No Timeout Target Assigned to ______ Timeout Ignored!

Sorry if this has been answered, I searched "timeout ignored" and hit zero. And I am under the gun here to figure this out.
I am hitting this Log note: No Timeout Target Assigned to ____ Timeout Ignored!
I have two Menu canvases with one still photo per canvas.
Ideally I would like them to Time Out — go black — after a set time (so as to avoid screen burn in).
Does this Log note warning have anything to do with that?
Any info will be appreciated, if this normal or something I need to figure out and correct...

You can set the timeout action to a black menu (or perhaps a motion menu with the word press here with button moving so movie can continue).
But if you set the menu to timeout and did not set an action to not set you would get that message

Similar Messages

Each target assigned to a job must have a setting and destination.

Simple. Basic Question.
Trying to use Compressor to change the codec on my flip cam to make it more compatible with FCP X.
I have dragged a source and destination into the batch. But it keeps giving me the error "Each target assigned to a job must have a setting and destination." I saw others had this same issue and the solution I saw was to set a destination for the video AND audio. How do you assign for BOTH? I thought it was just a drag and drop method into batch ...

You didn't say what your settings were. But tif it's not one of the DVD presets, you shouldn't ordinarily be faced with separate audio and video streams with the majority of presets. Here's an example of a batch with one source file, multiple targets and multiple destinations. Only the DVD Preset has separate audio and video…and those do require that destinations be specified. If the destination is not specified, it defaults to Source.
Good luck.
Russ

JDBC / JTA Timeouts : How to set a timeout on the fetching of a query ?

Hi !
I'm working on an Application running on Weblogic Server 11g. This app executes a query on an Oracle 11g database ...
The problem is that this query returns millions of records ... and the app fetches the results during tens of minutes.
We would like to set a timeout, wich will abandon the transaction, hang the database connection, destroy the socket ... or anything else ...
This timeout will prevent the thread to become in STUCK state and stucking the weblogic managed server.
Is this possible ?
Thank's for your answers.
Steve.
Edited by: 966918 on 10 avr. 2013 07:18

Abandon timeout will not help. That is only used if a database crashes during the second phase of commit. It specifies how long the transaction manager should keep trying to complete the transaction.
JTA timeout will only work if you are using XA datasources and two-phase commit transactions. When the timeout occurs, it guarantees that the transaction cannot be committed. Eventually, all of the participant resources will be notified and will not allow any more work to take place on the transaction. It does not stop the threads and the application must be written to handle exceptions appropriately.
Edited by: Steve Felts on Apr 17, 2013 8:32 AM

JTA transaction timeout vs. EJB transaction timeout

Hi,
can anybody tell me if the JTA transaction timeout, e.g. <JTA
Name="myServer" TimeoutSeconds="60"/> works for EJBs as default transaction
timeout if none is given in the deployment descriptor.
I assumed that this is correct, and tried to test this by setting the
JTA-timeout value to 1 (second). However I experienced no timeout exceptions
in our logfile with this setting.
Regards
Andi
+49 69 263-87303, [email protected]

Thanks, Rob
"Rob Woollen" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
This should work fine in 6.1 and 7.0. I believe it was broken in 6.0
-- Rob
Andreas Bittorf wrote:
Hi,
can anybody tell me if the JTA transaction timeout, e.g. <JTA
Name="myServer" TimeoutSeconds="60"/> works for EJBs as default
transaction
timeout if none is given in the deployment descriptor.
I assumed that this is correct, and tried to test this by setting the
JTA-timeout value to 1 (second). However I experienced no timeoutexceptions
in our logfile with this setting.
Regards
Andi
+49 69 263-87303, [email protected]

Get current target, assign to object?

I have an object which extends MovieClip. There are multiple instances created of it on the stage.
The handler for the click event is:
private function hotSpotClickHandler(e:Event):void {
// make a mask that matches the size and position of the hot spot clicked on
makeMask(e.currentTarget.width,e.currentTarget.height,e.currentTarget.x,e.currentTarget.y) ;
I was looking for a way to not have to type e.currentTarget... every time. I tried adding a line:
var obj:Object = new Object(e.current.target)
so I could just say obj.width, obj.height etc. But this did not work since e.current.target returns two parameters [object MovieClip].
How could I accomplish this?

Should be
var obj:Object = e.currentTarget;
trace(obj.width);
trace(obj.height);
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Audio in 'Video Transistions'. Possible?? How? Help Quick! Deadline close!

Hey Gang,
I've built a fully custom Motion menu and I want to use transitions I've created in Motion as well when the buttons are clicked. This calls for compressing it to a video format and using the "Video Transistions" part of the transition tab, I'm assuming. But I have sound that goes along with it and it doesn't seem to want to use the sound within the file.
I tried just making the transition another track it goes to before the track the button was intended for, but there's a huge long heart attack before it gets to the transition (maybe a full second) which is why I needed the transition in the first place.
Help!! I have a deadline on this in 48 hours!
G5 Quad Mac OS X (10.4.7)

Hey snooch,
if you built motion menus and transitions in another application (like in AE or Motion), you DO NOT need to use the transition tab of the menu.
you can do this in one of two ways:
you can put you motion menu in menu space as you normally would, assign everything, loop points, whatever; then you would place your custom motion menu transition in another new menu. all you have to do is then assign the button IN the motion menu TO the transition. make sure that you timeout the transistion. the timeout should equal 0 seconds. also, you DO NOT have to create any buttons, or even use an overlay (sub picture) in your tansition. the ONLY thing you need is the background video. then in the connections tab, there will be an option called "Menu Timeout Target". assign this as you would any regular button.
the other way to what you want is to create your motion menu, assign buttons, whatever you have to do basically. then, in your video stream, place your menu transition that is associated with the button press (assuming if the transition goes to video) and THEN place your regular video and audio in the same stream.
both these options have pros and cons of course.
i personally would advise the first method, although there might be a slight jump/pause in the transtion.
of course, you can creat it this way, and to totally minize any jump and make the DVD much more smooth (as in when the seek time and such), you can opt to use a VIDEO_TS modifier such as DVD after edit or myDVDedit. DVDafteredit is payware, but conforms to DVD spec much more strictly than myDVDedit.
myDVDedit is free though.
both apps have a very steep learning curve.
**as a side note, i use BOTH of these applications, BOTH have pros and cons i love both!
Mikey m.

ISE 1.1 - switch ignores "Session-Timeout"

hi all,
I'm playing around with ISE guest service and have some difficulty with Time Profiles.
After guest logs in, Radius attributes are sent to the switch (3750G) one of them is Session-Timeout which should be similar to 1h (DefaultOneHour)
According to ISE logs and switch debugs, ISE did it well and this attribute was sent but it seems that the switch simply ignores it.
May 24 07:03:11.658: %SEC-6-IPACCESSLOGP: list ACL-DEFAULT denied udp 10.1.100.194(1029) -> 10.1.100.2(389), 1 packet19:46:57: RADIUS: COA received from id 36 10.1.100.6:64700, CoA Request, len 18319:46:57: RADIUS/DECODE: parse unknown cisco vsa "reauthenticate-type" - IGNORE19:46:57: RADIUS/ENCODE(00000000):Orig. component type = Invalid19:46:57: RADIUS(00000000): sending19:46:57: RADIUS(00000000): Send CoA Ack Response to 10.1.100.6:64700 id 36, len 3819:46:57: RADIUS: authenticator 0B 30 6E 9B DF 97 0D A0 - D9 8B A5 5A 11 39 3E 4119:46:57: RADIUS: Message-Authenticato[80] 18 19:46:57: RADIUS:   11 42 82 E2 52 68 DF 28 CD 43 AE 88 0C 5D 91 10            [ BRh(C]]19:46:57: RADIUS/ENCODE(00000026):Orig. component type = Dot1X19:46:57: RADIUS(00000026): Config NAS IP: 0.0.0.019:46:57: RADIUS(00000026): Config NAS IPv6: ::19:46:57: RADIUS/ENCODE(00000026): acct_session_id: 2719:46:57: RADIUS(00000026): sending19:46:57: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.619:46:57: RADIUS(00000026): Send Access-Request to 10.1.100.6:1812 id 1645/25, len 26719:46:57: RADIUS: authenticator 6D 92 DC 77 87 47 DA 8E - 7D 6B DD DD 18 BE DC 3319:46:57: RADIUS: User-Name           [1]   14 "0016d329042f"19:46:57: RADIUS: User-Password       [2]   18 *19:46:57: RADIUS: Service-Type        [6]   6   Call Check                [10]19:46:57: RADIUS: Vendor, Cisco       [26] 31 19:46:57: RADIUS:   Cisco AVpair       [1]   25 "service-type=Call Check"19:46:57: RADIUS: Framed-IP-Address   [8]   6   10.1.100.194 19:46:57: RADIUS: Framed-MTU          [12] 6   1500 19:46:57: RADIUS: Called-Station-Id   [30] 19 "00-24-F9-2D-83-87"19:46:57: RADIUS: Calling-Station-Id [31] 19 "00-16-D3-29-04-2F"19:46:57: RADIUS: Message-Authenticato[80] 18 19:46:57: RADIUS:   AD EB 99 4A F2 B9 4E BB 2E B3 E2 04 BE 5B 0C 72             [ JN.[r]19:46:57: RADIUS: EAP-Key-Name        [102] 2   *19:46:57: RADIUS: Vendor, Cisco       [26] 49 19:46:57: RADIUS:   Cisco AVpair       [1]   43 "audit-session-id=0A01280100000016043E0D23"19:46:57: RADIUS: NAS-Port-Type       [61] 6   Ethernet                  [15]19:46:57: RADIUS: NAS-Port            [5]   6   50107 19:46:57: RADIUS: NAS-Port-Id         [87] 22 "GigabitEthernet1/0/7"19:46:57: RADIUS: Called-Station-Id   [30] 19 "00-24-F9-2D-83-87"19:46:57: RADIUS: NAS-IP-Address      [4]   6   10.1.100.1 19:46:57: RADIUS(00000026): Sending a IPv4 Radius Packet19:46:57: RADIUS(00000026): Started 5 sec timeout19:46:57: RADIUS: Received from id 1645/25 10.1.100.6:1812, Access-Accept, len 27219:46:57: RADIUS: authenticator F1 5F 57 72 FD 80 95 20 - 46 47 B5 CE DF 63 6E 1A19:46:57: RADIUS: User-Name           [1]   19 "[email protected]"19:46:57: RADIUS: State               [24] 40 19:46:57: RADIUS:   52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 41 [ReauthSession:0A]19:46:57: RADIUS:   30 31 32 38 30 31 30 30 30 30 30 30 31 36 30 34 [0128010000001604]19:46:57: RADIUS:   33 45 30 44 32 33            [ 3E0D23]19:46:57: RADIUS: Class               [25] 49 19:46:57: RADIUS:   43 41 43 53 3A 30 41 30 31 32 38 30 31 30 30 30 [CACS:0A012801000]19:46:57: RADIUS:   30 30 30 31 36 30 34 33 45 30 44 32 33 3A 69 73 [00016043E0D23:is]19:46:57: RADIUS:   65 2F 31 32 34 30 33 36 37 39 31 2F 32 39 37   [ e/124036791/297]19:46:57: RADIUS: Session-Timeout     [27] 6   2940 19:46:57: RADIUS: Termination-Action [29] 6   0 19:46:57: RADIUS: Message-Authenticato[80] 18 19:46:57: RADIUS:   26 46 2C B6 75 95 AF 37 E6 3B B1 CB F2 70 E0 8D           [ &F,u7;p]19:46:57: RADIUS: Vendor, Cisco       [26] 72 19:46:57: RADIUS:   Cisco AVpair       [1]   66 "ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-Contractors-ACL-4fbcd736"19:46:57: RADIUS: Vendor, Cisco       [26] 42 19:46:57: RADIUS:   Cisco AVpair       [1]   36 "profile-name=Microsoft-Workstation"19:46:57: RADIUS(00000026): Received from id 1645/2519:46:57: RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNOREMay 24 07:03:19.132: %MAB-5-SUCCESS: Authentication successful for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D23May 24 07:03:19.132: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D23May 24 07:03:19.140: %EPM-6-POLICY_REQ: IP 10.1.100.194| MAC 0016.d329.042f| AuditSessionID 0A01280100000016043E0D23| AUTHTYPE DOT1X| EVENT APPLYMay 24 07:03:19.165: %EPM-6-AAA: POLICY xACSACLx-IP-Contractors-ACL-4fbcd736| EVENT DOWNLOAD-REQUEST19:46:57: RADIUS/ENCODE(00000000):Orig. component type = Invalid19:46:57: RADIUS(00000000): Config NAS IP: 0.0.0.019:46:57: RADIUS(00000000): sending19:46:57: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.619:46:57: RADIUS(00000000): Send Access-Request to 10.1.100.6:1812 id 1645/26, len 14419:46:57: RADIUS: authenticator 1A 52 18 C5 25 A7 5C DC - 29 C9 5C 7C C5 B3 FC 5819:46:57: RADIUS: NAS-IP-Address      [4]   6   10.1.100.1 19:46:57: RADIUS: User-Name           [1]   38 "#ACSACL#-IP-Contractors-ACL-4fbcd736"19:46:57: RADIUS: Vendor, Cisco       [26] 32 19:46:57: RADIUS:   Cisco AVpair       [1]   26 "aaa:service=ip_admission"19:46:57: RADIUS: Vendor, Cisco       [26] 30 19:46:57: RADIUS:   Cisco AVpair       [1]   24 "aaa:event=acl-download"19:46:57: RADIUS: Message-Authenticato[80] 18 19:46:57: RADIUS:   2B 6B 13 37 0D 25 11 E9 6A 56 35 D8 91 9F EF F0           [ +k7?jV5]19:46:57: RADIUS(00000000): Sending a IPv4 Radius Packet19:46:57: RADIUS(00000000): Started 5 sec timeoutMay 24 07:03:19.191: %SEC-6-IPACCESSLOGP: list ACL-DEFAULT denied tcp 10.1.100.194(2125) -> 10.1.100.6(8443), 1 packet19:46:57: RADIUS: Received from id 1645/26 10.1.100.6:1812, Access-Accept, len 35919:46:57: RADIUS: authenticator 31 B0 73 93 CA 0E 5C 7C - 11 29 AA 57 6C A1 53 D819:46:57: RADIUS: User-Name           [1]   38 "#ACSACL#-IP-Contractors-ACL-4fbcd736"19:46:57: RADIUS: State               [24] 40 19:46:57: RADIUS:   52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 61 [ReauthSession:0a]19:46:57: RADIUS:   30 31 36 34 30 36 30 30 30 30 30 30 35 44 34 46 [0164060000005D4F]19:46:57: RADIUS:   42 44 44 44 33 37            [ BDDD37]19:46:57: RADIUS: Class               [25] 49 19:46:57: RADIUS:   43 41 43 53 3A 30 61 30 31 36 34 30 36 30 30 30 [CACS:0a016406000]19:46:57: RADIUS:   30 30 30 35 44 34 46 42 44 44 44 33 37 3A 69 73 [0005D4FBDDD37:is]19:46:57: RADIUS:   65 2F 31 32 34 30 33 36 37 39 31 2F 32 39 38   [ e/124036791/298]19:46:57: RADIUS: Termination-Action [29] 6   1 19:46:57: RADIUS: Message-Authenticato[80] 18 19:46:57: RADIUS:   80 EF 5B 80 76 F1 C9 37 0B 25 34 37 10 57 CC 44          [ [v7?47WD]19:46:57: RADIUS: Vendor, Cisco       [26] 47 19:46:57: RADIUS:   Cisco AVpair       [1]   41 "ip:inacl#1=permit udp any any eq domain"19:46:57: RADIUS: Vendor, Cisco SW3750-1# [26] 48 19:46:57: RADIUS:   Cisco AVpair       [1]   42 "ip:inacl#2=permit ip any host 10.1.100.6"19:46:57: RADIUS: Vendor, Cisco       [26] 57 19:46:57: RADIUS:   Cisco AVpair       [1]   51 "ip:inacl#3=deny ip any 10.0.0.0 0.255.255.255 log"19:46:57: RADIUS: Vendor, Cisco       [26] 36 19:46:57: RADIUS:   Cisco AVpair       [1]   30 "ip:inacl#4=permit ip any any"19:46:57: RADIUS(00000000): Received from id 1645/26May 24 07:03:19.216: %EPM-6-AAA: POLICY xACSACLx-IP-Contractors-ACSW3750-1#SW3750-1#SW3750-1#L-4fbcd736| EVENT DOWNLOAD-SUCCESSMay 24 07:03:19.216: %EPM-6-POLICY_APP_SUCCESS: IP 10.1.100.194| MAC 0016.d329.042f| AuditSessionID 0A01280100000016043E0D23| AUTHTYPE DOT1X| POLICY_TYPE Named ACL| POLICY_NAME xACSACLx-IP-Contractors-ACL-4fbcd736| RESULT SUCCESSMay 24 07:03:20.147: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D2319:46:58: RADIUS/ENCODE(00000026):Orig. component type = Dot1X19:46:58: RADIUS(00000026SW3750-1#SW3750-1#SW3750-1#SW3750-1#): Config NAS IP: 0.0.0.019:46:58: RADIUS(00000026): Config NAS IPv6: ::19:46:58: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.619:46:58: RADIUS(00000026): Sending a IPv4 Radius Packet19:46:58: RADIUS(00000026): Started 5 sec timeout19:46:58: RADIUS: Received from id 1646/35 10.1.100.6:1813, Accounting-response, len 38SW3750-1#
SW3750-1#sh authe sess int g 1/0/7 Interface: GigabitEthernet1/0/7 MAC Address: 0016.d329.042f IP Address: 10.1.100.194 User-Name: [email protected] Status: Authz Success Domain: DATA Security Policy: Should Secure Security Status: Unsecure Oper host mode: multi-auth Oper control dir: both Authorized By: Authentication Server Vlan Group: N/A ACS ACL: xACSACLx-IP-Contractors-ACL-4fbcd736 Session timeout: N/A Idle timeout: N/A Common Session ID: 0A01280100000016043E0D23 Acct Session ID: 0x0000001B Handle: 0x2F000017Runnable methods list: Method   State mab      Authc Success dot1x    Not runSW3750-1#
Has anyone encountered similar thing?
I tried 12.2(58) and now Im testing
Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 15.0(1)SE2, RELEASE SOFTWARE (fc3)
but in both cases it is similar.
regards
Przemek

Hi Sebastian,
thx a lot those 2 commands solved the issue, my mistake. Now I can see remaining time for the session
SW3750-1#sh auth sess int g1/0/7 Interface: GigabitEthernet1/0/7 MAC Address: 0016.d329.042f IP Address: 10.1.100.194 User-Name: [email protected] Status: Authz Success Domain: DATA Security Policy: Should Secure Security Status: Unsecure Oper host mode: multi-auth Oper control dir: both Authorized By: Authentication Server Vlan Group: N/A ACS ACL: xACSACLx-IP-Contractors-ACL-4fbcd736 Session timeout: 28800s (server), Remaining: 28780s Timeout action: Terminate Idle timeout: N/A Common Session ID: 0A012801000000221DE0F555 Acct Session ID: 0x0000002B Handle: 0x99000023Runnable methods list: Method   State mab      Authc Success dot1x    Not run
regards
Przemek

TACACS+ timeout value ignored

I'm running ACS 3.3. I have a bunch of Catalyst 3550 and 3560 switches, some running IOS 12.1(19)EA1c and others running IOS 12.2(20)SE1.
All are configured for TACACS+ as follows:
aaa new-model
aaa authentication login default group tacacs+ line
aaa authentication enable default group tacacs+ enable
aaa authorization console
aaa authorization exec default group tacacs+ if-authenticated none
aaa authorization commands 15 default group tacacs+ if-authenticated none
aaa accounting exec default stop-only group tacacs+
aaa accounting commands 15 default stop-only group tacacs+
aaa accounting system default stop-only group tacacs+
tacacs-server host 10.1.1.1
tacacs-server timeout 2
tacacs-server directed-request
tacacs-server key CISCO
All works fine however the "timeout" value above seems to be ignored on switches running 12.2(20)SE1. It should be that if the TACACS+ server (10.1.1.1) goes down, the switch will fall back to using local authentication after 2 secs. However, it seems to be fixed at 30 secs.
Note that it works fine on 12.1(19)EA1c but always seems fixed at 30 secs on 12.2(20)SE1. This makes it really annoying when TACACS+ is unavailable and you're trying to configure a switch, especially if you're doing command authorization.
Wondering if anyone else has this problem and whether Cisco is aware of it?
Thanks.
PAUL G.

You are possibly running into CSCed76124 - Tacacs-server timeout value ignored. I guess you will need to track it for a workaround or consider using another IOS version not affected with this defect.

What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

Any call made from the API will automatically be set to the “Session Timeout” period, no matter
what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
Short Session Timeout and Session Timeout in Excel Services
Short Session Timeout and Session Timeout in Excel Services - Part 2
Sessions and session time-outs in Excel Services
above links are from old version but still applies to all.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Setting Adapter Timeout

Hello
I am having a File/FTP Adapter at my receiving end.I have noted that if a async msg is sent with Exactly Once option and if FTP server is down the message does not gets delivered but as soon as its up it gets delivered.
I just wanted to know how long Adapter keeps polling to the target directory? Can we set some specific timeout for adapter e.g. if FTP server does not comeup within 15 mins the adapter should timeout and message should fail. The message can then be sent manually.
Thanks in advance.
Regards
Rajeev Patkie

Ashu,
It is not only the JTA timeout which may cause transaction rollback. If JDBC and BPEL are involved then following timeouts also does matter and ideally all of them will be less than the JTA timeout -
1. XA connection timeout configured in data-source
2. Statement timeout configured in data-source
3. BPEL timeout - set property SyncMaxWaitTime (value in seconds) in the EM console
4. SOA EJB's timeout
Now question here should not be that which timeout is actually causing the transaction rollback, rather question should be that why a JDBC call is taking 300 seconds? What processing are you doing which is taking this much time?
Regards,
Anuj

Ata driver timeout and Solaris 10 10/08

Good day,
My Solaris 10 10/08 installation is suffering from ata driver timeouts. The error messages are exactly the same as those documented in OpenSolaris Bug ID 6586621 (abort request,abort device,reset target,reset bus,early timeout in quick succession followed by "Vendor 'Gen-ATA ' error code: 0x3".
The underlying disks are QEMU disks in a XenServer HVM and the VM has two CPUs. Since the disks are actually files on an underlying RAID 10 array that is reported as healthy by the RAID controller, I would exclude hardware faults (other VMs run faultlessly).
The suggestion at http://justindthomas.wordpress.com/2008/12/22/xenserver-5-and-opensolaris-0811/ regarding the disabling of DMA use by the ata driver has not been effective.
Any pointer is welcome. I would also appreciate an evaluaton of the validity to my case of workaround 5 suggested at http://docs.sun.com/app/docs/doc/820-5245/fhknh?a=view (Solaris 10 10/08 release notes).
Many thanks for any help.
Cheers!

From what I have seen these errors are generated from the dvd-rom (ide device) not coming online fully or failing during boot. Sometimes the errors go away with a simple reboot, but they might re-appear on the next reboot. The only sure way to resolve this issue is to disconnect the dvd drive.
I am trying to find a an alternative to physically disconnecting the dvdroms, looking for a way way to disable the dvd from being detected.

802.1x EAP-TLS with NPS/W2008 - Authentication result 'timeout'

Hello
[Env on my lab investigation]
supplicant - W7 with cert
authenticator - Catalyst 2960 with IOS 15.0(1)SE2 /newest/
authentication server 2x - W2008/NPS like a RADIUS server
[Config some part of authenticator]
interface FastEthernet0/1
switchport access vlan 34
switchport mode access
authentication event fail retry 1 action authorize vlan 47
authentication event server dead action authorize vlan 35
authentication event no-response action authorize vlan 47
authentication event server alive action reinitialize
authentication port-control auto
dot1x pae authenticator
dot1x timeout quiet-period 15
dot1x timeout tx-period 15
spanning-tree portfast
[Symptoms]
After reboot authenticator the supplican connected to FE0/1 finally put into the Guest VLAN 47 and before that I saw on the authenticators console Authentication result 'timeout', but when the switch is up and running the the same port authenticator FE0/1 the same supplicant W7 with cert now I connect to authenticator finally supplicant put into static VLAN 34.
[Summary]
The problem is the end station that are still connected to the supplicant port /use a EAP-TLS/ after the reboot supplicant! All of them will be put into the Guest VLAN instead of static VLAN 34!
[The question]
What is wrong and how to configure/tune and what authenticator or authentication server to prevent after the reboot to observe a authentication timeouts?
Of course the supplicant after 20 minutes /next EAPOL start farmet put into VLAN 34 .
[Logs]
During this I observed the wireshark supplicant and authenticator console and NPS wireshark, below:
1. supplicant and authenticator orderflow at wireshar:
- supplicant EAPOL Start
- authenticator EAP Request Identity
- supplicat Response Identity, 3 times
- supplicant EAPOL Start
- authenticator EAP Failure
- authenticator EAP Request Identity x2
- supplicat Response Identity x2
and again, more detail about flow from whireshar chart at the end
2. authenticator console saw like this:
*Mar 1 00:02:51.563: %DOT1X-5-FAIL: Authentication failed for client (5c26.0a12.cf80) on Interface Fa0/1 AuditSessionID 0A0E2E96000000030000EAF2
*Mar 1 00:02:51.563: %AUTHMGR-7-RESULT: Authentication result 'timeout' from 'dot1x' for client (5c26.0a12.cf80) on Interface Fa0/1 AuditSessionID 0A0E2E96000000030000EAF2
*Mar 1 00:02:51.563: %DOT1X-5-RESULT_OVERRIDE: Authentication result overridden for client (5c26.0a12.cf80) on Interface Fa0/1 AuditSessionID 0A0E2E96000000030000EAF2
krasw8021x>
*Mar 1 00:03:52.876: %DOT1X-5-FAIL: Authentication failed for client (5c26.0a12.cf80) on Interface Fa0/1 AuditSessionID 0A0E2E96000000030000EAF2
*Mar 1 00:03:52.876: %AUTHMGR-7-RESULT: Authentication result 'timeout' from 'dot1x' for client (5c26.0a12.cf80) on Interface Fa0/1 AuditSessionID 0A0E2E96000000030000EAF2
*Mar 1 00:03:52.876: %DOT1X-5-RESULT_OVERRIDE: Authentication result overridden for client (5c26.0a12.cf80) on Interface Fa0/1 AuditSessionID 0A0E2E96000000030000EAF2
and finaly
*Mar 1 00:05:00.286: %AUTHMGR-5-VLANASSIGN: VLAN 47 assigned to Interface Fa0/1 AuditSessionID 0A0E2E96000000040003C914
*Mar 1 00:05:01.167: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (Unknown MAC) on Interface Fa0/1 AuditSessionID 0A0E2E96000000040003C914
*Mar 1 00:05:01.302: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
3. Authentication server:
- NPS doesn'e recived any RADIUS Access-Request/Response.
[supplicant EAPOL flow chart, source wireshark]
|Time     | Cisco_f9:98:81                        | Dell_12:cf:80                         |
|         |                   | Nearest           |
|0,041    |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
|0,045    |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
|0,051    |                   |         Start     |                   |EAPOL: Start
|         |                   |(0)      <------------------ (0)      |
|0,065    |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
|0,075    |                   |         Response, Identity            |EAP: Response, Identity [RFC3748]
|         |                   |(0)      <------------------ (0)      |
|0,075    |                   |         Response, Identity            |EAP: Response, Identity [RFC3748]
|         |                   |(0)      <------------------ (0)      |
|18,063   |                   |         Start     |                   |EAPOL: Start
|         |                   |(0)      <------------------ (0)      |
|18,065   |         Failure   |                   |                   |EAP: Failure
|         |(0)      ------------------> (0)      |                   |
|18,268   |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
|18,303   |                   |         Response, Identity            |EAP: Response, Identity [RFC3748]
|         |                   |(0)      <------------------ (0)      |
|18,307   |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
|18,307   |                   |         Response, Identity            |EAP: Response, Identity [RFC3748]
|         |                   |(0)      <------------------ (0)      |
|37,073   |         Request, EAP-TLS [R           |                   |EAP: Request, EAP-TLS [RFC5216] [Aboba]
|         |(0)      ------------------> (0)      |                   |
|67,941   |         Request, EAP-TLS [R           |                   |EAP: Request, EAP-TLS [RFC5216] [Aboba]
|         |(0)      ------------------> (0)      |                   |
|98,805   |         Request, EAP-TLS [R           |                   |EAP: Request, EAP-TLS [RFC5216] [Aboba]
|         |(0)      ------------------> (0)      |                   |
|129,684 |         Failure   |                   |                   |EAP: Failure
|         |(0)      ------------------> (0)      |                   |
|144,697 |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
|160,125 |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
|175,561 |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
|190,996 |         Failure   |                   |                   |EAP: Failure
|         |(0)      ------------------> (0)      |                   |
|206,002 |         Failure   |                   |                   |EAP: Failure
|         |(0)      ------------------> (0)      |                   |
|206,204 |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
|212,103 |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
|227,535 |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
|242,970 |         Request, Identity [           |                   |EAP: Request, Identity [RFC3748]
|         |(0)      ------------------> (0)      |                   |
/regards Piter

Hi,
Did you ever try to configure re-authentication?
Is the client is up and running if you connect it to the switch?
Sent from Cisco Technical Support iPad App

Web Dynpro ABAP timeout

Hi everyone,
Is there a way to implement a custom timeout message for the end-user. I guess it needs to be some sort of handler on the ICF, but any help would be appreciated..
Thanks,
Nick

I had developed a custom timeout warning for BSP that I had been considering adapting to WDA. Here is what I was thinking (see if it helps you out).
I was think about building it as a separate component that could be included in another component via a UI Element Container. The component wouldn't have any visible UI elements - just a timer control and logic.
On each request/response (probably in the WDDOMODIFYVIEW event handler) we will have recalculate the timeout for the timer becasue it has just been refresh.
Here is the logic from BSP to determine the timeout that I was going to adjust. I think it would just need the call for the ICF timeout:
****Is this application stateful
if mc_runtime->keep_context = 1.
    name = 'rdisp/plugin_auto_logout'.
    call 'C_SAPGPARAM' id 'NAME' field name
                       id 'VALUE' field value.
****Is there a specific Timeout set
    if mc_runtime->server->session_timeout is initial.
****No Timeout set - get the default value from the profile parameter
****Profile Parameter is already stored as number of seconds.
      timeout = value.
    else.
****We got a specific timeout - now convert it to a number of seconds.
      data: minutes type i.
      l_timeout = mc_runtime->server->session_timeout.
      minutes = l_timeout+0(2) * 60.
      minutes = minutes + l_timeout+2(2).
      timeout = ( minutes * 60 ) + l_timeout+4(2).
****If a specified timeout is larger than the default, it is ignored.
****Use the default instead.
      if timeout > value.
        timeout = value.
      endif.
    endif.
    if timeout > me->delay.
****Turn this into the number of microseconds
      trigger_timeout = ( timeout - delay ) * 1000.
    endif.
else.
    rc = co_element_done.
    exit.
endif.
Now when the timer actually triggers in the WDA, it will trigger a server event and reset the actual timeout. In BSP this isn't a problem, because we do the dialog all via JavaScript and avoid a server refresh. In WDA even though the backend timeout has been reset, we would just continue processing as though it hasn't been. I would produce a popup warning the user that they are about to timeout. This popup will have a timer that if it doesn't receive an answer after 1 minute (configurable) it will force closure (exit navigation). The user can choose to renew their timeout (actually it was already renewed by the popup server roundtrip - but they won't know that). This will actually just close the popup dialog.

Syn Timeout Traffic From VPNPool

Hello i know theres a lot topics about the subject but i been reading since past 2 weeks and i cant find my solution.
My VPN Cisco client connects to the ASA 5510 and everything looks good but when i try send traffic(RDP) nevers connects and the logs shows a syn timeout. Here is my Configuration i really appreciated any help
ASA Version 8.2(1)
hostname xxx
domain-name xxxx
enable password g.wfzl577L4IVnRL encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
interface Ethernet0/0
nameif outside
security-level 0
ip address 201.199.135.x 255.255.255.248
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.1.1.x 255.255.255.0
interface Ethernet0/2
no nameif
security-level 100
ip address 192.168.30.x 255.255.255.0
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
boot system disk0:/asa821-k8.bin
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server xx
name-server xx
domain-name xxxxx
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list inbound extended deny ip object-group Deny_Access any
access-list inbound extended permit tcp any object-group web-servers object-group web-ports
access-list inbound extended permit tcp 209.200.128.0 255.255.192.0 host 201.199.135.x object-group web-ports
access-list outbound extended permit ip object-group trusted any
access-list outbound extended permit tcp object-group web-servers any object-group web-ports
access-list outbound extended permit tcp 10.1.1.0 255.255.255.0 any object-group general-access
access-list outbound extended permit tcp host 201.199.135.xx any object-group web-ports
access-list inside_access_in extended permit ip object-group trusted any log disable
access-list inside_access_in extended permit ip object-group DNS-Servers any log disable
access-list inside_access_in extended permit udp host WEB3 any eq ntp inactive
access-list inside_access_in extended permit ip 192.168.3.0 255.255.255.0 10.1.1.0 255.255.255.0
access-list ISA_access_in extended permit object-group Ports host 192.168.30.7 any
access-list inside_nat0_outbound extended permit ip 10.1.1.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list Split_Tunnel_List standard permit 10.1.1.0 255.255.255.0
pager lines 24
logging enable
logging list configLog level debugging class auth
logging list configLog level debugging class config
logging list system-IDSLog level informational class ids
logging list system-IDSLog level informational class sys
logging buffer-size 10000
logging asdm informational
logging from-address xxxx
logging recipient-address xxxxx level notifications
no logging message 111008
no logging message 111007
mtu outside 1500
mtu inside 1500
mtu ISA 1500
mtu management 1500
ip local pool VPN-POOL 192.168.3.2-192.168.3.254 mask 255.255.255.0
ip audit name attackPolicy attack action alarm drop
ip audit name antiSnifferPolicy info action drop
ip audit interface outside attackPolicy
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-641.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
global (ISA) 1 201.199.135.xx netmask 255.255.255.248
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 10.1.1.0 255.255.255.0
nat (ISA) 1 192.168.30.0 255.255.255.0
static (inside,outside) 201.199.xxx.xx WEB3 netmask 255.255.255.255
access-group inside_access_in in interface inside
access-group ISA_access_in in interface ISA
route outside 0.0.0.0 0.0.0.0 201.199.135.113 1
route inside 0.0.0.0 0.0.0.0 10.1.1.3 tunneled
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication serial console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.1.1.0 255.255.255.0 inside
snmp-server host inside 10.1.1.56 community
snmp-server host inside 10.1.1.18 community
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
service resetinbound interface ISA
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=xxx.xxxxxx
keypair sslvpnkeypair
crl configure
crypto ca certificate chain ASDM_TrustPoint0
certificate 6ef8fc4f
    308201f3 3082015c a0030201 0202046e f8fc4f30 0d06092a 864886f7 0d010105
    0500303e 311a3018 06035504 03131149 4345332e 646f746e 65742e63 6f2e6372
    3120301e 06092a86 4886f70d 01090216 11494345 332e646f 746e6574 2e636f2e
    6372301e 170d3132 30393035 31333435 35345a17 0d323230 39303331 33343535
    345a303e 311a3018 06035504 03131149 4345332e 646f746e 65742e63 6f2e6372
    3120301e 06092a86 4886f70d 01090216 11494345 332e646f 746e6574 2e636f2e
    63723081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100e4
    52687fe4 bc46d95c bb14cb51 c9ba2757 692683e2 315fb2cb 585c9785 295e9090
    88dea89d 5a1497f5 49107a1f ea35d71b fd05d9ff 68766519 652f1ff9 d19dc584
    310312b2 b369673f 70db355a 8d1e0a5e 4c825c27 7ad5e4f6 d36cbda7 b4ad77a5
    f490d942 2ef2488a bcb97b3f 5795bbcd 5f5b5c5a ff965272 2c8deaa5 2aa78902
    03010001 300d0609 2a864886 f70d0101 05050003 818100aa c1a3301a ec3898ac
    18699233 9aa26005 ad6c326f 51228c6b ba6a91e8 2ac79a0c 2af687c1 17bce83f
    bbf94b0e e6f09977 fad72c47 96d206ed c1157e67 79862e20 9f28cfa1 739c0fa2
    81272d5d a7124fc0 f95904db 72eacc9a 772208e2 1edba72b 618ed8dc d3c1b8f7
    5047604e f767eaf1 7ee5ed95 79ef9184 db62bcfb b71e6f
quit
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
telnet timeout 5
ssh 10.1.1.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd address 192.168.30.5-192.168.30.20 ISA
dhcpd dns 4.2.2.2 200.91.75.5 interface ISA
dhcpd enable ISA
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point ASDM_TrustPoint0 outside
webvpn
enable outside
enable inside
svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 1
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec l2tp-ipsec
group-policy VPNGP internal
group-policy VPNGP attributes
wins-server none
dns-server value 10.1.1.11 10.1.1.16
vpn-tunnel-protocol svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_Tunnel_List
default-domain value dotnet.co.cr
address-pools value VPN-POOL
username xxxx password gsUajqpee0ffkhsw encrypted
username xx password Wl5xhq9rOjTEyzHN encrypted privilege 15
username xxvpn password 9tblNqPJ2.cWaLSD encrypted
username xxvpn attributes
service-type remote-access
tunnel-group AnyConnect type remote-access
tunnel-group AnyConnect general-attributes
default-group-policy VPNGP
tunnel-group AnyConnect webvpn-attributes
group-alias VPN enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
service-policy global_policy global
smtp-server 10.1.1.20
prompt hostname context
Cryptochecksum:9720306792f52eac533976d69f0f3daa
: end
Thanks

Hi Oscar,
The configuration seems to be fine.
At this point lets troubleshoot the VPN communication.
The SYN timeout means that the server does not repond, or the SYN ACK never reached the ASA.
We need to place a packet capture on the inside interface as follows:
capture capin interface inside match ip 10.1.1.0 255.255.255.0 192.168.3.0 255.255.255.0
Then you try to access the server via RDP and issue the "show capture capin" command.
Another good test would be the following:
packet-tracer input inside icmp 10.1.1.250 8 0 192.168.3.1 detail ---> where the 192.168.3.1 must be the IP of the VPN client
Attach the output of the "show capture capin" and "packet-tracer" output.
Let me know.
Portu.
Please rate any post you find useful.

Web Dynpro Timeout

Hi ,
I need to display a pop-up to the user in a WDA application if the session is inactive for 2 mins. Please explain how to do the same.
Thanks in anticpation.
Regards
Nidhi Jain

I built such a timeout as a reusable component before. Everytime there is a post back to the server, the timer gets rerendered with the delay value if it is data bound. That way any server event cause the timeout to reset.
In the WDDOINIT of the component controller, I calculate the timeout by reading the SICF settings:
data: name type pfeparname.
data: value type pfepvalue.
data: l_timeout type icftime.
data: timeout type int4,
        trigger_timeout type int4.
clear: timeout, trigger_timeout.
****Get the App Server Timeout
name = 'rdisp/plugin_auto_logout'.
call 'C_SAPGPARAM' id 'NAME' field name
                     id 'VALUE' field value.
****Is there a specific Timeout set
if wdr_task=>server is bound.
    if wdr_task=>server->session_timeout is initial.
      timeout = value.
    else.
****We got a specific timeout - now convert it to a number of seconds.
      data: minutes type i.
      l_timeout = wdr_task=>server->session_timeout.
      minutes = l_timeout+0(2) * 60.
      minutes = minutes + l_timeout+2(2).
      timeout = ( minutes * 60 ) + l_timeout+4(2).
****If a specified timeout is larger than the default, it is ignored.
****Use the default instead.
      if timeout > value.
        timeout = value.
      endif.
    endif.
else.
    timeout = value.
endif.
data lo_nd_configuration type ref to if_wd_context_node.
data lo_el_configuration type ref to if_wd_context_element.
data ls_configuration type wd_this->element_configuration.
lo_nd_configuration = wd_context->get_child_node( name = wd_this->wdctx_configuration ).
lo_el_configuration = lo_nd_configuration->get_element( ).
* get all declared attributes
lo_el_configuration->get_static_attributes(
    importing
      static_attributes = ls_configuration ).
data ls_timeout_info type wd_this->element_timeout_info.
if timeout > ls_configuration-msg_delay_secs.
    trigger_timeout = timeout - ls_configuration-msg_delay_secs .
    ls_timeout_info-final_logoff_timer = ls_configuration-msg_delay_secs.
else.
    trigger_timeout = timeout - 60.
    ls_timeout_info-final_logoff_timer = 60.
endif.
data lo_nd_timeout_info type ref to if_wd_context_node.
data lo_el_timeout_info type ref to if_wd_context_element.
lo_nd_timeout_info = wd_context->get_child_node( name = wd_this->wdctx_timeout_info ).
lo_el_timeout_info = lo_nd_timeout_info->get_element( ).
ls_timeout_info-session_timeout = timeout.
ls_timeout_info-trigger_timeout = trigger_timeout.
* set all declared attributes
lo_el_timeout_info->set_static_attributes(
     static_attributes = ls_timeout_info ).
I have view with just timedTrigger. The delay is bound to TRIGGER_TIMEOUT attribute. I have an onAction called SHOWTIMEOUTPROMPT.
In the SHOWTIMEOUTPROMPT, I trigger a popup view:
method onactionshowtimeoutprompt .
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window         type ref to if_wd_window.
data lv_text_t01 type string.
lv_text_t01 =
wd_assist->if_wd_component_assistance~get_text( 'T01' ).
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_window(
                     window_name            = 'W_PROMPT'
                     title                  = lv_text_t01
*                    close_in_any_case      = abap_true
                     message_display_mode   = if_wd_window=>co_msg_display_mode_selected
*                    close_button           = abap_true
                     button_kind            = if_wd_window=>co_buttons_ok
                     message_type           = if_wd_window=>co_msg_type_none
                     default_button         = if_wd_window=>co_button_ok
lo_window->open( ).
endmethod.
In the popup view, I give the user the opportunity to continue their session or they will be logged out. So I have another timer in the popup that will trigger a navigation plug once it counts down. If the user closes the dialog, the timer gets reset because it triggers a server event. Otherwise if there is no activity the final timer gets triggered.
Here is the WDDOINIT of the Promt View:
method wddoinit .
data lo_nd_timeout_info type ref to if_wd_context_node.
data lo_el_timeout_info type ref to if_wd_context_element.
data ls_timeout_info type wd_this->element_timeout_info.
lo_nd_timeout_info = wd_context->get_child_node( name = wd_this->wdctx_timeout_info ).
lo_el_timeout_info = lo_nd_timeout_info->get_element( ).
*   get all declared attributes
lo_el_timeout_info->get_static_attributes(
    importing
      static_attributes = ls_timeout_info ).
data lo_el_context type ref to if_wd_context_element.
data ls_context type wd_this->element_context.
data lv_timeout_message type wd_this->element_context-timeout_message.
lo_el_context = wd_context->get_element( ).
data: s_minutes type string.
s_minutes = ls_timeout_info-final_logoff_timer / 60.
if s_minutes > 1.
    data lv_text_q02 type string.
    lv_text_q02 =
      wd_assist->if_wd_component_assistance~get_text( 'Q02' ).
    data lv_text_q03 type string.
    lv_text_q03 =
      wd_assist->if_wd_component_assistance~get_text( 'Q03' ).
    concatenate lv_text_q02
                s_minutes
                lv_text_q03
                into lv_timeout_message separated by space.
else.
    data lv_text_q01 type string.
    lv_text_q01 =
      wd_assist->if_wd_component_assistance~get_text( 'Q01' ).
    move lv_text_q01 to lv_timeout_message.
endif.
* set single attribute
lo_el_context->set_attribute(
    name = `TIMEOUT_MESSAGE`
    value = lv_timeout_message ).
endmethod.
And here is the event handler for the final timer:
method onactionlogoff .
data lo_nd_configuration type ref to if_wd_context_node.
data lo_el_configuration type ref to if_wd_context_element.
data ls_configuration type wd_this->element_configuration.
data lv_exit_url type wd_this->element_configuration-exit_url.
lo_nd_configuration = wd_context->get_child_node( name = wd_this->wdctx_configuration ).
lo_el_configuration = lo_nd_configuration->get_element( ).
* get single attribute
lo_el_configuration->get_attribute(
    exporting
      name = `EXIT_URL`
    importing
      value = lv_exit_url ).
data lo_componentcontroller type ref to ig_componentcontroller .
lo_componentcontroller =   wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->fire_logoff_evt( ).
data lo_w_main type ref to ig_w_main .
lo_w_main =   wd_this->get_w_main_ctr( ).
lo_w_main->fire_exitapp_plg(
    url = lv_exit_url ).
endmethod.
This is a reusable component, so it is actually firing an event in the hosting component. The hosting component can then decide how to handle the event - usually by trigging a navigation plug to itself.

No Timeout Target Assigned to ______ Timeout Ignored!

Similar Messages

Maybe you are looking for