict logins based on case. Since this is UNIX we're talking about here, and not Windoze, I would think case should be significant.
Thanks,
Bill

Similar Messages

How do you make InDesign CS5.5 save a mixed-case word to the user dictionary?

My spell checker will save most words to the user dictionary, but not all upper case or mixed case words. In my work these are often these since the are commonly used acronyms.
How do I make it save these to the user dictionary?

You haven't mentioned that you have an Adobe product that can create forms but if you have Acrobat, you would save it as a Reader extended PDF (you may or may not want t use Designer as mentioned above. That creates a certain type of form which it sounds like you don't need).
As far as the usage limit, if only a few people will be filling it in, they can do it an unlimited amount of times. The 500 limit only comes to play if you have sent the form to an unspecified amount of people (such as a form for customers that is available on a web site). Then you could only collect the data from that form 500 times.
But, let's talk a little more about what software you have. Acrobat? If so, what version (saving the extended file for Reader users is different between versions.)?

I need to send sm37 Spool Report Automatically to one or more user ids.

Hai Gurus,
I need to send sm37 Spool Report Automatically to one or more user ids.
Kindly guide me

Thanks.. .
is it possible to create Many distribution list for each & every Spool Report ?
I mean, Can i create separate distribution list for each Reports ?. EX: ME2N Report.
Edited by: Swetha SAP Girl on Jul 6, 2009 10:11 AM

I kept all my site-specific user IDs and passwords in the "notes" section under Organize Bookmarks. I can't find Organize Bookmarks any more, and the Show All Bookmarks doesn't have this feature! HELP!

Many sites require me to set up an account, and all have differing requirements for user names and passwords. In the old Firefox, in the Organize Bookmarks section, when you look at any bookmarked site, there was a place at the bottom (More...) where you could write notes to yourself. I used this space to write down my username and password for that site. Since I only visit some sites annually (to renew membership, etc or pay annual dues) I can't remember the passwords or user names. PLEASE tell me I haven't lost all that information! If I've lost all those passwords and user IDs I'm royally screwed! Thanks

Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file

BUG: Export DDL and Data fails for mixed case table/column names

Hi there,
I have found a bug in SQL Developer. See details below.
Description:
When "Export DDL and Data) function is used on a table/columns not named in UPPERCASE, sql generated by SQL Developer is invalid.
Steps to reproduce:
- open SQL Developer, connect to DB
- make a table named "lowerCase" (in double quotes, so it won't be automatically changed to capital letters)
- you may also add some columns, for example "lowerCol1", "UpCol2", ALLUPCOL3
- add some data rows to the table
- choose Tools -> Export DDL and Data
- check exporting of tables and data, on "filter" tabs choose your "lowerCase" table
- press "Apply"
Error:
Generated SQL contains invalid INSERTs: mixed-case table and columns are referenced without obligatory double quotes, which yields an error when generated script is executed (see below, relevant line is underlined)
-- DDL for Table lowerCase
CREATE TABLE "DBO_HT"."lowerCase"
(     "lowerCol1" VARCHAR2(100),
     "UpCol2" VARCHAR2(100),
     "ALLUPCOL3" VARCHAR2(100)
-- DATA FOR TABLE lowerCase
-- FILTER = none used
-- INSERTING into lowerCase
Insert into lowerCase (lowerCol1,UpCol2,ALLUPCOL3) values ('lc','uc','auc');
-- END DATA FOR TABLE lowerCase
Remarks
SQL Developer: version 1.2.1, build MAIN-32.13
Oracle DBs: 9.2 & Express
OS: Windows 2000 Professional
If you need any more details/testing, let me know. I'd really appreciate a quick patch for this issue...
Alternatively, do you know of any other simple way of copying a single database (it's called a schema in Oracle, right?) from one computer to another? Possibly something so simple like detaching->copying->reattaching mdf (data) files in SQL Server... I thought that this "Export DDL&Data" function will do, but as you can see I couldn't use it.
I just need a simple solution that works - one operation on source to stuff, get the resulting files to other computer and one operation to have it running there... I think that such scenario is very basic, yet I just can't achieve it and I am simply not allowed to spend more time on it (read: our test project fails, my company rejects my "lobbying" and stays with MSSQL :/ )
Thanks a lot & bye

Thanks for your reply.
ad. 1)
You're right. I just wanted to give some very short feedback on my experiences with SQL Developer, so I didn't think starting new threads would be necessary, but as I was writing it became much bigger than I initially planned - sorry about that. I will make proper threads as soon as possible. Having "Edit post" button on this forum would also be useful.
ad. 2)
Generally, you're right - in most cases it's true that "switching DBMS is a major commitment" and "you will produce terrible code" if you don't learn the new one.
However, I think that you miss one part of market here - the market that I think Express is also targeted on. I'd call it a "fire&forget databases" market; MySQL comes to mind as possibly most common solution here. It's the rather small systems, possibly web-accessed, whose data-throughput requirements are rather modest; the point is to store data at all, and not necesarily in fastest way, because given the amount of data that is used, even on low-end hardware it will work well enough. What's important here is its general ease of use - how easy is to set up such system, connect and access data, develop a software using it, how much maintenance is needed, how easy this maintenance is, how easy are the most common development tasks as creating a DB, moving a DB from test to production server etc. There, "how easy" directly translates to "how much time we need to set it up", which translates to "how much will the development will cost".
Considering the current technology, switching the DBMS in such systems is not necesarily a major commitment and believe me that you will not produce terrible code. In many cases it's as simple as changing a switch in your ORM toolkit: hibernate.dialect = Hibernate.Dialect.OracleDialect vs MySQLDialect vs MsSql2005Dialect
Therefore, in some part of market it's easy to switch DBMS, even on project-by-project basis. The reason to switch will appear when other DBMS makes life easier => development faster. From that point of view, I can understand my colleagues giving me an embarassing look and saying "come on, I won't read all these docs just to have db copied to test server". And it doesn't mean "they are not willing to learn anything new", it's just that they feel such basic task should have self-explaining solution that doesn't require mastering any special knowledge. And if they get such simple solutions somewhere else, it costs them nothing to change the hibernate dialect.
I think Oracle did the great job with introducing the Express to this "fire&forget" market. The installation is a snap, it just works out of the box, nothing serious to configure, opposite to what I remember from installing and working on Oracle 9 a few years ago. In some places it's still "you need to start SQL*Plus and enter this script", but it's definitely less than before. I also find the SQL Developer a great tool, it can do most of what we need to do with the DB, it's also much better and pleasant to use over Oracle 9 tools. Still, a few basic things still require too much hassle, and I'd say taking your schema to another machine is one of them. So I think that, if you do it well, the "schema copy wizard" you mentioned might be very helpful. If I was to give any general advice for Express line of DB/tools, I'd say "make things simple" - make it "a DB you can't see".
That's, IMHO, the way to attract more Express users.

Preventing duplicated user IDs

Hi All
We support many companies on 1 SAP environment (seperate company codes, same client) and every now and then audit will find that we have created two or more IDs for the same user. These are cases where the user applied twice. We have a naming convention of name, first character of surname and a sequential number indicating the company the user works for. For example John Smit at company 1 will be johns001 and Jane Doe at company 2 will be janed002. Now John Smit transfers to company 2 and applies for an ID. Now we have johns001 and johns002 in the system for the same user. An auditor's dream. The only unique way to identify users are by their passport or national ID numbers.
Does anybody know of a way to prevent the creation of duplicate user ids
Thanx
Neels

The naming convention is faulty itself. As it is company code specific so it is allowing to create duplicate user ids in different areas. Still changing the method might create lot of resistance. So better to follow a method while creating a user. Check in suim-user by address data. And give the 1st and last name. So if user do exists then you will get it before creating. Also make the email field mandatory to maintain. So if more than one person exists with nearly same name you can check on mail ID for further verification before user creation.
One more suggestion : You may like to maintain the last name end up with unique number like passport/emp ID etc. That will also give an edge.
Edited : Ideally a user should have unique user ID accorss the organization. If a user is getting transferred from one company code to another then his/her authorization should be changed accordingly not the user ID.
Regards,
Arpan Paik
Edited by: P Arpan on Jan 21, 2011 12:14 AM

Sharing music at home; sharing User IDs

My wife and I are faced with a problem of playing music from the iTunes library we have built over the past few years either from CDs or from the Apple iTunes Store.
I recently imported all our Cds into iTunes to save space and allow equal access. Our music now exists on ONE external hard drive. Most music tracks were imported from CDs, and therefore we don't have any restrictions who can play them. But then there is the music that either of us bought before and since married with our different User IDs. This means that music can only be accessed if originally bought by that person and on that authorized Mac.
So what can we do?
Is homesharing a good option? is it a viable option? Doesn't this require both Macs to be open at the same time to enjoy the music? What happens if I go to work with the music hard drive, and my wife needs to listen to tracks? I'd like to clone our music drive so she can access music in this situation, but it wouldn't allow her to listen to music I bought.
Placing all the music on one hard drive makes it easier to consolidate your library, but only if you can access all the music.
What have couples done in the past? Once married, do they create a 'couples' ID and buy music together for the home? Do you authorize your computers to that new account? And if so, what about the older music bought with older User IDs?
How do people work around the authorization problem as well?
Maybe the solution is to create non DRM versions of all our music and then we might be ok? Is that the only solution?
I'd appreciate any thoughts on this matter.
M
ps: EULA has destroyed the idea of sharing. Piracy is so much easier with digital files, but knowing that parents can't hand down their music or films etc to their kids is very sad.

You seem to be making quite a few incorrect assumptions in your post.
MarcusOne wrote:
But then there is the music that either of us bought before and since married with our different User IDs. This means that music can only be accessed if originally bought by that person and on that authorized Mac.
Why do you think it means that? (it doesn't)
So what can we do?
Keep the music on a hard drive at home.
Is homesharing a good option? is it a viable option? Doesn't this require both Macs to be open at the same time to enjoy the music?
Yes.
What happens if I go to work with the music hard drive, and my wife needs to listen to tracks?
"The hard drive"? As in a single hard drive? Don't you each have hard drives on own computers? She can listen to all the tracks in her library.
I'd like to clone our music drive so she can access music in this situation, but it wouldn't allow her to listen to music I bought.
Why do you think this? iTunes purchases have been DRM free for almost 5 years.
And even with DRM, just authorize the computer for each others account (which is automatically done when you enable Home Sharing).
What have couples done in the past? Once married, do they create a 'couples' ID and buy music together for the home?
Personally, I would not recommend it. Keep the accounts you have. No sense in tossing another into the mix.
And if so, what about the older music bought with older User IDs?
Just play it.
but knowing that parents can't hand down their music or films etc to their kids is very sad.
Why can't they?

Error while creating more than 100 users using Flatfile Recon

Hi,
I am trying to create users in OIM 9.1 using flat file recon. The recon works when I have less than 100 users in the flatfile. But if I add more than 100 users to the file, the recon does not create all users. Less than 50 users get created in OIM if the number of users in the flat file is more than 100. I get the below error in this scenario.
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: tcDefaultSignatureImpl/verifySignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connectSignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,600 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connect encounter some problems:
com.thortech.xl.security.tcLoginException:
     at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
     at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
     at com.thortech.xl.security.Authenticate.connectSignature(Unknown Source)
     at com.thortech.xl.security.Authenticate.connect(Unknown Source)
     at com.thortech.xl.security.Authenticate.connect(Unknown Source)
     at com.thortech.xl.security.jboss.UsernamePasswordLoginModule.login(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor130.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
     at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
Is there any maximum limit to the number of users created in Flatfile recon? I also get lot many errors following the above error. Please suggest
Edited by: User_OIM on Nov 26, 2012 9:37 PM

Hi Rajiv,
I am using GTC for the recon. Below is the complete log
com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-11-28 23:08:22,052 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session:
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: tcDefaultSignatureImpl/verifySignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connectSignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,600 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connect encounter some problems:
com.thortech.xl.security.tcLoginException:
     at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
     at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
     at com.thortech.xl.security.Authenticate.connectSignature(Unknown Source)
     at com.thortech.xl.security.Authenticate.connect(Unknown Source)
     at com.thortech.xl.security.Authenticate.connect(Unknown Source)
     at com.thortech.xl.security.jboss.UsernamePasswordLoginModule.login(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor130.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
     at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
     at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
     at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
     at org.jboss.security.plugins.JaasSecurityManager.defaultLogin(JaasSecurityManager.java:603)
     at org.jboss.security.plugins.JaasSecurityManager.authenticate(JaasSecurityManager.java:537)
     at org.jboss.security.plugins.JaasSecurityManager.isValid(JaasSecurityManager.java:344)
     at org.jboss.ejb.plugins.SecurityInterceptor.checkSecurityAssociation(SecurityInterceptor.java:211)
     at org.jboss.ejb.plugins.SecurityInterceptor.invokeHome(SecurityInterceptor.java:135)
     at org.jboss.ejb.plugins.LogInterceptor.invokeHome(LogInterceptor.java:132)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invokeHome(ProxyFactoryFinderInterceptor.java:107)
     at org.jboss.ejb.SessionContainer.internalInvokeHome(SessionContainer.java:637)
     at org.jboss.ejb.Container.invoke(Container.java:981)
     at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invokeHome(BaseLocalProxyFactory.java:359)
     at org.jboss.ejb.plugins.local.LocalHomeProxy.invoke(LocalHomeProxy.java:133)
     at $Proxy278.create(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor166.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.tcBaseUtilityClient.getLocalInterface(Unknown Source)
     at Thor.API.Operations.tcReconciliationOperationsClient.getDefaultDateFormat(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
     at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
     at org.jboss.ejb.Container.invoke(Container.java:960)
     at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
     at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
     at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
     at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
     at $Proxy368.getDefaultDateFormat(Unknown Source)
     at Thor.API.Operations.GCOperationsClient.getDefaultDateFormat(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor163.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy798.getDefaultDateFormat(Unknown Source)
     at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
     at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2012-11-28 23:08:27,602 ERROR [XELLERATE.APIS] Class/Method: tcBaseUtilityClient/getLocalInterface encounter some problems: {1}
java.lang.reflect.InvocationTargetException
     at sun.reflect.GeneratedMethodAccessor166.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.tcBaseUtilityClient.getLocalInterface(Unknown Source)
     at Thor.API.Operations.tcReconciliationOperationsClient.getDefaultDateFormat(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
     at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
     at org.jboss.ejb.Container.invoke(Container.java:960)
     at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
     at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
     at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
     at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
     at $Proxy368.getDefaultDateFormat(Unknown Source)
     at Thor.API.Operations.GCOperationsClient.getDefaultDateFormat(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor163.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy798.getDefaultDateFormat(Unknown Source)
     at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
     at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by: javax.ejb.AccessLocalException: SecurityException
     at org.jboss.ejb.plugins.LogInterceptor.handleException(LogInterceptor.java:384)
     at org.jboss.ejb.plugins.LogInterceptor.invokeHome(LogInterceptor.java:136)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invokeHome(ProxyFactoryFinderInterceptor.java:107)
     at org.jboss.ejb.SessionContainer.internalInvokeHome(SessionContainer.java:637)
     at org.jboss.ejb.Container.invoke(Container.java:981)
     at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invokeHome(BaseLocalProxyFactory.java:359)
     at org.jboss.ejb.plugins.local.LocalHomeProxy.invoke(LocalHomeProxy.java:133)
     at $Proxy278.create(Unknown Source)
     ... 55 more
Caused by: com.thortech.xl.security.tcLoginException:
     at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
     at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
     at com.thortech.xl.security.Authenticate.connectSignature(Unknown Source)
     at com.thortech.xl.security.Authenticate.connect(Unknown Source)
     at com.thortech.xl.security.Authenticate.connect(Unknown Source)
     at com.thortech.xl.security.jboss.UsernamePasswordLoginModule.login(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor130.invoke(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
     at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
     at org.jboss.security.plugins.JaasSecurityManager.defaultLogin(JaasSecurityManager.java:603)
     at org.jboss.security.plugins.JaasSecurityManager.authenticate(JaasSecurityManager.java:537)
     at org.jboss.security.plugins.JaasSecurityManager.isValid(JaasSecurityManager.java:344)
     at org.jboss.ejb.plugins.SecurityInterceptor.checkSecurityAssociation(SecurityInterceptor.java:211)
     at org.jboss.ejb.plugins.SecurityInterceptor.invokeHome(SecurityInterceptor.java:135)
     at org.jboss.ejb.plugins.LogInterceptor.invokeHome(LogInterceptor.java:132)
     ... 61 more
2012-11-28 23:08:27,605 ERROR [XELLERATE.GC.FRAMEWORKRECONCILIATION] Reconciliation Encountered error:
Thor.API.Exceptions.tcAPIException: Unable to retrieve default date format
     at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
     at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
     at org.jboss.ejb.Container.invoke(Container.java:960)
     at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
     ceptor.invoke(SecurityInterceptor.java:70)
     at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
     at $Proxy368.getDefaultDateFormat(Unknown Source)
     at Thor.API.Operations.GCOperationsClient.getDefaultDateFormat(Unknown Source)
     Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by [Nested Exception]:
Thor.API.Exceptions.tcAPIException
     at Thor.API.Base.tcBaseUtilityClient.getLocalInterface(Unknown Source)
     at Thor.API.Operations.tcReconciliationOperationsClient.getDefaultDateFormat(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
     at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
     at org.jboss.ejb.Container.invoke(Container.java:960)
     at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
2012-11-28 23:08:27,607 WARN [XELLERATE.GC.FRAMEWORKRECONCILIATION] Though Reconciliation Scheduled task has encountered an error, Reconciliation Transport providers have been "ended" smoothly. Any provider operation that occurs during that "end" or "clean-up" phase would have been executed e.g. Data archival. In case you want that data to be a part of next Reconciliation execution, restore it from Staging. Provider logs must be containing details about storage entities that would have been archived
2012-11-28 23:08:27,704 ERROR [XELLERATE.SERVER] Class/Method: QuartzWrapper/execute encounter some problems: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
org.quartz.JobExecutionException: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
[See nested exception: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
* Nested Exception (Underlying Cause) ---------------
java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.updateStatusToError(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.access$600(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2012-11-28 23:08:27,704 INFO [org.quartz.core.JobRunShell] Job DEFAULT.FLAT RECON_GTC threw a JobExecutionException:
org.quartz.JobExecutionException: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
[See nested exception: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
* Nested Exception (Underlying Cause) ---------------
java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.updateStatusToError(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.access$600(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)

Automatic Creation of User IDs

Does anyone know of a standard SAP report/program that will generate User IDs for personnel records? I have a requirement to define a procedure that will review personel numbers to determine whether or not that personel number has an ID assigned to it. If it does not, then the report/program will generate an ID according to a particular naming convention. And of course, this report/program would assign the correct roles according to the position defined.
I know that there are reports/programs that will update a user's access as he/she moves from position to position. I am hoping for one that will assist in the ID creation process.
Maybe this is wishfull thinking on my part....
I await your reponses!

Sounds like you want to implement your own ESS (Employee Self-Service) application ...
Before doing so, it might be advisable to check on what is already available.
The Business Partner concept is a more general concept (only only restricted to "employees" and "applicants" but also applicable on "customers", "resellers", etc.) which also allows to assign logon data to "business entities".
So, it would be helpful to know what you actually intend to achieve.
Cheers, Wolfgang

NGS Sponsors authentication does not work in case user has non-English character in his password

Hi,
we are using the NAC Guest Server v 2.0.1 and have Sponsors authentication done through Radius servers. Radius servers are Microsoft IAS using AD.
Sponsors user authentication works okay in case user's password includes English characters, but does not work in case an user uses national characters like for example Umlauts in German.
On Radius server I can see these error messages:
User XXXX was denied access.
Reason = Authentication was not successful because an unknown user name or incorrect password was used.
As soon as an user changes his password and uses English characters only, it resolves.
I guess this might be that NGS uses different coding while sending a password to Radius server, but not sure.
Appreciate if anyone knows a root cause and what could be a workaround. Unfortunately our AD policy allows users to use national characters and we can hardly change it. So a change on NGS or Radius side would be more viable.
Many thanks for your help.

A case has been opened at Cisco and it is now quite clear that it is a problem with coding.
According to Cisco development team NGS uses UTF-8 coding to send the password, of course encrypted, to the Radius server. This cannot be changed within NGS. We use Radius Microsoft IAS Version 5.2.3790.3959 running on VMWare Windows 2003 SP2. More tests are scheduled to be performed.

Adobe Form used by more than one user simultaneously

Friends,
I am working on an online interactive Adobe form using Web Dynpro ABAP.
once the user enters the data and clicks the submit button, the data is sent to ztables.
the scenario is that more than one user can possibly use the same form simultaneously. in that case, how can i maintain synchronization ie how to avoid multiple users from using the form at the same time, when the form is already being filled by one user already.
I am guessing i have to do something with ADS for this.
Any thoughts or ideas would be greatly appreciated.
Thanks and Regards.

Hi Bertrand,
The purpose of allowing only one user is to ensure data consistency as you have guessed.
Is there a program name or transaction code where i can look up the lock entries and see if i can apply them to my web dynpro application or the adobe form.
I would greatly appreciate your help.
Thanks and Regards.

How to preserve mixed case in Data Dictionary

Hi,
I am very new to Oracle, please excuse in advance for silly questions.
Using Oracle 9i R2, SQL Developer 1.51.5440.
I don't know if it's Oracle DB or The SQL Developer tool, but the names of the object I create are all transformed in uppercase. Table name, column names, procedure names all are displayed in uppercase. And yet I make sure when I created them to use carefully mixed case to improve readability. Example: ProductID, MyTable, etc.
I've gone over the options of SQL Developer, but I didn't see any option to turn off the automatic uppercase. Some objects still remains in mixed case, for example the content of a procedure still looks like when I typed it.
Is there a way to get the object names to be displayed exactly as I created them?
Thanks in advance.

Ok, now I see, make senses that everybody keeps using uppercase. I have tried this:
CREATE TABLE "MyTable" ("Col1" number not null, "Col2" varchar2(20) not null)
And indeed, even SELECT * FROM MyTable would not work, I have to reference the table by SELECT * FROM "MyTable"
FYI, in SQL Server, object names are case-insensitive. The name saved in the data dictionary is exactly how you type them. In the queries, constraints, indexes, etc., you can reference to the object name by any case. I find this way more convenient.
One more question, in the current schema I am working on, where all object names are uppercase. How come I can still make a query with any case?
For example if I type in SQL Developer: SELECT ProdUCTID, PrOduCTNaMe FROM T_proDuCT ;
The query executes OK although I'd expect Oracle would complain about table not found. So are the following rules correct?
1. If the object name was saved with double quote, Oracle will preserve the case and the object should always be referenced WITH double quote and the exact case.
2. If the object name was save without double quote, Oracle will uppercase the name and the object can be reference by any case.

Can we set "IN PROCESS" Status to more than one User

Hi,
As per my client current scenario every work item will be sent to 3 useru2019s (One is the supervisor of the other two users). If any one of the user executes the work item it will automatically call a Ztransaction and displays the screen. When any one of the user executes the workitem, then the workitems will dissappears from rest of the users inboxes; Setting "IN PROCESS" status for the person who executed the workitem. The workitem will be in "IN PROCESS" Status untill the User Press "SAVE" button in the transaction.
If the person whose executed the workitem (IN PROCESS) status, has gone on unplanned leave; then the supervisor wants to forward the workitem of the current user to other user. How can he forward?
Is there any option to set "In Process" status to more than one User? [Supervisor and Person who executed the workitem]
Please provide me any advice to the above requirement.
Thanks in advance,
Ajay Kumar

Can you ask your workflow administrator to forward the workitem to the user you want to be sent it to.
I tried a small case wherein I had forwarded a workitem to myself and another user.
As I executed it , it went into status IN process and at the same time it got removed from other users inbox .
Now I went to T Code SWI1 and forwarded iut to another user say USABC.
As a result the workitem again went into status "Ready" and into the inbox of the user ABC.
So , you can try this in your case with the help of your workflow administrator.
Another way is to create the other user as a substitue of the user who is currently executing the workitem.

Issue with mix case

Hi!
Is there any way to prevent the data to be converted to upper-case without changing it's domain?
I'm trying to insert mix case in a CHAR40 domain, but the text allways returns as upper-case.
Regards,
Andre

AMadeira wrote:
> It is possible to do that using code only?
Please give more details: what you want to do programatically. ?
If you check the domain of CHAR40 thru SE11 you can find :lowercase" check box not checked. so it convert to upper case
a®

Saved logons (user ids & password) are not filling out logons

I have user ids and passwords saved but when I navigate to the site for which the user id and password are saved, the logon fields are no longer being filled.
These are valid logons which worked under older versions of Firefox.
I've looked for any settings I may have missed and have found nothing different between 4.0 and 3.6

Ok, this seems to be a long and convoluted path to do absolutely nothing.
You submit the form.
You run a servlet that gets the parameters correctly (good), creates a SimpleBean (good) and then sets this into request attribute space under the names "user" and "pass" - (why?)
You then forward to the jsp: submit.jsp.
Submit.jsp creates a new SimpleBean, and attempts to populate it with <jsp:setProperty>. You then call the issueData method on it.
Your complaint: Rows are being created in the database which have empty string values instead of the parameters you have passed.
So, why are the values blank? Where do you think these values should be coming from?
Looking at SimpleBean we find one mistake - you have mis-named your get/set methods.
To properly follow java beans standards, you should use camel-case for your methods.
Rather than getuserName() the method should be getUserName(). getpassword() should be getPassword() etc etc.
The method getUserName() defines a property "userName" for the bean.
Once that is fixed, lets go to submit.jsp. The <jsp:setProperty> statement will try and set all properties of the bean from the request parameters.
There are no request parameters "userName" or "password" so those values don't get set in the bean, therefore it uses their default value of empty string - "".
There ARE request parameters called "user" and "pass" but because they aren't properties of the bean, they get ignored.
As a result, the values are empty string, and that is exactly what gets inserted into the database.
Ways to fix this
1 - rename your parameters on your form to be "userName" and "password" to match the bean. That way the <jsp:setProperty> tag will populate them properly.
or
2 - Call issueData() method from your servlet after you have created the SimpleBean. Better in my opinion as you then don't have any scriptlet code on a JSP page.
Cheers,
evnafets

No more mixed-case user IDs?

Similar Messages

Maybe you are looking for