No posting possible in fiscal year 2015

Hi
I am getting below pasted error while performing AFAB (Depreciation Run). This is the first time we are running the depreciation in the production system. We did not encounter this error in quality or development. This is a gap implementation project, where in FI-AA was not implemented earlier. But all the GL accounts related to Asset GL, Accumulated Dep GL and Depreciation GL were created and has been in use till date since 2005!!. And client has been acquiring assets manually, posted depreciation manually. So I have reused the same GL accounts during our implementation as per client's requirement.
I have closed all the previous period and opened the new fiscal year up to 2015 (From 1st August 2014 new fiscal year starts i.e 2015).
Kindly help.
No posting possible in fiscal year 2015
Message no. AA688
Diagnosis
No posting is possible in the fiscal year 2015 specified. The fiscal year
specified differs by more than a year from the fiscal year in which the last
postings were performed.
Procedure
Correct your fiscal year specifications

Asked abaper to write this code
*& Report  YTEST_FIXED_ASSETS*&
REPORT  ZTEST_FIXED_ASSETS.
Tables T093D.
Update T093D
Set  AFBLPE = '000'         " <=== correct period
          AFBLGJ = '0000'        " <=== correct fiscal year
          AFBANZ = '00'
          STATUS  =    ' '
  Where BUKRS  = '1000' and   " <=== company code
          AFABER = '01'   and   " <=== depreciation area
          AFBLPE = '012'  and   " <=== wrong period
          AFBLGJ = '2008'.      " <=== wrong fiscal year

Similar Messages

  • Account not posted to in fiscal year 2010 or trans. figures arc

    Hello  Experts
    i am getting the following error in fs10 while seeing the balances at balance sheet level after done full settlement in CJ88
    Account 172001 0219 not posted to in fiscal year 2010 or trans. figures archived
    Can anybody please give me suggestion?
    Thanks and Regards
    vamsi

    Hello Exports
    thanks for your help
    My problem was solve by my slef
    thanks
    vamsi

  • There are no depreciation areas to post to in fiscal year 2008

    Hi,
    Iam facing a problem during Depreciation run in t-code AFAB.
    here are no depreciation areas to post
       There are no depreciation areas to post to in fiscal year 2008
        Message no. AA695
    Diagnosis
        You have requested a depreciation posting run for fiscal year 2008.
        The program has determined that depreciation areas are still open for
        this fiscal year, but according to their configuration, these areas do
        not post depreciation.
    Procedure
        Please check your entries.

    Hi
    Check the settings in OADB for the depreciation areas
    Thank You,

  • Excise Invoice Posting in Last Fiscal Year.

    Hi,
    Can excise invoice be posted in fiscal year 2011 for fiscal year 2010 if period of fiscal year 2010 & 2011 are open and  number ranges have been not maintained for fiscal year 2011 but number ranges are available for fiscal year 2010?
    Is there any system bug that excise invoice can not be posted for last fiscal year if number ranges are not available for current fiscal year?
    Regards,
    Suman.

    Hi,
    I clarifies my issue in more simpler way as follows.
    I have heard that if we post excise invoice as posting date 31-03-2011 (For last fiscal year. Number range available) on 01-04-2011 (Current fiscal year. Number range not available) then system will not allow for posting for posting date 31.03.2011 as a system bug. System will allow posting for 31-03-2011 (For last fiscal year) if number ranges are available for current fiscal year ( For 01-04-2011).
    Is it true ?
    Regards,
    Suman.

  • GL account that doesn't reset, after finished the post of end Fiscal Year

    Iu2019m facing a new problem while trying to perform the process of close fiscal year, the process that I do be the following:
    F.01> F.16>F_IT_01>F.16>F.01
    After that all the process is done, i analyze the balance sheet, and see that some general ledger account, of  profit and loss statement account , doesn't zeroed.
    but I removed the flag that allow only automatic post and re-did the process, but the error keeps happening. Could you please help me to fix that error? Has anyone faced a similar situation?

    Sutton, I don't know if I made myself clear but the problem we are facing with the system is related to the end Fiscal Year, i need carry forward the final result of some P&L account for following year, but i'm not getting. What I mean is, as i do to carry forward of the final result of a P&L account for following year, once Im working in an American company code placed in Brazil, once i had done process of end Fiscal Year closing?
    Holdstock, I already checked, and it is set as P&L...so I dont know if there is any relation between chart of account with chart of account consolidated, but my costumer uses a chart of account for Brazilian branch and one another chart of account consolidaded for matrix, in USA

  • Unable to post in Asset Fiscal year 2006

    Hi All,
    While creating purchase order, system is giving following message-
    You cannot post to asset in company code IN00 fiscal year 2006
    Message no. AA347
    Diagnosis
    A fiscal year change has not yet been performed in Asset Accounting for company code IN00.
    Procedure
    Check the asset value date.
    Please tell me what to do.
    Thank You

    Hi,
    First close your previous year(AJRW), at the time of closing you will check test run option will be activation mode or de activation. after that execute(AJAB).
    it is helpful don't forget reward points
    Thanks & Regards
    gvr

  • AJRW getting error for fiscal year 2015

    Hi Expert, while doing AJRW getting error
    see the screen shot below.
    Kind regards
    Pranav Kr. Gupta

    Hi Pranav,
    In AJRW transaction please check the "Error Log" what is exactly it is mentioned over it.
    Plus I would also suggest to execute Transaction OAAQ & OAAR to check the Years that are closed.
    Also execute AJAB T. code in Production Run first and then execute AJRW.
    Thanks.
    BR, Jaymin

  • Can we post entries in 2014 and 2015 fiscal years simultaneously

    Hi,
    Now we are in fiscal year 2015.Still postings are going on for FY2014.Not yet done any year end activities for 2014.Client is asking to open posting periods for fiscal year 2015.They want to post in fiscal years 2014 and 2015 as well simultaneously. Is it possible? If possible,what are the precautions we need to take ?
    Thanks

    Hi
    Yes if you have special period defined for 2014
    or keep both Fiscla period open in FI .
    in MM you should be able to post only in period 12 of fiscal year 2014 . so its depend on what sort of entriews you want to post

  • The fiscal year specified differs by more than a year from the fiscal year

    Dear All
    To rectify depreciation posted at development server I run OAGL which reset all depreciation posted (From FY 2008 to 2010), now when I am trying to post depreciation by AFAB for FY 2008 system showing error message
    No posting possible in fiscal year 2008
    Message no. AA688
    Diagnosis
    No posting is possible in the fiscal year 2008 specified. The fiscal year specified differs by more than a year from the fiscal year in which the last postings were performed.
    Procedure
    Correct your fiscal year specifications.
    please advice me what step to be follow
    Regards
    Sekhar

    Hi Sekhar,
    Error AA688 typically occurs in two situations:
    1) A company code did not have any depreciation posted in the previous year. See note 144441.
    2) If in a comany code no depreciation has been posted ever, then it is important to note that the periods of the last depreciation posting  in table TABA and the year and period of the last depreciation posting in table T093D (fields AFBLPE and AFBLGJ) are initial. You can set these fields to 000 / 0000 with the correction report attached in SAP note 26073.
    See if any of this information helps you further.
    Brigitte

  • Items are in different fiscal years - Posting

    Hello
    Here one user is doing a transaction F-32 for clear customer items.  He has to clear items but the items were posted in different fiscal years.  When he tries to post the document, it gives the message "Items are in different fiscal years".  few items are in the last year and rest are in the current year. Both the fiscal years are open in the case.  How can I post the document ?

    can you provide the message number.
    can you also confirm if this is an error, warning or message.
    As standard you should be able to clear open items from different fiscal years.
    Are you matching invoices off with a zero balance?
    Also can you confirm if you have activated document splitting?

  • Error: "posting period is not defined for fiscal year variant" in  FBICS3

    Hi,
    I got error  "posting period is not defined for fiscal year variant" when I execute t code FBICS3.
    I checked in OB29 &  t code FBIC010 & noted that the fiscal year variant had ben maintained.
    Please advice.

    HI,
    It was noted that the mentioned t code had been maintain but below mentioned error appear:
    Posting period  is not defined for fiscal year variant
    Message no. GU506
    Diagnosis
    You have tried to determine a posting date in fiscal year variant for period , fiscal year , but this period is not defined for the variant.
    Procedure
    You maintain fiscal year variants in table T009.
    It was referring to t code OB29. I have checked the detail, in OB29 also details maintain.
    Please advice why the error still prompt.

  • Asset value date must be in fiscal year of posting date

    Hi,
    When i try to post settlement of AuC in transaction AIBU with parameters:
    document date: previous fiscal year
    asset value date: previous fiscal year
    posting date: new fiscal year
    I know that:
    The asset value date is the value date for Asset Accounting. It can deviate from the posting and document date and be in posting periods already closed for Financial Accounting. <b>However, the posting year and asset value date year must be the same.</b> (SAP documentation).
    But maybe someone knows the way, how to post such a document??
    Regards
    Gosia

    Thanks for Your replay,
    But the pravious year is opened in FI-AA and closed in FI. We can't open previous year in FI.
    Do You know another way to solve it??
    regards
    gosia

  • Mass change of posting date/fiscal year in LIV parked invoices

    Hi,
    We have OSS note 99775 (program ZFSAP2_B) for mass changing posting date and fiscal year for FI parked documents but I can not use this to change posting date for LIV parked invoices.
    Did anyone have any idea how to mass change the posting date of LIV invoices? any NOTE or PROGRAM?
    I tried to create a BDC using FBV4, which in turn calls MIR4, but system is over writing  initial line item amount and qty from PO. 
    I can read initial invoice line item values and over write again but I dont think this is how I should do.
    Please advice.
    Thank you all and best Regards
    Vijay Goli

    Hi
    Thank you very much for your input.I modified the program ZFSAP2_B given by sap and it worked fine for LIV invoices also.
    When I used this program  in 2007 for FV60 documents the document key was changed without raising the event FIPP.CHANGED. But this year when we changed the posting date the system triggered the CHANGED event and as a result of this event the workflow came to the starting point. We did not make any chages to workflow template during 2007. Any idea what could have casued this event to trigger?
    Thanks
    Vijay

  • It's possible to have multiple fiscal years in HFM application?

    We have some entities with fiscal year from January to December but others adopt the USA fiscal year.
    I want to know if it's possible both fiscal year in the same application and how it works?
    Regards

    Hello,
    HFM is not designed to have mutliple fiscal years, I would suggest you can create new applications.
    Hope this helps,
    Thank you,
    Charles Babu J

  • Fiscal year and posting period

    Hai friends,
    I have a requirement like this,
    when I choose say 02/2008(posting period/fiscal year or posting period and fiscal year) in the Variable.  I also get data for the last twelve months….so my report would have
    02/2008,01/2008 ,12/2007…………………………………….03/2007.
    This variable should default to current posting period/fiscal year. So when somebody logs in he sees the current month and last twelve months.He can then change it to whatever he wants.
    The way I see it is that I have to write a customer exit and create a variable in which in “to” we will have current fiscal year/period and in “from” will have “Current fiscal year/period-12”.
    How to do this.
    Any help will be rewarded.
    Thanks in advance.

    Hi,
    Your approach is right.
    If you want the values to default and allow the users to change it, you should put the code under STEP I.
    WHEN 'variable'.
    IF I_STEP = 1.
    REFRESH e_t_range.
    CLEAR l_s_range.
    l_s_range-sign = 'I'.
    l_s_range-opt = 'BT'.
    l_s_range-low =  'Current Value - 11 periods'
    l_s_range-high = 'Current Value'
    APPEND l_s_range TO e_t_range.
    Mathew.

Maybe you are looking for

  • Newbie help with sample Studio app. "Plain Text Editor"

    I'm trying to make the jump from AppleScript to AppleScript Studio, and because I want to eventually write a document producing application I thought I'd start with the textbook example "Plain Text Editor" included with Xcode. I think I see how menu

  • New Toshiba L850 Blue Screen Of DEATH!!

    Well I just purchased this baby on the 28th of august and now its the 14 of september and ive gotten the blue screen of death multiple times. I have tried restoring it with the backup i made when i first booted it and tried system repair. I have neve

  • Please help! Not able to set Video input Port(S-Video or Composite)on Linux

    Hi I am using JMF2.1.1e(Linux performance pack) for video capturing on Linux OS. I want to set video input port(S-Video or composite) through my application. I am using the following code:      if ( dataSource != null )           arrControls = dataSo

  • LDAP as a user source in UME

    Hi all, We have a concern regarding the user source to be selected at UME level. At CUP level you can also set the user source for user details. Our questions here: 1) Is there any relationship between such user source configuration? 2) Which is the

  • Computer freezes whenever I turn on screensaver, and . . .

    System Preferences freezes whenever I try to edit/change the screensaver. I have my mac set to "hot corners" so that if I drag my mouse to the lower right corner, my screensaver will turn on. I sent in my macbook a few weeks ago to have the optical d