No POP choice anymore in Mail?

I'm a bit confused here (so what's new?)
Used to be that when setting up an account I got the choice between setting it up as POP or IMAP, but no longer. Why is that? Should it be that way?

You can get a comprehensive explanation if you google the difference between the two.
Basically, POP is older format. Only the inbox is server based. It downloads messages to your computer or device. How long it stays on the server depends on your settings. Each device that has this account on will download messages independent from other devices. Messages are actually downloaded and stored on the computer or device locally.
IMAP has all mailboxes usually set up as server based. Each device will communicate with the server and your device will show what is on the server, no matter which mailbox it is in. When set up correctly, an action on any device will create that on the server and will be available on all devices. If you delete a message on one and move a message to the Trash, every device will see the message in the Trash.
So in plain words, what you see in your mailboxes is just a reflection of what's on the server.

Similar Messages

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it freezes the browser. I have to constantly go to Safari Preferences to remove them and then the browser will start working again. What can I do to stop this?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Changing IMAP account to POP account in Apple Mail? I'm using OS 10.6.8 and Apple Mail 4.5. Thank you.

How does one change an IMAP email account to a POP account in Apple Mail? I'm using OS 10.6.8 and Apple Mail 4.5. Thank you.

How does one change an IMAP email account to a POP account in Apple Mail? I'm using OS 10.6.8 and Apple Mail 4.5. Thank you.

HT1338 I can no longer use Macmail for my btinternet account. I was advised to delete the imap account and begin again with a pop account for incoming mail. My Macbook will not let me do that and neither BT nor Yahoo have been able to help.

I can no longer use Macmail for my btinternet account. I was advised to delete the imap account and begin again with a pop account for incoming mail. My Macbook will not let me do that and neither BT nor Yahoo have been able to help.

Btinternet being your internet service provider? If I'm correct, have you followed their directions:
http://btbusiness.custhelp.com/app/answers/detail/a_id/7073/c/2048,2053,3883,206 5
Just found a seemingly newer article (and there are several more on the right of those pages):
http://btbusiness.custhelp.com/app/answers/detail/a_id/7071/related/1/session/L2 F2LzEvdGltZS8xMzU0NzI1NTMyL3NpZC9qaThFVi1jbA%3D%3D

Converting from POP to IMAP on Mail

I have had an ISP email account for a long time with Charter and have used it as a POP account with Apple Mail. It's worked fine for me. I've developed the habit of saving lots of old email in Mail in the Mailboxes (some kept in my Inbox and Sent box) and most catalogged into folders I've created in the On my Mac area.
I've recently gotten an iPhone and the Charter email setup on it results in an IMAP account. I've run into the "locked" inbox problem when I've recently accessed my mail with my iPhone and then try to access my mail on my iMac using Mail. I understand that it is probably better not to mix protocols and that I should use all POP or all IMAP. I've recently found out that Charter offers the IMAP protocol for desktop email access. They probably have for a long time but I just had no reason to look into it.
Anyway, I've pretty much decided to save my current Inbox and Sent box into On My Mac folders, then delete my Charter POP accont in Mail and create a new Charter IMAP account in Mail and then continue to use my Charter IMAP account on my iPhone. Does this sound reasonable?
I have a question about saving email from the IMAP account on my iMac as I have been doing with my POP acount. I know that the IMAP email will remain on the Charter server (up to some storage limit) but I want to continue to save and categorize at least some of my most important email in folders in Mail. Does the On My Mac concept still apply when using an IMAP account as opposed to a POP account? Will Mail basically look the same? What if anything about the way Mail looks to me will be different when using the IMAP protocol?
I suppose my use of web based Yahoo mail has exposed me to many of the differences between POP and IMAP. I believe that my Yahoo account is most similar to IMAP--correct?
I'm learning a lot more than I knew before about this email protocol business. I think I "almost" have it figured out.
Thanks,
Steve M.

Thanks Jeffrey. I thought I had about decided to convert desktop and iPhone to IMAP for Charter account but now I'm not too sure. OK, this is kind of a family "community" email account right now my wife is accessing it from a Macbook Pro and I'm accessing it from an iMac and we're both using Apple Mail with the account setup as a POP. We have Mail set to leave messages on the server for something like a week or maybe the next longest setting. I just want to be able to have a look at the email messages on my iPhone and maybe reply to one occasionally. I'm thinking now that trying to setup the account as POP on the iPhone may be the way to go. We alway end up saving and filing away lots of email messages on the iMac and the laptop. I know with Yahoo and Gmail there is a practically unlimited amount of online storage but with Charter I think there is a 1 GB cap. I am beginning to fear that with IMAP we may run up against that cap.
Thanks,
Steve M.

I deleted a pop email account from mail. How can I recover those sent messages without Time Machine?

I deleted a pop email account from mail. How can I recover those sent messages without Time Machine?

Thomas,
"Note that you were warned that this would happen and approved it. When you delete an e-mail account in Mail, you are shown a message like the following:"
You didn't read my problem - I said I deleted a POP email account. I always read the messages that pop up and in Mail when you delete a POP account - IT DOESN'T TELL YOU NUTHIN! It just deletes it - which *** for me. Fortunately, I had an iPhone and on that device I had about a 1000 messages that I could recover but on all my POP accounts I download them from the server onto my Mac so they were only on Mail (the really old ones that I wanted to keep.) I had to move them into another directory one by one basically because when I would move 50 some of them would move and some wouldn't and I never did figure out that problem. Basically the ones that would not move are the ones that were associated with my domain changes with GoDaddy, and there were a lot of those. Have no idea as to why only those were resistant to moving but I can get all that data from GoDaddy anyway.
This thread is now moot seeing as how I've recovered everything I can and am going to just move on - and back up more often. ;-)
Apple and Mail need to rewrite that program to include a WARNING MESSAGE when deleting an Account in Mail that says ALL YOUR MESSAGES ARE GOING TO DISAPPEAR NEVER TO RETURN IF YOU DELETE THIS ACCOUNT, SO YOU DANG WELL BETTER HAVE A BACK UP IF YOU WANT TO KEEP ANYTHING BEFORE PRESSING THAT MINUS SYMBOL! ;-)

I need the POP and SMPT of mail.live.in

hi\\
I need to know the POP and SMPT of mail.live.in

Open the file using QuickTime Player and then open the Movie Inspector window.

I can't take my Mail account online anymore on Mail App.

I'm using 10.9.5. Mac
Since 2 weeks ago I can't get all my email account online anymore on Mail App, even my iCloud email. I've done the instruction on Mail Connection Doctor to thick/unthick the SSL but it still doesn't work. Anyone?

Troubleshooting Apple Mail
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

Change account setting from POP to .mac in Mail

OK, I have an account I set up in Mail. It is a .mac account, but I inadvertently set it up as POP. Suddenly on March 1st, sending messages from that account would always fail.
"Cannot send message using server smpt.mac.com"
It works fine now from my other accounts (even my other .mac accounts), but not the one that is set as POP in Mail.app. If I edit the massage to change the "from account,' then it works fine.
Could this failure to send problem be related to setting up the account as POP? I don't see how to edit that setting anymore. I don't want that setting to carry over to the iPhone when I buy one and sync it. Thanks.

"What double punctuation problem?"
http://discussions.apple.com/thread.jspa?threadID=822572&tstart=0
It turned out to be caused by a corrupt launch services database.. It''s known to cause Spell Checker to double punction marks.. It also stops Mail from sending messages..
I bet this corruption is the reason that my Mac didn''t recognize the iPhone that was attached.. Also,, it''s probably the reason why I couldn''t sync my old phone via my Bluetooth adapter.. I'll reset Launch Services and see if that fixes these problems..
BTW,, I set up a new Mail account as .Mac and I was able to send messages.. I haven''t checked again since I started getting this double punctuation.. I bet I can''t.

How do I change the default POP account directory (~/Library/Mail)?

With Mail 1.0 in 10.3.9, I could change the default ~/Library/Mail storage location for a POP account. I did this by setting up an account and in the advanced tab choosing a path.
With Mail 2.0 in 10.4.4, when going through the guided account setup, the directory option is no longer available. But the option still shows greyed-out, so I assume it's possible to change.
<img src="http://www.j-arch.com/images2/mail.jpg" </img>
How do I get my POP account to store somewhere else?
G4 1.25 MDD Mac OS X (10.4.4)

hmmm.. I've been complaining about this to the engineers for over a year. The storage location should be chooseable as should there also be a backup feature (as in Addressbook and iCal).
for those that want to change this... it would be cool for someone to write a non cryptic, complete 1,2,3 stepped procedure.
That is.. exactly what do you change to what in the mail user preference file? And what do you use to change it.. text edit? "[ ]" heretofor = folder
I would like to change my Mail storage location to the my [Documents] . Using Text Edit, I went into my user [Library], to [Preferences] and opened the com.apple.mail.plist and changed all the ~/Library/mail storage locations to ~/Documents/Mail
lastly I moved the [Mail] that was in the [Library] to my [Documents].
Didn't work. Restarting Mail got me into the guided set a new account (and as far as I can see there IS no way of not taking the guided set up as alledged above). There must be something, some built-in direction other than in the [Preferences] defaulting mail to be saved in the [Library] folder
If someone has done this and been successful.. a 1,2,3.. list would be apprecaited... and please don't leave any details out. Thanks
dual core Intel G5 Mac OS X (10.4.5) Pismo powerbook specialist

Images or pdf not inserted anymore in Mail

Hello,
my images or PDF are not "inserted " in my mail messages anymore
the only show as an attachment
How do I bring back the "inserted"
what terminal commandto re-activate "insert docs (jpg, QT, PDF) within email

Hi,
what you are seeing is just the way the message is displayed for you on your Mac. There's no difference in sending (an receiving) the mail whether you used icon view or the full preview while composing the message. Even though you might have set it to show the image directly as a full preview while composing, the receiver's mail client might be set up to always show attachments as icons and not inline.
To switch the view for you while composing simply right-click on the image, pdf, etc. and select *View as Icon* or *View in Place*.
It's one of Mail's annoyances that there's no option to always use one specific view mode. It automatitcally decides what to do. That is, everything is shown +in place+ unless it reaches a certain file size or is a multi-page document (pdf).
Björn

Mail.03 will download received mail from Gmai uising pop but not sent mail

After upgrading to Leonard, I decided to reconfigure my gmail with Mail.03 (hopping to eliminate the non sound issue when new mail arrives. Prior to this Gmail downloaded all received and sent mail. After, only received mail is downloaded but sent mail is No not. (Nor can I successfully send mail using Mail 0.3 through gmail.
I tried setting up an imap account and could not download any sent or received items.

Hi Hector.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, and making sure that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is stored.
3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
4. Move any “IMAP-” or “Mac-” account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all mail stored there to be lost.
5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
6. As a side effect of having removed the IMAP account folders, those accounts may be in an “offline” state now. Do Mailbox > Go Online to bring them back online.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

No image size pop-up window in Mail 2.1

I'm accustomed to seeing a pop-up window at the bottom of my mail, giving me the option of resizing a photo, and telling me how large my message is. Today it's not there. This is probably something easy that I've unclicked, but I can't find it. Oh, it's Mail 2.1, on an eMac running 10.4.8.

I had this problem and it was related to a Mail plugin (Daylite DMA).

Valid POP password rejected by mail

I've seen this problem before with my mother-in-law's account, and wasn't able to resolve it so she simply stopped using my server for her email, but that's not an option for me, so here's the situation as near as I can tell.
One of my POP3 accounts started instantly erroneously showing "POP server rejected the password" a couple days ago. I've verified that it's a Mail issue by both logging in to webmail on my server with the same login info as Mail has, and then also configuring Thunderbird with identical info and it successfully logged in and downloaded all messages.
The error message actually pops up even before it could possibly attempt a login to the server, but I'm not sure where else I can check to troubleshoot. I tried repairing the Keychain, and it reported no problems. I also tried deleting any Keychain entry for that account to no avail either.
Further information that links it to Mail.app instead of the server or another ISP-related problem is that I have a couple other POP addresses on the exact same server that don't have any problems logging in.
MacBook Mac OS X (10.4.9)

One of my POP3 accounts started instantly erroneously
showing "POP server rejected the password" a couple
days ago. I've verified that it's a Mail issue by
both logging in to webmail on my server with the same
login info as Mail has, and then also configuring
Thunderbird with identical info and it successfully
logged in and downloaded all messages.
The error message actually pops up even before it
could possibly attempt a login to the server, but I'm
not sure where else I can check to troubleshoot. I
tried repairing the Keychain, and it reported no
problems. I also tried deleting any Keychain entry
for that account to no avail either.
Hi,
Could you please specify more precisely WHEN the error message is shown?
For I have a client that has the same problem and we tracked it down to a stupid timeout problem in Mail - description
- Start Mail
- Check for new messages
- Activity window shows that Mail is sending user name/password to the POP3 server
- Mail is waiting for the "+OK User johndoe has xx unread messages." message from the server
(actually it is only waiting for "+OK" part of the conversation but ....)
- The problem arises when my client leaves to many unread messages on the server. Then it takes SEVERAL MINUTES before the server will come back after Mail did send user name/password.
HOWEVER (lil' stupid) Mail has a timeout of (iirc) 1 minute before it gives up assuming that user name/password was incorrect. And displays the dreaded error message "POP server rejected password"...
So - please test with Terminal or any other programm how long it takes (after providing user name/password) until the POP3 server comes back with the message "+OK"....
This will help diagnose the problem.
Cheers,
Walter

Wifi Login window isn't popping up anymore after update to 10.9 Mavericks?

I recently updated my Macbook Pro Retina 15" to 10.9 Mavericks, and since the update, the wifi login window no longer pops up as it did before. I live on a campus residence property with wifi that I have to login with my student ID and password. Before, when I opened my macbook and logged in, the wifi login window would immediately pop up, but now it doesn't pop up at all, and instead I have to manually open Safari and try to access a webpage for it to work. What gives? It's a minor inconvenience I know, but I find it annoying now that even if I only want to use an app like Calendar or iTunes, I have to open safari and click on a link in order to login instead of the window popping up automatically like it did before.
Was this removed from 10.9 altogether or was there some sort of glitch in the upgrade process?

I realize now that the app I'm talking about it the Captive Network Assistant. Something has gone wrong with its detection, as it's not popping up at all anymore. From what I've read, I'm not the only one with the issue either, it seems that after every major OS X update since the feature was introduced, it breaks for some users. I just haven't found any solutions. Anyone, please, any ideas at all?

No POP choice anymore in Mail?

Similar Messages

Maybe you are looking for