No network when instantiating a template created with OVAB in Oracle VM 2.2

Hi,
I've created an OVM template with OVAB (Oracle Virtual Assembly Builder) and the default OVAB image. When creating a new VM (vm2) with it, the VM starts but the VM cannot access the world outside the bridge (xenbr0). I can however ping another VM (vm1) in the same bridge, I can also ping the main OVM server interface (dom0 xenbr0), but I can't ping a machine on my real network.
What is strange is that vm1 was installed with PXE and is well accessing outside world. In fact the DHCP server on my real network is working well and is well configured for vm1 and vm2 but only vm1 obtains its IP address. For vm2 no answer from the DHCP server, so I have to manually set the IP address of eth0 of vm2 before performing ping tests. This is another fact that goes in the same direction as "outside network unreachable from vm2 diagnostic".
Now I understand (correct me if I am wrong) that the bridge is configured automatically by OVM, so why is it ok for vm1 and not for vm2 whereas they are in the same bridge xenbr0 ? Also a strange thing (may be ?) is that the bridges configuration shows a tap interface configured for vm1 but not for vm2:
'brctl show' output:
bridge name     bridge id          STP enabled     interfaces
xenbr0          8000.001e6837f20e     no          vif36.0
                              vif35.0
                                   tap35.0
                                   eth0
xenbr1          8000.001e6837f20f     no          eth1
xenbr2          8000.001e6837f210     no          eth2
xenbr3          8000.001e6837f211     no          eth3
vm1 is 35 and has vif35.0 and tap35.0 but vm2 is 36 and has only vif36.0 : could it be the problem ?
Also vm1 is using ioemu networking driver whereas vm2 is using netfront (which I can't change as I suppose OVAB was using a PV image).
Thanks for any help/idea.
Edited by: user13344422 on 14 avr. 2011 01:32

Hi,
I think more this is a networking issue inside the VM.
It may well be the default Gateway is not set correctly.
Compare the output (of the working VM and the not working VM) of:
route
cat /etc/resolv.conf
cat /etc/sysconfig/network
And the network adapters:
cat /etc/sysconfig/network-scripts/ifcfg-eth1
Regards
Sebastian

Similar Messages

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions. Complain to Apple, you may have better chance than me and they may finally listen to their users....

Rtf Templates created with BI Publisher 11.1.1.3.0 not working in APEX

I created templates using BI Publisher v10 Desktop that I used to create Report Layouts in APEX and everything worked just fine. However, I've upgraded to BIP 11.1.1.3.0 Desktop and the rtf templates don't work. I suspect that the problem is with the graphs.
Is there something in my APEX environment that needs to be upgraded or modified to be compatible with the BIP v11 templates? Are templates created with BIP v11 compatible with APEX Reporting?

I'm having a similar issue with 11.1.1.3.0
My RTF templated uploaded to APEX correctly, and seems to load and generate ok. The OUTSIDE formatting on the report (title, etc) all seem to show fine, but the actual repeating data block doesn't show any of the data or columns or boxes..... Just the column headers.
VERY FRUSTRATING......

When placing a PDF created with Distiller, I only get Crop and Media as import options -- I need it to crop to the Trim! PLEASE HELP!

I'm having a MAJOR problem placing PDF files in InDesign CS4...
When I try to place a PDF that has been created in Distiller, the ONLY import options I can choose are CROP and MEDIA. I need it to crop to the TRIM, but that option is grayed out. The PDFs I'm trying to place were created in-house, and converted from Post Script files to PDFs using Distiller. We use PDF/X-1a equivalent settings when creating our PDFs.
If I export the file as a PDF and then try to place it into a CS4 file, I am able to select Trim as an option.
ALSO, if I open the Distiller PDF in Acrobat and then save it (without changing anything), I am able to select Trim as an option. A workaround I have found is to open all of the PDF files in Acrobat, save them to my desktop, and then save over the ones I need to place. Here's the problem with that: I work for a publishing company, and need to place hundreds of ads for each issue of our publications, and it adds a lot of time if I have to go and re-save everything just to be able to place all the ads.
Does anyone know how to fix this problem? I need to get this figured out so we can use CS4 for all of our publications again. -- We've gone back to using CS3 until I can get this figured out...
- Valerie

Steve,
Thanks for the reply, but my PDFs all have trim boxes on them. If I try to place the same PDF in InDesign CS3, it gives me Trim as an option. Also, if I open the PDF and save a copy to my desktop, I am able to select Trim as an option when placing the PDF, and I didn't change anything about it.
I've been trying to see if it's something with the Print Preset settings I'm using, but I can't find anything that seems like it would affect how InDesign would read the Trim area of the PDF.
I've attached 2 PDF files. One that was created with Distiller, and one that was exported from InDesign CS4. The Distiller one doesn't show Trim as an option in CS4, but the exported one does.... but they started out as the same ad. Ugh! Help me please!
- Valerie

FM11 crashes when opening DITA files created with FM7.2

Hi all,
I am finding out new truths every day now about FM11 and DITA 1.2..
The latest problem: FM11 crashes (on all our computers) when trying to open existing DITA files. These were created with FM7.2 using the DITA application pack. FM11 is newly installed and uses its standard configuration out of the box. Win7 64bit.
No dialog opens, FM11 just hangs for a while, then dies.
I do not think that I will put much effort in resolving this and just maintain existing projects with older FM versions. So just for interest, is this a known bug?
Robert

This isn't a new restriction, but it does have to do with the structure app implementation in FM. In the FM app pack (and all DITA 1.0 or DITA 1.1 implementations that I'm aware of), the structure app was based on the ditabase model, which allows all topics in any order in the same file. But with FM's DITA 1.2 apps, they created separate apps for each topic type, which restricts the topics in that file to that type. If you open the file with the DITA 1.2 ditabase app (is there one?), you shouldn't have any topic nesting restrictions.
Regardless .. it shouldn't crash FM.
...scott

Template File created in DreamWeaver Looks ok. But when a new file created with this template shows disordered

I created a template file in DreamWeaver cs5. It is OK. and it looks like this, with Pink box showing the editable region. http://smsoftsolutions.com/downloads/test.jpg
Now the problem is, when I create a NEW html file from this Template, in the DESIGN view, the template contents are shown in a flowing mode. ie. Absolutely positioned DIVs are showing in a disorderly way, as shown in this screenshot. http://smsoftsolutions.com/downloads/test2.jpg
When I preview it in browser, it is showing as I expect. But only in the design mode, it is showing in a relatively positioned way.
Can anyone tell me what I should do in the dreamweaver settings, to show the layout in a WYSIWYG way?

Hi,
Thank you for your reply.
If I post the pages alone, the link to the images will be broken.
The css files also will be broken.
The css file should be in the folder css, images should be in the folder home_images, and template file should be in the folder templates.
The link to three files are:
1. HTML FILE
http://smsoftsolutions.com/downloads/t.html
2. TEMPLATE FILE
http://smsoftsolutions.com/downloads/vetiver_master.dwt
3. CSS FILE
http://smsoftsolutions.com/downloads/css/vetiver_css.css
Sincerely,
Tomy Sebastian
>

Problems Viewing .pdf Template Created with Adobe

I created a .pdf template using Adobe LiveCycle Designer. After I upload this template, I can not view the report. Can I only create templates using the BI Publisher plugin for MS Word?

That is hardly a solution, the whole purpose of upgrading to Adobe Reader X is to avoid potential threats. There is obviously a problem with Adobe Reader X and veiwing certain documents that needs to be addressed and the way to address it should not reside with "Use Adobe 9 and Adobe 10 and pick whatever version works for your document"

Error when Importing m4v files created with Handbreak

I am copying my VHS home movies to DVD using a Sony DVD recorder. When I put the disk into my Macbook Pro it looks like a folder rather than a disk image. The folder (named SONYDVD_RECORDERVOLUME) is empty when I click on it. It plays fine on my DVD Player. Handbrake is able to load the DVD files and I can copy them using iTune high quality recording set. The resulting file funs fine with QT, loads on my iPod and plays fine, will copy into iMovie but when I try to put into Final Cut Express I get an error message : File Error: Unknown File. Is there something that I am missing??? Ideas would be appreciated,

Eric:
Thank you. MPEG Slipstream worked great.
Do you know if there is software available that would let me see what is in/copy the files in the Sony folder so that I might be able to copy the disk directly instead of having to copy the files off of it with Handbrake? Would having the QT add-on for the MPEG-2 playback component be helpful?
Thanks again
Tim

Modem router link down in a small network when I connect any mac with OSX

With OS9 I have no problems at all the other machines are PCs, I try whith 2 diferent laptops, and 2 macmini and the internet connection throught a modem router link down inmediatly... and the modem try to connect many times automaticly, and connect for few minutes... after that being link down again... any ideas what the problem is? I think a protocol interference may cause this, but I don't know what really... thanks

Start by changing the wireless names to SMB compatible names.. ie short, no spaces and pure alphanumeric. Make sure the HP is in range of the router.
You can use the WPS setup via the utility main menu. There is no WPS button as such but apple has had to provide some way to handle this directly.
http://store.apple.com/us_smb_78313/question/answers/readonly/does-the-airport-e xtreme-support-wifi-protected-setup/Q7JJ79KC7F2DTCYJP

Issue Alert created with workflow (Prasanna Adavi posts) - Error project site creation in EPT

Hi,
in PROJECT SERVER 2013, after following the Prasanna Adavi posts on "Setting up an alert for Project Site Issue (and Risk) Alerts using SharePoint
Designer Workflow" i've saved the site template.
If i create a site from the template the site creates correctly and workflow Issue Alert works fine. BUT if i add the new template in an EPT, when i create a new Project i receive error in ProjectSiteUpdate (Failedbutnot blocking) and the site failed
to be created.
This is the error:
General•CreateWssSiteContent: Creating project site failed! Project Uid=6fc7f531-8ad7-e311-9415-005056ab29ed, site URL=https://project.companygroup.org/PWA/20140509-TestIssueAlert10, site name=20140509-TestIssueAlert10. System.Runtime.InteropServices.COMException
(0x8107058A): <nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.SharePoint.SPException: We_re sorry, we weren_t able to complete the operation, please try again in a few minutes. If you see this message repeatedly,
contact your administrator. ---> System.Data.SqlClient.SqlException:
The EXECUTE permission was denied on the object _proc_AM_PutAppPrincipal_, database _App_Management_db8e4bc2-bb34-4cc7-be57-a3b620a3abc5_, schema _dbo_. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1
wrapClos at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId) at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String&
bstrWebTemplate, Int32& plWebTemplateId)Microsoft.SharePoint.SPException: Microsoft.SharePoint.SPException: We_re sorry, we weren_t able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
---> System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object _proc_AM_PutAppPrincipal_, database _App_Management_db8e4bc2-bb34-4cc7-be57-a3b620a3abc5_, schema _dbo_. at System.Data.SqlClient.SqlConnection.OnError(SqlException
exception, Boolean breakConnection, Action`1 wrapClos ---> System.Runtime.InteropServices.COMException: <nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.SharePoint.SPException: We_re sorry, we weren_t able to complete
the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator. ---> System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object _proc_AM_PutAppPrincipal_, database _App_Management_db8e4bc2-bb34-4cc7-be57-a3b620a3abc5_,
schema _dbo_. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapClos at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb,
Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId) at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb,
Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId) --- End of inner exception stack trace --- at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String
bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId) at Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate
webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) at Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate
webTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) at Microsoft.SharePoint.SPSite.CreateWeb(String strUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate,
Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid webId, Guid rootFolderId, Boolean createSystemCatalogs, Guid appInstanceId, String appWebDomainId) at Microsoft.SharePoint.SPSite.SPWebCollectionProvider.CreateWeb(String strWebUrl, String strTitle,
String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId) at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String
strWebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere, Guid appInstanceId) at Microsoft.Office.Project.Server.BusinessLayer.AdminProjectSiteAllocator.CreateSPWeb(ProjectSiteConfigurationInfo configInfo, SPSite topSite):?WSSCreateSiteFailure
(16400). Details: id='16400' name='WSSCreateSiteFailure' uid='cb09143a-8ad7-e311-9415-005056ab29ed' projectUID='6fc7f531-8ad7-e311-9415-005056ab29ed' workspaceUrl='https://project.companygroup.org/PWA/20140509-TestIssueAlert10/20140509-TestIssueAlert10' projectWorkspaceName='20140509-TestIssueAlert10'.
•Queue:?GeneralQueueJobFailed (26000) - CreateWssSite.CreateWssSiteMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='cc09143a-8ad7-e311-9415-005056ab29ed' JobUID='bcc7f531-8ad7-e311-9415-005056ab29ed' ComputerName='4c7454d7-d6c8-42e7-a071-01921e89dbd5'
GroupType='CreateWssSite' MessageType='CreateWssSiteMessage' MessageId='1' Stage='' CorrelationUID='9b3a8f9c-a1f4-e0a1-9dbd-59e8ea307386'. For more details, check the ULS logs on machine 4c7454d7-d6c8-42e7-a071-01921e89dbd5 for entries with JobUID bcc7f531-8ad7-e311-9415-005056ab29ed.
Can someone help me?
Regards
Daniele
Daniele

Thanks Adavi,
i've created the workflow in a placeholder template for test purpose and it works. I confirm you dependence from:
- App Configuration Management Service (hidden in TechNet but you receive error if is not active);
- User Profile Service and Sync Service active;
- Profile Syncronization started;
The error occurs when i create a new project with the site template created with the issue list workflow inside.
I'll wait for your test and tomorrow i'll test it in an other environment to exclude installation dependence.
Daniele

Credit memo to be created with reference to return delivery

Dear Gurus,
We have a requirement for mapping return process
Credit memo to be created with reference to return delivery (instead of with reference to return order)
Following issue faced in mapping the same:
Billing document No. 1234 dated 25.03.2010 where there is 4% VAT.
when we are creating return order with reference to billing document 1234
4% VAT is calculated since the Service Rendered date is 25.03.2010 (Copied form Billing document)
return delivery is created today 08.04.2010. (VAT revised to 5%)
when credit memo is created with reference to delivery document
VAT is calculated 5% which is applicable from 01.04.2010
since the service rendered date is appearing in billing document
08.04.2010 (the date of Post Goods Receipt).
The VAT should be actually 4% in Credit Memo.
regards,
Rajesh T

In the copy controls from delivery to Invoice, at the item level try to use pricing type C and Pricing source Blank ( Blank is order).
If it doesnt work , then you might have to go for a requirement routine for this Tax , based on the document category that is being processed, read the tax from the originating order.Assign the routine to tax condition in the pricing procedure.
Regards
Sai

Copy values when new action is created

Hi,
In ERP with SAPgui there was nice feature : when one document was created with reference most data were copied (and in customizing it was possible to set what exactly should be copied).
In CRM Webclient UI I have following problem:
1. If I check in WebClient customer contact and I go to assignment block "Planned Activities" and click on NEW button
2 I create a new appointment.
3. Some data (like Contact) are filled but some are missing (like Account for which Contact was created).
I would like to have "Account" information automatically taken from Contact (if contact has reference to account).
I don't think its something to be customized (SPRO), but rather to be developed for UI component.
When I searched for a solution I found this topic:
[Data transfer from one component to another component|Data transfer from one component to another component]
Could anybody confirm the correct approach to have some values populated when something is created with reference (like described in this example).
thank you for any suggestions
regards
Rafal

Hello Rafal,
First of all you should know that to determine the "ATTENDEES", the system runs through the following steps:
1) Read all partners of the business transaction.
2) Keep those BP with a partner function assigned to partner function category 0005, 0007, 0008, 0010 or 0032. You can see it in method ATTENDEES of class CL_CRM_PARTNER_RUN_BTIL.
3) Also you should know that assignment of partner function to partner function category is done in the following IMG:
SPRO >> CRM >> Basic functions >> Partner processing >> Define partner function.
Now according to me, you certainly have a problem with your partner determination procedure: there must be a partner function (linked to one of the category mentioned above) for which you forgot to set a value in "maximum number of occurrences".
Moreover, I think there is a limitation in CRM versions below 7.0: meaning no popup window is displayed to ask the user to choose which partner they want to select in case more than the max number value are found. For example: imagine you set the maximum number of allowed contact person in one document to 5, but 10 are found, the system will automatically select the first 5th for you...
Hope that clarifies the situation a little bit.
Kind regards,
Nicolas Busson.

Workflow created with Authoring tool produces a workflow that doesn't work

Hi,
I'm getting fed-up with the Authoring Tool. It has such inconsistently bad results.
Anyway, here's my current problem:
1. Create a new MP
2. Create a new Workflow that triggers when an incident is created with no additional criteria
3. Add a command script to the workflow that runs an exe based on the workflow server
4. Add two parameters, one of /commit the other of the Id of the incident
5. Import the MP, copy the resultant assembly DLL to the workflow server
6. Trigger the workflow, it fails with:
Microsoft.EnterpriseManagement.Common.InconsistentDataException: The requested objects had an unknown management pack. ---> Microsoft.EnterpriseManagement.Common.InconsistentDataException: The call produced inconsistent results. The data on the client
does not match the data returned from the server. The most likely cause is that client-side cache is out of sync with server data. ---> Microsoft.EnterpriseManagement.Common.ObjectNotFoundException: An object of class ManagementPack with ID ab2e712a-8963-028c-50bb-8d2fbecf380a
was not found.
   at Microsoft.EnterpriseManagement.Configuration.TypeSpaceCacheBaseWithManagementPacks.GetManagementPack(Guid id)
   at Microsoft.EnterpriseManagement.ManagementPackManagement.GetManagementPack(Guid id)
   at Microsoft.EnterpriseManagement.Configuration.CreatableManagementPackElement`1.GetManagementPack(Guid managementPackId)
   --- End of inner exception stack trace ---
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Configuration.CreatableManagementPackElement`1.GetManagementPack(Guid managementPackId)
   at Microsoft.EnterpriseManagement.Configuration.ManagementPackTask.Constructor.CreateSingle(Result row)
   at Microsoft.EnterpriseManagement.Configuration.ManagementPackElementConstructor.CreateMultiple[T,H](IList`1 dataAccessResult, EnterpriseManagementGroup managementGroup, ManagementPack managementPack)
   at Microsoft.EnterpriseManagement.TaskConfigurationManagement.GetTasksInternal(ManagementPackTaskCriteria criteria, IList`1 targetTypeIds, BaseClassTraversalDepth baseClassTraversalDepth, Nullable`1 managedEntityId)
   at Microsoft.EnterpriseManagement.TaskConfigurationManagement.GetTasksInternal(ManagementPackTaskCriteria criteria, IList`1 targetTypeIds, BaseClassTraversalDepth baseClassTraversalDepth)
   at Microsoft.EnterpriseManagement.TaskConfigurationManagement.GetTasksInternal(ManagementPackTaskCriteria criteria)
   at Microsoft.EnterpriseManagement.TaskConfigurationManagement.GetTasks(ManagementPackTaskCriteria criteria)
   at Microsoft.ServiceManager.WorkflowAuthoring.Common.ManagementGroupHelper.GetTaskGuid(String taskName, String mgmtGroupName)
   at Microsoft.ServiceManager.WorkflowAuthoring.ActivityLibrary.CommandScript.InitializeRunTaskActivity()
   at Microsoft.ServiceManager.WorkflowAuthoring.ActivityLibrary.CommandScript.Execute(ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.CompositeActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
   at System.Workflow.Runtime.Scheduler.Run()
Does anyone know why this is or how to fix it?
I've tried twice now with the same results.
Cheers,
Rob

I gave up with this approach and created a custom activity for this workflow which is passed the same parameters and performs the same actions but works perfectly.
Did you ever find a reason for this error?

How to access Templates created in PAGES iwork06?

How to access Templates created in PAGES iwork 06?
I also want to eliminate default template folders and recreate my own as in 06 version of PAGES.
Templates file is located where in '08?
Don't need all the pre-made templates!

The pre-made templates are contained in the Pages application package. Any templates you create yourself are stored in HD > Users > [your account] > Library > Application Support > iWork > Pages > Templates > My Templates. There is no separation of user created templates by Pages version. Those I created with Pages 1 & 2 are in the same place where my Pages 3 templates are & are all available to me in Pages 3. The only problem with this would be if you decide to use a previous version of Pages, you won't be able to access templates created with a newer version.

Directory security created with AL11

Hello,
When a directory is created with AL11 what is being done with the security of this directory ?
Can you set the security for this newly created directory through the SAP gui or do you have to use the tools available within i5/OS to adjust the security setting is of this directory to your needs ?
Kind regards, Rudi van Helvoirt

All directories in a SAP system belong to one user, if you need to adapt those permission you have to do this on OS level.
Markus

No network when instantiating a template created with OVAB in Oracle VM 2.2

Similar Messages

Maybe you are looking for