No template found creating Tabs and Processes in HR Flexible Performance UI

Dear Experts
We will be using EHP4 Flexible Performance UI.
I have created the sample performance template in PHAP_CATALOG and have transported this to our DEV playpen client.
Within the config Master client I want to configure the u201CDefine Tabs and Process Configuration for Templateu2019 IMG node and after I log in it takes me to the web dynpro screen u201CWeb dynpro ABAP configuration for Appraisalsu201D, I get the error u201CNo template foundu201D.
When I check the Help it says 1) to check the template has been created and 2) that the template has been released
I checked and the template does exist in PHAP_CATALOG and has been released.
Has anyone encountered this problem and has a way to fix this?
Thanks
Oliver

Hi Maurice,
Thanks for your quick reply.
Yes the template has been definitely released.
Yes Iu2019m using the same user to create the template and trying to do the process tabs u2013 I have SAP ALL Access.
Also, when I transport this template from the DEV master client - to a DEV unit test client I can actual run the process template setupu2026u2026u2026u2026.
Developer has checked the code and DEV Master client is the same as DEV Unit test clientu2026u2026u2026.interesting.
Have you ever come across the issue where the source client where template has been created and released that you could not create the process tabs?
Any other ideas how I could solve this?
Many thanks
Oliver

Similar Messages

Define Tabs and Process Configuration for Template (HAP_TA_CONF)

I am currently building a new appraisal template for my client and I have configured the process timeline in the development system via the IMG node Define Tabs and Process Configuration for Template (transaction code HAP_TAB_CONF).
Does anyone know how to transport the tabs and process configuration through the system landscape?
We are on SAP ECC 6.0 Enhancement Pack 4

Hi Sushil,
I have used the report RHMOVE30 as you recommended and it worked perfectly in one run. I did not have to create custom relationships. I simply selected all the Process Item (VH) objects for my appraisal template and ran the report.
Many thanks for your help. It has saved me having to configure the tabs and process timeline in each client.
Janet

Define Tabs and Process Configuration for Template

Hi All
I would like to give the local HR the ability to define Tabs and Process Configuration for Template
The only way I can find to create these definitions is using SPRO and I don't want to give HR users SPRO
Is there a transaction which will allow the HR users to define Tabs and Process Configuration for Template?
Thanks
Maya

You can try this URL:
http://server.domain:port/sap/bc/webdynpro/sap/hap_configuration?WDCONFIGURATIONID=HAP_AC_TAB_CONF
Just change server, domain and port to match your SAP instance.

Performance Mgmt - Define tabs and process configuration for templates

Hi,
I would like to utlize the feature of process/phase/step configuration for appraisals by the Web Dynpro configuration for tab and process. I choose the "Process Configuration" tab, enter my appraisal template and period, and click "Start Selection". A warning is displayed "No process defined for <my appraisal template>". Clicking on "Add" and no matter what I did, I don't seem to be able to maintain any process/phase/step into the "Configure Available Elements for Process" table. What is the pre-requisite to maintain and configure the Process/Phase/Step(s) ?
How do I maintain the in preparation, in planning etc statuses in here, I created templates using SAP defined templates for ex: templates for performance feedback etc., statuses are maintained in there by default.
Can you please suggest anything?
Thanks
Murthy

>
Munna wrote:
> Hi,
>
> I would like to utlize the feature of process/phase/step configuration for appraisals by the Web Dynpro configuration for tab and process. I choose the "Process Configuration" tab, enter my appraisal template and period, and click "Start Selection". A warning is displayed "No process defined for <my appraisal template>". Clicking on "Add" and no matter what I did, I don't seem to be able to maintain any process/phase/step into the "Configure Available Elements for Process" table. What is the pre-requisite to maintain and configure the Process/Phase/Step(s) ?
>
> How do I maintain the in preparation, in planning etc statuses in here, I created templates using SAP defined templates for ex: templates for performance feedback etc., statuses are maintained in there by default.
>
> Can you please suggest anything?
>
> Thanks
> Murthy
Hi Munny, I am experiencing the same condition. I have released my template and when I go thru the IMG to the 'Define Tabs & Process Configuration' selection I get the browser screen for setting up the tabs and process. I click on the Process tab and see the screen but the New and Delete buttons are not active (grey'ed out). I toggled my review template (cancelled release and re-released) to see if it changed the symptoms but it did not.
All - are there other conditions that must be met before setting up the Process steps vis the IMG ? I have all of the Status/substatus config complete and it shows up in the right side, but I cannot add anything to the left side to define the process.
Chris Thomas
Duke University

Appraisal- "Define Tabs and Process Configuration for template"

Hi Experts,
I am looking for implementation of Flexible template. However, I am unable to do so because "Define Tabs and Process Configuration for template" config node is not available even though we have activated business functions HCM_OSA_CL_1 and HCM_OSA_CL_2. We are in EHP 5 SPlevel 44.
Please help.

1. Check with Business Function CA_HAP_CI_1 ..first go through the documentation of the Business Function.
2.Check with BC Sets is activated or not through tcode SCPR20PR...If it not activated then activate with Tcode SCPR20..
BC Sets for HR
EA-HR-MENU
EA-HR-AKH
EA-HR-IMG
Mohan

Performance Management - Transporting "Define Tabs and Process config"

Good Morning Experts,
We are moving from Development into our PPT (pre-production test) environment and have successfully transported the Performance management category settings/values, as well as the Template itself.
Upon executing the Performance Management toolset from the portal side, I see that my tab configuration for the template did not transport. I have searched high and low for any reference to transporting this config step, but have been unsuccessful, thus this post.
Does anyone have any suggestions for transporting this configuration. As you know the IMG Personnel Management > Personnel Development > Objective Setting and Appraisals > Define Tabs and Process Configuration for Template launches a webdynpro app to make this configuration step, so saving these setup selections is the only option. How can I force these changes across ? I look forward to your responses !
Chris Thomas
Duke University and Health System

All - the solution:
SAP Note 1428054, implement the corrections according to the note.
Run the report, RHHAP_Transport_tab_config which will generate the transport containing entries from tables:
hrhap_tab
hrhap_tab_data
hrhap_tab_t
Basis implemented, I ran report, transported the tabs and and all is well.
Chris

Tabs and Process configuration - PMS

Dear Experts,
We're on EHP4 and using flexible performance management system. I would like to know if there is any possibility/settings by which I can uncheck the default tab. i.e. of Element type " Appraisal template" present under the config node "Define Tabs and Process Configuration for Template" .
Regards,
Sachin

Hi Sachin
Did you get the solution for your problem?
I have a similar requirement , is it possible to hide the default Appraisal tab?

Ways of creating contract and process flow of contracts

hi friends
ways of creating contract and process flow of contracts
thanks for ur help
regards
krishna

hi,
In the MM Purchasing component, a contract is a type of outline purchase agreement against which release orders (releases) can be issued for agreed materials or services as and when required during a certain overall time-frame.
Contracts can take the following forms:
Quantity contracts
Use this type of contract if the total quantity to be ordered during the validity period of the contract is known in advance. The contract is regarded as fulfilled when release orders totaling a given quantity have been issued.
Value contracts
Use this type of contract if the total value of all release orders issued against the contract is not to exceed a certain predefined value. The contract is regarded as fulfilled when release orders totaling a given value have been issued.
You can also set up corporate buying contracts with your vendors. These are valid for all plants and company codes within a client (see Centrally Agreed Contract).
You can create a contract as follows:
Manually
You enter all data relating to the contract manually.
Using the referencing technique
As reference document (the document you copy from), you can use:
Purchase requisitions
RFQs/quotations
Other contracts
CREATION OF CONTRACT MANUALLY:
Choose Outline agreement --> Contract --> Create(ME31K)
The initial screen appears.
Enter the necessary data. If you make any specifications under the group heading Default data, this data will appear as the default data in each item.
In the Agreement type field, specify whether you are creating a quantity or value contract, for example.
Press ENTER .
The header data screen appears.
Enter the contract validity period. Check the other fields on this screen and make any necessary changes (e.g. the terms of payment) and define the header conditions.
Press ENTER .
The item overview screen appears.
On this screen, enter the information for each item (material number, target quantity, price, receiving plant, or account assignment, etc.) using the same procedure as with purchase orders.
Material without a master record: leave the field for the material number empty and enter the following:
u2013 Short description of the relevant material or service in the Short text field
u2013 Material group to which the material belongs, in the Material group field
u2013 Account assignment category
You can enter u (unknown) or the category of an account assignment.
u2013 The target quantity and the order unit
If you specify an account assignment category other than U (field A), you must enter the relevant account assignment data for the item. To do so, choose Item ® Account assignments (see also Account Assignment).
If necessary, review the details for each item. Select the item(s) to review. Then select Item -> Details.
Enter the desired conditions.
Enter further text for the item if any additional instructions to the vendor or Goods Receiving are necessary. Choose Item -> Texts -> Text overview.
Save the contract.
Hope it helps..
Regards
Priyanka.P
AWARD IF HELPFULL
Edited by: Priyanka Paltanwale on Aug 25, 2008 7:20 AM

The version 6.0.2 doesn't create tabs, and my journal doesn't save!

The version 6.0.2 doesn't create tabs, and my journal doesn't save!

I am not sure how it was done in 5.0.1 so I can't comment on that. I know that since 5.1.1, the runtime engine is nothing but .dlls.
There is another way. Have someone create a generic EXE file. Then run this generic EXE. (What I mean by generic is that you do not specify any VI when you create the application.) It will prompt you to select a file when you run the executable. You can then browse to your VI and have it run that way.
I am not sure if you'll need any license by doing it this way... What I'm suggesting here is a way for you to have an executable like what you've described. Maybe you could talk to a NI application engineer or your sales person to have them create you the generic EXE.
I am not sure about software distribution. Y
our sales person would be the one that you talk to about that. The NI Developer Suite or LabVIEW PDS is something to consider if you're planning on distributing your applications.
Thanks.
Shan Pin Koh

I would Like Muse to allow me to create tabs and text leaders within text boxes

I created a web site for a client of mine that includes a price list. My client wanted the price of each item to be consistently aligned. This is something easy to do in Adobe Illustrator and InDesign (for example) but surprisingly not possible within Muse.
Widget................................................$8
Product...............................................$8
I ended up manually creating a leader using periods (see example above) however the numbers aren't perfectly aligned because Individual text characters have varying, inconsistent widths. Those varying widths are not compensated by adding or reducing an additional period thereby causing a price list that appears slightly jagged in its alignment. This is especially prevalent in long lists.
The use of tabs with leaders would be the the solution to this problem.

Did you ever see nice tabs and text leaders in any web page ? Probably not, because they don't properly exist in html and css. It's difficult then for the Muse team to develop a feature that has no technical basis.
There is some rudimentary tab technique in the works of the W3C, but the current browser support is poor. Muse could offer some make-shift method (with fixed spaces or characters) but this is not compliant with the principles of html.
I'd rather want the team to bring out tables, and use these in stead of tabs. (Tables are pretty well available in html, since 1993...)

Clicking/switching tabs and menus has sluggish/slow performance.

Clicking or switching through tabs has sluggish performance. Going through Menus and Options is sluggish too even with one blank tab opened. I doubt that it is my laptop because browsing through files and folders is fast and immediate. Google Chrome has a huge difference in performance.

Having the same problem. After LOTS of clicking and experimenting, here's what I think I've found:
# The tab performance when not maximized was much better.
# Outside of safe mode, the Add-ons tab appears to be FAR more sluggish than any other tab. No specific extension or plugin is slowing it down. It simply lags.
# Switching between Mozilla sites seems to be slightly sluggish compared to switching between tabs for other sites
# Disabling the "Tab Utilities" extension (ithinc) made the performance when maximized equivalent to the non-maximized performance. This leads me to believe that the difference between the two is caused by this plugin. The Add-ons Manager tab, and Mozilla sites were still relatively slower.
# Disabling all other extensions offered no additional improvement, but, strangely, starting in safe mode did. While inside safe mode everything is super snappy.
# I have a sizable list of extensions, including a large number of disabled extensions (most of which I can't "remove" because they are from 3.6)
The time periods on #5 are very small, on the order of perhaps 80-100 milliseconds. Just long enough that you do a double take and wonder if it was really slower, or just your imagination, but then when you compare against changing tabs in chrome, it's clear that you aren't crazy. There is no noticable difference between safe mode and Chrome, but there IS between non-safe-with-everything-disabled and Chrome.
Is it possible that this is caused by some sort of broadcast to all plugins about the tab change? If so, could this broadcast be completed asynchronously, or else AFTER the tab switch? This is really a perception issue. To feel "fast" to the user, the click should result in instant visual feedback. If my plugins want to know something about the change, I'm satisfied with letting them wait until after '''I''' find out about it.

Create Tabbed and Accordion Panels | Adobe Muse Feature Tour | Adobe TV

Organize lengthy information in more visually appealing, “bite-sized” chunks by using fully customizable tabbed or accordion panels.
http://adobe.ly/I5cQoV

After working with the accordion panels I've found it's about 1,000 times easier to develop your content outside the panels: selections inside of the panels is wonky at best.

HAP_CONFIGURATION for Tab and Process Configuration in Apprisal

Hello Experts,
HAP_CONFIGURATION application is generating a dump while creating Process Configuration. On click of the save button this dump is coming.
We have applied the sap note " 1387269 " but still the short dump is occurring. I have debugged the application but not sure why this dump is coming.
Please help in this regard.
ERROR : "Screen output without connection to user"
Function: TRINT_POPUP_EDIT_CANCEL_SHOW of program SAPLSTRD
Form: RAISE_ERROR of program SAPLSTRD
Function: TRINT_OBJECTS_CHECK_AND_INSERT of program SAPLSTRD
Function: TR_OBJECTS_CHECK of program SAPLSTRD
Function: RH_HRPOBJECT_CORR_AT_SAVE of program SAPLRHWM
Form: UPDATE_PLOG of program SAPLRHAP
Function: RH_UPDATE_DATABASE of program SAPLRHAP
Function: HRHAP_C_VH_CREATE of program SAPLHRHAP_C_IF_PROCESS
Function: HRHAP_RFC_C_VH_CREATE of program SAPLHRHAP_IF_RFC
Method: PROCESS_CREATE of program CL_HAP_WD_CONFIG_UI===========CP
Thanks
Pradeep

You may use customization files (for each env, you should have separate customization file) for replacing env values among envs. Please refer -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15867/customization.htm#CACJCAGD
Regards,
Anuj

System status for IDOC creation and processing for production orders

All
I am creating IDOCs for production orders to send requirements to an external WM system for kitting execution.
I need to know whether there are any system statuses to notify me when an IDOC has been created,failed and processed. If not, how do I go about creating user defined statuses for these statuses.
Second question, which idocs should I use to confirm, teco and cancel the production orders from an external system?
Thanks
Evan

HI Evan
u can use the standard program - RBDMOIND scheduled in back ground to update the Idoc staus ,
this helps to update the IDoc Status from
'03 Data passed to port OK ' to
'12 Dispatch OK'
status 03 indicates the IDoc is successfully transmitted to Communication Layer and the Status 12 helps to confirm the data dispatch to the receiving port.

System status or user status for IDOC creation and processing for prod ord

All
I am creating IDOCs for production orders to send requirements to an external WM system for kitting execution.
I need to know whether there are any system statuses to notify me when an IDOC has been created,failed and processed. If not, how do I go about creating user defined statuses for these statuses.
Second question, which idocs should I use to confirm, teco and cancel the production orders from an external system?
Thanks
Evan

For the first part of your query refer to the technical forums.
For the second part - refer to Idoc - LOIPRO01, it has a segment for Order status, that should be of interest.
Attn Moderators
I think it would be better to move this thread to a technical forum, so the requester can get the most relevant information.

No template found creating Tabs and Processes in HR Flexible Performance UI

Similar Messages

Maybe you are looking for