No persistent reference could be generated for object 'PAYLOAD'

Hi,
I'm using a multimapping inside BPM mapping 2 messages into one message and it fails for some reason but when I try to have a look at the BPM workflow, I cannot see the 'PAYLOAD' in the MESSAGES_IN and MESSAGES_OUT properties of the container. However the HEADER of the incoming message and outgoing message is visible.When I try to see the payload it says 'No persistent reference could be generated for object 'PAYLOAD''.
The mapping gets executed without any issues via BPM or when we test it manually in interface mapping.This is the case with all other BPM's too so it more looks like some property which has to be set in PI to make the payload visible.
Thanks & Regards,
Harish.

Guys,
Can somebody help me ?
The main reason behind why I am trying to see the payload inside BPM is
that I am using a multimapping where I send two requests (input 1:one
with parameters/values to be replaced and second one(input2) has the
actual payload where replacement should happen) and output should be
the second message with values replaced.I am using a java mapping and
when I test it standalone it works whereas inside the BPM I get the
output same as the input2 i.e the replacement doesn't happen.
I am trying to see how the BPM is merging the two inputs to the
multimap which is stopping the java map to work as expected.
I guess something is wrong with the namepsaces as the input2 is the result of a webservice call and carries namespaces like pns, rpl etc.

Similar Messages

Could not generate stub objects for web service invocation in ColdFusion

I was able to call the services on the development box - windows server without any problem at all, everything was working fine but the moment i uploaded to a linux box production server I get this error. "Could not generate stub objects for web service invocation in ColdFusion"
What could be the cause of this problem, i have googled a lot but no solution yet any ideas.

Let me make it simple:
1. Server A is our development server.- hosted inhouse with coldfusion installed.
2. Server B is our production server - a linux server with coldfusion installed hosted on the internet
3. Server C is a third party server containing the webservice - this is a windows server with .net
coldfusion is installed on Server A, the code works here and can connect to server C without any problem. It gets the required respone
but when the code was uploaded to server c it gives the error when we run it.
now i tried just a simple code which works fine on server A below:
<cfinvoke webservice="http://www.webservicex.net/CurrencyConvertor.asmx?WSDL" method="ConversionRate" returnvariable="ConversionRateResult">
    <cfinvokeargument name="FromCurrency" value="EUR" />
    <cfinvokeargument name="ToCurrency" value="USD" />
</cfinvoke>
<cfdump var="#ConversionRateResult#" />
But when i uploaded it to server C: it returns the error
Cannot generate stub objects for web service invocation.
Name: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. WSDL: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL. java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory) It is recommended that you use a web browser to retrieve and examine the requested WSDL document to ensure it is correct. If the requested WSDL document cannot be retrieved or is dynamically generated, it is likely that the target web service has programming errors.
The error occurred in /home/works/public_html/currency.cfm: line 7
5 :     <cfinvokeargument name="FromCurrency" value="EUR" />
6 :
7 :     <cfinvokeargument name="ToCurrency" value="USD" />
8 :
9 : </cfinvoke>
Now if you try the preceeding code on a windows environment it works fine but the moment you put in the in the linux environment it generates this error
I feel that the error may actually be :
java.io.FileNotFoundException: /opt/coldfusion8/stubs/WS728929035/NET/webserviceX/www/Currency.java (No such file or directory)
but i am clueless as to what to do next
Ok so I tried the wget command on the linux
this is what i got
-bash-3.2# wget http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
--2011-07-02 23:23:42-- http://www.webservicesx.net/CurrencyConvertor.asmx?WDSL
Resolving www.webservicesx.net... 216.8.179.25
Connecting to www.webservicesx.net|216.8.179.25|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2011-07-02 23:23:43 ERROR 403: Forbidden.

Could not generate stub object - The element type "META" must be terminated by the matching end-tag "".

I am getting the following error message when I try invoking
a webservice.
Could not generate stub objects for web service invocation.
Name: ProgrammePrivilege. WSDL:
https://clientaccweb.reseaudistinction.com/CardHolderInfo.asmx?WSDL.
org.xml.sax.SAXException: Fatal Error: URI=null Line=11: The
element type "META" must be terminated by the matching end-tag "".
It is recommended that you use a web browser to retrieve and
examine the requested WSDL document for correctness. If the
requested WSDL document can't be retrieved or it is dynamically
generated, it is likely that the target web service has programming
errors.
The problem is, the webservice is working fine, the
application was working yesterday, the error message just appears
after a couple of days and I have to refresh the service in the CF
Administrator. Once I refresh it, everything starts working again.
Anyone else got this problem? ANY help would be appreciated!
If you guys need my code anyway, I can attach it but like I
said, everything works for a couple of days, then, out of the blue,
it stops working so I doubt that it's my CFINVOKE that's the
problem...

Similar kind of problems here - reported back to Adobe a
couple of months ago, so let's wait and hope for the best. My
problems have related to registering multiple web services and
executing them. One problem is that, If I register two identical
(and quite complex) web services, I can only execute either of
them. After CF restart, either of them works, but invoking the
other doesn't work.
For example; CF_Restart -> Try A first, A works -> B
doesn't. Also, CF_Restart -> Try B first, B works -> A
doesn't.
CFMX7.0.2, Apache 2.2, WinXP

SCB indicator is missing or is not valid-No DME could be generated for the

Hi All,
Using transacttion F110,
vendor payments were generated. Payment run successful.
In 'Display Payment Run log',
Warning: Check whether a duplicate payment medium has been created
SCB indicator is missing or is not valid
No DME could be generated for the following documents
CoCd Payment document/Payment order
0100 2000199545
>
> Overview of the files generated (DME)
> Name / File name
> DME file (TemSe) - bank BK03 / DTA111128154701_3215
>> Error log / LISTFS / 0000093865
I have checked the document has SCB number stored.
please suggest.
Thanks and Regards
Reena

Hi Reena,
The error you have mentioned in the initial description is the error code F0265.
Regarding the error code F0265, this arises because the payment medium programs RFFO* look for the field bseg-landl and bseg-lzbzk to be filled.
These fields are necessary for Germany as the f1-help states and if they are missing, you receive these error messages f0265. Please have a look at note 23562 as well for more information.
Sometimes users forget to enter SCB indicator in the invoice document and thus it results in problem reported error messages
at the time of creating payment medium.
In this case either you can make the SCB indicator field "required" in the field status or create a validation rule for those invoices for which SCB indicator should be entered.
To derive SCB indicator automatically I think substitution rule could be of help too as a workaround.
Hope this helps.
Kind Regards
Soumya

No DME could be generated for the following documents

Dear Consultants,
Transaction code F110. DME file is generated for all vendors except 2 vendors. Invoices got cleared.
One vendor is from Austria and other is UK.
No DME could be generated for the following documents
Error:
Supplying country's country key is missing or is not valid
SCB indicator is missing or is not valid.
Could you please let me know where do these setting to be made.
Thanks & Regards,
SK

Dear Friends,
I have solved my issue myself and thought of sharing with you. In field status group - foreign Payment there is a field SCB/Country Key.
It was suppressed earlier. I made this as optional. When we are postings invoices, once the fileds are filled in . DME file generated.
Regards,
SK

Intermittent Could not generate stub objects for web service invocation errors

Hi,
I'm hoping someone can point me in the right direction...We are running Coldfusion 8 and keep getting the stub objects errors intermittently. The web service will work for a while then it will just stop working for while, then it will start back working again. There doesn't seem to be any rhyme or reason to it, and we're not doing anything to the server in the meantime. I don't even know how to begin to diagnose the problem. Has anyone ever seen this or have any ideas of some things we can check?
Thanks!
Holli

It's a load-balanced environment and we've turned the bad server off for now. Also, I was wrong. We're running CF7. I'm getting my environments mixed up. Sorry about that. You can still get to the service on the good server though. This is the link: http://www.asthmaagents.com/services/init.cfc?WSDL After I posted this, we were able to get a little more info. When I went directly to the service using that link, we got this error message off and on when we would refresh the browser:
AXIS error
Sorry, something seems to have gone wrong... here are the details:
Fault - Error attempting to create Java skeleton for CFC web service; nested exception is:
    coldfusion.xml.rpc.CFCInvocationException: [java.lang.NoClassDefFoundError : cfinit2ecfc338058839$funcRECORDSESSION]
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode:
faultString: Error attempting to create Java skeleton for CFC web service; nested exception is:
    coldfusion.xml.rpc.CFCInvocationException: [java.lang.NoClassDefFoundError : cfinit2ecfc338058839$funcRECORDSESSION]
faultActor:
faultNode:
faultDetail:
    {http://xml.apache.org/axis/}hostname:corpinternet1g
Still, nothing is consistent and it's working fine on the other server. I'm at a loss. I really appreciate you taking a look at this! Any info will be helpful.
Thanks!
Holli

Could not generate stub objects for web service invocation

HELP:!!!!!!!!!! Adobe- My client is ready to move to another
technology if this simple solution cannot work!
I am having a hard time invoking the ws below in a
Unix/CF7/Apache 2.0 environment. I can query the WSDL and it works
successful in a windows dev environ. However when going to UNIX it
is unsuccessful. I am thinking that it is a permissions issue or
something. Further more I cannot even register other Webservices in
the CF admin ( eg bable fish) Why? Has anyone come up with a
solution? Thanks in advance for any help.
My PAGE
<cfinvoke webservice="
http://120.252.201.51:8200/test.cfc?wsdl"
method="getXML" returnvariable="foo">
<cfinvokeargument name="XMLInput" value="Hello THere">
</cfinvoke>
<br><cfoutput>#foo#</cfoutput>
MY WS:
<cfcomponent output="Yes">
<cffunction name="getXML" returnType="string"
access="remote" output="Yes">
<cfargument name="XMLInput" type="string" >
<cfoutput>#XMLInput#</cfoutput>
<cfreturn #XMLInput#>
</cffunction>
</cfcomponent>

Does the following version do any better?
My PAGE
<cfinvoke
webservice="
http://120.252.201.51:8200/test.cfc?wsdl"
method="getXML"
XMLInput="Hello THere"
returnvariable="foo"
username="user name"
password = "password"
timeout = "30" />
MY WS
<cfcomponent>
<cffunction name="getXML" returnType="string"
access="remote">
<cfargument name="XMLInput" type="string" >
<cfreturn Arguments.XMLInput>
</cffunction>
</cfcomponent>

Can i use references to trigger events for objects?

Hi,
I have about thirty front panel buttopn controls on my user interface. They are all very spread out so I cannot put them all into a cluster. I have created a reference for each one and put them into an array. Each one of the buttons when pressed I want to trigger the exact same event on an event structure, but dont want to have to create 30 duplicate event cases for each button? any ideas how I can group them so that they trigger the same case?
regards

Mike is right, the label of the event is taken from the label of the wire, typecasting this gives you the ability to rename.
Here's the code for anyone interested:
Ton
Message Edited by TonP on 08-26-2008 05:48 PM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
An error occurred while generating report:
Object reference not set to an instance of an object.
Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
those circumstances.
I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

> Since I have to go through Edit to see the settings, and peruse the
> entire massive folder of settings to try to identify the bad one, it has
> been slow-going and I haven't found it yet.
You can filter ADM templates to show configured ones only, and you can
use the "show all settings" node. This will speed the work up - a little
bit at least :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

Hello,
As you can tell from the title of this question, I am no expert with GPO's. Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb". While
I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already. That is not necessarily my case and I would ask for a
little patience and a bit of 'hand-holding' for what I need.
I run SBS 2011, and in Group Policy Management I have a custom GPO. In this GPO I define all my settings. I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings. This
policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03. That may be the issue, but before making any changes I am seeking expert advice.
When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified. I see that my option for the location is set to "Default"
which by my guessing would be located in the C:\Windows\sysvol directory. Below is what I see there:
C:\Windows\sysvol\domain
C:\Windows\sysvol\staging
C:\Windows\sysvol\staging areas
C:\Windows\sysvol\sysvol
I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry. I searched my server for
that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
If I am correct with my assumption and basic knowledge, I should move all objects as follows:
-Move FROM: C:\Windows\sysvol\domain\policies
-Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether.
Thank you for anyone's help and time with assisting me with this request.
John Fester

> top "Settings" I see the error: "An error occurred while generating
> report: Object reference not set to an instance of an object."
That's due to a security setting (most possibly) your current OS does
not understand. Hard to find out wich exact setting it is... To resolve
this issue, we need the gtpptmpl.inf file residing in the policiy's
sysvol folder. To open this folder, edit the policy, move to computer
settings - policies - windows settings - scripts - startup, press "show
files". Then move two folders upwards and back down to
.\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
its contents and we'll have a look at it.
> location, which I speculate is: C:\Windows\sysvol\domain\policies (which
> folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
> all objects as follows:
> -Move FROM: C:\Windows\sysvol\domain\policies
> -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT - Active Directory Security Group Discovery Agent reported warnings for 524 object(s). DDRs were generated for 0 object(s) that had warning(s) while reading non-critical properties.

Hi, can anyone help me troubleshoot the following please:
Active Directory Security Group Discovery Agent reported warnings for 524 object(s). DDRs were generated for 0 object(s) that had warning(s) while reading non-critical properties. DDRs were not generated for 524 object(s) that had warnings while reading
critical properties.
Possible cause: OU name or Security Group name may contain at least a Unicode character which has conversion problem between Unicode and your system ANSI locale(e.g. Korean characters in English System Locale). The site server might not have access to
some properties of this object. The container specified might not have the properties available.
Solution: Please verify the Active Directory schema for properties that are not replicated or locked. Refer to the discovery logs for more information.
Does the error relate to 524 security groups? There are several invalid search paths listed in adsgdis.log, are these related?
Thanks,
Dale

You'll have to examine the log to determine exactly which objects its referring to. Although this is in the context of group discovery, group discovery still creates DDRs for computer objects within those groups so it could be either groups or computers.
This is not a search path issue though as it's clear that the discovery process found 524 different objects, but as stated, it could not properly read criticial properties of those objects and thus did not create DDRs for them.
As mentioned, reading the log in detail will list the objects individually and the reason it could not create a DDR for it.
Jason | http://blog.configmgrftw.com

AMF3 references - do they reset for each serialized object?

I have been writing some PHP code to handle AMF3
serialization and deserialization so that I can pass objects back
and forth over a socket. In trying to implement the
AMF3
specification, I'm having a bit of trouble with the concept of
references. The
OSFlash
site has this to say:
References are more prominent in AMF3 than in AMF0, and one
should have two or three arrays to keep track of them, one for
strings, one for objects and possibly one for class definitions
(some combine the second and third array). References are
per-body, so the reference arrays should be reset every time
a new body is encountered (this can happen if calls are batched or
if a /onDebugEvents body is sent.
Does this mean that each time a serialized object is sent
with a socket.writeObject(someObj) call that I need to reset these
references and start from scratch? That would make A LOT of sense
because otherwise, these arrays to track objects would grow QUITE
large over time.

You mean the lines below at Timer.java file?
#if (taskFired) // Task fired; run it, holding no locks
# task.run();
That's true; run() method is called synchronously.
It's a little bit confusing that TimerTask must implement
the Runnable interface just for this purpose. It let me
think that's another thread :))
It could have been another interface which would probably
be called "TimerContainer" or something like that.
Anyway, thanks for info.
java cannot do 'real-time' in any sense of the word.
As for your question about threading in
java.util.Timer...
/me quickly glances at the src code.
all the Tasks are executed from the same Thread
synchronously.
rob,

Problem with Java Memory "Could not reserve enough space for object heap"

Hi gurus,
I am not an expert with Java´s configuration, and I have a situation that I don´t understand. First of all, I am working at Centos 6.2 with jdk_1.6 and Tomcat 7.
The problem is...
- If I run Tomcat with JAVA_OPTS="-Xmx128m"* (at catalina.sh) all works fine.
- If I run Tomcat with JAVA_OPTS="-Xmx512m"* (at catalina.sh) an error appears:
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
This appear when I run java -version or when I try to stop Tomcat, and the Tomcat isn´t able to stop.
The strange thing is that my server has more than 200M free in physical memory. So, why Tomcat isn´t able to stop? and Why Java doesn´t use the free memory in my server?
Thanks in advanced.

Hello EJP, thanks for your answer.
I have explained bad.
The server has 703M free when Tomcat is stopped. I had mentioned that my server has more than 200M free in physical memory when Tomcat is running with JAVA_OPTS="-Xmx512m", so I don´t understand why these errors appear.
Do you understand me?
Recently I have checked the swap memory, and it is disabled. In spite of swap memory is disabled I think java wouldn´t need this memory because it has free physical memory
Thanks again.

Could not reserve enough space for object heap in Jdeveloper 11g R1

Hi,
I tried to increase the JVM heap size with Virtual machine = server and the value as -Xmx512m -XX:MaxPermSize=512M -Djbo.debugoutput=console in the project properties->Run/Debug/Profile->Default-Edit, but still getting the below error.
Any help is appreciated.
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=D:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JDK160~1.5-3\lib\tools.jar;D:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;d:\source\FCUBSInstaller.jar;D:\Olite10g_1\MOBILE\Sdk\bin\OLITE40.JAR;;
PATH=D:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\native;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;D:\Oracle\MIDDLE~1\JDK160~1.5-3\jre\bin;D:\Oracle\MIDDLE~1\JDK160~1.5-3\bin;D:\Olite10g_1\jre\1.4.2\bin\client;D:\Olite10g_1\jre\1.4.2\bin;D:\Software\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Windows Imaging\;D:\software\Clearcase 7.0\common;D:\software\Clearcase 7.0\ClearCase\bin;D:\Olite10g_1\MOBILE\sdk\bin;C:\Program Files\Liquid Technologies\Liquid XML Studio 2011\XmlDataBinder9\Redist9\cpp\win32\bin;D:\Software\Liquid Technologies\Liquid XML Studio 2011\XmlDataBinder9\Redist9\cpp\win32\bin;D:\software\oracle10g\BIN;D:\Jdev10g\jdk\bin;;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_14"
Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode)
Starting WLS with line:
D:\Oracle\MIDDLE~1\JDK160~1.5-3\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=D:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Xmx512m -XX:MaxPermSize=512M -Djbo.debugoutput=console -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1 -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\software\oracle\product\10.2.0\client_1\modules\oracle.ossoiap_11.1.1,D:\software\oracle\product\10.2.0\client_1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\oracle\store\gmds -Xms512m -Xmx512m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
Process exited.

This is telling you that there is not enough memory for the heap size you've specified. Increasing the heap size makes this worse, not better. You need more physical memory.
john

LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides

HI
When I put a network shared variable with fifo RT activated on my diagram, the arrow is broken.and I' ve got this message:
""LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides""
If I uncheck FIFO RT option for this variable the arrow isn't broken anymore.
I 've no idea how to correct this weird error?
Autodeploy is on, and I've check copy / delete in diagram in tool/options\diagram
regards,
james

Hello,
I don't reproduce this error.
Could you send your VI?
Regards
VéroniqueD
NI France

No persistent reference could be generated for object 'PAYLOAD'

Similar Messages

Maybe you are looking for