SCB indicator is missing or is not valid-No DME could be generated for the

Hi All,
Using transacttion F110,
vendor payments were generated. Payment run successful.
In 'Display Payment Run log',
Warning: Check whether a duplicate payment medium has been created
SCB indicator is missing or is not valid
No DME could be generated for the following documents
CoCd Payment document/Payment order
0100 2000199545
>
> Overview of the files generated (DME)
> Name / File name
> DME file (TemSe) - bank BK03 / DTA111128154701_3215
>> Error log / LISTFS / 0000093865
I have checked the document has SCB number stored.
please suggest.
Thanks and Regards
Reena

Hi Reena,
The error you have mentioned in the initial description is the error code F0265.
Regarding the error code F0265, this arises because the payment medium programs RFFO* look for the field bseg-landl and bseg-lzbzk to be filled.
These fields are necessary for Germany as the f1-help states and if they are missing, you receive these error messages f0265. Please have a look at note 23562 as well for more information.
Sometimes users forget to enter SCB indicator in the invoice document and thus it results in problem reported error messages
at the time of creating payment medium.
In this case either you can make the SCB indicator field "required" in the field status or create a validation rule for those invoices for which SCB indicator should be entered.
To derive SCB indicator automatically I think substitution rule could be of help too as a workaround.
Hope this helps.
Kind Regards
Soumya

Similar Messages

HT2731 How do I remove an email address that is no longer vaild for the iTunes Store? A really old email address keeps popping up on my iPhone, the email address is not valid and I have no idea what the password was. It's been over two years.

How do I remove an email address that is no longer vaild for the iTunes Store or my iPhone? A really old email address keeps popping up on my iPhone, the email address is not valid and I have no idea what the password was. It's been over two years.

Hello tcnolen1,
It sounds like you are trying to change the Apple ID logged into the iTunes & App Stores on your iPhone. Use these steps:
Changing your Apple ID account
Tap Settings > iTunes & App Stores, then tap the Apple ID signed in.
Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Thank you for using Apple Support Communities.
Best,
Sheila M.

The certificate is not valid and cannot be used to verify the identity of this website

Question posted in Stack Overflow too: java - How to solve "The certificate is not valid and cannot be used to verify the identity of this website" error? - St…
The question is, How to solve "The certificate is not valid and cannot be used to verify the identity of this website" error?.
Here are the details:
I have a signed applet that has been working fine, until I updated Java to 8u25 (1.8.0_25-b18). Now, the application shows an alert message "Do you want to continue? The connection to this website is untrusted". There is a note in this message too, "The certificate is not valid and cannot be used to verify the identity of this website".
The applet is loaded without problems. But when the user tries to use a specific function of that application, the warning message is displayed.
I've checked the java console when this happens, and this warning message is displayed right after these lines:
security: Obtain certificate collection in SSL Root CA certificate store
security: Invalid certificate from HTTPS server
network: Cache entry not found [url: https://sub.domain.net:9876, version: null]
The application is downloaded from a different domain, say "https://app.domain.net/ .....", so no jars are downloaded from "https://sub.domain.net:9876 ", but the applet connects to "https://sub.domain.net:9876 " to send/receive data.
The applet is signed correctly, and so far, it meets all the security requirements according to Java. This issue seems to happen when the application tries to connect internally with an HTTPS url like https://sub.domain.net:9876. That sites' SSL certificate is valid, issued by GoDaddy and has not expired.
Again, this started to happen after updating my JRE to 8u25. I've tested adding the offending URL to Java security exception list, with no success.
Here are a few screenshot of this problem:
This is the warning message displayed:

For what it's worth we discovered what the issue was. When we installed the new certificates onto our servers we also discovered that you have to install the certificates of all intermediate servers listed in your certificate. This mean that all URLs listed on your certificate, have to have the intermediate certificate for the certificate authority installed. This also includes all the Alt Names of your domains, even if they do not use the applet.

[Target] - Partition definition is not valid: [Cell count mismatch: [1814427] area for slice [1] members per dimension [67 1 1 1 1 1 1 1 51 531 ]]

Hello Everyone,
I am receiving the error : [Target] - Partition definition is not valid: [Cell count mismatch: [1814427] area for slice [1] members per dimension [67 1 1 1 1 1 1 1 51 531 ]] when trying to validate my transparent partition.
Because of some issues the data is not getting reflected at the target database.
Please suggest some solution.
Thanks in advance.

I would exercise the following steps
1.Copy the original partition script in a notepad
2.Open one source outline and target outline applications in EAS Console in vertical mode.
3.Check the partition members coming from both source to Target application are in sync, by checking the source members and target members in the respective cubes ,if any new member got added in your source partition intersection then you need the member in the target too,if they are not ,then cell count mismatch will occur.
4.Since its a transparent partition target the shared transparent areas of the data source and data target outlines need not be identical.The dimensions and member in the data source maps to each dimension and member in the data target.You need to define the definition of mapping
5.Create partition either using maxl or using create partition in EAS .
In your case 1 partitions has the cell mismatch counts ,since you are able to retrieve the data for 3 partitions in the target applications
Thanks,
Sreekumar Hariharan

Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!

Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS

No valid sequence could be found for the set of patches adobe acrobat x standard (10.1.3)

I have tried updating and/or repairing Adobe Acrobat X standard but receive the error message "no valid sequence could be found for the set of patches" I am using adobe acrobat x standard (10.1.3) running windows 7.The software came pre-installed and so I have the CD key but no CD. Thanks Nick

Hi Anoop.
I have tried the Help>Check for updates option and receive the same error message accompanied by error code 1648 (not sure if this helps). I have tried Help>Repair & Control Panel>Repair and receive the same "no valid sequence could be found for the set of patches".

No valid sequence could be found for the set of patches

I get the following error message when installing Acrobat 8.0 Standard:
"Windows Installer" No valid sequence could be found for the set of patches."
The CD installed with no problems on another PC. Both PC are running XP Pro SP2. The virus scanner was disabled before installation. I also had uninstalled a older version of Acrobat and Reader before installation. Even attempted to install by launching the setup.exe file.
Thanks.
George

This appears to be caused when nls codepages are missing from Windows..
I use nLite to clear items out of my installations, and because these entries are missing, it fails to install. Apparently Microsoft Office has the same issue..
I don't have a solution yet, but I am searching. This should help Adobe answer the question, though..

In app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.

in app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.
What i did
1 . Added three products more to the existing in-app
2 . Tested with sanbox
i am getting the error "cannot connect to itunes store" with error code "0" when trying to purchase product in sandbox.
Is sandbox is down?Please help guys..

Apple's sandbox has been down practically all month. You can check the status here:
http://sandbox.itunes.apple.com

When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build"

When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build" How do i fix this?

I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11 itunes v. 9.0 and I just want it to be restored. I need help. Oh and its an 8 gb ipod touch.

Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."

Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."

Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/

Since installing 10.7.3 my downloads say that I do not have enough space on my computer for the download. These downloads are never more that 200 megs or so and I have 270 Gigs left on my hard drive. What can I do to fix this?

Since installing 10.7.3 my downloads say that I do not have enough space on my computer for the download. These downloads are never more that 200 megs or so and I have 270 gigs left on my hard drive. Somehow the remaining space on my hard drive is not being correctly read. What can I do to fix this? I have run permissions repair several times, but to no avail.

Th downloads do not finish. I am dowloading to a file on my desktop called MUSIC, but it first starts to download to my desktop and then I move it to the MUSIC file also on my desktop and I have been doing this without incident using 10.7.2 as well as 10.7.1 and 10.7.

Not possible to determine a condition type for the price in ME49

Hi,
While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
Not possible to determine a condition type for the price
Message no. 06657
Diagnosis
When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
Utsav

Hi Utsav,
You can refer to the following link. it might be useful to you
RFQ price
Thanks
Nisha

Why is basic visual voice mail free on the Note 3 and 2.99 a month for the S4 ?

Why is basic visual voice mail free on the Note 3 and 2.99 a month for the S4 ?

I'm trying to reach these issues myself. There are a few different flavors of voicemail:
Basic voice mail -- the kind you call in with your phone and press touch tones, like people used to do twenty years ago. Included with contract.
Basic visual voice mail -- see your messages listed by caller, choose which one to play. Included with contract, but only on certain phones. The Note yes, Galaxy s5 yes, Galaxy s4 no.
Visual Voice Mail -- the 2.99/mo version Verizon wants you to pay for. Has the features of 2, but also will transcribe your voice mails into text. Available on most phones because it is a Verizon app.
iphone visual voicemail. Same as 2, for all intents and purposes. Has always been included because Apple established it as a condition for the carriers to be permitted to sell them.
The mystery is number 2, what you are asking about. Though it is mentioned on a verizon comparison chart, 'basic visual voicemail' is not discussed in any verizon literature and I suspect most techs don't know about it yet. It seems to have been enabled with a kitkat update (version 4.4.4 of Android) that has been released on some, but not all phones. I think the way it worked is that users were given a free trial of the pay version of voicemail, but at the end of the trial were able to 'downgrade' to basic voicemail and keep that without paying.
I also have an S4, and basic /no cost visual voice mail does not seem to be possible, though I have heard there may be some ways to make it work with technical workarounds. I have not confirmed any of these methods but they almost certainly would not be recommended by Verizon staff.
To get back to your question, basic visual voicemail and what Verizon calls regular 'visual voicemail' are different products. The basic seems to be a recent product only available on some phones. The regular 'visual voicemail' is the pay service available on all phones.

I can not activate my iphone to be used for the first time, it is blocked. how do i unlock. can someone help me

I can not activate my iphone to be used for the first time, it is blocked. how do i unlock. can someone help me

dis the activation server is not available try again later or contact tech support.
has no sim card installed more already tried with the sim card still not of.
bought in china.

J1INQEFILE is not generating for the month of March 2011

Hi,
J1INQEFILE is not generating for the month of March 2011, we have executed Qefile from 01/01/2011 to 31/03/2011 then file is generating but March 2011 data is not available.
Problem is challans were updated in the month of April 2011 for March 2011 documents, When we executed J1INMIS report with Bank Challan status, documents are coming in the report.
As per our understanding Challan numbers and Bank Challan update should be done in the month of March 2011 but challans and Bank challans were updated in the April 2011.
Please suggest.
Thanks,
Ratnam

Hi Vara,
Please check following thing in the system.
1) When the Challan is created ( March month or April 2011)
2) When the Bank challn updated for the challans
3) If the Challan created in the April and generating returns for the month of March 2011.
4) Check in J1INMIS report for the month posting date 01.03.2011 to 31.03.2011, if the external Challan number is appearing or not for the documents.
5) If the Challan created in the April ask user to revere through J1INREV, and make Challan in the month of march 2011.
Problem will solve.
Thanks,
Ratnam.

SCB indicator is missing or is not valid-No DME could be generated for the

Similar Messages

Maybe you are looking for