No rows dba_stmt_audit_opts

Hi,
dba_stmt_audit_opts views returns no rows in oracle 10.2.0.5
Thanks

Is that a problem ? Well you should know that in 10G audit_trail is set to none, so you would see no rows as nothing is enabled for auditing. Thats where Aman pointed you on audit_Trail parameter. Provide the information and lets see how it goes ... and my answer assumes you are in default settings
Regards
Karan

Similar Messages

View data in one row

Hi, guys I have a table filled in this way and I can't modify the data inside:
F1 F2 F3 F4
1 A null null
1 null B null
1 null null C
2 D null null
2 null E null
2 null null F
3 G null null
3 null H null
3 null null I
Is there a way to see the data in this other way (without any NULL)?:
F1F2F3F4
1 A B C
2 D E F
3 G H I
Thank you
Alex
Message was edited by:
user566533
Message was edited by:
user566533

> About the Model clause, I am sure Rob can do better and I am waiting for his solution ;-)
This looks way too complex for the type of question for me. And as said you are generating more rows than necessary that have to be filtered by a subquery in the final step.
Although I'm convinced that the original poster does not have rows with data in more than one of the columns, I could not resist the challenge and came up with this:
SQL> create table mytable
2 as
3 select 1 f1, 'A' f2, null f3, null f4 from dual union all
4 select 1, 'B', null, null from dual union all
5 select 1, null, 'C', null from dual union all
6 select 1, null, 'D', null from dual union all
7 select 1, null, 'E', null from dual union all
8 select 1, null, null, 'F' from dual union all
9 select 2, 'G', null, null from dual union all
10 select 2, 'I', null, null from dual union all
11 select 2, 'H', null, null from dual union all
12 select 2, null, 'T', null from dual union all
13 select 2, null, 'K', null from dual union all
14 select 2, 'U', null, 'J' from dual
15 /
Tabel is aangemaakt.
SQL> select f1
2       , max(decode(l,2,f)) f2
3       , max(decode(l,3,f)) f3
4       , max(decode(l,4,f)) f4
5    from ( select t.*
6                , row_number() over (partition by f1, l order by f) rn
7             from ( select f1
8                         , l
9                         , decode(l,2,f2,3,f3,4,f4) f
10                      from mytable
11                         , (select 2 l from dual union all select 3 from dual union all select 4 from dual)
12                  ) t
13            where f is not null
14         )
15   group by f1
16       , rn
17   order by f1
18       , rn
19 /
   F1 F2    F3    F4
    1 A     C     F
    1 B     D
    1       E
    2 G     K     J
    2 H     T
    2 I
    2 U
7 rijen zijn geselecteerd.which I think looks easier.
> Is there a way to delete rows in model other than using subquery?
Not really. You can leverage the "RETURN UPDATED ROWS" clause to not return the original rows, in other words: delete the original rows from the result set. But generating extra cells that are to be deleted later on, generally does not make much sense and (therefore?) there is no way to delete rows in the model clause. So the subquery is the way to do it if you really want to.
Note that I use the subquery technique too for string aggregation using the model clause, because I tested the subquery filter is more performant than the RETURN UPDATED ROWS clause.
Regards,
Rob.

Refresh Dlookup data in the active row of a datasheet after modifying data

Difficult to explain - so I will give you my scenario -I have three tables Student, Home Room and Teacher - the Student is linked to a home room and the home room is linked to the Teacher. In my form using Student, I show the student, the home room and the
Teacher for that home room. (The student file has the HomeRoomID in it). I show the teacher by looking up the teacherID using the HomeRoomID (using Dlookup on the HomeRoom table to get the teacherID), save it to a textbox IDTeach. Using another Dlookup on
the Teacher table using IDTeach I get the teachers name in a textbox call TeacherLast
Works fine! - however if the home room is changed, using a combobox, the teachers name does not change -it does change if the data is refreshed (The HomeRoomID in the Student Table is of course changed)
My goal is to have the teacher name change in the row where the when the homeroom is changed.
I went to the Event - after Update on the combo box and tried to update the teacher ID and teacher name by using
Private Sub HomeRoom_AfterUpdate()
    Form![IDTeach] = DLookup("[TeacherID]", "Home Rooms", "[HomeRoomID]=Form![HomeRoomID]")
    Form![TeacherLast] = DLookup("[Last]", "Teacher", "[TeacherID] = Form![IDTeach]")
End Sub
But this doesn't work (Run time error 2448) because, I believe, it is trying to update all the rows in the datasheet.
Is there some way to qualify these statement to only work on the current row like
Form.currentrow.IDTeach = DLookup("[TeacherID]", "Home Rooms", "[HomeRoomID]=Form.currentrow[HomeRoomID]")
or is there and easier way (or anyway for that matter)?
Thanks

There is a 1 to 1 relation between the student and the teacher - a 1 to 1 relation between the student and the home room,  but a 1 to many relation between the teacher and the room.
Surely not? It would be a very exclusive educational establishment where every student had their own personal teacher, and their own personal room. A one-to-one relationship type between Teachers and Rooms is understandable, but is not the relationship
type between Rooms and Students one-to-many? The relationship type between Teachers and Students would also be one-to-many of course, but no enforced relationship needs to be created for this as it is implicit in an enforced relationship between Rooms
and Students. Diagrammatically the model would be:
Teachers----Rooms----<Students
A form simply needs to be based on a query which joins the three tables in this way with editable controls bound to the columns from Students and a read-only control bound to the Teacher column from Teachers. The control bound to the foreign key Room
column in Students would be a combo box. Once a room is selected the Teacher for that room would automatically show in the read-only text box bound to the Teacher column.
To make a control read-only BTW set its Locked property to True and its Enabled property to False.
Ken Sheridan, Stafford, England

Javascript - is there something like an "active row count" property??

Lets say I have a tabular form. Every time I use the form, the # of rows returned by the query will vary. Maybe first time I go to the page, the select statement returns only 5 rows, but the next day it returns 25 rows.
Is there some type of system variable to stores the # of rows visible on the page at a given time within this tabular form?
I realize that if I have an tabular form item with an id of f03 for example, then on each row it will be referenced as f03_0001, then f03_0002 on the next row and then f03_0003 on the next row etc...
In pseudocode, here is what I want to do:
For i = 1 to ACTIVE_ROW_COUNT (assuming this is the # of rows in the HTML table)
perform some operation on 'f03_000' + ACTIVE_ROW_COUNT
Do you see what I'm after? I checked the APEX api, but I couldn't find such a property. It seems like you can't do much if you can't figure out this current index # or the max on the page.
Also, I tried playing around with the "this" keyword in hopes of finding a pointer to the "current item" that would have triggered the onchange event, but no luck either.
Thanks in advance.

Hi:
Within javascript you can reference the columns of the tabular form as
<script>
col1 = document.forms0.f01; // the first updateable column of your report
alert (col1.length) ; // number of rows
</script>varad
Edited by: varad acharya on Dec 8, 2008 5:53 PM

Quantity fields not getting displayed in the second total row

Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
Abhishek

You can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel

Method all values from row

Hi,
Is there a method that get the all the values of a row? I've gone through the java api but didn't found one, but wanted to be sure.
If not I'll have to do getValueAt for every column?
Grtz

Here is one possible implementation using RowTableModel (a self made class).
To access a row, we can use this: Product product = (Product) model.getRow(rowIndex);
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.table.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.util.List;
public class Tabel extends JPanel {
    private JTable table;
    private JTextField filterText;
    private TableRowSorter<MyTableModel> sorter;
    private String output;
    private final MyTableModel model;
    public Tabel() {
        //Create a table with a sorter.
        model = new MyTableModel();
        sorter = new TableRowSorter<MyTableModel>(model);
        table = new JTable(model);
        table.setRowSorter(sorter);
        table.setPreferredScrollableViewportSize(new Dimension(500, 200));
        table.setFillsViewportHeight(true);
        //Single selection
        table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
        //Making sure columns can't be dragged and dropped
        table.getTableHeader().setReorderingAllowed(false);
        //Double click event
        table.addMouseListener(new MouseAdapter() {
            @Override
            public void mouseClicked(MouseEvent mouseEvent) {
                if (mouseEvent.getClickCount() == 2) {
                    System.out.print(output);
        //Create the scroll pane and add the table to it.
        JScrollPane scrollPane = new JScrollPane(table);
        //Add the scroll pane to this panel.
        add(scrollPane);
        JPanel form = new JPanel();
        JLabel l1 = new JLabel("Filter Text:");
        form.add(l1);
        filterText = new JTextField(15);
        //Whenever filterText changes, invoke newFilter.
        filterText.getDocument().addDocumentListener(
                new DocumentListener() {
                    public void changedUpdate(DocumentEvent e) {
                        newFilter();
                    public void insertUpdate(DocumentEvent e) {
                        newFilter();
                    public void removeUpdate(DocumentEvent e) {
                        newFilter();
        l1.setLabelFor(filterText);
        form.add(filterText);
        add(form);
     * Update the row filter regular expression from the expression in
     * the text box.
    private void newFilter() {
        RowFilter<MyTableModel, Object> rf = null;
        //If current expression doesn't parse, don't update.
        try {
            rf = RowFilter.regexFilter("(?i)" + filterText.getText(), 0); //"(?i)" => Zoeken gebeurd case-insensitive
        } catch (java.util.regex.PatternSyntaxException e) {
            return;
        sorter.setRowFilter(rf);
    class MyTableModel extends RowTableModel {
        private final List<Product> mData;
        private final List<String> cNames;
        public MyTableModel() {
            super(Product.class);
            mData = new ArrayList<Product>();
            mData.add(new Product("Frontline Small", 5, 1));
            mData.add(new Product("Frontline Medium", 10, 2));
            mData.add(new Product("Frontline Large", 15, 1));
            mData.add(new Product("Frontline Extra Large", 20, 2));
            mData.add(new Product("Frontline spuitbus", 7.5, 3));
            cNames = new ArrayList<String>();
            cNames.add("Product");
            cNames.add("Prijs");
            cNames.add("Aantal stuks beschikbaar");
            setDataAndColumnNames(mData, cNames);
            setColumnClass(0, String.class);
            setColumnClass(1, Double.class);
            setColumnClass(2, Integer.class);
        public Object getValueAt(final int rowIndex, final int columnIndex) {
            switch (columnIndex) {
                case 0:
                    return mData.get(rowIndex).getDescriction();
                case 1:
                    return mData.get(rowIndex).getPrice();
                case 2:
                    return mData.get(rowIndex).getNumber();
            return null;
        @Override
        public Class getColumnClass(int column) {
            return super.getColumnClass(column);
    private static void createAndShowGUI() {
        //Create and set up the window.
        JFrame frame = new JFrame();
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        Tabel newContentPane = new Tabel();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    public static void main(final String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
class Product {
    private String descriction;
    private double price;
    private int number;
    Product(final String descriction, final double price, final int number) {
        this.descriction = descriction;
        this.price = price;
        this.number = number;
    public String getDescriction() {
        return descriction;
    public void setDescriction(final String descriction) {
        this.descriction = descriction;
    public int getNumber() {
        return number;
    public void setNumber(final int number) {
        this.number = number;
    public double getPrice() {
        return price;
    public void setPrice(final int price) {
        this.price = price;
    @Override
    public String toString() {
        return descriction + ", " + price + ", " + number;
}

Sales quote layout rows doubled in crystal report layout

Dear All,
Sales quote layout rows doubled in crystal report layout.
In sales quote layout the rows are doubled. Even in the standard layout. If the quote contains only two rows. Then it is doubled as 4 rows in the crystal report layout.
It is happening in the particular database. Other database are working fine. I request you people to help me to overcome this issue.
Regards,
Siva

Hi Siva,
If this is regarding CR in SAP B1 then please repost to the SAP Business One Application space.
-Abhilash

Single row in alv report

Hi experts...
I want single row in alv report.
I have use loop for fatch data into internal table using loop when i am passing data in alv report then the data comes according loop. i want onlu one data in alv row.
how can i do such, plz help me.

decleare two internal table.
read table itab into wa index 1.
append wa to itab2.
pass itab2 only one record display.

Field should not display in the subtotal row in ALV report after sorting .

we have a requirement, after sorting and subtotaling, the output in ALV is -
vbeln        amount1 amount2 amount3
123           11              12            13
123           12             13             14
123           23             25             27
133           11              12            13
133           12             13             14
133           23             25             27
Now the customer wants the ALV outpput in this fashion -
123           11              12            13
123           12             13             14
                 23             25             27    --->123 (vbeln) should not come in subtotaling row
133           11              12            13
133           12             13             14
                  23             25             27--->133(vbeln) should not come in subtotaling row

Hi,
if it helps you could create a hierachy. In this way you can define the field catalog for the lines and for the subtotal columns. The only thing is that you would always show the subtotal rows.
You have references of hierachy alvs in
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c060fcb4-2c62-2b10-d2b2-f32407a5cc6f
ALV Hierarchy
alv hierarchy
In this case it also sorts
Sorting for ALV hierarchy
I hope it helps.
Edited by: Oscar Pecharroman on Aug 2, 2010 1:13 PM

Discoverer Report Row Total

We are running Oracle BI Discoverer Viewer version 11.1.1.4.0. When we upgraded to this version we lost some functionality. In the previous version the report displayed the number of rows the query returned. Now the row totals display only under certain conditions. For instance, I have a inventory report name INV-REP-120 and it prompts the user for 6 parameters & displays 6 columns of data. One of the parameters is named ‘Keyword' and I’ll use this one in the problem description. When I set the keyword parameter to ‘HINGE’ The bar at the top of the results sheet it displays:
‘Rows 1-25 of 81, Columns 1-6 of 9’
When I change the keyword to ‘TUBE’ the viewer displays:
‘Rows 1-25, Columns 1-6 of 9’
The total rows are not displayed but the number of pages. It appears that if the total number of rows is less than 200 then the row total is displayed. I changed the rows displayed from 25 to 100 and scrolled down to the last page and now the reports displays:
‘451 – 458 of 458, Columns 1-6 of 9’
When I use the key word TEE I get :
‘Rows 1-50, Columns 1-6 of 9’
There are 596 tees, which would be about 12 pages of 50 rows. I noticed that at the top of table there is a field ‘Page 1 of 5.’ It looks like if there are more than 5 pages it does not display the total number of rows.
There seems to be some interaction between the total number of rows the number of rows per page and perhaps a setup on the back-end that determines whether or not the row total is displayed. How can I configure the viewer at the front-end and/or back-end to consistently display the row total for a report? Is there a Discoverer preference located in the pref.txt in the apps server that controls this?

Hi,
You can inform to your SP to edit the table EUL4_documents
and ask him to modify the name of the report that is stored in the column DOC_NAME .There is absolutely no necessary to open the work book that is stored in the database and change the work book name
Regards
Swamy!

Classic report - Condition evaluated for every row

APEX 4.2.2
I am seeing something strange in a classic report region. A report started to fail at run-time with a strange error about bad syntax. When I run the page in debug mode, I see the following
print column headings
rows loop: 30 row(s)
...Execute Statement: begin wwv_flow.g_boolean := '' is not null;
end;
......Result = false
...Execute Statement: begin wwv_flow.g_boolean := '' is not null;
end;
......Result = false
...Execute Statement: begin wwv_flow.g_boolean := 'string with a embedded ' single quote' is not null;
end;
......Result = true
Looks like the APEX engine is evaluating a boolean expression after rendering and each and every row in the report. And for some strange reason, it is using a piece of data from my query's resultset and failing because of the bad syntax introduced due to the single-quote in the string.
I have never seen this before. Any idea what is going on?
Thanks

Howdy Paul, sorry should have provided all the details. No, this is a standard generic column template. Ah, you are right, drat I should have looked closer. The template has use a condition to show either a highlighted row or normal one. Sorry for the false alarm, I can take it from here. Enjoy your flight :-)

Opening and Closing values on two separate rows for an indvidual A/c?

Hi / Salam To all SAP Members,
I am creating a COGS report in which i need to show opening and closing values for a stock account in two separate rows. The tool i am using is report painter.
What i need to know is how can the system identify between opening and closing values for that account? Which characteristic/s do i need to include in the rows? The table i am using is FAGLFLEXT.
Please provide help.
Regards,
Mohammed Ali Khan.

Resolved Issue.

How to get multiple records in one row and different column

Hi All,
I am using oracle database 11g
and i have a two tables table_1, table_2
table_1 having columns
emp_no
first_name
middle_name
last_name
email
and table_2 having columns
emp_no
phone_type
phone_number
and having entires
emp_no phone_type phone_number
1001 MOB 9451421452
1001 WEMG 235153654
1001 EMG 652341536
1002 MOB 9987526312
1003 WEMG 5332621456
1004 EMG 59612356
Now i want the output of values with phone type as MOB or WEMG in a single row with different columns
emp_no first_name middle_name last_name email mobile officeno
1001 mark null k [email protected] 9451421452 235153654
1002 john cena gary [email protected] 9987526312 null
1003 dany null craig [email protected] null 5332621456
1004 donald finn sian [email protected] null null
can i have any inputs to achive this???
Regards
$sid

Frank Kulash wrote:
sonething like this:Frank, you missed aggregate function (pivot requires one). However main thing is it will cause ORA-01748:
with table_1 as (
                 select 1001 emp_no,'mark' first_name,null middle_name,'k'last_name,'[email protected]' email from dual union all
                 select 1002,'john','cena','gary','[email protected]' from dual union all
                 select 1003,'dany',null,'craig','[email protected] null' from dual union all
                 select 1004,'donald','finn','sian','[email protected]' from dual
     table_2 as (
                 select 1001 emp_no,'MOB' phone_type,9451421452 phone_number from dual union all
                 select 1001,'WEMG',235153654 from dual union all
                 select 1001,'EMG',652341536 from dual union all
                 select 1002,'MOB',9987526312 from dual union all
                 select 1003,'WEMG',5332621456 from dual union all
                 select 1004,'EMG',59612356 from dual
SELECT     *
FROM     table_1      t1
JOIN     table_2      t2 ON t1.emp_no = t2.emp_no
PIVOT     (    max(t2.phone_number)
     FOR t2.phone_type IN ( 'MOB'   AS mob
                             , 'WEMG' AS wemg
        FOR t2.phone_type IN ( 'MOB'   AS mob
ERROR at line 19:
ORA-01748: only simple column names allowed hereYou need to:
with table_1 as (
                 select 1001 emp_no,'mark' first_name,null middle_name,'k' last_name,'[email protected]' email from dual union all
                 select 1002,'john','cena','gary','[email protected]' from dual union all
                 select 1003,'dany',null,'craig','[email protected] null' from dual union all
                 select 1004,'donald','finn','sian','[email protected]' from dual
     table_2 as (
                 select 1001 emp_no,'MOB' phone_type,9451421452 phone_number from dual union all
                 select 1001,'WEMG',235153654 from dual union all
                 select 1001,'EMG',652341536 from dual union all
                 select 1002,'MOB',9987526312 from dual union all
                 select 1003,'WEMG',5332621456 from dual union all
                 select 1004,'EMG',59612356 from dual
     table_3 as (
                 select t1.emp_no,first_name,middle_name,last_name,email,
                         phone_type,phone_number
                   FROM     table_1      t1
                   LEFT JOIN     table_2      t2 ON t1.emp_no = t2.emp_no
SELECT     *
FROM     table_3
PIVOT     (    max(phone_number)
     FOR phone_type IN ( 'MOB'   AS mob
                             , 'WEMG' AS wemg
    EMP_NO FIRST_ MIDD LAST_ EMAIL                     MOB       WEMG
      1004 donald finn sian [email protected]
      1003 dany        craig [email protected] null            5332621456
      1001 mark        k     [email protected]      9451421452 235153654
      1002 john   cena gary [email protected]    9987526312
SQL>SY.

How I can display the values in one row when they come from the same colum

This query
SELECT
sorints_ints_code
FROM
saturn.sorints a,
connman.cc_adm_prospect_master
WHERE
sorints_ints_code like 'Z%'
and sorints_pidm = prospect_pidm
give me the results of
ZA
ZB
ZC
I want to use this query in a cursor to update a column in another table, the problem is that I need to update the table concatenating the values ZA,ZB,ZC
I have 24 different codes stored in the column sorints_ints_code, so I don’t want to use 24 different cursors and I don’t to use cross reference, It is there any way that I DON’T know to display the data like this za,zb,zc without using cross reference, I don’t want to use the table 24 times…
Like THIS, this is only for two values…
SELECT
a.sorints_ints_code,
b. sorints_ints_code
FROM
saturn.sorints a,
saturn.sorints b
connman.cc_adm_prospect_master
WHERE
a.sorints_ints_code = ‘ZA’
AND a.sorints_ints_code = ‘ZB’
and a.sorints_pidm = prospect_pidm
and b.sorints_pidm = prospect_pidm
REMEMBER, I have 24 different values
I am trying to write a procedure like this;
Someone suggest this v_int_code1 := v_int_code1||interest_coach_rec.sorints_ints_code;
BUT IT IS NOT WORKING!!!
PROCEDURE prospect_coach_interest_upd
p_prospect_term_code IN srbrecr.srbrecr_term_code%TYPE,
p_prospect_admin_err_code OUT VARCHAR2,
p_ora_err_code OUT NUMBER,
p_ora_err_msg OUT VARCHAR2
) IS
v_out_path VARCHAR2(40) := '/home/connman/student';
v_out_file VARCHAR2(40) := 'cc_adm_prospect_'||p_prospect_term_code||'_'||TO_CHAR(SYSDATE,'YYYYMMDDHH');
v_file_handle UTL_FILE.FILE_TYPE;
v_pidm NUMBER;
v_int_code1 varchar2(30);
v_int_code2 varchar2(2);
v_int_code3 varchar2(2);
CURSOR cur_pidms IS
SELECT prospect_pidm
FROM connman.cc_adm_prospect_master
WHERE prospect_term_code = p_prospect_term_code
FOR UPDATE;
CURSOR interest_coach_cur is
SELECT
sorints_ints_code
FROM
saturn.sorints
WHERE
sorints_ints_code like 'Z%'
and sorints_pidm = v_pidm ;
interest_coach_rec interest_coach_cur%ROWTYPE;
BEGIN
UTL_FILE.FCLOSE_ALL;
v_file_handle := UTL_FILE.FOPEN (v_out_path, v_out_file, 'a');
UTL_FILE.PUT_LINE (v_file_handle,
CHR (10) || TO_CHAR (SYSDATE, 'DD-MON-YYYY HH:MI:SS')
UTL_FILE.PUT_LINE (v_file_handle, 'Entering the Admin Name procedure.');
--- BEGIN
FOR rec_pidms IN cur_pidms
LOOP
EXIT WHEN cur_pidms%NOTFOUND;
v_pidm := rec_pidms.PROSPECT_pidm;
v_int_code1 := v_int_code1||interest_coach_rec.sorints_ints_code;
IF interest_coach_cur%ISOPEN
THEN
CLOSE interest_coach_cur;
END IF;
OPEN interest_coach_cur;
FETCH interest_coach_cur
INTO interest_coach_rec;
IF interest_coach_cur%FOUND
THEN
UPDATE
connman.cc_adm_prospect_master
SET
PROSPECT_COACH_INTEREST = interest_coach_rec.sorints_ints_code
WHERE CURRENT OF cur_pidms;
END IF;
END LOOP;
COMMIT;
p_prospect_admin_err_code := '0';
UTL_FILE.put_line (v_file_handle, 'Successful Completion.');
EXCEPTION
WHEN OTHERS
THEN
p_prospect_admin_err_code := '1';
p_ora_err_msg := SUBSTR (SQLERRM, 1, 2000);
p_ora_err_code := SQLCODE;
END; -- prospect_coach_interest_upd;

Search in the forum or web you will find many solutions
Return multi-row result as one comma-delimited row
http://www.oracle-developer.net/display.php?id=412

How can I display "detailStamp" facet selectively for rows in a table ?

Hi,
My JDEV version is Studio Edition Version 11.1.1.5.0
I am trying to display "detailStamp" facet selectively .
If I read api in link below
http://docs.oracle.com/cd/E26098_01/apirefs.1112/e17488/oracle/adf/view/rich/component/rich/data/RichTable.html
Use the "detailStamp" facet on the Table to include a collapsable content area for each table row. Please note that the height of the open detail area will be a set height based on the height of the detailStamp component. Adding a component that changes in height (like showDetail or panelBox) will by default produce strange results when the detailStamp component's height changes.
Detail Stamp can be selectively displayed for rows in the table by EL binding the "rendered" attribute of the "detailStamp" facet to "true" or "false". The EL binding can contain references to the table "var" attribute since during rendering it will be executed in the context of the row. Disclosure icon is displayed only for rows which have rendered="true".
I can see that i can achieve it by setting rendered property for that facet. BUT this property is not available in Studio Edition Version 11.1.1.5.0

Hi Frank.
Thanks for your quick reply .
But I am using Studio Edition Version 11.1.1.5.0 . In this version the property RENDERED of f:facet name="detailStamp" is NOT allowed.
Edited by: user13764942 on Feb 7, 2013 5:48 AM
Put in another way , I want to render the "detailStamp" facet selectively for rows , so for that I need the RENDERED property of "detailStamp" facet. This property is ONLY available in Jdev version 11.2 . I am using Jdev 11.1.1.5.0 so I need some alternative to RENDERED property as this property is NOT available in Jdev 11.1.1.5.0.
Please suggest some way to achieve this behaviour of displaying "detailStamp" facet selectively ....
Thanks!
Edited by: Mangpal Singh on Feb 7, 2013 11:57 PM

No rows dba_stmt_audit_opts

Similar Messages

Maybe you are looking for