No of Records in the Alert

Hi All,
Do we have a limitation on no. of records in Alert .As when i run the query alone it showing all the result but when i attache it with alert its not showing all the data
Edited by: Ankur Gupta on Jul 10, 2009 9:22 AM

Hi.
In version 2005A, the limit was 99 records, so, the limit is still present.
I suggest to create the alert as query in Query Manager, and fix the alert to display records like Top 10 or TOP 100.
Regards.

Similar Messages

Will the informations be recorded in the alert.log file? -----No.168

will the informations about the loss of a temporary file be recorded in the alert.log file?

Yes, because whe your database starts needs to "mount" a tablespace with temporary files (case of tablespace "TEMP"). But don't worry with a loss of this tablespace because doesn't contain nothing when database starts.

How to be notified for all ORA- Errors recorded in the alert.log file

based on Note:405396.1, I Changed the Matches Warning from the default value ORA-0*(600?|7445|4[0-9][0-9][0-9])[^0-9] to ORA-* in order to receive an warning alert for all ORA- errors.
but I just recieved the alert like the following:
Metric=Generic Alert Log Error
Time/Line Number=Mon Feb 25 23:52:21 2008/21234
Timestamp=Feb 26, 2008 12:06:03 AM EST
Severity=Warning
Message=ORA-error stack (1654, 1654, 1654) logged in /opt/oracle/admin/PRD/bdump/alert_PRD.log.
Notification Rule Name=Alert Log Error
Notification Rule Owner=SYSMAN
as you can see, the message only indicate the ORA-1654, nothing else.
How to set in 10g grid control to get the details alert that in the alert log like:
"ORA-1654: unable to extend index ADM.RC_BP_STATUS by 1024 in tablespace PSINDEX"
I can't believe Oracle 10g Grid control only provide the ORA- number without details

Go to your database target.
On the home tab, on the left hand side under Diagnostic Summary, you'll see a clickable date link next to where it says 'Alert Log'. Click on that.
next click on Generic Alert Log Error Monitoring Configuration (its at the bottom)
In the alert thresholds put:
ORA-0*(600?|7445|4[0-9][0-9][0-9])[^0-9]
I believe that will pick anything up but experiment, its only perl.
If you want to test this use the DBMS_System.ksdwrt package but I would advise you only do so on a test database. If you've never heard of it, google it. Its a way of writing to your alert log.
Make sure you have your emails sent to long format as well.

Oracle troubleshooting when I have no info in the alert log

Hello everyone,
I'm running Oracle 10g on Solaris 10. I performed a restore yesterday, and my DB instance was running smoothly. This morning I discovered that Oracle died on me "silently", that is, nothing was recorded in the alert log - the last entry in the alert log was the end of the restore.
No Oracle processes were running anymore on the machine, trying to log in via sqlplus issued the expected
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
The instance is running again after rebooting the machine.
Can I find clues about the crash, as the alert log hasn't anything for me?
Thank you,
Adrian

Thank you all for your ideas.
I looked in the /var/adm/messages (there's also /var/log/sysmsg which might be of some help) and found out that the machine was rebooted. Apparently, the Oracle instance hasn't been started properly afterwards.
The alert log mentions (before the crash) that 'alter database open resetlogs' was performed successfully, and I ran some applications after restore that accessed the DB - the instance was indeed running.
There is no other alert log (my attempts to bring up the DB the next day are recorded in the same file).

Show the alert 'Do you want to save the changes? after entering each record

Hi,
Is there a way to show the alert 'Do you want to save the changes you have made?', after entering each record.
i.e. as soon as a record is entered, user should be prompted to 'Do you want to save the changes?' the record when they move to the next record.
I used the below code in Post-Record rigger. Prompt was diplaying fine as per the requirement,but record was not being saved.
DECLARE
n_button_selection INTEGER;
BEGIN
if :System.Record_Status='INSERT' then
fnd_message.set_string('Do you want to save the changes?');
n_button_selection := fnd_message.question('Yes', 'No','Cancel', 1, 2,'question');
IF n_button_selection = 1 THEN
forms_ddl('commit_FORM');
ELSIF n_button_selection = 2 THEN
RAISE form_trigger_failure;
ELSE
NULL;
END IF;
end if;
END;
I used forms_ddl('commit_FORM') to commit the record. Because we can't us Do-key('commit_form') in post-record trigger. But forms_ddl('commit_FORM') is not working. So can anybody please give some idea regarding this.
--

Forms_ddl issues dynamic sql - you cannot call another builtin (like commit_form) within forms_ddl. Check form_status after the call and you will see that it failed.
Moreover, forms is not able to execute the post and commit process if you issue "forms_ddl('commit');", so this will not be a solution either.
You could use the When-New-Record-Instance - Trigger, which allows restricted built-ins to be executed, and issue do_key('commit_form');". However, you would have to check the :system.block_status or :system.form_status, because :system.record_status will already hold the new record number.
Regards,
Gerd

Is it possible to use that in the Alert????

Dear all,
We have a table XTR_BOND, so i want whenever the user enter any value to get that record by anevent alert(After insert for that table)
so is it possible to use it like that???
select t.bond_issue_code, t.DESCRIPTION
into &bond_issue_code, &DESCRIPTION
from XTR_BOND_ISSUES t
where rowid = :rowid
Kindly help,
Thanks in advance
Regards....Ashraf

BANNER
Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production The stored procedure adds a row to a table. There's a trigger on this table that fires when this occurs. This trigger uses DBMS_SCHEDULER to run a job. This job executes a C executable program on a remote server. When the C program finishes, it updates a field in a table in the database (using OCI driver) indicating the job is complete. The stored procedure needs to see this flag has been set showing the job is complete in order to continue.
In a nutshell, the C program produces a lot of other results, and the stored procedure retrieves these results to send back to the calling java program. Of course, it must wait until the results are ready in the database before retrieving them.
I'm a total newbie here (maybe there's a better way). I'd like to avoid polling if possible, thus my interest in DBMS_ALERT. I haven't been able to find clear, simple, and complete example online. I think often most discussion online give snippets that assume background knowledge.
Edited by: tem on Apr 12, 2012 4:46 PM

Data objects in the alert modeler.

Hi,
in the default alert modeler profile, there are some data objects.
Can we add more data objects to this profile..
As in ... i want to display the campaign information of the business partner in the alert..
also .. i want to display the last interaction record data like ... date.. description of the interaction record ..
How can i achieve this.
Regards
Vandana Gupta

hi vandana
i suppose that u cant add new data object to ur alert modeler,because alert modeler is linked to the meta model and these meta models includes the set of data object which u can use while using a default profile but what u can do is assign new function event as data objects are linked with the events ,that way u can easily incubate ur new data object which u want to use with the alert modeler profile and assign that profile to the IC profile,
for creating new function events u have to do some coding which is very easy ,if u don know u may ask the same in ur time who knows that.
guess it will help
best regards
ashish

Drop database deletes the alert log

Hi DBA's ,
I ran into a strange situation i never faced before.
We have a Oracle database version 11.2.0.3.0.
This is dev db which i had to refresh from production via rman.
After the drop database command finished all the contents of my trace folder dissapered including the alert log.
Has anyone faced this situation before or help me understand what happened

himmy, if you are dropping the database why would you need the old alert.log or any other diagnostic directory files? Ideally if you drop a database there should be no record of it left on the system when the drop completes. Why is this a problem?
If you are refreshing the database from production then instead of dropping the database and creating a new database via rman restore perhaps you should be using either the export/import transportable tablespace feature to move the files or traditional export/import of the data.
HTH -- Mark D Powell --

Error while saving the records in the database

Hi,
I am running into a wierd error.
I have built a new page which contains the information about the employees. Some of the fields are updatable fields. The page shows the details of the person who logs into the page.
I am not using EO in this page. The data is queried from the database from VO and displayed in the page and when the records are updated, they are saved in the databased using pl/sql procedure which is
being called from AM. So i am basically not using VO to save the records in the database.
The error which i am getting is,
If 2 users are trying to update the page at the same time, user A's details are updated in user B's page.
This is really causing the issue. Any help is greatly appreciated.
Thanks in advance.
PK

I have posted the code used along with the dialog page. Please review.
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Pavan, Start1",OAFwkConstants.STATEMENT);
if (pageContext.getParameter("XYZBack")!=null)
pageContext.setForwardURL("OA.jsp?OAFunc=OAHOMEPAGE"// OAWebBeanConstants.RETURN_TO_MENU_URL also tryed this , same error
,null
,OAWebBeanConstants.KEEP_MENU_CONTEXT
,null //not needed as we are retaining menu context
,null // no parameters are needed,true //retain AM,OAWebBeanConstants.ADD_BREAD_CRUMB_YES
,true
,null
,OAWebBeanConstants.IGNORE_MESSAGES);
if(pageContext.getParameter("XYZUpdate") !=null)//The fields and their values are loaded as soon as the update button is clicked. We do this before calling the oadialog page so that the values are not lost
OAViewObject EmpDetailsVO3 = (OAViewObject)OAAppl.findViewObject("XYZPersInfoVO");
OARow EmpDetailsRow3 = (OARow)EmpDetailsVO3.first(); //Bringing the control over to the first row which is nothing but the displayed row.
if(EmpDetailsRow3 !=null)
s_workphone = EmpDetailsRow3.getAttribute("WorkPhone").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"workphone is: "+s_workphone,OAFwkConstants.STATEMENT);
s_fax = EmpDetailsRow3.getAttribute("WorkFax").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Fax is: "+s_fax,OAFwkConstants.STATEMENT);
s_building = EmpDetailsRow3.getAttribute("Building").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Building is: "+s_building,OAFwkConstants.STATEMENT);
s_room = EmpDetailsRow3.getAttribute("Room").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Room is: "+s_room,OAFwkConstants.STATEMENT);
s_box = EmpDetailsRow3.getAttribute("Box").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Box is: "+s_box,OAFwkConstants.STATEMENT);
s_preferedname = EmpDetailsRow3.getAttribute("KnownAs").toString();
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"Preferred name is: "+s_preferedname,OAFwkConstants.STATEMENT);
OAException OAExcep1 = new OAException("PER","XYZ_UPDATE_DETAILS");
OAException OAExcep2 = new OAException("PER","XYZ_UPDATE_MESSAGE");
OADialogPage OADialogPG1 = new OADialogPage(OAException.WARNING,OAExcep1,OAExcep2,
OADialogPG1.setOkButtonToPost(true);
OADialogPG1.setNoButtonToPost(true);
OADialogPG1.setOkButtonLabel("Yes");
OADialogPG1.setNoButtonLabel("No");
OADialogPG1.setOkButtonItemName("DoOk");
OADialogPG1.setNoButtonItemName("DoNo");
OADialogPG1.setPostToCallingPage(true);
pageContext.releaseRootApplicationModule();
pageContext.redirectToDialogPage(OADialogPG1);
else if(pageContext.getParameter("DoOk") != null)
OAApplicationModule EmpDetailsAM = pageContext.getApplicationModule(webBean);
Class[] paramtypes = {String.class, String.class, String.class, String.class,String.class,String.class,String.class};
Serializable[] params = {s_personid,s_workphone,s_fax,s_building,s_room,s_box,s_preferedname};
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"personid is :"+s_personid,OAFwkConstants.STATEMENT);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"workphone is :"+s_workphone,OAFwkConstants.STATEMENT);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"workfax is :"+s_fax,OAFwkConstants.STATEMENT);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"building is :"+s_building,OAFwkConstants.STATEMENT);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"room is :"+s_room,OAFwkConstants.STATEMENT);
if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
pageContext.writeDiagnostics(this,"preferredname is :"+s_preferedname,OAFwkConstants.STATEMENT);
pageContext.releaseRootApplicationModule();
OAAppl.invokeMethod("TransactionCommit",params,paramtypes);
OAAppl.invokeMethod("initDetails");
throw new OAException("The Building and Phone Information have been saved successfully"
,OAException.INFORMATION);
thank you

My ipad was is displaying an alert message " A wi-fi connection is required to download your apps and media". So it has been connected to the internet over night and this morning but is still displaying the alert message and it won't go away. what to do?

Hi,
My name is Norbert. I am having some difficulties restoring my icloud back up. My ipad was doing an icloud back up and the alert message displayed on the ipad after my internet was interrupted "A wi-fi connection is required to download your apps and media".
I got the internet working, my ipad is receiving internet network but the alert message is still displayed on the ipad and won't go away, to make matters worse the ipad is frozen and i can't do anything.
Please can anyone with a similar experience tell me what to do in this situation?
Thank you

Welcome to the Apple Community.
Have you tried a hard restart. Press the on/off button and homescreen buttons together until the device shuts down.

Include URL in the Alert message in Sitescope Alert

Hi,
I am trying to include the URL int he Evetn mapping but unable to fidn the Attribute to include the URL in the alert. Please suggest.

Hi,
If this is a static URL then you can include it in alert by modifing the alert templates under templates.mail in installed directory. In case of dynamic URL's put them under group/monitor description feild nad include it in alert using the tag like "Monitor: <groupID>:<name> <groupDescription>" in alert template.
Regards,
Sujith

Can not delete record from the master block ,frm-40202 field must be entere

hi ,
i have built a form which contain master and details blocks
the problem is
when i try to delete a record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-recoder
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
     :LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
          :LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
     :LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;Edited by: ayadsufyan on May 8, 2013 2:03 PM

If this is a FORMS question you should mark this one ANSWERED and repost your question in the FORMS forum
Forms

HT204088 Hi team can your team send me the purchase record of the game barcode soccer

Hi team
Can your team send me back the purchase record for the game barcode soccer that I purchase under this account thanks

This is a User to User Forum... What do you require and from whom...

Urgent help needed: how to display a list of records on the screen

Hello,
This is very urgent. Can anyone help me. I have posted this query of mine before also but still no reply came. My whole application is dependent on this problem. Actually I am developing an application for mobile phone using MIDP. I have a record store which contains personal details for users. I am able to add records to the record store. Now I want that these records can be edited. For this I want to display a list of firstname field on the screen (and not console) so that i can select a user to edit its details. I have written the code to read the records and individual fields and display it on the console but i want to display that list on screen. I tried list and array but it s giving some error.
I am giving the code to read the records below. Please tell me how can I display it in a list on the screen.
public void readStream(){
try
byte[] recData=new byte[50];
String varname;
ByteArrayInputStream strmBytes = new ByteArrayInputStream(recData);
DataInputStream strmData=new DataInputStream(strmBytes);
if (rsperdt.getNumRecords() > 0){
ComparatorString comp=new ComparatorString();
int i=1;
RecordEnumeration re=rsperdt.enumerateRecords(null, comp, false);
while(re.hasNextElement()){
rsperdt.getRecord(re.nextRecordId(), recData,0);
System.out.println("Record #" + i );
varname = strmData.readUTF();
System.out.println("Name #"+varname);
System.out.println("---------------------------");
i=i+1;
strmBytes.reset();
comp.compareStringClose();
re.destroy();
strmBytes.close();
catch(Exception e){
System.err.println("read Records class:read");
}

I could not understand ur point "post the code in tags". I am pasting the code below. Please help as my whole application is stuck due to this problem and I have a deadline of 7th oct.
This midlet is getting called from some other midlet.
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
import javax.microedition.rms.*;
import java.io.*;
import java.util.*;
public class frmread extends Form implements CommandListener
static final String rec_store="db_per";
private RecordStore rsperdt=null;
private Vector vecname;
private ChoiceGroup chname;
private boolean flagSortByPriority = false, flagShowPriority = true;
private Form fmmain;
private Command cmdBack;
private teledoc midlet;
public frmread(String title, teledoc midlet)
super(title);
this.midlet = midlet;
openRecStore();
this.setCommandListener(this);
     chname = new ChoiceGroup("new", Choice.EXCLUSIVE);
     vecname = new Vector();
     cmdBack = new Command("Back", Command.BACK, 1);
fmmain = new Form("Record Search");
     addCommand(cmdBack);
setCommandListener(this);
readStream();
     rebuildTodoList();
     closeRecStore();
* Process events for this form only
protected void rebuildTodoList()
for(int j=chname.size(); j>0; j--)
     chname.delete(j-1);
     int priority;
     todoitem item;
     String text;
     StringBuffer sb;
     for (int j=0; j<vecname.size(); j++)
          item=(todoitem) vecname.elementAt(j);
          priority = item.getPriority();
          text = item.getText();
          sb = new StringBuffer((flagShowPriority ? (Integer.toString(priority) + "-"): ""));
          sb.append(text);
          chname.append(sb.toString(), null);
public void commandAction(Command c, Displayable s)
if (c == cmdBack){
midlet.displayteledoc();
public void readStream(){
try
byte[] recData=new byte[100];
String varname;
int varname1=0;
     ByteArrayInputStream strmBytes = new ByteArrayInputStream(recData);
     DataInputStream strmData=new DataInputStream(strmBytes);
     if (rsperdt.getNumRecords() > 0){
ComparatorString comp=new ComparatorString();
int i=1;
          int id = 1;
          vecname.removeAllElements();
          RecordEnumeration re=rsperdt.enumerateRecords(null, comp, false);
while(re.hasNextElement()){
     rsperdt.getRecord(re.nextRecordId(), recData,0);
System.out.println("Record #" + i );
varname = strmData.readUTF();
               varname1 = strmData.readInt();
               id = re.nextRecordId();
               System.out.println("Name #"+varname);
               todoitem item = new todoitem(varname1, varname, id);
               vecname.addElement(item);
               System.out.println("---------------------------");
               i=i+1;
strmBytes.reset();
          comp.compareStringClose();
          re.destroy();
strmBytes.close();
catch(Exception e){
System.err.println("read Records class:read");
public void openRecStore(){
try{
rsperdt=RecordStore.openRecordStore("db_per",true);
catch(RecordStoreException e){
db(e.toString());
public void closeRecStore(){
try{
rsperdt.closeRecordStore();
catch(Exception e){
db(e.toString());
public void db(String str){
System.err.println("Msg:" + str);
class ComparatorString implements RecordComparator{
private byte[] recData = new byte[20];
private ByteArrayInputStream strmBytes = null;
private DataInputStream strmDataType = null;
public void compareStringClose(){
try{
if(strmBytes != null)
     strmBytes.close();
if(strmDataType != null)
     strmDataType.close();
     catch (Exception e)
public int compare(byte[] rec1, byte[] rec2)
     String str1, str2;
     try {
          int maxsize = Math.max(rec1.length, rec2.length);
          if (maxsize > recData.length)
          recData = new byte[maxsize];
               strmBytes = new ByteArrayInputStream(rec1);
               strmDataType = new DataInputStream(strmBytes);
               str1=strmDataType.readUTF();
               strmBytes = new ByteArrayInputStream(rec2);
               strmDataType = new DataInputStream(strmBytes);
               str2=strmDataType.readUTF();
               int result=str1.compareTo(str2);
               if (result == 0)
               return RecordComparator.EQUIVALENT;
               else if (result < 0)
               return RecordComparator.PRECEDES;
               else
               return RecordComparator.FOLLOWS;
               catch (Exception e)
               return RecordComparator.EQUIVALENT;

Importing to iMovie: How do I use an external usb mic when recording with the built-in FaceTime HD Camera?

Hello all
I'm scheduled to work with a friend this week; I'm going to help him make a simple audition DVD. I promised him I had the necessary equipment and such.
I was importing from the webcam using iMovie. If I can't use my external mic to record for the video, there is more involved in the editing process. I was hoping to record the video and audio into one package. I'm using the built-in FaceTime webcam on my macbook pro and a ZoomH1 on usb.
I've tried changing the audio in system preferences: input to H1. This works when recording with audacity or anything else. I even changed the input on FaceTime to H1. There aren't any preferences I can find in iMovie to change the input for importing video directly from the webcam.
How do I change the audio input for direct import on iMovie?
OR
Is there something else I can do to have HD video and HQ audio captured in one video file on my macbook pro?
I suppose I can record the video and audio separately but that is usually much more involved. This is why I got this usb microphone lol.
Thanks in advance,
-Seth

I just found using QuickTime Player to record a movie works great. I can easily change the audio input. iMovie is silly. lol
If I missed anything let me know.
Thanks
-Seth

No of Records in the Alert

Similar Messages

Maybe you are looking for