No P4 connection could be established to SID during managed systems setup
Hi,
I get the following error when executing managed systems setup Create Users request.
No P4 connection could be established to BJR
No configuration found for key (BJR/sapj2ee/msgserver/host). DETECTED Self-managing scenario. You need to first adapt the connectivity of Diagnostics Agent used for the Managed system BJR, before you could proceed with this setup. Therefore change the Agent connection type for the BJR relevant Diagnostics Agent to P4 Dispatcher, before you run again this setup. This connection update has to be performed in the Agent Administration under Agent Connectivity. You could access the Agent Administration from the Root Cause Analysis Work Center when logged as Solution Manager Administrator.
I have deleted and manually recreated SM_ADMIN_SOL, SAPSUPPORT and SM_COLL_SOL users, but still get the same issue.
Message server ports etc are correct. Screenshot below.
I have reviewed OSS note 1678469 but not resolved the issue.
Any ideas will be appreciated.
Regards
Tariq
Hi,
As stated please review how do you register dia agent in solution manager, you can check in step 4 assign diagnostic agent in solman_setup.
further review the below doc for dia agent registration via P4 port Diagnostics Agents - SAP Solution Manager Setup - SCN Wiki
Thanks
Jansi
Similar Messages
-
FTPOpen Data Connection: Could not establish connection
I need to transfer data files from a local directory to a remote system via FTP.
I can open an FTP connection, login and list existing files at the remote location. I even tried to rename files at the remote location, it works.
Trying to sen files to the remote location using the FTPPutFile.vi causes an error "FTPOpen Data Connection: Could not establish connection".
Any idea, what causes that error?
Thank you in advance,
Andreas LangerThat's very peculiar that this should be happening, as it obviously sounds as though you have already established a connection. Have you tried running any example VIs? This is usually where I start to debug a problem. It shows me whether my code is wrong or something else (which is hopefully the issue).
I found a good example for you on NI's website which makes a call to both "Get File" and "Put File". It ran successfully for me. You may want to see if it gives you the same errors.
It's currently configured for an FTP server which I use, so you'll want to change its connection, but that's available through the front panel. Let me know how it works for you.
J.R. Allen
Attachments:
ftp[1].vi 36 KB -
NW-Release of Technical System SID of managed system - is unidentifiable!
Hi,
Does anyone encountered this issue before when generating stack file?
I am going to generate the stack file for SAP Enhancement Package 7 for SAP ERP 6.0 and SAP NetWeaver 7.4
but during phase 2.2 it pops up the error "NW-Release of Technical System <SID of managed system>- is unidentifiable!"
I had read through note 1754904, but I could not found any SAP LiveCache under ERP system under SMSY.
Thanks and regards,
Shu JieHi Shu Jie,
Please goto LMDB, then select technical system -> choose your system -> check the software field whether it has updated with the information of NW
if not, please make sure you added the system in SLD and SLD sync with LMDB.
please refer Landscape Management Database (LMDB) – FAQ and Troubleshooting for the LMDB - Managing System Landscape Information - SAP Library
Thanks
Jansi -
Network connection could not established
trying to sync and update says network could not be established
I'm having the same problem with iTunes on my mac. First I get a message saying the network connection couldn't be established, and then I get unknown error -50.
Apple status indicates that it isn't a problem with the iTunes store... http://www.apple.com/support/systemstatus/ -
Hi Supports,
I am using sapinst homogeneous system copy in Linux on sybase.
I stuck on the the step 27/49 "create Database".
I checked Firewall is off.
i got points in my sapinst_dev.log that "
1)The log segment in the target database 'SID' is too small (9216 MB) to accommodate the log segment from the dumped database (10240 MB)"
and
2)"Can't change the owner of the master, model, tempdb or sybsystemprocs database"
Do i need to increase "sybase/SID/saplog_1" ? because my "saplog_1" is 49 mb now.
if it is ! how do i increase in this stage.
can any one know about this error???
Thanks,
Aziz.Hi,
When i seen SID.log file so its showing deadlock and checkpoint occurring,
Is any solution ???
Is this because of networks?
we had 2 servers on this same IP. but i stopped one server and one is still running.
please find my SID.log file and revert back if any soltion.
==========================================================
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.03.21 12:12:31 =~=~=~=~=~=~=~=~=~=~=~=
ibssrv02:/sybase/IB1/ASE-15_0/install #
ibssrv02:/sybase/IB1/ASE-15_0/install # lscd ASE-15_0/install/lscd IB1lscd /IB1sybase/df -hexitsu - sybib1lscd IB1ls
IB1.log IB1_BS.log IB1_JSAGENT.log RUN_IB1 RUN_IB1_BS auditinit setperm_all showserver startserver sybhauser veritas
ibssrv02:/sybase/IB1/ASE-15_0/install # more IB1.log
00:0000:00000:00000:2014/03/21 11:03:36.98 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Checked out license ASE_CORE
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Performing space allocation for device '/sybase/IB1/sybsystem/master.dat' (0.39 Gb). This may take some time.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Finished initialization.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Using config area from primary master device.
00:0000:00000:00000:2014/03/21 11:03:38.32 server Configuration Error: Configuration file, '/sybase/IB1/IB1.cfg', does not exist.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Warning: A configuration file was not specified or the default file '/sybase/IB1/IB1.cfg' does not exist. ASE creates
the default file.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Warning: Using default file '/sybase/IB1/IB1.cfg' since a configuration file was not specified. Specify a configurati
on file name in the RUNSERVER file to avoid this message.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
after configuring enough Huge Pages.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Internal run-time model set for Linux - Native
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Adaptive Server is using the threaded kernel mode.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Using 4096 file descriptors.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun 6
16:08:18 2013
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Confidential property of Sybase, Inc.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Copyright 1987, 2013
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Sybase, Inc. All rights reserved.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Unpublished rights reserved under U.S. c 1702]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1718]: executing SQL statement ("update master.dbo.sysusages set loc..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1719]: executing SQL statement ("update sysattributes set object_inf..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1720]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1730]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1731]: executing SQL statement ("begin declare @val int select @val=..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1740]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'model' does not exist. ASE will create it.
--More--(11%)
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'model': beginning upgrade step [ID 1]: Initialize disk and create empty allocation units on master devi
ce.
00:0006:00000:00001:2014/03/21 11:03:39.79 server Database 'model': beginning upgrade step [ID 2]: Bootstrap basic system catalogs in database.
00:0006:00000:00001:2014/03/21 11:03:39.79 server Database 'model': beginning upgrade step [ID 6]: creating index (table syspartitions, index ncsyspartitions)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 8]: creating index (table systypes, index ncsystypes)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 10]: creating index (table sysobjects, index ncsysobjects)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 13]: creating table (table systabstats)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 26]: creating table (table sysprocedures)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 27]: creating table (table syscomments)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID 28]: creating table (table syssegments)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 29]: creating table (table sysprotects)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 30]: creating table (table sysusers)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 31]: creating table (table sysalternates)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 32]: creating table (table sysdepends)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID 33]: creating table (table syskeys)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 47]: creating table (table syspartitionkeys)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 51]: creating table (table sysreferences)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID 52]: creating table (table sysconstraints)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 53]: creating table (table sysusermessages)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 54]: creating table (table systhresholds)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 55]: creating table (table sysroles)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 56]: creating table (table sysslices)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID 60]: creating table (table sysstatistics)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 61]: creating table (table sysxtypes)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 62]: creating table (table sysjars)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID 65]: creating table (table sysqueryplans)
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 68]: creating table (table sysencryptkeys)
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 73]: executing SQL statement ("update sysobjects set sysstat = sys...
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 74]: executing SQL statement ("update syscolumns set type=66, user...
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID 80]: creating table (table sysattributes)
00:0006:00000:00001:2014/03/21 11:03:39.86 server Database 'model': beginning upgrade step [ID 82]: creating table (table sysdams)
00:0006:00000:00001:2014/03/21 11:03:39.86 server Database 'model': beginning upgrade step [ID 90]: insert basic data into bootstrap system tables
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 91]: executing SQL statement ("update systypes set length=@@maxpag...
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 245]: Update system roles in system tables.
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID 248]: update system catalog protection data
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 606]: executing SQL statement ("select lct_admin('lastchance', db_i...
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1126]: Initialize systabstats with valid statistics
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1131]: Creating/Updating the last chance threshold for logsegment.
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1274]: executing SQL statement ("declare @dummy int")
--More--(13%)
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1241]: executing SQL statement ("insert into sysattributes (class, a...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1400]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1411]: executing SQL statement ("if not exists (select 1 from master...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1416]: executing SQL statement ("update sysroles set id=11 from sysu...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1502]: executing SQL statement ("if exists (select 1 from sysobjects...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1503]: executing SQL statement ("create view sysquerymetrics (uid, g...
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1505]: executing SQL statement ("update sysattributes set char_value...
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1550]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1554]: upgrade simulated statistics
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1564]: executing SQL statement ("declare @dbid int select @dbid = db...
00:0006:00000:00001:2014/03/21 11:03:39.93 server Database 'model': beginning upgrade step [ID 1650]: executing SQL statement ("dbcc upgd_grantrev_sysrole_perms('g...
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1651]: updating builtin permissions
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1652]: adding generic user 'usedb_user' to sysusers
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1653]: updating DBCC command permissions
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1702]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1719]: executing SQL statement ("update sysattributes set object_inf...
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1720]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1730]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1740]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server CREATE DATABASE: allocating 1536 logical pages (24.0 megabytes) on disk 'master' (1536 logical pages requested).
00:0006:00000:00001:2014/03/21 11:03:39.97 server Warning: The database 'sybsystemdb' is using an unsafe virtual device 'master'. The recovery of this database can not
be guaranteed.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Timestamp for database 'sybsystemdb' is (0x0000, 0x000013b4).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database sybsystemdb successfully created.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Recovering database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database 'sybsystemdb', checkpoint=(864, 64), first=(864, 64), last=(864, 150).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database sybsystemdb.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 86.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Redo pass of recovery has processed 2 committed and 0 aborted transactions.
--More--(15%)
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed REDO pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Timestamp for database 'sybsystemdb' is (0x0000, 0x00001416).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Started cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Completed cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Boot Count: 1
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Now loading ASE's new default sort order and character set
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
--More--(17%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
--More--(18%)
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
--More--(20%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
--More--(21%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysdatabases' (object ID 30): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysdatabases_30' (partition ID 30) of table 'sysdatabases'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syslogins' (object ID 33): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syslogins_33' (partition ID 33) of table 'syslogins'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysdevices' (object ID 35): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysdevices_35' (partition ID 35) of table 'sysdevices'. The logical page size of this table is 16
384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysconfigures' (object ID 37): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysconfigures_37' (partition ID 37) of table 'sysconfigures'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysservers' (object ID 40): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysservers_40' (partition ID 40) of table 'sysservers'. The logical page size of this table is 16
384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'sysremotelogins' (object ID 41): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysremotelogins_41' (partition ID 41) of table 'sysremotelogins'. The logical page size of this t
able is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
--More--(23%)
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syscharsets' (object ID 45): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syscharsets_45' (partition ID 45) of table 'syscharsets'. The logical page size of this table is
16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'sysresourcelimits' (object ID 52): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysresourcelimits_52' (partition ID 52) of table 'sysresourcelimits'. The logical page size of th
is table is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Default Sort Order successfully changed.
00:0006:00000:00001:2014/03/21 11:03:40.01 server ASE shutdown after verifying System Indexes.
00:0006:00000:00001:2014/03/21 11:03:40.01 kernel ueshutdown: exiting
00:0000:00000:00000:2014/03/21 11:03:40.01 kernel Main thread performing final shutdown.
00:0000:00000:00000:2014/03/21 11:03:40.06 kernel Blocking call queue shutdown.
00:0000:00000:00000:2014/03/21 11:03:40.21 kernel SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:40.98 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Checked out license ASE_CORE
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Using config area from primary master device.
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
after configuring enough Huge Pages.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Internal run-time model set for Linux - Native
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server is using the threaded kernel mode.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using 4096 file descriptors.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun 6
16:08:18 2013
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Confidential property of Sybase, Inc.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Copyright 1987, 2013
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Sybase, Inc. All rights reserved.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Unpublished rights reserved under U.S. copyright laws.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel This software contains confidential and trade secret information of Sybase,
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Inc. Use, duplication or disclosure of the software and documentation by
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel the U.S. Government is subject to restrictions set forth in a license
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel agreement between the Government and Sybase, Inc. or other written
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel agreement specifying the Government's rights to use the software and any
--More--(24%)
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel applicable FAR provisions, for example, FAR 52.227-19.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using /sybase/IB1 as the 'SYBASE' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using ASE-15_0 as the 'SYBASE_ASE' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE booted on host 'ibssrv02' running Linux release 3.0.13-0.27-default version #1 SMP Wed Feb 15 13:33:49 UTC 2012 (
d73692b).
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using '/sybase/IB1/ASE-15_0/IB1.cfg' for configuration information.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Logging ASE messages in file '/sybase/IB1/ASE-15_0/install/IB1.log'.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Disk Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Network Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Ct-Lib Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Platform TCP network support seems IPv4-only.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE booted with TCP_NODELAY enabled.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Network and device connection limit is 4081.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE - Dynamic Pluggable Component Interface is disabled
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server is running as process id 25438.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Number of blocks left for proc headers: 6920.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Proc header memory allocated 1384 pages for each per engine cache.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Proc header memory allocated 1384 pages for engine 0 local cache
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Using value of 'number of engines at startup' (1) for size of syb_default_pool.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 3, "syb_blocking_pool", type="Run To Completion", with 4 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 2, "syb_system_pool", type="Run To Completion", with 1 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 1, "syb_default_pool", type="Engine (Multiplexed)", with 1 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Aggressive task stealing enabled
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Enabling Linux Native Kernel asynchronous disk I/O strategy.
00:0007:00000:00000:2014/03/21 11:03:41.05 kernel I/O controller 2 (NetController) is running as task 1127909376 on thread 7 (LWP 25453).
00:0008:00000:00000:2014/03/21 11:03:41.05 kernel I/O controller 3 (DiskController) is running as task 1127910096 on thread 8 (LWP 25454).
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Initializing virtual device 0, '/sybase/IB1/sybsystem/master.dat' with dsync 'off'.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Virtual device 0 started using asynchronous i/o.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Loaded default Unilib conversion handle.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Worker Thread Manager is not enabled for use in ASE.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mec
hanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel libsybibmmq - Sybase IBM MQ interface/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/OPT
/Thu Jun 6 12:02:54 2013
00:0000:00000:00000:2014/03/21 11:03:41.08 kernel Loaded encryption provider CSI-2.8M2-linuxamd64-2012/12/27 21:15:59 PST-sybcsi_openssl-OpenSSL 1.0.1b 26 Apr 2012.
00:0000:00000:00000:2014/03/21 11:03:41.08 kernel Begin processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.11 kernel Completed processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.11 kernel Begin processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel Completed processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel Encryption provider initialization succeeded on engine 0.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel SSL Plus v5.2.2 security modules loaded successfully.
--More--(26%)
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel Network and device connection limit is 4081.
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel ASE - Dynamic Pluggable Component Interface is disabled
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel Thread 6 (LWP 25447) of Threadpool syb_default_pool online as engine 0
00:0006:00000:00000:2014/03/21 11:03:41.28 server Active traceflags: 1623
00:0006:00000:00001:2014/03/21 11:03:41.28 kernel libomni1 - Component Integration Services: using 'Sybase Client-Library/15.7/P-EBF21002 SP100/DRV.15.7.0.10/Linux x86
_64/Linux 2.6.18-128.el5 x86_64 Native Threads/BUILD1570-026/64bit/OPT/Wed Mar 20 21:34:36 2013'
00:0006:00000:00001:2014/03/21 11:03:41.28 server Size of the 16K memory pool: 8192 Kb
00:0006:00000:00001:2014/03/21 11:03:41.28 server Opening Master Database ...
00:0006:00000:00001:2014/03/21 11:03:41.29 server Loading ASE's default sort order and character set
00:0006:00000:00001:2014/03/21 11:03:41.29 server Recovering database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started estimating recovery log boundaries for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Database 'master', checkpoint=(1634, 132), first=(1634, 132), last=(1634, 173).
00:0006:00000:00001:2014/03/21 11:03:41.29 server Completed estimating recovery log boundaries for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started ANALYSIS pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Completed ANALYSIS pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database master.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started REDO pass for database 'master'. The total number of log records to process is 42.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Redo pass of recovery has processed 7 committed and 0 aborted transactions.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed REDO pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Timestamp for database 'master' is (0x0000, 0x00006ec9).
00:0006:00000:00001:2014/03/21 11:03:41.30 server Recovery of database 'master' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started recovery checkpoint for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed recovery checkpoint for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started filling free space info for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed filling free space info for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started cleaning up the default data cache for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed cleaning up the default data cache for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Database 'master' is now online.
00:0006:00000:00001:2014/03/21 11:03:41.30 server The transaction log in the database 'master' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:41.37 server server is unnamed
00:0006:00000:00001:2014/03/21 11:03:42.06 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.001'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovering database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'sybsystemdb', checkpoint=(864, 170), first=(864, 170), last=(864, 170).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Log contains all committed transactions until 2014/03/21 11:03:40.01 for database sybsystemdb.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed REDO pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Timestamp for database 'sybsystemdb' is (0x0000, 0x0000142f).
--More--(28%)
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Boot Count: 2
00:0006:00000:00001:2014/03/21 11:03:42.07 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:42.07 server The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Resident Node id: fb18efb51d00
00:0006:00000:00001:2014/03/21 11:03:42.07 server Transaction coordinator initialized.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovering database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started estimating recovery log boundaries for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'model', checkpoint=(864, 59), first=(864, 59), last=(864, 77).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed estimating recovery log boundaries for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started ANALYSIS pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed ANALYSIS pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database model.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started REDO pass for database 'model'. The total number of log records to process is 19.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Redo pass of recovery has processed 4 committed and 0 aborted transactions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed REDO pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Timestamp for database 'model' is (0x0000, 0x000013cb).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovery of database 'model' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started recovery checkpoint for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed recovery checkpoint for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started filling free space info for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed filling free space info for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started cleaning up the default data cache for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed cleaning up the default data cache for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:42.08 server The transaction log in the database 'model' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.08 server Database 'model' is now online.
00:0006:00000:00001:2014/03/21 11:03:42.08 server The logical pagesize of the server is 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.08 server 0 dump conditions detected at boot time
00:0006:00000:00001:2014/03/21 11:03:42.08 server Clearing temporary database 'tempdb'.
00:0006:00000:00001:2014/03/21 11:03:42.09 server Tempdb 2 is added to the list of local temporary databases
00:0006:00000:00001:2014/03/21 11:03:42.09 server Timestamp for database 'tempdb' is (0x0000, 0x000013ce).
00:0006:00000:00001:2014/03/21 11:03:42.10 server The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.10 server Database 'tempdb' is now online.
00:0006:00000:00009:2014/03/21 11:03:42.10 kernel network name ibssrv02, interface IPv4, address 192.168.2.6, type tcp, port 7905, filter NONE
00:0006:00000:00001:2014/03/21 11:03:42.10 server Recovery complete.
--More--(30%)
00:0006:00000:00001:2014/03/21 11:03:42.10 server ASE's default unicode sort order is 'binary'.
00:0006:00000:00001:2014/03/21 11:03:42.10 server ASE's default sort order is:
00:0006:00000:00001:2014/03/21 11:03:42.10 server 'bin_iso_1' (ID = 50)
00:0006:00000:00001:2014/03/21 11:03:42.10 server on top of default character set:
00:0006:00000:00001:2014/03/21 11:03:42.10 server 'iso_1' (ID = 1).
00:0006:00000:00001:2014/03/21 11:03:42.10 server Master device size: 400 megabytes, or 204800 virtual pages. (A virtual page is 2048 bytes.)
00:0006:00000:00001:2014/03/21 11:03:42.10 kernel Warning: Cannot set console to nonblocking mode, switching to blocking mode.
00:0006:00000:00001:2014/03/21 11:03:42.10 kernel Console logging is disabled. This is controlled via the 'enable console logging' configuration parameter.
00:0006:00000:00015:2014/03/21 11:03:54.09 kernel Initializing virtual device 1, '/sybase/IB1/sybsystem/sysprocs.dat' with dsync 'off'.
00:0006:00000:00015:2014/03/21 11:03:54.09 kernel Virtual device 1 started using asynchronous i/o.
00:0006:00000:00015:2014/03/21 11:03:55.01 server Timestamp for database 'sybsystemprocs' is (0x0000, 0x000013ce).
00:0006:00000:00015:2014/03/21 11:03:55.13 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.002'.
00:0006:00000:00015:2014/03/21 11:03:55.13 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:03:55.14 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.003'.
00:0006:00000:00015:2014/03/21 11:03:55.15 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:03:55.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.004'.
00:0006:00000:00015:2014/03/21 11:03:55.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:22.28 server Increase the config parameter 'number of open objects' to avoid descriptor reuse. Reuse may result in performance deg
radation.
00:0006:00000:00015:2014/03/21 11:04:24.34 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.005'.
00:0006:00000:00015:2014/03/21 11:04:24.34 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:04:24.88 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.006'.
00:0006:00000:00015:2014/03/21 11:04:24.88 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:24.89 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.007'.
00:0006:00000:00015:2014/03/21 11:04:24.90 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:04:24.90 kernel Initializing virtual device 2, '/sybase/IB1/sybsystem/sybsysdb.dat' with dsync 'off'.
00:0006:00000:00015:2014/03/21 11:04:24.90 kernel Virtual device 2 started using asynchronous i/o.
00:0006:00000:00015:2014/03/21 11:04:24.95 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.008'.
00:0006:00000:00015:2014/03/21 11:04:24.95 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:25.05 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.009'.
00:0006:00000:00015:2014/03/21 11:04:25.05 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00017:2014/03/21 11:04:27.11 kernel Initializing virtual device 3, '/sybase/IB1/sybtemp/tempdbdev.dat' with dsync 'off'.
00:0006:00000:00017:2014/03/21 11:04:27.11 kernel Virtual device 3 started using asynchronous i/o.
00:0006:00000:00018:2014/03/21 11:04:27.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.010'.
--More--(32%)
00:0006:00000:00018:2014/03/21 11:04:27.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00018:2014/03/21 11:04:27.19 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.011'.
00:0006:00000:00018:2014/03/21 11:04:27.19 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00019:2014/03/21 11:04:28.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.012'.
00:0006:00000:00019:2014/03/21 11:04:28.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00019:2014/03/21 11:04:28.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.013'.
00:0006:00000:00019:2014/03/21 11:04:28.18 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00020:2014/03/21 11:04:29.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.014'.
00:0006:00000:00020:2014/03/21 11:04:29.17 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00020:2014/03/21 11:04:29.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.015'.
00:0006:00000:00020:2014/03/21 11:04:29.19 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00021:2014/03/21 11:04:30.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.016'.
00:0006:00000:00021:2014/03/21 11:04:30.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00021:2014/03/21 11:04:30.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.017'.
00:0006:00000:00021:2014/03/21 11:04:30.18 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00017:2014/03/21 11:04:31.15 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.018'.
00:0006:00000:00017:2014/03/21 11:04:31.15 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00017:2014/03/21 11:04:31.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.019'.
00:0006:00000:00017:2014/03/21 11:04:31.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00025:2014/03/21 11:04:35.24 server Shutdown started by user 'sa'. SQL text: shutdown
00:0006:00000:00025:2014/03/21 11:04:35.25 server ASE shutdown by request.
00:0006:00000:00025:2014/03/21 11:04:35.25 kernel ueshutdown: exiting
00:0000:00000:00000:2014/03/21 11:04:35.25 kernel Main thread performing final shutdown.
00:0000:00000:00000:2014/03/21 11:04:35.30 kernel Blocking call queue shutdown.
00:0000:00000:00000:2014/03/21 11:04:35.45 kernel SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:04:36.50 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE -
Connecting a USB input of a Battery Management system sending CAN messages to Labview
I am new in working in Labview..... some guidance will be highly appreciated. ....
I have a Battery management system. It sends CAN signals via a USB interface. I need to control the Battery management system using Labview. So how do i read the CAN signals coming from usb in labview. I am not using a Data acquisition system of NI as my signals are already digital.Hey marco
The device has an application which is runs it. So this application runs the battery management system. What i need to do is to develop a LABVIEW substitute for this application, so that I will be able to communicate with the BMS using LABVIEW, instead of the application provided with it. -
Ftp error Could not establish connection
hello there,
I am trying to connect to ftp server to get a file from it.
I used the "FTP get file.vi"
here a screenshot showing the front panel and the block diagram:
on the left there is filezilla showing that the ftp server is connected just fine and the remote path showing the files which I want to get one of them "log.txt"
I filled the same info into my labview vi .. and when I hit run this error pops up
Error 0 occurred at FTPOpen Data Connection: Could not establish connection
Possible reason(s):
LabVIEW: Error connecting to GPIB driver or device.
=========================
VISA: (Hex 0x0) Operation completed successfully.
I don't know what wrong am I doing... any ideas?
Thanks!
Solved!
Go to Solution.Thanks for your reply.. I solved the problem 1 minute ago .. turned the data connection from active to passive by using false in active terminal..
another error pops up that I need to put the same file type as the file I am asking to get .. I made the local path g:\file.txt and it workd just fine ...
Thanks,, -
How to change the SID during system copy
This blog /people/johannes.heinrich/blog/2006/07/07/new-features-in-db2-udb-v9--part-3 (i.e. the "new feature of V9" in this group) only
talk about the system copy without changing the SID.
In reality, we often want to change the SID during the system copy. Can we modify the script mentioned in above blog
to make SID change possible?
Thanks!Hi Christy,
if you´re using export/import which is prefered you can change the sid during the parameter setting for export and import. You´ll be asked by the old sid and the new sid. For the tablespace names it is not so important because db2 is using tablespace id not the name for the internal administration.
Regards
Olaf -
We are getting error message "Wily BC patch /usr/sap/<SID>/JC06 is not a directory while doing managed systems setup. System verification is successful. The Java directory should be /usr/sap/<SID>/J06 in our case, which is showing correctly in LMDB. Any idea?
I have done the usual resynch SLD, Rerun system verification and reset managed systems configuration etc.Hi Tariq,
Please enter complete path like below and check :
/usr/sap/<ManagedSID>/<InstanceID>/ByteCodeAdapter
Also check below SAP note for details :
1943583 - Wily Agent Directory files are Missing after Network loss - Solution manager 7.1
Hope this helps.
Thanks & Regards,
Nisha -
I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCMHi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM -
Network adapter could not establish a connect from external server
hi,
I've set up a jdbc thin driver properly using
the following input:
"jdbc:oracle:thin:@ipaddress:1521:DBname",
"username", "password"
When outside users try to connect externally (outside the network) there is a different ipaddress. Although they are able to ping,
telnet, run jsp etc... using the external address, they get the following error when they try the thin driver connection:
i/o exception: network adapter could not establish a connection
They change the ipaddress in the connection string to match the external ip. We are using oracle 8i, JRun on Linux. I have a feeling it has something to do with the tnsnames.ora file but I can't be sure.
Any ideas?
Thanks in advance!this is expected behavior ...
the jdbc thin driver requires the use of an ip address that the calling program has acces to ...
internally you have one ip address exposed.
apparently you have another ip address set up for the external customer.
fyi
jdbc thin driver don'ts use the tnsnames.ora file -- they use "host:port:sid" because they are required to be platform independent and not access local datafiles or environment variables on the execution platform.
jdbc oci drivers do use tnsnames.ora which provides the host:port:sid info in their entries. -
Status Failure -lo exception:network adapter could not establish connection
Hi, installed SQL DEVELOPER today and its driving me mad... I am getting this error
Status Failure -lo exception:network adapter could not establish connection.
Basic tab I have all the right information, tried test gives same error...
hostname ajas
port 1521
sid altaf
TNS
Network alias altaf
connect identifier altaf(TRIED SINCE NETW ALIAS DIDNT WORK)
went to TNS tab and from the list selected the right entry for NETWORK ALIAS,tried test still same error... tested with connect identifier still same error...went to Advanced entered this string jdbc:oracle:thin:@ajas:1521:altaf ..... still same error...what the hell is wrong...here is the tnsnames.ora entry ...
ALTAF =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = AJAS)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = altaf)
by the way I am able to connect with sql*plus ... lsnrctl gives the lsnr so thats running... tnslsnr is also running...also installed the latest java sdk i.e 1.5... i have set new path to point to this new java.exe i.e 1.5 one... this is really crazy and havent see such probs in any tools i have ever used and that too using it in normal pc ... God knows what will happen if used for remote db's....
here is listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = AJAS)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = altaf)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = altaf)
no one seems to have answer for this... there are all kinds of strange replies for this problem.... anyone has solved this prob plz reply....
Message was edited by:
ajashadiI've had the same problem when I installed the latest version of SQL developer (1.2.1.32.13) on a machine that still had an older, working version. My problem went away when I changed from an IP name to an IP address. on the connection setup window.
-
Network adapter could not establish the connection
Hi,
Iam new to using Oracle please help me in this problem. Iam trying to connect oracle8i in my home pc(win 98) in java.. I have said..
String url="jdbc:oracle:thin:@testhost:1521:sid";
DriverManager.getConnection(url,"scott","tiger");
Actually i have added the service name using Oracle Net 8 Assistant ... it asked me service name so i gaved "fobjects". then host and port number then i gave "testhost" and port number as 1521. then i tried to use the test service but i couldnt get it... it gaved me error called " ORA12545- Connect failed because target host or obejct doe not exist ..Even then i pressed finished button to accomplish the thing...ans when i executed the java program with the above service name setup it said SO Excpetion : Network adapter could not establish the connection.
Well What the wrong i have done, help me...
Regards
Lensi.hi,
I think you have to register the driver first. pls try the following program...
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
* This class tests the environment to check if JDBC is configured and
* connection to database is possible thru JDBC. Uses THIN driver to connect.
public class JDBCCheck {
public JDBCCheck() { }
private Connection conn = null;
private final int NO_DRIVER = 1;
private final int INVALID_URL = 17002;
private final int INVALID_CREDENTIALS = 1017;
private final int NULL_URL = 2;
private final int DATABASE_DOWN = 1034;
public static void main(String[] args) {
JDBCCheck check = new JDBCCheck();
check.dbconnect();
public void dbconnect() {
if(loadDriver())
if(connect())
doSomething();
public boolean loadDriver() {
boolean loadeddriver = false;
String jdbcDriver = System.getProperty("jdbc.driver.class");
// Use Oracle driver if nothing is set
if(jdbcDriver == null) jdbcDriver = "oracle.jdbc.driver.OracleDriver";
log("Loading JDBC Driver : class="+jdbcDriver+" ...");
// try to load driver
try {
Class.forName(jdbcDriver);
log("Loaded JDBC Driver ");
loadeddriver = true;
} catch (ClassNotFoundException noclassEx) {
error(NO_DRIVER,noclassEx);
return loadeddriver;
public boolean connect() {
boolean connected = false;
String jdbcURL = System.getProperty("jdbc.url");
String username = System.getProperty("jdbc.username");
String password = System.getProperty("jdbc.password");
if(username == null || password== null) {
username = "scott";
password = "tiger";
if(jdbcURL == null) error(NULL_URL,new Exception(" jdbc.url cannot be null "));
log("Connecting with URL="+jdbcURL+" as "+username+"/"+password);
try {
conn = DriverManager.getConnection(jdbcURL,username,password);
log("Connected to Database");
connected = true;
} catch (SQLException sqlEx) {
error(sqlEx.getErrorCode(),sqlEx);
return connected;
public void doSomething() {
Statement stmt = null;
ResultSet rset = null;
try {
stmt = conn.createStatement();
log("Created Statement object");
rset = stmt.executeQuery(" SELECT 'PASSED' FROM Dual ");
log("Retrieved ResultSet object");
if(rset.next())
log("Connection :"+rset.getString(1));
} catch (SQLException sqlEx) {
} finally {
try {
log("Closing Statment & ResultSet Objects");
if (rset != null) rset.close();
if (stmt != null) stmt.close();
if (conn != null) {
log("Disconnecting...");
conn.close();
log("Disconnected from Database");
} catch (Exception e) { }
public void log(String logMsg) {
System.out.println("Log: "+logMsg);
public void error(int errcode, Exception ex) {
String jversion = System.getProperty("java.version").substring(0,3);
String os = System.getProperty("os.name");
String excp = ex.toString();
// Driver not found in classpath
if(errcode == NO_DRIVER) {
String jarname = "classes12.jar";
String nlsjarname = "nls_charset12.jar";
if(jversion.equals("1.1")) {
jarname = "classes111.jar";
nlsjarname = "nls_charset11.jar";
else if(jversion.equals("1.4"))
jarname = "ojdbc14.jar";
System.out.println(" Error: JDBC Drivers not present in CLASSPATH ");
System.out.println("\n Your CLASSPATH is :"+System.getProperty("java.class.path"));
System.out.println("\n To add Oracle JDBC Drivers to CLASSPATH ");
// Windows
if(os.indexOf("Windows") != -1) {
System.out.println(" >set CLASSPATH=<path-to-"+jarname+">;<path-to-"+
nlsjarname+">;%CLASSPATH%;");
} else {
System.out.println(" $CLASSPATH=<path-to-"+jarname+">:<path-to-"+
nlsjarname+">:$CLASSPATH:");
System.out.println(" $export CLASSPATH");
System.out.println(" Oracle JDBC Drivers can be found in "+
"<ORACLE_HOME>/jdbc/lib directory or "+
"downloaded from http://otn.oracle.com/software/");
} else if (errcode == NULL_URL) {
System.out.println("Error: jdbc.url was not supplied");
System.out.println("Usage: java -Djdbc.url=jdbc:oracle:thin:@<hostname>:<port>:<db_sid> JDBCCheck ");
} else if (errcode == INVALID_URL) {
// Check if Invalid Database SID
if( excp.indexOf("ERR=12505") != -1)
System.out.println("Error: Invalid Database SID was specified in jdbc.url ");
System.out.println("Error: Invalid JDBC URL or DB Listener is down, refer to http://myjdbc.tripod.com/basic/jdbcurl.html ");
} else if (errcode == INVALID_CREDENTIALS) {
System.out.println("Error: Invalid username/password was specified ");
System.out.println("Try connecting to the database thru SQL Plus using the same username/password");
} else if (errcode == DATABASE_DOWN ) {
System.out.println("Error: The Database you are tying to Connect is down ");
System.out.println(" Start the Database and then try to connect ");
} else {
System.out.println("Error code not handled : "+errcode);
System.out.println("\nException Message :"+excp);
System.exit(0);
while running thig pgm, you should pass the driver URL..
java -Djdbc.url=jdbc:oracle:thin:@<hostname>:<port>:<db_sid> JDBCCheck -
Jdbc. The Network Adapter could not establish the connection. Help Please!!
I've found several responses over this issue, but none works for me.
I'm trying to setup a simple jdbc connection from a simple program.
Platform:
Fedora Core 4 (FC4) on AMD 64 bits
Java 1.4.2_04 (64 bits)
ORacle 10g or Oracle 9.2.0.4 (none works);
Tips:
- I can't connect to a remote server, nor to a local server
- I can connect using SQLplus
- TNSPing works fine
- Listener it's up
- my connection string is jdbc:oracle:thin:user/name@host:port:sid
- Also try jdbc:oracle:thin:user/name@//host:port/sid
- I'v tryied with classes12.jar, odbj14.jar
- my hostname it's ok.
I've monitored ip traffic on remote computer. While using TNSPING I detect activity. While using jdbc, no.
Please, any idea??Thanks for your reply.
To your questions:
- I´v tried both IP, host, and even host.domain
- I can connect from remote workstation using toad, and from local using sqlplus.
- I can´t connect via jdbc.
Folowing:
A) my sample code
B) the stack trace
C) the listener status (from my 9i server. Also tryied another servr with 10g)
when I call this program, I´ve tried severl connection strings:
jdbc:oracle:thin:user/pass@sdd51:1521:ebf
jdbc:oracle:thin:user/pass@:sdd51.sdd.com.ar:1521:ebf
jdbc:oracle:thin:user/pass@:10.10.10.51:1521:ebf
also try the other sintax:
jdbc:oracle:thin:user/pass@//sdd51:1521/ebf
In the classpath, I´tryied:
clasess12.jar
ojdbc14.jar
nls_charset12.jar
thanks
A)=================================================
// Import the JDBC classes
import java.sql.*;
import oracle.jdbc.pool.OracleDataSource;
import java.io.*;
import java.util.*;
public class test
// The query we will execute
static final String query = "select 'Hello JDBC: ' || sysdate from dual";
// The connection to the database
static Connection conn;
// Create the User Interface
static public void main (String args[])
try {
String connect_string = args[0];
// See if we need to open the connection to the database
if (conn == null)
// Create a OracleDataSource instance and set URL
OracleDataSource ods = new OracleDataSource();
ods.setURL(connect_string);
// Connect to the databse
System.out.println ("Connecting to " + connect_string + "\n");
conn = ods.getConnection ();
System.out.println ("Connected\n");
// Create a statement
Statement stmt = conn.createStatement ();
// Execute the query
System.out.println ("Executing query " + query + "\n");
ResultSet rset = stmt.executeQuery (query);
// Dump the result
while (rset.next ())
System.out.println (rset.getString (1) + "\n");
// We're done
System.out.println ("done.\n");
catch (Exception e)
e.printStackTrace();
// Oops
System.out.println (e.getMessage () + "\n");
B)=================================================
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:114)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:156)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:212)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:251)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:224)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:102)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:85)
at test.main(test.java:66)
C)=================================================
LSNRCTL for Linux: Version 9.2.0.1.0 - Production on 30-JAN-2006 17:39:59
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 9.2.0.1.0 - Production
Start Date 24-JAN-2006 11:16:18
Uptime 6 days 6 hr. 23 min. 40 sec
Trace Level off
Security OFF
SNMP OFF
Listener Log File /opt/oracle/product/9.2.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sdd51.sdd.com.ar)(PORT=1521)))
Services Summary...
Service "ebf" has 1 instance(s).
Instance "ebf", status READY, has 1 handler(s) for this service...
The command completed successfully -
Hi, I'm running the following setup:
Mac OS X 10.8.4
Virtual Box 4.2.16 r86992
Oracle Developer Days (don't know the version, just downloaded it)
SQL Developer 3.2.20.09
Networking is host-only, I tried bridged but that doesn't make a difference for the problem at hand. I can ping my virtual box just fine, telnet to port 1521 looks good too:
$ ping 192.168.56.101
PING 192.168.56.101 (192.168.56.101): 56 data bytes
64 bytes from 192.168.56.101: icmp_seq=0 ttl=64 time=0.449 ms
^C
--- 192.168.56.101 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.449/0.449/0.449/0.000 ms
$ telnet 192.168.56.101 1521
Trying 192.168.56.101...
Connected to 192.168.56.101.
Escape character is '^]'.
asdf
asdf
Connection closed by foreign host.
When I create a new connection with sql developer, with the same hostname / IP (192.168.56.101), Port 1521 (didn't change that) and SID orcl, basic connection type, it can't even connect, throwing the error mentioned in the subject:
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
I have looked at various threads in the forums here but I'm still stymied why the connection seems to be ok, yet sql developer has problems with it. If I create an ssh tunnel so sql developer only has to connect to localhost it works:
ssh -L 1521:192.168.56.101:1521 -l oracle 192.168.56.101
Message was edited by: 2a2e67cd-b5b2-4229-9fa6-21f5dfe0760dHi Ali,
This may be of varoius reasons..
Is the database that you are connecting on the same PC?
You have specified Hostname: localhost.
If not please replace it with the IP of that server.
Else please check whether the database listener is started or not. if not please start the listener.
Check the SID by tnsping command.
Hope this will help you..
Thanks
Ashok
Maybe you are looking for
-
I have tried to save my PDF settings after editing them, but when I go to "Print" to PDF and check the settings I keep getting Standard default settings. There is no Adobe PDF listed as a file heading to change conversion settings on my Word screen.
-
InDesign equivalent of LiveCycle's "Image Field" in PDF form creation?
LiveCycle has a PDF form field called "Image Field". We add this field to the PDF files we create so that our end users can select and import a JPEG image into their PDF document using Adobe Reader. Now we would like to use InDesign to produce the sa
-
How do I set links to open in Chrome instead of Safari
I find that using Chrome as my browser things work better. However, if someone sends me a link it always opens in Safari can anyone tell me how to make Chrome my default browser
-
I work for a library in Michigan and I am using Kaspersky Security Center to Distribute Software/Updates for our network. I have a distribution license agreement with Adobe to distribute Air, Flash, Reader, Shockwave Flash. I am able to silently inst
-
My iphone has the wrong apple id
My iphone says i have updates but when i go to update them, they have the wrong apple id. how do i change the apple id's?