No "New Remote Move Request" option anymore

We have been migrating mailboxes from Ex2010SP1 to Office365 using the EMC, and it's generally been going well. However, several of the migration mailboxes failed, and I could remove the move request from the O365 forest without issues and the mailbox
would become available for migrating again, but several of them do not. They have stayed with the green icon as though they should still be migrating, yet they have no move request left as I deleted the failed move requests. (I confirmed via
Powershell). It has been several days for most of these ones, yet they still are not available to migrate again. Other mailboxes that have not yet migrated are still available and have the option to do a "New Remote Move Request" as normal.
Has anyone else encountered this or have any suggestions for a solution to make them available to migrate again?
Ex2010SP1 on WinServer2008

Hi SeanW74,
Per your description, you migrate the exchange email system to Office 365, and have some issue with the mailboxmoverequest.
Could you please check the moverequest using get-moverequest and post the information here.
How about to reboot the exchange server and make a test?
Some information for you:
http://technet.microsoft.com/en-us/library/dd351276.aspx
Regards!
Gavin
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if
a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

New Local Move Request Script for Exchange 2010 mailboxes

Hi I would like to have a script that can enable me automatically move mailboxes of certain domains to a new mailbox database. E.g. new local move request to move only 20 mailboxes in mailboxdatabase01 with the domain name: mymove.com, moving
it to mailboxdatabase05. Also, I want to be able to adjust the number of mailboxes to move. Thanks in advance.

Wrap this, or something similar, into a script that filters out the users with that domain in a particular DB.
http://technet.microsoft.com/en-us/library/dd876878(v=exchg.141).aspx
And some filtering examples are in here:
http://blogs.technet.com/b/rmilne/archive/2014/03/24/powershell-filtering-examples.aspx
I doubt there is a sample script out there that does exactly what you want, so you'll have to do some coding.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Can't connect via outlook after remote move request.

Hi All,
i want to ask something about outlook connectivity,i was do remote move request from different forest. after move request completed, i try login the account
using ms outlook 2010. but got some error like this, "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your
folder with your outlook data file (ost)."
if i try login using OWA, its successful,
i was enable/disable MAPI from this mailbox, but not the solution. finding in google, i found this
link . but not the solution.
anyone have some experience with my trouble?.
thanks in advance.

Hi Rambosality,
According to your description, I understand that outlook cannot connect to Exchange server with error “Cannot open your default e-mail folders. You must connect to Microsoft Exchange with….” When move mailbox.
I want to double confirm some points, please help to collect answers for following question:
1. All account or some special account experience this issue?
2. How about re-create Outlook profile for test?
Please try to use Test-OutlookConnectivity and Test-OutlookWebServices test end-to-end Microsoft Outlook client connectivity, availability service and etc. More details for this command, please refer to:
http://technet.microsoft.com/en-us/library/dd638082(v=exchg.141).aspx
http://technet.microsoft.com/en-us/library/bb124509(v=exchg.141).aspx
Additional, I find an article about RPC Client Access Cross-Site Connectivity Changes. It discuss about RPCClientAccessServer setting after move mailbox cross-site, for your reference:
http://blogs.technet.com/b/exchange/archive/2012/05/30/rpc-client-access-cross-site-connectivity-changes.aspx
Best Regards,
Allen Wang

Remote Move Request

My question is - Can we migrate a mailbox from Exchange Server 2010 to Exchange 2013 with remote move request. If yes then please share a related document.
Thanks a Lot

Hi Pareek,
Thank you for your question.
If we want to create a mailbox migration cross and target forest is Exchange 2013, we suggest you upgrade source forest Exchange 2010 to Exchange 2013,
https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
Then, we could refer to the following link to migrate cross domain:
https://technet.microsoft.com/en-us/library/ee861103(v=exchg.150).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

New Local Move Request - Error: MapiExceptionLogonFailed: Unable to make connection to the server.

I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -545057711
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 45169   StoreEc: 0x824
    Lid: 44273
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 56945
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 59505   StoreEc: 0x3F2
    Lid: 52465   StoreEc: 0x3F2
    Lid: 60065
    Lid: 33777   StoreEc: 0x3F2
    Lid: 59805
    Lid: 52209   StoreEc: 0x3F2
    Lid: 19778
    Lid: 27970   StoreEc: 0x3F2
    Lid: 17730
    Lid: 25922   StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
    + CategoryInfo          : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.

Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

New mailbox move request Exchange 2010 : queued

I have deployed new Exchange 2010 server in Exchange 2003 Organization. It is simple setup one Exchange 2003 and New Exchange 2010.
I was trying to move mailbox from Exchange 2003 to 2010 and it has status of QUEUE “indefinetly”.. I have tried several mailboxes and result is the same.
Then I decided to create new database on Exchange 2010 sever. I have crate new mailbox on Exchange 2010 sever, send and receive some emails. And then try to move mailbox to new database. Same results.
I run test MSR replication and is ok.
I have increase msr LOGGING TO Maximum, no errors. I have rebooted server several times, no differences…

Hi,
Based on the description, status of mailbox move request from Exchange 2003 to Exchange 2010 is "indefinitely".
Please make sure mailbox databases in Exchange 2010 and Exchange 2003 are mounted.
Have you moved mailbox using the New-MoveRequest with the BadItemLimit and the AcceptLargeDataLoss parameters? If not, it's worth to do it again. Before you create a new move request, please check if there is any previous move request. If there is, please
clear the previous move request and then move the mailbox.
If the issue persists, please try to move mailbox to another database in Exchange 2003 and then move to Exchange 2010 to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

New Local Move Request fails with error "Multiple objects with Guid hex octet string were found."

I can find nothing searching online. Trying to move the last user mailbox from one server to another, but it fails with this error. I have checked all mailboxes for the same GUID but can't locate it anywhere. Anybody have some suggestions?

Does anyone know if there is a way to perform a search based on mailbox GUID? Maybe I could find all objects with the same and it could lead me in the right direction.
Hi,
To find the object that belongs to a GUID, you can refer to this blog.
http://blogs.technet.com/b/ehlro/archive/2010/04/22/how-to-find-the-object-that-belongs-to-a-guid.aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

New Local Move Request Stuck at 0% as queued

Dear Sir,
Environment: Company has two sites having multiple DCs, 4 Mailbox Servers (2 on each site) in a single DAG, 4 Hub/CAS servers (2 on each site).
I moved user mailbox from CRP Tier 5 to CRP tier 7, the mailbox size is around 600 MB, it has been showing as queued status for 21 hours. Both database are mounted on a same Mailbox Server.
One thing more I am using Exchange 2010 Sp2 RU1 version
-- Regards Ahsan Kamal | MCITP

I have seen issues with BB users who's mailboxes were moved to a different DB lost connectivity to their mailboxes. This was resolved by re-running bes install, which gives a selection for choosing mailbox DB's
however I did find this post
Set-MailboxDatabase -DataMoveReplicationConstraint None
which allows data to be moved on active DB's replicating in a DAG...
hope this helps...
MSP Provider (Network,Hardware,Software,WAN/LAN,Exchange,WiFi,Cisco Controllers/Routers/Switches/AP Autonomous/LWAPP)

For the new iPhone 5s - is there not an option anymore to edit imessages without deleting the whole stream? There are some things I need to keep within a stream and some not necessary, and it looks as like no editing within a conversation?

For the new iPhone 5s - is there not an option anymore to edit imessages without deleting the whole stream? There are some things I need to keep within a stream and some not necessary, and it looks as like no editing within a conversation?

Now I also know about pulling the message to the left to see the time stamp. Good to know, although I preferred it being right where I could see it without having to do a swipe or keystroke.

Exchange crash during move request, new DB in dirty shutdown

I had a hardware failure (storage controller in VM environment) during a mailbox move request to a new DB. After fixing that and rebooting, the old database came up and is fine which is great. The new database is in a dirty shutdown state right now with a few completed but most are still queued or in progress. If I try to remove the request on the completed mailboxes it has a message along the lines of, couldn't connect to mailbox database, it could be dismounted. Do you want to orphan the move request for user XYZ?
Will this cause any problems? I would like to remove the move requests and proceed recovery and repair of the dismounted DB. Thoughts?
Thanks,
Josh
This topic first appeared in the Spiceworks Community

Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

All my movies not working anymore since download the new version OS X 10.9.4

all my movies not working anymore since download the new version OS X 10.9.4

Hi Jeff,
In Safari I get this error message: Safari can't open "aam://SAP...[link of the download]" because OS X doesn't recognize internet address starting with "aam:". I thought it was a browser issue (I can't click the download button in Chrome) so downloaded FireFox but it also gives me an error message saying: Firefox doesn't know how to open this address because one of the following protocols (aam) isn't connected to any program or allowed in this context.
I don't have Creative Cloud Membership, I received a CD with Photoshop Lightroom 5 with my new camera from Samsung. Because my MacBook Air doesn't have a DVD drive I figured I should download it. Couldn't find Lightroom 5 in the Appstore so I figured I should download a trial version and simply add the key from the DVD. Unfortunately I can't even download the trial version due to these error messages.
Hope you can help!
Thanks,
Ivana

Adding new Remote System unavailable in Web Service Request

Hi,
I created a CRUD Web service from a table using web service generator.I added a new remote system to the repository.When I invoke the create operation (which has key mapping "Yes"),it says "Remote System not found in the repository"
I am able to view the Remote System via Data Manage though.
Any ideas?
Regards,
Premjit

Hi Premjit,
When did you added new remote system?
Before generating web services.
Or After generating web services.
If you have added remote system after generating web services.
Then try re-generating web services using web service generator.
Regards,
- Shailesh

Requesting a New Remote Control

One of our remote controls wound up in the washing machine along with the bed sheets. It's no longer working, even though we dried it out and changed the batteries. Is there a way to obtain a new remote control?
Thanks!
Solved!
Go to Solution.

you can order a new one (free) without having to call in and wait on hold. you have to download the VZ in home agent to your PC (www.verizon.com/connect) and then once it's installed, you open the program, go to the tv section, then click on the remote and then you'll see "order new remote control"
its fast and easy.

Creative Megaworks 250D 2.1 THX: How can I find a new remote control & spare satellite(s)?

Hi all,
For years, we have owned and used one remarkable speaker set from Creative:
The Creative Megaworks (Cambridge Soundworks) 250D 2.1 THX-certified speakers!
I have no complaints. The sound this small 2.1 set produces is amazing! The 300 watts (RMS) power can shake the whole house - x50W + 2x75W are more than enough! Movies, music, games, everything sounds great - bass is deep and clear, mid-range is good, high frequences are clear! There's no noise and no distortion (I have connected the system to an SPDIF digital connector on my sound card), the Signal-to-Noise ratio is 99 dB, and the frequency response of the set is extremely good, too!
But I have a problem, now. We have broken, by accident, one of the satellites. Now I have only one satellite, and the bass/amplifier with the remote control... Looks like a . system... ;-)
This system was a present for us. Maybe we were lucky, but I am very happy with the build quality of this Creative spaker set. Until we have broken one of the satellites ourselves, yesterday, everything was OK, and the sound it produced was amazing all these years...
I tried to contact a Creative representative, asking if we can maybe order one (or two) spare satellites fot this set, but the only reply (up to now) was:
"You are out of warranty period. Buy a new speaker set."
Well, we could, I guess...
But:
First: Creative does not have (at present) a similar model, 2.1, THX certified, with digital (SPDIF input), 300W+ RMS, 99 dB Signal-to-Noise.
Second, to throw away such an amazing set just because there's one satellite broken? That would be such pity! :-(
I'd like to buy one (or two) new 250D satellites. I was thinking even that, in the worst case, I can maybe try to order 2 satellites from a Creative Gigaworks S750 set. They have very similar characteristics, 70W rms power, 8 ohms, so maybe this'll work. I was trying to check today if two satellites can be ordered, but with no luck up to now... :-(
Does anyone have any similar experience? What do you do if you accidentally have broken up one satellite from a 2./5./7. expensi've speaker set? Should you throw away the whole set? Try to find similar satellites?
I hope Creative support will help, but I don't have much hope, at present...
Does anyone have experience connecting an S750 satellite to a 250D system? Can I expect any problems? Or it'll work?
Finally, just one more question:
The remote control.
Currently, the remote control unit on our 250D model works OK. But I am a bit worried, if anything happens, that the speaker set can become useless. So I'd like to order one spare new remote control for this model, just in case. Can someone help?
Maybe, even if this speaker set is not produced anymore, a new remote control can be ordered from Creative?
I'd really like to make these 250D speakers produce great sound again!? I am a big Creative fan and Creative 250D 2.1 THX is one of the best sound systems I have ever owned (or heard) and I'd like to do everyting to fix things up...
Thanks for all the help!
Cheers! :-)
PS The satellites of the 250D look very much like these. But these Cambridge Soundworks satellites are more powerful (20W RMS); I was even thinking to order a pair of them, but not sure if they'll fit well. Maybe a pair of S750 satellites (70W RMS) is a better idea? But in any case, if I can find a new pair of satellites, what to do with the remote control?... Please, help!

After exchanging several messages with official Creative Support, I feel a bit disappointed... For years, I have believed that Creative is a company that makes amazing audio products. They probably still do, but now that I am a customer who owns an expensive product of theirs, but with expired warranty, they don't want even to suggest a solution that can work for both parties!
Why is Creative Support so un-supportive? :-( I am still a Creative customer, after all, right?
My communication with Support went nowhere. After it was established that our 250D system is out of warranty period (it is only 2 years, btw), they refused to sell me a replacement satellite (even if they still may have some left in stock, for such cases)!
Finally, I found S700 satellites on ebay and I hope that 2 of them will fit well with the 250D system. Impedance of 250D satellites is 8 ohms (S700 satellites are 8 ohms, too), power is almost the same (250D satellites are 75W rms, and S700 are 70W rms), Signal-to-Noise of both systems is 99 dB, and frequency response is similar, too (250D satellites should be around 50Hz - 8 kHz, I think, and S700 should be around 50Hz - 20 kHz).
Well, my final 'point of worry' was that if anything happens with the remote control, we won't be able to switch on/off the system, even if the sub/amplifier works. So, I tried to ask Support just to sell me one new remote control, if they can. To sell, not to give for free, mind this! ;-)
They refused!
My e-mails are either left un-answered, or the only kind of reply I get is 'We can offer you 10% off our new products'. Well, I don't want to buy a whole new expensi've system, if I can just get 1-2 replacement parts for my old one, and have it working for years! :-)
(Imagine you buy an expensive DSLR camera, you break the LCD screen, and imagine how Canon or Nikon refuse to sell you a replacement LCD, because you're out of warranty! I can't imagine that!)
Well, with Creative it looks like this works only this way: Buy a new system. While speaker system is within its warranty period, Creative may replace defecti've and/or broken parts. Once system is out of warranty period, you can simply throw the system away, as Creative will not sell you replacement parts, no matter how politely you ask (and no matter if such parts are available at Creative or not)!
I hope I will be able to use our 250D system for some more time (after the satellites arrive). I don't know how I can find a new remote control, just to be on the safe side.
And I am not sure I will buy Creative product next time. I will carefully look around and maybe will pick up a product from a company which will offer me not only warranty support, but out-of-warranty support, too. That would be wise.
I like how the high-end Creative speaker systems sound. I simply cannot understand how this company can be successful, if they make such great products, but then refuse to help its customers, when they have problems... :-(

Can't move a mailbox anymore

Dear all,
I'm having troubles migrating to Exchange 2013... I'm unable to move any mailbox anymore.
When I create a new move request, it stays forever in "queued" status. Now this request has been removed, but I've noticed that when I do the following command, I still have a result :
Get-MoveRequestStatistics -MoveRequestQueue "users mailbox" give me the result :
DisplayName StatusDetail TotalMailboxSize TotalArchiveSize PercentComplete
User Queued 728.3 MB (763,717,331 ... 1.134 GB (1,217,377,9... 0
But if I do Get-MoveRequestStatistics user I get nothing. I've also checked with ADSI edit if the fields for moves were holding something but they are all empty.
I think the result above is the reason why I can't move anything anymore (move is kinda stuck at database level), but I don't know how to remove it.
Any hint/help ? Thanks in advance ! :-)
PS : this database was before synced with a distant DAG copy. I've removed the copy when I started having issues. Copy was configured with "-DataMoveReplicationConstraint None" in order having issues with the DAG queue while moving mailboxes.

Check if move request is still in queue using Get-MoveRequest, try running Remove-MoveRequest to remove mailbox move. Try -whatif switch next time to see if find errors
Regards
SK

No "New Remote Move Request" option anymore

Similar Messages

Maybe you are looking for