No results found for Investigation Lead

Hi Experts,
I am currently facing a problem while selecting Investigation lead in the investigation tab. I am not able to see any results for investigation lead. Can you please help me out in understanding where the data for investigation lead can be configured.

Hi Gunther,
I realize that this thread is a little old and you have probably resolved the problem already.
I had the same issue and after a couple hours of debugging, figured out what was causing the issue for me - hopefully it can save some other some time too.
The short answer (if you have not implemented the BADI):
The search is looking for agents (users) that are configured for a specific task (as Sagar mentioned the SAP standard one is TS00500118). So if you have not implemented the BADI then check that you have maintained agents on the task ot set it as a general one (transaction PFTC).
Longer answer (if you implemented the BADI):
If you have implemented the BADI then you must make sure you implement both methods that it provides. The search help instantiates the BADI via a helper class and queries which task it should be looking for agents for. If you do not have any custom workflows, then just return the SAP standard task in the "GET_TASK_ID_OF_PERFORM_INV" - same as the standard. This will then return search results - assuming you have maintained the task.
Here are some screenshots:
My BADI looks as follows:
I implemented the following method to pass back the task number:
Search results now return:
The reason we implemented this BADI at our client was that we didn't want to have the lead investigator defaulted.
Below is where the search helper class (CL_EHSS_INC_INC_SEARCH_HELPER) is invoked.
Regards, Warren

Similar Messages

Lead import - Primary contact point not found for sales lead contact

Hi All, I am looking for a solutions, This is Leads import :
Concurrent program:
Import Sales Leads - Any clues ???
Starting child process# 1
Sales Lead Import Child #1 started at 26-Mar-2008 10:21:46
Getting the saleasforce_id for the user ...
Salesforce_id for the logged in user is : 100012066
Processing import_interface_id: 14002
budget: currency:USD
Value of currency :USD
Before calling custom hook for party match
Returned from custom hook with party_id:
Start DQM - TCA Processing
Starting DQM - TCA time: 20080326102146
#1 :: Calling FIND_PARTIES with OSR found = N
rule_id 33
After find_parties matches 0
No party match found !
Contact blind search begin: using FIND_PARTIES (Person)
No person match found !
DQM returned: YYYY-NNNN
Call user_hook is false
Creating location
Location created: 7322
Organization created: 173251
Creating party site for Organization
Creating PartySite for 173251:7322
ORGANIZATION Party Site created: 120133
Creating Party Site Use
PS Use created: 124173
Creating the Contact
Contact created: 173252
Creating Relationship
subject_id 173252
object_id 173251
Creating OrgContact
OrgContact created: 110104
Party Relationship created: 110153:173253
Creating party site for Relationship
Creating PartySite for 173253:7322
REL Party Site created: 120134
Creating Party Site Use
PS Use created: 124174
Creating contact point (1)
End DQM - TCA time: 20080326102147
Start Create - Process Lead time: 20080326102147
do_create_saleslead:Start
Total Lead Lines: 0
Primary contact point not found for sales lead contact
create_sales_lead:Start
The column(s), SOURCE NAME, must exist. The missing column is either required by the database or required based on the data that is being imported.
do_create_saleslead failed
Message Count:1
Batch Size:1
Number of Records Successfully Imported:0
Number of Records with Errors:1
Number of Records with unexpected Errors:0
End Child Import Process time: 26-Mar-2008 10:21:47
Message was edited by:
J.Harsha

Can you please tell us your EBS version? - 11.5.10.2Thanks - Nagamohan
I had a SR: this is the solution
Can you please check the profile value 'OS: Source Code Mandatory for Leads' on all levels ( Site, application, responsibiloty and User). If the profile is set to Yes, please set it to N

RoboHelp HTML Version 10, Why has my CHM search stopped working? I get "no results found" for all searches.

RoboHelp HTML Version 10,
Why has my CHM search stopped working? I get "no results found" for all searches...........rob

Likely you need to re-register some DLLs and recompile.
Click the link below and follow the information you find there.
Click here
Cheers... Rick

Customization of no results found for reports

Hi All,
Is there a way we can customize the no results. Now it shows the filters as well which I do not want to show as they should be hidden
No Results
The specified criteria didn't result in any data. This is often caused by applying filters that are too restrictive or that contain incorrect values. Please check your Request Filters and try again. The filters currently being applied are shown below.
The above message is OK but filter conditions should not be visible
Regards
(S.prashnt)
Edited by: user783550 on May 26, 2009 9:44 PM

Hi,
see this below link at the end shows how to customize no results
http://shivabizint.wordpress.com/2009/04/13/date-validation-for-dash-board-prompt-calendar-control/
hope this helps you
Regards
Naresh

No results found after extending VO

Hi all,
I extended a VO. Added 3 fields,tables and joins. It got compiled successfully. I transferred them into $JAVA_TOP in Bin format from myclasses.
I imported the jpx using JPX IMPORTR.
It gave: Imported document : /oracle/apps/icx/por/wf/server/customizations/site/0/ReqLinesNotificationsVO
Ques 1) Shouldn't it give the VOEx?
Ques 2) Where shoud I run the command. As of now I transffered the jpx to PO-TOP and have ran the command in DB_TIER PO_TOP
java oracle.jrad.tools.xml.importer.JPXImporter $PO_TOP/XXW.jpx followed by other credentials.
Then when I went to the front end and did a transaction I got No results found for that Rn where the VO was extended.
Note: I have still not mapped the new added fields using personalization.
Ques 3) In about this page I din see the Original VO. Is it normal? The extended VO was there.

Hi All,
it's working now. The problem was with the VO query. The tables in teh original VO had _all (org specific tables) and I used without that. That was the problem.

I can't search for books or authors on my iphone 6. It says no results found every time. Is there some setting I may have wrong? I have been using my kindle app instead.

I can't search for book or authors in ibooks. When I search an author or book and click on it a message that says not results found comes up. Even if I try to look up something popular like Dracula or Twilight. Is there some setting I should have clicked? It won't find or download any books at all anymore. This started about a month ago. I have been using my Kindle app instead.

Hi laurieg23,
I see that you are having issues with your connection to the iBooks Store. Here is an article with some troubleshooting steps that will be relevant to your issue, even though the article was written for issues with the iTunes Store:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update(iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store - Apple Support
https://support.apple.com/en-is/HT201400
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Hello I was trying the latest version of Mathmagic pro edition for indesign. I found that the leading is not automatically done in Indesign, Ihave attached to files where equation have overlapped while working with mathmagic. Do you have a solution for t

Hello
I was trying the latest version of Mathmagic pro edition for indesign. I found that the leading is not automatically done in Indesign, Ihave attached to files where equation have overlapped while working with mathmagic. Do you have a solution for this?

The forums don't accept attachments. You can embed an image in a post using the camera icon in the editor, like this:
or you can provide a link to an external file on a hosting service.

I searched for "Download FireFox 5 - got the following results: Found 1023 results for download firefox 5 in English. Please save me from having to wade through 1023 results to locate this download!

I searched for "Download FireFox 5 - got the following results: Found 1023 results for download firefox 5 in English. Please save me from having to wade through 1023 results to locate this download!

Why do you want the 5.0 version and not the just released Firefox 6 version?
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
*http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest-5.0/

SFTP Issue in OSB invocation resulted in an error: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,ip

I created a Proxy Service to do pull file and push it to sftp server
known_hosts file is present on OSB server.
It has abcserverhostname,IP ssh-rsa AA................. ==
I created a business service to do SFTP push to sftp server (remote) - Its not working.
<Error> <SFTPTransport> <BEA-381826> <Key Not Found for host hostname,10.124....>
com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124.....
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
My Business Service
End Point URI : sftp://sftpserverhostname:22/directorypath
Authetication Mode : user name, password.I have created a Service Account for sftpserver and imported in Business Service.
Do I need to give anything else in known_hosts file ?
and hostname can be any random name?
<Dec 11, 2013 1:45:37 PM GMT+08:00> <Error> <SFTPTransport> <BEA-381801> <Error occured for endpoint com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124....
com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessage(SFTPTransportProvider.java:161)
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessageAsync(SFTPTransportProvider.java:111)
at sun.reflect.GeneratedMethodAccessor566.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. see log file for complete stacktrace
Caused By: com.maverick.ssh.SshException: ssh-dss Key Not Found for host eirnode2,10.124.10.16
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.A(Unknown Source)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.verifyHost(Unknown Source)
at com.maverick.ssh2.TransportProtocol.C(Unknown Source)
at com.maverick.ssh2.TransportProtocol.processMessage(Unknown Source)
Truncated. see log file for complete stacktrace

BEA-381826 suggest that there is any issue with your public key in known_host file, can you cross verify it again. Also can you check if known_host file has appropriate permissions and I am assuming it is in /OSB_DOMAIN/osb/transports/sftp folder.
Hostname,IP algorithm publickey are the hostname, ip, and public key of SFTP server.
As per troubleshooting guidelines
The Key not found for IP, host error message indicates that the known_hosts file does not contain an entry that corresponds to the specified IP-host combination. If the entry exists, then try with another algorithm key; for example, if the earlier attempt was with an RSA key, try again with a DSA key.
Cheers,
Sahil

Report Painter for Non Leading Ledger (Error GH113)

Hi,
Kindly note that we are in the process of enhancing a report for Monthly Balance Sheet as per our client's requirement. The report is based on report painter and we want to add Ledger as an input selection so that the report can be run for Leading Ledger(0L) and for Non Leading ledger(CL)as well .Initially there was no ledger selection and the report ran only for Leading ledger (0L). However when we try to run it for non leading ledger CL it throws an error message GH113 (more than one ledger not allowed in drill down report.)
Our ABAP Consultants have investigated this issue and suggested that for field (RLDNR) ledger the program is picking up "CL" as per input selection , However 0L is also getting captured thereby resulting in conflict and consequently throwing error GH113.
Concern
1) Does this report has a constraint that it can be run only for leading ledger and not for non leading ledger?
2) Apart from report painter form are there any other default setting which extracts "0L" and puts in the report.
Also note that the report painter form settings have been checked thoroughly and ledger has been defined as local variable for input selection.
Thanks

Hi,
Thanks for your quick response. I have already added the ledger as part of report selection and declared it as a local variable so that input selection is possible. but When I select the non leading ledger "CL" and try to execute report it throws error message GH113.
have checked all the settings in report painter form and not too sure as to from where the report is picking up Leading ledger "0L" although as a part of input selection i have selected non leading ledger "CL"
Appreciate your response.
Thanks

Weather app on iPhone, iOS 8.1, shows "no results found" in China

Hello,
I've checked about 20 iPhones in China so far and they all seem to have the same problem.
When using iOS 8.1 or 8.1.1 (even 8.0.x) the weather app shows "no results found" when searching for any city in the UK. Only London can be found.
The same goes for Germany. Only four cities in the entire country can be found.
I have checked on several iPhone 6, 6+, and on 5c.
Even when using a VPN and being virtually in the US, I don't get any results for e.g. Manchester.
Could someone else with an iPhone purchased in mainland China do a search for Manchester and confirm this problem please?
Thank you. :-)

s●●●●●@gmail.com

How to get total number of result count for particular key on cluster

Hi-
My application requirement is client side require only limited number of data for 'Search Key' form total records found in cluster. Also i need 'total number of result count' for that key present on the custer.
To get subset of record i'm using IndexAwarefilter and returning only limited set each individual node. though i get total number of records present on the individual node, it is not possible to return this count to client form IndexAwarefilter (filter return only Binary set).
Is there anyway i can get this number (total result size) on client side without returning whole chunk of data?
Thanks in advance.
Prashant

user11100190 wrote:
Hi,
Thanks for suggesting a soultion, it works well.
But apart from the count (cardinality), the client also expects the actual results. In this case, it seems that the filter will be executed twice (once for counting, then once again for generating actual resultset)
Actually, we need to perform the paging. In order to achieve paging in efficient manner we need that filter returns only the PAGESIZE records and it also returns the total 'count' that meets the criteria.
If you want to do paging, you can use the LimitFilter class.
If you want to have paging AND total number of results, then at the moment you have to use two passes if you want to use out-of-the-box features because LimitFilter does not return the total number of results (which by the way may change between two page retrieval).
What we currently do is, the filter puts the total count in a static variable and but returns only the first N records. The aggregator then clubs these info into a single list and returns to the client. (The List returned by aggregator contains a special entry representing the count).
This is not really a good idea because if you have more than one user doing this operation then you will have problems storing more than one values in a single static variable and you used a cache service with a thread-pool (thread-count set to larger than one).
We assume that the aggregator will execute immediately after the filter on the same node, this way aggregator will always read the count set by the filter.
You can't assume this if you have multiple client threads doing the same kind of filtering operation and you have a thread-pool configured for the cache service.
Please tell us if our approach will always work, and whether it will be efficient as compared to using Count class which requires executing filter twice.
No it won't if you used a thread-pool. Also, it might happen that Coherence will execute the filtering and the aggregation from the same client thread multiple times on the same node if some partitions were newly moved to the node which already executed the filtering+aggregation once. I don't know anything which would even prevent this being executed on a separate thread concurrently.
The following solution may be working, but I can't fully recommend it as it may leak memory depending on how exactly the filtering and aggregation is implemented (if it is possible that a filtering pass is done but the corresponding aggregation is not executed on the node because of some partitions moved away).
At sending the cache.aggregate(Filter, EntryAggregator) call you should specify a unique key for each such filtering operation to both the filter and the aggregator.
On the storage node you should have a static HashMap.
The filter should do the following two steps while being synchronized on the HashMap.
1. Ensure that a ConcurrentLinkedQueue object exists in a HashMap keyed by that unique key, and
2. Enqueue the total number count you want to pass to the aggregator into that queue.
The parallel aggregator should do the following two steps while being synchronized on the HashMap.
1. Dequeue a single element from the queue, and return it as a partial total count.
2. If the queue is now empty, then remove it from the HashMap.
The parallel aggregator should return the popped number as a partial total count as part of the partial result.
The client side of the parallel aware aggregator should sum the total counts in the partial result.
Since the enqueueing and dequeueing may be interleaved from multiple threads, it may be possible that the partial total count returned in a result does not correspond to the data in the partial result, so you should not base anything on that assumption.
Once again, that approach may leak memory based on how Coherence is internally implemented, so I can't recommend this approach but it may work.
Another thought is that since returning entire cached values from an aggregation is more expensive than filtering (you have to deserialize and reserialize objects), you may still be better off by running a separate count and filter pass from the client, since for that you may not need to deserialize entries at all, so the cost on the server may be lower.
Best regards,
Robert

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
<i> 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error></i>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

Error in PO- No conversion found for TO to EA

Dear friends,
i got the following error in PO.
I have checked all the mat. master data... if any conv. factor mismatched.......But still not found result....
No conversion found for TO to EA
Message no. 8I171
Diagnosis
The UOM conversion does not exist
Procedure
The UOM conversion does not exist in the material master for the material and UOM entered
Plz. help....
Thanks in Advance
Navin

hi,
if the material is an excisable material , you would have maintained the excise settings for that material in J1ID Trx.
in that you have manitained as TO.
cHECK THE SETTINGS.
Regards,
velu

Account 'Acquisition:Acquis. could not be found for area 01 AU133

To provide for reporting in USD group currency the leading ledger currencies for each company code has been changed from only local currency to also include the group currency (type 30) of USD.
Once the above setting for group currency was made the fixed asset transactions are not posting and the subject error message is occurring. The threads in this forum for this type of issue have been read and all the t-codes have been checked (AO90, AO93, OADB, OAK4, OABW, etc. with no change. The account is defined for the company code as an asset reconciliation account. No SAP Notes were found to be helpful with this either.
Any suggestions other than these are greatly appreciated.

hi i have the kinda same problem "Account 'Loss made on asset retirement w/o reven.' could not be found for area 50" my dep. area is derived dep. area called 50 which is difference between 01 gaap and 25 ifrs dep. areas.
in oadb the XSTORE is not flagged, BUHBKT set for 5 and LDGRP_GL is set for IF ledger when i run askb some of the assets issues this error but i have done all the custm. in ao90 what could be the reason for this by the way all of the accounts derived from 01 and all of the accounts set in 01.
Edited by: farukisin on Jan 17, 2012 3:54 PM
problem solved some times the problem could be so tiny so that you cant see,
this is one of them the gl account was not created for the company code
Edited by: farukisin on Jan 19, 2012 3:50 PM

No results found for Investigation Lead

Similar Messages

Maybe you are looking for