No object type found for the corresponding message in BPM
Hi All,
I have a BPM scenario where i pick a file and based on a condition in the Switch i send the meesage to Mail or Proxy.
When i tested the scenario i got error as "no object type found for the message check the corresponding process activated" error in the call adapter step.
I checked in sxi_cache, IP is active with 0 as return code .
When checked in sxmb_moni_bpe, under process selection it says "No workitem exists"
In SXMB_MONI, under inbound i clicked PE but got error as "Unable to perform action fro the selected Message" is displayed.
Im new to BPM so please tell me as what Im missing exactly.
Thanks
Hi Sachi,
Delete the Integration Process from ID and reimport it. Also check the status of your BPM in T Code SXI_CACHE....if return code is not '0' then re-activate your integration process..
Try REPEAT ACTIVATION on SXI_CACHE...
Have a look into this..
Re: Stuck in BPM Transformation process Async to Sync Scenario
Regds,
Pinangshuk.
Similar Messages
-
S/A bridge problem: No object type found for the message
Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
<i> <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error></i>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
BobFirst of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob -
For your info.
I have searched SDN today for a solution to an error message found in XI message monitor (trx SXI_MONITOR) when sending a message to BPM:
<b>No object type found for this message; check the activation of the corresponding process</b>
Well, I found a lot of threads, but with no good answer for me.
So, here's my self-solution: I was just missing the Interface Determination (really don't know why) bringing from Outbound to Abstract message interface. So XI message was definitely correct.Hi,
Make sure that the first receive step in your integratiopn process uses the abstract interface that u defin in the interface determination.
Also check if you have used all the objects that you have created. Some times 'No object type found' error happens if your BPM is not activated.
Also check the activation log and see if there are any errors. Refrech the cache in SXI_CACHE. Check if the return code is 0.
Hope this helps.
Regards.
Praveen -
No object type found for this message
Hi all,
I have a file 2 file scenario which works fine.
I tried implementing BPM in the same scenario following the link:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
The sender channel is working fine and the file gets deleted from the source folder.
But the output file is not getting generated.
The error msg displayed in SXMB_MONI is:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What can be the possible problem.
Pls help
Thanks in advance
Regards,
NeetuHi,
<i>>>Are you getting 2 entries in the SXMB_MONI for this File to File Scenario?</i>
No i am getting a sigle entry in which the sender service is the file system and the receiver service is the Integration Process.
<i>>>Do you have 2 receiver determinations.
i.e 1) File to Integration Process
2) Integrtaion Process to File</i>
Yes i have the above 2 receiver determinations.
<i>>>Also go to SXI_CACHE and check the Runtime version of your Integration PRocess.</i>
the runtime version of my integration process is 2.
I also tried activating my integration process in SXI_CACHE but the version remains 2.
What can i do next?
Pls guide
Regards
Neetu
There is one SAP note, but may not be related here.i.e 816778 -
No administrator found for the task Message no. 5W141
Dear all,
i am doing asset mass changes i am not able to release my work list (AR31) it"s giving message like
No administrator found for the task Message no. 5W141
plz can any one help me following steps i followed
1.substitution for assets mass changes to substitute Dep Key
condition is asset class = 15000 and Dep area = 01
substitute with Dep key S200
for 15000 asset class actually dep key S475
2.i created work list for asset class 15000 and dep area 01
then attached my substitution
3. in AR31 here all assets status is Ready when i release work list it"s giving message same
i tried in DEV and QTY no solution
this is high priority in my project
plz Dear friends send reply
Regrds
GovindHI Jayendra
I am having the same problem with releasing the worklist in AR31.
No administrator found for the task
please let me know the solution.
Thanks
Sharath -
Getting "No Object type found error" in BPM sceanrio.
Hi Friends,
I am doing File to RFC with response sceanrio using BPM. For this i configured one receiver step, one send synchronous step to send input message to RFC and one asynchronous send step to send the response to a file.
I have configured 3 receiver determinations(file to bpm,bpm to ECC, bpm to file), 3 interface determinations(file to bpm, bpm to ecc, bpm to file) and 2 Receiver agreements(bpm to ecc and bpm to file).
I am getting the followin error:
No object type found for the message. Check that the corresponding process is activated
My sxi_cache has return code as ' 0 '. And as suggested in some threads, i deleted the objects and recreated them again. but still getting the same error.
Please help me in solving this issue.
Thanks & Regards,
Senthil.Hi Senthil,
Is all the objects created in IR and ID are reflecting in SPROXY tcode.
Check SM59=> AI_JCO_Server connection is working or not ?
Check SXMB_IFR tcode is working fine or not ?
Check sm22 and let us know the dumps are there ?
Check default trace files for any errors in the following paths ?
1.usr/SAP/X7systemname/DVEBMGS07/J2EE//cluster/server0/log/defaulttrace.trc
2.usr/SAP/X7systemname/DVEBMGS07/J2EE//cluster/dispatcher/log/defaulttrace.trc
3.usr/SAP/X7systemname/DVEBMGS07/J2EE//cluster/dispatcher/logs/services/http/req_resp.trc
Thanks,
Jogula Ramesh -
No documents found for the selection in J1INEMIS-new TDS report for India
Dear all,
In J1INEMIS the error is coming:
No documents found for the selection
Message no. 8I760
what can be the reason.
regardsTo get TDS certificate we use T code J1INMIS, Pls dont go to This T code: Follow this:
1. J1INCHLN
2. J1INBANK---Bank no, will be Check Issue A/C.
3. J1INCERT----In this document date should be end of the month date exampl=31/03/2011
After giving all the details in J1INCERT
select - Ctrl S (Save the document_
you will see the below screen (Variant) give variant name XXX Description (Check Printing)
save, you will get 16A Form. -
Issue with the change pointer for the reduced message type ZMATMAS
Hi All,
I have created reduced message type ZMATMAS for the MATMAS to create a Idoc when change or insert material master data fields( MARA-LAENG, MARA-BREIT, MARA-HOEHE) . My Problem is that the Idoc is generated with the status (03) but the fields(LAENG, BREIT,HOEHE) are not getting fill with the values. They are always filling with the values '/'). I have done the following steps to create idoc for the change pointer. Please check whether i have missed some steps.
1. Create reduction maintenance ZMATMAS (Tcode BD53)
keep the default selected segments E1MARAM, E1MAKTM
2. Add following data to maintain table view for the message type ZMATMAS (Tcode BD52)
Object Table Name Field Name
MATERIAL MARA KEY
MATERIAL MARA LAENG
MATERIAL MARA BREIT
MATERIAL MARA HOEHE
3. Activate particular change pointer in BD50
Message Type Active
ZMATMAS yes
4. Activate change pointers u2013 Generally (Tcode BD61).
5. Assign Segment fields to change document fields (Tcode BD66 )
Segment Type Field Name Object Table Name Field Name
E1MARAM BREIT MATERIAL MARA BREIT
E1MARAM HOEHE MATERIAL MARA HOEHE
E1MARAM LAENG MATERIAL MARA LAENG
6. I have done the distribution model settings (BD64) and the idoc configurations
1. Logical System
2. RFC destination
3. Create port
4. Create partner profile
7. I changed the fields in material master data(Tcode MM02) and I executed the Tcode BD21.
Idoc is generated but the fields are not getting fill with the values
(Note: some fields are filled with values e. g material number, material description)
I checked the Idoc data segment E1MARAM (WE02)
Fld name Fld cont.
LAENG /
BREIT /
HOEHE /
Can you please let me know the issue
PradIssue is solved when I select the segments and the fields in the segments (Tcode :BD53)
Prad -
Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."
Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/
-
No administrator found for the task error message
Dear all,
I got the message "No administrator found for the task" when the MSS user try to approve and overtime. When i double click on the error for details, it actually give
WF notification:work item cannot be executed message no. 5W141. As got overtime, i am using the standard task 20000460 which i already maintain the agent as general task. I am using the Agent (Default Rule) rule number 157 (Superior (chief position)).
I tested it in my development and it works, however it does not work in my production. Do i miss any setting or parameter?
My R/3 backend is 4.7 with Enterprise Portal 6.
Thanks
Regards,
BryanYou hvae to refresh the organizational assignment and you can do it from SBWP txn ,
1.Execute SBWP.
2.On Menu clcik on Settings -
> Workflow Settings -
> Refresh Organizational Assignment .
and now you try to execute the workitem now you find see the error. -
OC4J 10.1.2 - No XPathFactory implementation found for the object model
Hello,
We are doing some maintenance on an old 10.1.2.3.0 container. The project has to be extended with a library built with xml-apis-1.3.03.jar. I know you will suggest a upgrade, but that is a no-go - sorry, since other projects also are running on this server. So I hope some of you remember or know how to avoid or replace the oracle xml parser.
It seems like it gets the wrong XPathFactory
XPathFactory#newInstance() failed to create an XPathFactory for the default object model: http://java.sun.com/jaxp/xpath/dom
with the XPathFactoryConfigurationException: javax.xml.xpath.XPathFactoryConfigurationException: No XPathFctory implementation found for the object model:
I have searched the documentation for 10.1.2 and everything relevant on the Internet for a solution, but i seems to non-trivial when dealing with oracle xml parser. We tried to put the jar-files (xml-apis-1.3.03.jar, xercesImpl-2.8.0.jar, xalan-2.6.0.jar) in the endorsed library under the jdk, and we have already added <web-app-class-loader search-local-classes-first="true" include-war-manifest-class-path="true"/> to our orion-web.xml.
I also know that the <shared-library> tag got introduced in 10.1.3 where you easily can replace the parser.
Any ideas on how to deal with this exception or comments to the interpretation on the exception are appreciated.
-MKHello,
You are correct, in OracleAS 10g (10.1.2), Oracle does not expose JMX MBean server.
OracleAS 10g R3 (10.1.3) is a J2EE 1.4 container will full support for JMX, and all the JSR-77 MBeans exposed. You can also create and register your own MBeans.
Could you give us the different requirements you have around JMX for your application?
Regards
Tugdual Grall -
Error message when no atachment found for the workitem while approving ?
Hi Folks,
I need some help in this issue please.
Requirement is, Agent needs to attach a document to work item and then approve. To achieve this, i have put code in for complete execute condition of the step.
This is how it works, when agent attaches doccument and approves, it completes workitem and when there is no attachment, it does not complete work item but it does not stop agent by throwing anykind of error message.
I need a error message when there is no atachment found for the workitem and agent tries to approve it. Please suggest how i can get this done ?
Thanks a lot in advance..
PrasuHi
There a couple of different ways to accomplish this.
If your not using standard task/methods your able to extend your method. In here just check if a document is attached, display a message with the message statement, or a FM (e.g. TH_POPUP_TO_INFORM), and then call the workflow statement "<b>Exit_Cancelled</b>", by doing this the workitem will stay in the inbox, in status in process until the document is attached.
If your using standard task / Methods, you need to check if a document is attached in the workflow logic, preferably in a condition. Now - if no document has been attached create a loop, and within this loop create a task, for displaying the message. A easy solution here could be a simple decision task with only one Decision, or if you are able to do some ABAP development, create a small method for displaying the message.
In order to make sure that this task/message will popup immediately, create a container element e.g. "Last_Agent", the do a binding from the decision task to the workflow container ActualAgent -> Last_Agent. Now you Last_Agent as the agent for you "Display Message" Task
Regards
Morten Nielsen -
Trading partner agreement not found for the given input values
Hi,
I am working on EDI X12 over generic exchange outbound.
In enqueue script:
replyToMsgID =
from =TEE
to =RF
actionName =BASFEDI841
doctypeName =841
doctypeRevision =4010
msgType =1
payload =RF_841_4010_1_12.xml
attachment=
I am getting the Trading partner agreement not found.
B2B log:
***** REQUEST MESSAGE *****
Exchange Protocol: Generic Version 1.0
Transport Protocol: FTP
Unique Message ID: TEE_2009Mar01_15_37_29_170.dat
Trading Partner: RF
Message Signed: No
Payload encrypted: No
Information incomplete
2009.03.01 at 15:37:29:477: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Exit
2009.03.01 at 15:37:29:477: Thread-20: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:29:477: Thread-20: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:29:478: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
2009.03.01 at 15:37:32:910: Thread-21: B2B - (DEBUG)
Protocol = FTP
Version = 1.0
Transport Header
filename:TEE_2009Mar01_15_37_29_170.dat
filesize:7787
file_ext:dat
fullpath://users/dab2b01/RF841/TEE_2009Mar01_15_37_29_170.dat
timestamp:1970-01-01T00:00:00.000-00:00
2009.03.01 at 15:37:32:973: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) InterfaceListener:onMessage - Invoke inbound callout - null - null
2009.03.01 at 15:37:32:975: Thread-21: B2B - (DEBUG) InterfaceListenersyncAckEBMSchecking header names
2009.03.01 at 15:37:32:975: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
2009.03.01 at 15:37:32:998: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
2009.03.01 at 15:37:32:999: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:onMessage sendEventtrue
2009.03.01 at 15:37:33:005: Thread-21: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:33:011: Thread-21: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.03.01 at 15:37:33:011: Thread-21: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:33:012: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:33:014: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Enter
2009.03.01 at 15:37:33:014: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processEvents begin transaction
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Enter
2009.03.01 at 15:37:33:019: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Exit
2009.03.01 at 15:37:33:020: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Enter
2009.03.01 at 15:37:33:027: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Exit
2009.03.01 at 15:37:33:028: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
2009.03.01 at 15:37:33:042: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
2009.03.01 at 15:37:33:042: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
2009.03.01 at 15:37:33:043: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Enter
2009.03.01 at 15:37:33:043: Thread-20: B2B - (DEBUG) MimePackaging:doUnpack:Enter
2009.03.01 at 15:37:33:044: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
2009.03.01 at 15:37:33:044: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = UTF-8
2009.03.01 at 15:37:33:045: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@8a2023
2009.03.01 at 15:37:33:045: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Exit
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
2009.03.01 at 15:37:33:047: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {FTP}
2009.03.01 at 15:37:33:047: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = TEE_2009Mar01_15_37_29_170.dat
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = FROM_PARTY - TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage File TP Host name = TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage fromParty = TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:049: Thread-20: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: null Value: null
2009.03.01 at 15:37:33:049: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage security info NULL
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Exit
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Enter
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage toTP null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage hubUrl null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Exit
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage ProtocolCollabId = null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage CollaborationName null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Enter
2009.03.01 at 15:37:33:058: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate check non-RosettaNet Message
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Exit
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Protocol Collaboration Id : null
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument Enter
2009.03.01 at 15:37:33:063: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor enter
2009.03.01 at 15:37:33:064: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor edi = X12
2009.03.01 at 15:37:33:064: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor segment delimiter is 27
2009.03.01 at 15:37:33:073: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument preprocess result =
ISA~00~Authorizat~00~Security I~01~Interchange Sen~01~Interchange Rec~090301~1935~U~00401~000001101~0~I~+'GS~SP~Application Sen~Application Rec~20090301~1537~1101~T~004010'ST~841~5709'SPI~00~01~Reference Identification~Entity Title~Entity Purpose~A~00~01~00~10~Source Subquali~773~1~AA~0001'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'NTE~AAA~Description'X1~C~Export Licen~C~~1~1~COU~SCHEDULE B~D~252876~59154.0269~A~01~8~U~Identification Code'X2~Import License Number~~20090301~~20090301~20090301'X7~Free-Form Message~Free-Form Message'AMT~1~1~C'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'DTM~001~~~01~CC~Date Time Period'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'N1~01~Name~1~Identification Code~01~01'N2~Name~Name'N3~Address Information~Address Information'N4~City Name~ST~POSTAL CODE~COU~A~Location Identifier'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'HL~1~~1~0'SPI~00~01~Reference Identification~Entity Title~Entity Purpose~A~00~01~00~10~Source Subquali~4~1~AA~0001'RDT~A~Revision Value~001~~~01'PRR~Assigned Identificat~10~Source Subquali~BRK~Description~10~Source Subquali~A~10~Source Subquali~1'PRT~EXC~10~Source Subquali~N'PRS~1~Description'LIN~Assigned Identificat~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'MSG~Free-Form Message Text~AA~3'N1~01~Name~1~Identification Code~01~01'N2~Name~Name'N3~Address Information~Address Information'N4~City Name~ST~POSTAL CODE~COU~A~Location Identifier'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'N9~01~Reference Identification~Free-form Description~~~01~01+Reference Identification+01+Reference Identification+01+Reference Identification'PID~F~01~10~Product Desc~Description~1S~Source Subquali~N~LAN'PKD~AMM01~Source Subquali~10~Packagi~L'QTY~01~1~01+3+60.42665+01+5+3+01+1+51887.5+01+6+7.79+01+2+3953.97808'MEA~9L~1~6~01+5+56318.8+01+1+30.72+01+1+1+01+7+8887.19467+01+6+661.97698~6~7~01~~1S~BM'MEA~9L~1~5~01+3+696.4+01+4+4+01+3+1221.27922+01+1+994232.001+01+3+872.859~3~9~01~~1S~BM'MEA~9L~1~3~01+8+8+01+1+7.75+01+2+6.395+01+1+2.1+01+6+7.59~6~4~01~~1S~BM'MEA~9L~1~6~01+6+7393.71+01+3+54258.8579+01+8+28012.940+01+5+8+01+7+8.8~9~9~01~~1S~BM'MEA~9L~1~8~01+5+8661152.98+01+7+6356848.72+01+7+1010847.39+01+5+4939.33859+01+3+7.84050~8~4~01~~1S~BM'UIT~01+7+8.3+01+2+8.702047+01+8+323.16049+01+8+40699.4+01+5+30.909~1~AA'LOC~01~Reference Identification~Description~Reference Identification~Catego~01~Reference Identification~Description~Reference Identification~6~01+7+257.30155+01+1+963640.085+01+1+9.42+01+4+1+01+3+67.61~8~01+6+3.6+01+2+20.5+01+4+6.99+01+7+5+01+5+213.507492~5~01+2+3077486.5+01+7+78023.621+01+3+6.74+01+7+138554.0+01+3+4111.4~2~01+9+2.6+01+8+91290.0173+01+9+1.9+01+2+6.168+01+1+26.9~2~01+2+1+01+6+67348.246+01+4+8.50+01+7+37.63+01+5+130691508.0~1~01+5+8.39+01+1+2.0+01+6+7.3+01+5+173.68084+01+5+550.4928~01~Reference Identification~Description'PWK~01~1~26~01~1~Identification Code~Description~1+1+1+1+1~AR'PKG~F~01~10~Packagi~Description~01'MEA~9L~1~6~01+9+99.2217+01+5+6.5043+01+8+30.76+01+9+3+01+1+7~3~2~01~~1S~BM'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'DTM~001~~~01~CC~Date Time Period'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'LX~6'LIN~Assigned Identificat~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID'TMD~01~10~Product Desc~01~01~Description~~Reference Identification~Source Subquali'MEA~9L~1~4~01+7+71.1+01+2+277.0+01+2+9.19003+01+1+901.516+01+3+7803582.87~8~7~01~~1S~BM'PSD~01~01~9661549~01+2+140318.0112+01+3+30.74740+01+9+67.17+01+7+5.1130+01+3+56743.0~01~01~01~Description'SPS~193487350~66823328~472426~5.6~01+3+519.45554+01+6+145146.03+01+2+63994262.5+01+3+1.3166+01+8+4.7~440443'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'EFI~00~Free-Form Message Text~9A~Version Identifier~Program Identifier~Version Identifier~Interchange Format~Version Identifier~Compression Technique~A0~File Name~Bloc~7~84410~Version Identifier~ASB'BIN~3~hii'CID~1~01~10~Product Desc~Description~Source Subquali~N'UIT~01+6+940.5+01+3+4.7+01+9+3.1+01+6+58.1+01+2+115728.9010~3~AA'TMD~01~10~Product Desc~01~01~Description~~Reference Identification~Source Subquali'PSD~01~01~595~01+1+5.139+01+3+1+01+5+4+01+5+19.1+01+5+3441.57231~01~01~01~Description'CSS~GC~01+1+33832819.6+01+1+1.5332+01+5+1.1+01+1+12173.83+01+5+813.282453~874~27~1~2~38'SPS~9~1154210~75~9.5~01+2+473.9+01+5+28.394421+01+6+755.69932+01+3+8407.2+01+3+1~54261910'MSG~Free-Form Message Text~AA~66511'MEA~9L~1~3~01+6+4.979+01+8+60.167241+01+8+48.03003+01+1+1.6086+01+5+2417168.92~3~1~01~~1S~BM'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'STA~01~9~01+6+66133.5+01+1+1+01+6+45813032.4+01+3+3329.6+01+7+63878.29~1~9L~3~5~01'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'CRF~01+6+7050.3+01+3+892.07605+01+6+847.7520+01+7+4+01+4+1.7~59.926'LS~CID'CID~1~01~10~Product Desc~Description~Source Subquali~N'MEA~9L~1~1~01+2+316324.35+01+8+852.8+01+7+4.2+01+8+6.3+01+7+9.3~2~4~01~~1S~BM'STA~01~6~01+2+751.60984+01+2+5+01+7+60.63+01+3+5366069.5+01+7+1.891~1~9L~1~8~01'LE~CID'EFI~00~Free-Form Message Text~9A~Version Identifier~Program Identifier~Version Identifier~Interchange Format~Version Identifier~Compression Technique~A0~File Name~Bloc~2~64~Version Identifier~ASB'BIN~3~hii'SE~91~5709'GE~1~1101'IEA~1~000001101'.... b2b.log:
2009.03.01 at 15:37:33:077: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Enter
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl validateEnvelope = false
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Leave
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
2009.03.01 at 15:37:33:079: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@43da1b
2009.03.01 at 15:37:33:085: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
2009.03.01 at 15:37:33:085: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2009.03.01 at 15:37:33:107: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeSenderID Val = Interchange Sen
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeSenderQual Val = 01
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode standard = X12
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeReceiverID Val = Interchange Rec
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeControlVersion Val = 00401
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeReceiverQual Val = 01
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Group Key = GroupSenderID Val = Application Sen
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X12 Doc Revision : 004010
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X12 Doc Revision : 4010
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Group Key = GroupReceiverID Val = Application Rec
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Transaction Count = 1
2009.03.01 at 15:37:33:111: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode DocType = 841
2009.03.01 at 15:37:33:111: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeReceiverQual = 01
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeSenderID = Interchange Sen
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeReceiverID = Interchange Rec
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupReceiverID = Application Rec
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeControlVersion = 00401
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupSenderID = Application Sen
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeSenderQual = 01
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument exit
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Enter
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate msginfo reftomsgid is null, nothing to correlate
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Exit
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage number of b2b messages 1
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage msgtype = 1
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processIncomingTPA() Begin TPA Processing..
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (before calling processParty) :
initial : null
from : TPName: TEE Type: null Value: null
to : TPName: null Type: null Value: null
final : null
initiating : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() direction is incoming
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() calling processparty with : TPName: null Type: null Value: null
2009.03.01 at 15:37:33:116: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Begin..
2009.03.01 at 15:37:33:119: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() after calling processparty : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:119: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (after calling processParty):
initial : null
from : TPName: TEE Type: null Value: null
to : TPName: TEE Type: null Value: null
final : null
initiating : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:120: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() docTypeName: 841 docTypeRevision: 4010
2009.03.01 at 15:37:33:127: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() actionName: BARFEDI841 actionRevision: 1.0
2009.03.01 at 15:37:33:127: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getCollaborationDetails() Begin.. Activity Name : BARFEDI841 Activity Version: 1.0
2009.03.01 at 15:37:33:131: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() eventName:<BARFEDI841>
2009.03.01 at 15:37:33:131: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() messageType:1
2009.03.01 at 15:37:33:136: Thread-20: B2B - (DEBUG) calling setMode() changing from -1 to 2
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: TEE Type: null Value: null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() cpaID=null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() Begin..
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA()
From Party -> null-null-TEE-null To Party -> null-null-TEE-null Business Action name -> BARFEDI841
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() Begin..
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() fromParty: TPName: TEE Type: null Value: null toParty: TPName: TEE Type: null Value: null initiatingParty: TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:139: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() SELECT ag.name FROM TIP_BusinessAction_ra ba1, TIP_Party_ra tp1, TIP_BusinessAction_ra ba2, TIP_Party_ra tp2, TIP_SupportedBusinessAction_ra sba1, TIP_SupportedBusinessAction_ra sba2, TIP_Participant_ra tpp1, TIP_Participant_ra tpp2, TIP_Agreement_ra ag WHERE tp1.name = ? AND ba1.name = ? AND ba1.revision = ? AND sba1.isinitiator = ? AND tpp1.agreement = ag.ID AND tpp1.supportedbusinessaction = sba1.ID AND sba1.tradingpartner = tp1.ID AND sba1.businessaction = ba1.ID AND tp2.name = ? AND ba2.name = ? AND ba2.revision = ? AND sba2.isinitiator = ? AND tpp2.agreement = ag.ID AND tpp2.supportedbusinessaction = sba2.ID AND sba2.tradingpartner = tp2.ID AND sba2.businessaction = ba2.ID AND tpp1.agreement = tpp2.agreement AND ((ag.effectivefromdate <= SYSDATE) OR (ag.effectivefromdate IS NULL)) AND ((ag.effectivetodate +1 >= SYSDATE) OR (ag.effectivetodate IS NULL))
2009.03.01 at 15:37:33:139: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() bind vars: TEE,BARFEDI841,1.0,Y,TEE,BARFEDI841,1.0,N
2009.03.01 at 15:37:33:145: Thread-20: B2B - (ERROR) Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2345)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:186)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:587)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:238)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1832)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2573)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2443)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2398)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2009.03.01 at 15:37:33:145: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: processIncomingMessage B2BDE
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {filename=TEE_2009Mar01_15_37_29_170.dat, filesize=7787, file_ext=dat, fullpath=//users/dab2b01/RF841/TEE_2009Mar01_15_37_29_170.dat, timestamp=1970-01-01T00:00:00.000-00:00}
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
2009.03.01 at 15:37:33:148: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:148: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
2009.03.01 at 15:37:33:155: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
2009.03.01 at 15:37:33:171: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
2009.03.01 at 15:37:33:182: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2009.03.01 at 15:37:33:182: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2009.03.01 at 15:37:33:189: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name TEE
2009.03.01 at 15:37:33:189: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value nullnull
2009.03.01 at 15:37:33:196: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name BARFEDI841 BusinessAction_0E95
2009.03.01 at 15:37:33:207: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2009.03.01 at 15:37:33:217: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2009.03.01 at 15:37:33:218: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
2009.03.01 at 15:37:33:218: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2009.03.01 at 15:37:33:220: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = TEE_2009Mar01_15_37_29_170.dat@0A4DBD5D11FC2AEDA770000018E26600
2009.03.01 at 15:37:33:220: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg protocolCollabID = null
2009.03.01 at 15:37:33:226: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
2009.03.01 at 15:37:33:226: Thread-20: B2B - (DEBUG) Engine:notifyApp Enter
2009.03.01 at 15:37:33:232: Thread-20: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A4DBD5D11FC2AEDA680000018E265F0</b2bMessageId>
<errorCode>AIP-50547</errorCode>
<errorText>Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate</errorText>
<errorDescription>
<![CDATA[Machine Info: (dgia21a.TEEis.com)
Description: Unable to identify the trading partner agreement from the given input values. Also verify agreement effectiveToDate
StackTrace:
Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2345)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:186)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:587)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:238)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1832)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2573)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2443)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2398)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2009.03.01 at 15:37:33:244: Thread-20: B2B - (DEBUG) Engine:notifyApp Exit
2009.03.01 at 15:37:33:244: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Exit
2009.03.01 at 15:37:33:246: Thread-20: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:33:263: Thread-20: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.03.01 at 15:37:33:263: Thread-20: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:33:264: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit -
No shared library found for the database with ID DBID
Hi SDN,
We're trying to connect our BW system under WIN/MSSQL 2005 to an source system (RSA1) witch is an DATABASE DB4 on OS400.
when we check the database connection, it gave us the error
No shared library found for the database with ID DBID
in SM21 we've found
As well as the standard connection, an attempt was made to set up
another database connection, under the specified ID. The Shared Library
for this second database could not be found.
The Shared Library is usually found in the the Executable
directory (profile parameter DIR_LIBRARY) under the name dbs
<dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
stands for the operating system-specific extension of the Shared
Libraries.
The database type is determined from the entry that corresponds to the
specified DB ID in the table DBDCON. Check whether the data in this
entry is correct.
someone can guide me were to found DBSL library for this time of external connection from Windows to DB4?
thanks in advance,
best regards,
Pedro RodriguesHi again,
after download dbdb4slib.dll and copied it to kernel directory, it gave this error message
B create_con (con_name=DBID)
B Loading DB library 'E:\usr\sap\SID\SYS\exe\run\dbdb4slib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\SID\SYS\exe\run\dbdb4slib.dll) Error 126 [dlnt.c 237]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'E:\usr\sap\SID\SYS\exe\run\dbdb4slib.dll'
[dbcon.c 4672]
B ***LOG BYG=> could not load library for database connection DBID [dbds#3 @ 1035] [dbds 1035 ]
someone has some idea?
thakns -
KB15N_No adjustment account found for cost element Message no. K5112
When I am trying to post Manual Cost Allocation through TC KB15N with the following input data I am getting the following error message and the same could not be posted. Kindly advise.
Screen Variant used: 01 SAP Cost Center
Input Type: List Entry
Item No.1
Sender Cost Center : 3402100942
Cost Element: 6200001
Amount : 62,201.56
Receiving Cost Center: 3405100945
First four digits represent profit center code. If first four digits are equal the above error is not coming. But posting is needed with different profit centers.
No adjustment account found for cost element
Message no. K5112
Diagnosis
Neither standard account determination nor the enhanced function found an adjustment account for the reconciliation posting.
System Response
No adjustment account could be determined for cost element in company code SCCL.
Procedure
Maintain the standard or enhanced account determination for transaction KAMV. Information on maintenance can be found in the program documentation.
ExecuteHi all,
I face the issue like this but with transaction KOAP - Plan settlement
But, the problem is that, I do not active reconciliation ledger, so I do not maintain any thing relate to reconciation ledger or adjustment posting? I can do transaction "actual settlement" without error
So, How this error come to me?
And how I can fix it?
Thanks all!
Maybe you are looking for
-
Link between A/R Invoice and the A/R credit memo
dear all how do we find the link between A/R invoice and it's credit memo from the database level. Thanks & Regards Kanishka Wickrama
-
Images not appearing when saving a Framemaker book to pdf
As a new user to Framemaker, I have had great success with these forums in the past. So, thank you. First off, I am using Framemaker 12. I have had no problems in the past, but now when I save a file to .pdf it will not produce all the images with it
-
Using the Vaio display.
My mother is planning on switching from a windows PC to a mac book pro and she was curious if you she could hook up a Sony Vaio LCD display to the mac book pro. I told her she could, correct me if i'm wrong, after all it's just a display right?
-
Modifying a Class that implements Serializable
I have a class LDAPUser import java.io.*; public class LDAPUser implements java.io.Serializable{ private java.lang.String name; private java.lang.String userID; private java.lang.String associateNumber; public LDAPUser() { super()
-
Printing reports on two printer
Hi I want to print one report on two printers on network.how can I do that.One printer is located on Sales Dept. and other on Accounting Dept.Pls help me in this issue and notify me on my email:[email protected]