No storage space available for extending an internal table.
Hi All,
I am using Function Module : VC_I_GET_CONFIGURATION in FI related Sales Order Report to get
configuration data for fields Model/Engine and Line no.
when the program executed in Production environment, It is giving Runtime Error TSV_TNEW_PAGE_ALLOC_FAILED.
ShrtText : No storage space available for extending an internal table.
The termination occurred in the ABAP program "SAPLIBINF" in "SELECT_INSTANCES_01" . its all happening
in the above FM.
Is there any possibility to get configuration data (Model/Engine and Line no) with out using FM.
please advise me on how you would like to proceed related to this issue.
Thanks & Regards
Satish Reddy
Hi Satish,
Please go through the below links and see if you can use this to address your issue,
http://wiki.sdn.sap.com/wiki/display/ABAP/ReplacementofVC_I_GET_CONFIGURATIONforperfomance+tunning
VC_I_GET_CONFIGURATION and paging memory
Regards,
Chen
Edited by: Chen K V on May 26, 2011 2:34 PM
Similar Messages
-
Short dump - No more storage space available for extending an internal tabl
Hi All,
I have requirement in which my program generates a text file on my presentation server. Here my problem is, this requirement can not be executed in back ground, it should be done in foreground only. When I execute in foreground, if the data records comes to some 38 lacks then I am getting a short dump saying 'No more storage space available for extending an internal table'.
And in dump analysis under WHAT HAPPENED section it is giving as
' What happened? |
| You attempted to extend an internal table, but the required space was |
| not available.
Please suggest me, what I have to do in this case?
Thanks in advance.
Thanks,
Sudha MettuHi SuDash,
Allocation of the memory spaces will be done by BASIS people.
you can contact them..
Regards! -
Short dump -No more storage space available for extending an internal table
Hi All,
While running one program I get the short dump saying
"No more storage space available for extending an internal table "IT_862".
Error Analysis given in the dump log :
The internal table "IT_862" could not be enlarged further.
To extend the internal table, 14656 bytes of storage space was
needed, but none was available. At this point, the table "IT_862" has
8528862 entries.
Source Code Extract :
003360 loop at t_line.
003370 clear t_output.
003380
003390 * Increment Line counter
003400 add 1 to l_line_cnt.
003410
003420 t_output-object = t_stxh-tdobject.
003430 t_output-id = t_stxh-tdid.
003440 t_output-spras = t_stxh-tdspras.
003450 t_output-name = t_stxh-tdname.
003460 t_output-line = l_line_cnt.
003470 t_output-format = t_line-tdformat.
003480 t_output-text = t_line-tdline.
*> append toutput. " ERROR POINT*
Can you please suggest what can be the possible solution for the above error.
Thanks in advance.
SanjeetHi
Check out this thread:
Re: No storage space available for extending the internal table
Make sure you are not having an infinite loop.
Hope this helps
Regards,
Jayanthi.K -
Error-No more storage space available for extending an internal table.
Hi Experts,
i am facing problem in a program . its showing runtime error.
Short text
No more storage space available for extending an internal table.
its showing error at
IF sy-subrc NE 0.
REFRESH p_wip_tab.
ELSE.
i_wip_tab-pspnr = i_internal_and_external-pspnr_prps.
LOOP AT p_wip_tab.
MOVE-CORRESPONDING p_wip_tab TO i_wip_tab.
==> APPEND i_wip_tab.
ENDLOOP.
ENDIF.
DATA: l_billable_tab LIKE p_billable_tab OCCURS 0 WITH HEADER LINE,
p_wip_tab LIKE zpswip OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF i_wip_tab OCCURS 0,
pspnr LIKE prps-pspnr.
INCLUDE STRUCTURE zpswip.
DATA: pernr_name LIKE pa0002-vorna,
END OF i_wip_tab.
How i can resolve this problem if anybody knows it then please reply me as soon as possible.
ThanksHello.
Probably you fill the internal table with too much data and it cannot hold that much.
You can either redesign the program so that it processes the data in batches of, say 100000 records, or contact your BASIS team and ask for their help. They could possible assign more memory to the running applications.
Reward if helpful.
Regards,
George -
Getting Dump "No more storage space available for extending an internal table" ??
Hi All,
In Web Ui while i was click save, it taking too much of time for saving at all lost it throwing dump such as "No more storage space available for extending an internal table". Recently Basis side did some activities for storing day to day transaction in back up server, after this activities i am getting this problem. i opening that Bsp component it throwing some information message such as component not integrated, i didn't see that message properly but i clicked continue button. After that basis activity only i got that information message once.
i dont know what is the issue. Can anyone give solution for this issue
Thanks,
AnbuAsk your basis guys to clean up the system memory. This is happening because no memory is left.
~Kavindra -
Dump -- No more storage space available for extending an internal table
In Our system we are getting this dump
No more storage space available for extending an internal table
and because of it no user is able to login into the system.
We have Some classes in the system and we have defined shared memories to all classes according to regions.
So for a particular class means users of a region are not able to logon to systems and we are getting these dumps in the system.
So please suggest first how to clear the shared memory & how to conclude what activity in system made the shared memory full.
Regards,
Shivam MittalMy OS is HP-UNIX..
And we do not access on OS level,So please suggest the way to clear it from SAP level.
In dump it is also mentioned:
The internal table "\AREA=<Name>\INSTANCE=$DEFAULT_INSTANCE$\VER
SID=2\OBJ={O:1.2*\CLASS=<CLASS>\DATA=GT_BUFFER[1]-DATA" could
not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "\AREA=<Name>\INST=$DEFAULT_INSTANCE$\CLNT=100"
Row width: 156
Number of rows: 0
Allocated rows: 63
Newly requested rows: 1216 (in 19 blocks)
Please also suggest what is the internel table name that is causing the issue.
Regards,
Shivam Mittal -
BW..No more storage space available for extending an internal Table
Hi;
In function module - RSAR_TRFC_DATA_RECEIVED
During Data loading from ERP to BW client am getting an error in SM58 in ERP as ""No more storage space available for extending an internal Table "".
There is a dump in BW system TSV_TNEW_PAGE_ALLOC_FAILED
"".I checked all the parameters for roll area,paging , etc..everything is fine. Also tried with packet size smaller ..still i am getting this error ..
Thanks & regards
seethyhi thanks for the response....
Memory parameters are fine
em/initial_size_MB 2048 EM/TOTAL_SIZE_MB 21679 em/global_area_MB 256 Ztta/roll_area 6500000
ztta/roll_first 1
ztta/roll_extension 2000000000
rdisp/ROLL_MAXFS 32768
rdisp/PG_MAXFS 32768
rdisp/ROLL_SHM 16384
rdisp/PG_SHM 16384
abap/heap_area_dia 2000000000
abap/heap_area_nondia 2000000000
abap/heap_area_total 4000000000
i have checked with Less data selection. still error occurs
regards
seethy -
Error Message - No storage space available for extending an internal table
i have written this code where i think there is a performance issue as well.
Error - You have attempted to extend an internal table but the required space was not available.
IF GT_OUTTAB IS NOT INITIAL.
SELECT ZRMVIEW~ARBPL
ZRMVIEW~GSTRS
ZRMVIEW~GSUZS
ZRMVIEW~GLUZS
ZRMVIEW~GLTRS
ZRMVIEW~VERID
ZCRHDV1~KTEXT1
INNER JOIN CRHD_V1 AS ZCRHDV1
ON ZRMVIEWMANDT = ZCRHDV1MANDT
AND ZRMVIEWWERKS1 = ZCRHDV1WERKS
FOR ALL ENTRIES IN GT_OUTTAB
WHERE AUFNR = GT_OUTTAB-BID.
ENDSELECT.
ENDIF.
IF SY-SUBRC EQ 0.
LOOP AT GT_OUTTAB .
READ TABLE GT_PRV_OUTAB WITH KEY WERK = GT_OUTTAB-WERK.
MOVE-CORRESPONDING GT_PRV_OUTAB TO GT_OUTTAB.
APPEND GT_OUTTAB.
ENDLOOP.
ENDIF.
GT_OUTTAB contains the structure for the table COCH.
And to read this select statement it takes lot of time.
please provide me proper inputs for the same.
thanks,Hi Shanky S
LOOP AT GT_OUTTAB .
READ TABLE GT_PRV_OUTAB WITH KEY WERK = GT_OUTTAB-WERK.
MOVE-CORRESPONDING GT_PRV_OUTAB TO GT_OUTTAB.
APPEND GT_OUTTAB.
ENDLOOP.
You are looping at gt_outtab and appending it within the same loop. Since everytime a new entry is appended into the gt_outtab int table and thus it'll lead to an infinite loop.
Try something like by creating an itab of similar structure as gt_outtab:
LOOP AT gt_outtab into wa_outtab (work area).
MOVE-CORRESPONDING wa_outtab into wa_outtab1.
APPEND wa_outtab1 to gt_outtab1.
ENDLOOP.
LOOP AT GT_OUTTAB .
READ TABLE GT_PRV_OUTAB WITH KEY WERK = GT_OUTTAB-WERK.
MOVE-CORRESPONDING GT_PRV_OUTAB TO GT_OUTTAB1.
APPEND GT_OUTTAB1.
ENDLOOP.
Now use gt_outtab1 in your code going furthur.
Hope this helps.
Harsh -
Hi
Im SAP-BW Consultant. I need some code in the transfer rules. But while im loading data , im getting "No more storage space available for extending an internal table.
Pls check my code and modify it so that i can load the data of 5,000,00 records
TYPES: BEGIN OF tys_TG_1,
/BIC/ZIUTILICH TYPE /BIC/OIZIUTILICH,
/BIC/ZIRGRCH TYPE /BIC/OIZIRGRCH,
/BIC/ZPRODUCT TYPE /BIC/OIZPRODUCT,
END OF tys_TG_1.
TYPES: tyt_TG_1 TYPE STANDARD TABLE OF tys_TG_1
WITH NON-UNIQUE DEFAULT KEY.
data: e_s_result type tys_TG_1.
data: e_t_result type tyt_TG_1.
DATA : ITAB1 TYPE STANDARD TABLE OF /BIC/AZDSO_HYD00.
DATA : WA_ITAB TYPE /BIC/AZDSO_HYD00.
loop at RESULT_PACKAGE into e_s_result.
Select /BIC/ZIUTILICH /BIC/ZIRGRCH /BIC/ZPRODUCT FROM /BIC/AZDSO_HYD00 INTO
(e_s_result-/BIC/ZIUTILICH,
e_s_result-/BIC/ZIRGRCH,
e_s_result-/BIC/ZPRODUCT)
WHERE
COMP_CODE = e_s_result-COMP_CODE AND
PROFIT_CTR = e_s_result-PROFIT_CTR .
append e_s_result to e_t_result.
endselect.
clear e_s_result.
ENDLOOP.
refresh RESULT_PACKAGE.
move e_t_result[] to RESULT_PACKAGE[].
So im getting TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending an internal table..
I think there is a problem in the code. pls look it and modify it.
Regards
kumarHello Kumar,
The amount of data you can store in an internal table is limited by the width of the table together with the available memory on your machine. If you try to put too much data in your table you'll always get that problem.
As I see it you have a table RESULT_PACKAGE with some fields and based on the entries in that table you select one row out of another table.
You can easily use
Select
/BIC/ZIUTILICH /BIC/ZIRGRCH
/BIC/ZPRODUCT FROM
/BIC/AZDSO_HYD00
INTO TABLE e_t_result
FOR ALL ENTRIES in RESULT_PACKAGE
COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
That still doesn't solve your memory problem hence you should try to process the data in packages, because you obviously don't have enough memory to process all data at once.
You can add the following:
Select
/BIC/ZIUTILICH /BIC/ZIRGRCH
/BIC/ZPRODUCT FROM
/BIC/AZDSO_HYD00
INTO TABLE e_t_result
PACKAGE SIZE xxxx
FOR ALL ENTRIES in RESULT_PACKAGE
COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
PROCESS your data here
ENDSELECT.
You might also want to discuss the issue with your basis team if there is a way to get more memory if there is no way to do that process.
Hope that helps,
Michael -
F.05 : No more storage space is available for extending an internal table
Hi,
While executing F.05(FCV), I am getting ABAP Run time Error which is as below
Short Text: No more storage space is available for extending an internal table
Pls, Give me solution and get more points. It is very urgent
Thanks in advance
Akashcall your sap basis guys
i don't need any points -
Statistics setup for 2LIS_11 and no storage space available internal table
Hi, I am running statistical setup for 2LIS_11_VAITM. It ran for 10 hours and failed with an ABAP run time error. The error is "no storage space available for extending an internal table". For 11 application, the selection options is sales org, company code and sales document. We have tried twice, and already drilled down to the level of sales org and company code, but still with error.
The only option is sales documents.
The volume of the data is 16 million records around in VBAP table which needs to be in the setup table.
What is the criteria to categorize the sales document.
Can we use order types? We have 200 values in the order types. And I am not sure the document ranges in each order type is clearly defined and not overlapping each other, so that we could load those in the setup table.
Please advise!! Or if you have other suggestions!
Thanks!Hi
It could be because of main memory problem... so Restrict your selections and do the statistical setup
by the way how many comp codes you have? restrict with comp codes or doc ranges
Thanks, -
Lack of storage space while extending an internal table
Hi,
While executing a select statement my program is giving dump.
<b>ShrtText </b>
No storage space available for extending an internal table.
<b>What happened? </b>
You attempted to extend an internal table, but the required space was
not available.
<b>Error analysis</b>
The internal table "IT_49" could not be enlarged further. To allow
error handling, the table had to be deleted before this log was
created. So, if you branch to the ABAP debugger from the display
of this log, the table will there be displayed with 0 rows.
At the moment of the termination, the following data was
determined for the respective internal table:
Storage location: "Session memory"
Row width: 7936
Number of rows: 1594
Allocated rows: 1594
Newly requested rows: 2 (in 1 blocks)
Please let me know how to solve this problem.
Thanks in advance
SureshHi Suresh ,
The problem is with the statement where you select the data from the table
SELECT QID "Queue identification (unique key)
TRANS "Transaction counter: Batch input, statistics
BLOCK "Message counter: Batch input, statistics
SEGMT "Queue data segmentation number
MSGCOUNT "Queue data block number
VARLEN "Queue data length of user data
VARDATA
"Long String Used to Store BDC Objects in the Database
FROM APQD
INTO TABLE IT_APQD
FOR <b>ALL ENTRIES IN I_APQD</b>
WHERE QID = I_APQD-QID
AND TRANS = I_APQD-TRANS.
Please refer the how the FOR ALL ENTRIES CONCEPT works.
if still the problem exists then try using the addition PACKAGE SIZE in your select statement , what this does is insted of write all the selected data at once into the internal table it will append in packets of size specified by you.
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/fc/eb39eb358411d1829f0000e829fbfe/frameset.htm">Click here for Help on using Package Size in select statement</a>
Thanks
Arun -
Error on extend an internal table, but the required space was not available
Hi All,
I am trying to retrieve cost data from COVP tables, as well as the quantity, cost centre, and price unit fields from MSEG / BSEG tables. Thing is, if the AWTYP value in COVP table = 'MKPF', i have to get the data from MSEG, otherwise, I need to get it from BSEG table.
I kept getting this error message:
<i>You attempted to extend an internal table, but the required space was not available.</i>
Anyone have any idea how to make my codes more efficient?
Please help. Thanks!
Regards,
Cecilia
REPORT ZMISCY004.
TABLES : COVP, BSIS, BSEG, MSEG, MAKT, CSKU.
PARAMETERS :
P_FILE(300) DEFAULT '\sapdcdatasaprptoh.txt' LOWER CASE.
DATA MSG_TEXT(50).
DATA :
XKOKRS LIKE COVP-KOKRS,
XBELNR LIKE COVP-BELNR,
XBUZEI LIKE COVP-BUZEI,
XGJAHR LIKE COVP-GJAHR,
XPERIO LIKE COVP-PERIO,
XWKGBTR LIKE COVP-WKGBTR,
XWTGBTR LIKE COVP-WTGBTR,
XREFBN LIKE COVP-REFBN,
XREFBZ LIKE COVP-REFBZ,
XKSTAR LIKE COVP-KSTAR,
XBEKNZ LIKE COVP-BEKNZ,
XMATNR LIKE COVP-MATNR,
XBUKRS LIKE COVP-BUKRS,
XREFGJ LIKE COVP-REFGJ,
XREFBK LIKE COVP-REFBK,
XLTEXT LIKE CSKU-LTEXT,
XMAKTX LIKE MAKT-MAKTX,
XAWTYP LIKE COVP-AWTYP,
XTWAER LIKE COVP-TWAER,
XSGTXT LIKE COVP-SGTXT,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : BEGIN OF ITAB_COVP OCCURS 10,
KOKRS LIKE COVP-KOKRS,
BELNR LIKE COVP-BELNR,
BUZEI LIKE COVP-BUZEI,
GJAHR LIKE COVP-GJAHR,
PERIO LIKE COVP-PERIO,
WKGBTR(15) TYPE C,
WTGBTR(15) TYPE C,
REFBN LIKE COVP-REFBN,
REFBZ(3) TYPE C,
KSTAR LIKE COVP-KSTAR,
BEKNZ LIKE COVP-BEKNZ,
MATNR LIKE COVP-MATNR,
BUKRS LIKE COVP-BUKRS,
REFGJ LIKE COVP-REFGJ,
REFBK LIKE COVP-REFBK,
LTEXT LIKE CSKU-LTEXT,
MAKTX LIKE MAKT-MAKTX,
AWTYP LIKE COVP-AWTYP,
TWAER LIKE COVP-TWAER,
SGTXT LIKE COVP-SGTXT,
BSIS_WRBTR(13) TYPE C,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : END OF ITAB_COVP.
SELECT M1~KOKRS
M1~BELNR
M1~BUZEI
M1~GJAHR
M1~PERIO
M1~WKGBTR
M1~WTGBTR
M1~REFBN
M1~REFBZ
M1~KSTAR
M1~BEKNZ
M1~MATNR
M1~BUKRS
M1~REFGJ
M1~REFBK
M1~AWTYP
M1~TWAER
M1~SGTXT
M4~KOSTL
M4~MENGE
M4~MEINS
INTO (XKOKRS,
XBELNR,
XBUZEI,
XGJAHR,
XPERIO,
XWKGBTR,
XWTGBTR,
XREFBN,
XREFBZ,
XKSTAR,
XBEKNZ,
XMATNR,
XBUKRS,
XREFGJ,
XREFBK,
XAWTYP,
XTWAER,
XSGTXT,
MSEG_KOSTL,
MSEG_MENGE,
MSEG_MEINS
FROM COVP AS M1
LEFT OUTER JOIN MSEG AS M4
ON M1~REFBN = M4~MBLNR AND M1~REFBZ = M4~ZEILE AND M1~REFGJ = M4~MJAHR
WHERE M1~SCOPE = 'OCOST' AND M1~AWTYP = 'BKPF'
OR M1~SCOPE = 'OCOST' AND M1~AWTYP = 'MKPF'
OR M1~KSTAR = '972022'.
IF XAWTYP = 'BKPF'.
SELECT KOSTL MENGE MEINS INTO (BSEG_KOSTL, BSEG_MENGE, BSEG_MEINS) FROM
BSEG WHERE BELNR = XREFBN AND BUZEI = XREFBZ AND GJAHR = XREFGJ AND
BUKRS = XREFBK.
ENDSELECT.
MOVE BSEG-KOSTL TO BSEG_KOSTL.
MOVE BSEG-MEINS TO BSEG_MEINS.
MOVE BSEG-MENGE TO BSEG_MENGE.
ELSE.
MOVE ' ' TO BSEG_KOSTL.
MOVE ' ' TO BSEG_MEINS.
MOVE ' ' TO BSEG_MENGE.
ENDIF.
*GET LTEST
SELECT LTEXT INTO XLTEXT
FROM CSKU
WHERE KTOPL = 'COAA' AND SPRAS = 'EN'.
*GET MAKTX
IF XMATNR <> ' '.
SELECT SINGLE * FROM MAKT WHERE MATNR = XMATNR.
MOVE MAKT-MAKTX TO XMAKTX.
ELSE.
MOVE ' ' TO XMAKTX.
ENDIF.
MOVE : XKOKRS TO ITAB_COVP-KOKRS,
XBELNR TO ITAB_COVP-BELNR,
XBUZEI TO ITAB_COVP-BUZEI,
XGJAHR TO ITAB_COVP-GJAHR,
XPERIO TO ITAB_COVP-PERIO,
XWKGBTR TO ITAB_COVP-WKGBTR,
XWTGBTR TO ITAB_COVP-WTGBTR,
XREFBN TO ITAB_COVP-REFBN,
XREFBZ TO ITAB_COVP-REFBZ,
XKSTAR TO ITAB_COVP-KSTAR,
XBEKNZ TO ITAB_COVP-BEKNZ,
XMATNR TO ITAB_COVP-MATNR,
XBUKRS TO ITAB_COVP-BUKRS,
XREFGJ TO ITAB_COVP-REFGJ,
XREFBK TO ITAB_COVP-REFBK,
XLTEXT TO ITAB_COVP-LTEXT,
XMAKTX TO ITAB_COVP-MAKTX,
XAWTYP TO ITAB_COVP-AWTYP,
XTWAER TO ITAB_COVP-TWAER,
XSGTXT TO ITAB_COVP-SGTXT,
BSEG_KOSTL TO ITAB_COVP-BSEG_KOSTL,
BSEG_MEINS TO ITAB_COVP-BSEG_MEINS,
BSEG_MENGE TO ITAB_COVP-BSEG_MENGE,
MSEG_KOSTL TO ITAB_COVP-MSEG_KOSTL,
MSEG_MENGE TO ITAB_COVP-MSEG_MENGE,
MSEG_MEINS TO ITAB_COVP-MSEG_MEINS.
APPEND ITAB_COVP.
CLEAR ITAB_COVP.
ENDSELECT.
ENDSELECT.
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC NE 0.
WRITE: 'File cannot be opened. Reason:', MSG_TEXT.
EXIT.
ENDIF.
LOOP AT ITAB_COVP.
TRANSFER ITAB_COVP TO P_FILE.
ENDLOOP.
CLOSE DATASET P_FILE.Cecilia - I think your problemn is a nested select:
*GET LTEST
SELECT ltext INTO xltext
FROM csku
WHERE ktopl = 'COAA' AND spras = 'EN'.
*GET MAKTX
IF xmatnr <> ' '.
SELECT SINGLE * FROM makt WHERE matnr = xmatnr.
MOVE makt-maktx TO xmaktx.
ELSE.
MOVE ' ' TO xmaktx.
ENDIF.
MOVE : xkokrs TO itab_covp-kokrs,
etc.
mseg_meins TO itab_covp-mseg_meins.
APPEND itab_covp.
CLEAR itab_covp.
ENDSELECT.
Do you need to do the inner select for every cost element text?
Rob -
I purchased more storage space(10gb)for my IPAD,but when I attempted to download an app an error message prompted me to purchase more storage.According to my ICloud I have 15gbavailable Any suggestions Help!!!
If you are trying to download an app and get an error about not enough memory, it's talking about memory on your iPad, not in iCloud. I don't know what you mean by purchasing more storage space for your iPad, you can't add more memory to a device. You may have bought more memory in iCloud, but that's not going to fix your current problem. You need to delete songs or video, or some other large files from your iPad to make room for a new download.
-
No PXA storage space available at the moment.
Dear All,
When I am doing delivery or Reverse the delivery (T.Codes VL09, VL01N), in Client 800, it is going to ABAP dump. Please see below. Please help me in this.
Runtime Errors PXA_NO_FREE_SPACE
Date and Time 22.11.2011 19:44:13
Short dump has not been completely stored (too big)
Short text
No PXA storage space available at the moment.
What happened?
The current ABAP/4 program had to be terminated because there
was no space available to load it.
Each ABAP/4 program to be executed is stored in a central
storage area that is divided between all users.
This area was too small to hold all currently active programs for all
users.
Resource bottleneck
The current program "SAPLMCB1" had to be terminated because
a capacity limit has been reached.
Error analysis
Unable to load a program of 1169408 bytes.
The PXA ('program execution area') was too small to hold all
currently active programs for all users.
At present, the size of the PXA is set at 144868 Kbytes.
The largest contiguous and unlocked memory chunk has 592896 bytes.
Trigger Location of Runtime Error
Program SAPLMCB1
Include LMCB1F20
Row 200
Module type (FORM)
Module Name LIS_VERBUCHUNG
Source Code Extract
Line SourceCde
170 xmcbest = xmcbest.
171 ENDIF.
172 IF flg_v2 NE space.
173 * V2-Verbuchung starten
174 CALL FUNCTION 'MCB_STATISTICS_UPD_V2' IN UPDATE TASK
175 EXPORTING
176 zeitp = con_zeitp
177 TABLES
178 xmcmseg = xmcmseg
179 xmcbest = xmcbest.
180
181 ENDIF.
182 IF flg_b NE space.
183 * V3-Verbuchung starten
184 CALL FUNCTION 'MCB_STATISTICS_UPD_V3' IN UPDATE TASK
185 EXPORTING
186 zeitp = con_zeitp
187 TABLES
188 xmcmseg = xmcmseg
189 xmcbest = xmcbest.
190
191 ENDIF.
192 IF flg_bw NE space.
193 SET EXTENDED CHECK OFF.
194 * Preparation for new update process (plug-in system).
195 * See note 486784.
196 DATA if_release TYPE i. "interface release
197 if_release = 1.
198 PERFORM mcex_if_release_03 IN PROGRAM saplmcex CHANGING if_release
199 IF FOUND.
>>>>> IF if_release >= 2.
201 CALL FUNCTION 'MCEX_UPDATE_CALL_03'
202 EXPORTING
203 zeitp = con_zeitp
204 contr = hlp_control
205 i_update_task = 'X'
206 TABLES
207 xmcbest = xmcbest
208 xmcmseg = xmcmseg.
209 ELSE.
210 CALL FUNCTION 'MCEX_UPDATE_03' IN UPDATE TASK
211 EXPORTING
212 zeitp = con_zeitp
213 contr = hlp_control
214 TABLES
215 xmcbest = xmcbest
216 xmcmseg = xmcmseg.
217 ENDIF.
218 SET EXTENDED CHECK ON.
219 ENDIF.
Regards,
Rao.Hi,
For error
Runtime Errors PXA_NO_FREE_SPACE
For this look for increasing the SAP profile parameter value abap/buffersize
Hope this helps.
Regards,
Deepak Kori
Maybe you are looking for
-
Lync 2013 Front End SIP/2.0 500 Compression algorithm refused
I've deployed a brand new Lync 2013 environment hosted on Windows Server 2012 R2 that is currently in co-existence mode with my Lync 2010 environment. I have SCOM 2012 monitoring the environment and it recently started reporting that one or more of
-
Close the open Sales Orders.
Dear All, We have created Sales Order against FGO Scheme for 76 Pkts and FGO material 3 Pkts, out of that we have despatched 50 Pkts only. Now we want to close open order, but field of order quantity is made gray hence we are unable to update the qua
-
Ipod 30gb - error message while converting cds
So I just got a 30gb Ipod. I tried to rip cds into Itunes, but I was getting error messages saying "Itunes can not convert song". So a friend suggested that it was the computer I was on. Last night I restored my Ipod on my laptop, tried to convert a
-
I am unable to get an audio for incoming text messages on my iphone 4 can any one help
I have had my iphone 4 for several years now and all of a sudden I no longer have an audio play when I recieve an incoming text message. Can anyone help please? Thanks in advance.
-
I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?