No track list shown

Hi,
I have a problem with iTunes. I started it some minutes ago in order to search for a song. But the results of my search were not shown in the usual way. Usually there is a window on the top and a long list with all songs found among this window. But now there is no list. The same thing happens when I want to look at the top 100 list. The window at the top is shown but there is no list with the songs.
Can anybody help me?
Yours Basti

Hey guys,
I just figured out how to fix it. It wasn't working for me either, but then i updated my itunes to the 6.0 and i went through the updating process...and now it works...so try it.
-adam

Similar Messages

Is there a way in iTunes 11 to double click on an album and have the track list show up the way it used to in iTunes 10.7?

I'm talking about Album view where album covers are shown where you used to be able to double click and have it show up in a list view, but now in iTunes 11 there's just a window that pops up with the track list in front of other albums. Any way to get it back to the way it was in iTunes 10.7 where you double clicked on an album and it went into a list view?

Turning your Mac into a clock radio.
1. In iTunes create a playlist that contains just the radio station you want to wake up to.
2. Export the playlist (as .m3u works well). Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
3. In iCal create an event entry at the time you want to wake up.
4. Right (or Control) click on your wakeup event and select Get Info.
5. For "alarm" select Open File.
6. Now under Open File there will be a place to add the file to open. It will probably be some default entry (like iCal). Click on it will allow you to select "other." Then use the file dialog to select your playlist file.
Your Mac will wake you up at the appointed time. You don't need to keep iCal running. If you want to put you Mac to sleep for the night then there is one more thing you need to do. Open System Preferences to Energy Saver and click on the Schedule button. Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
Dan

Can not modify the layout for my Default Display Form, inside an issue tracking list. the form will be blank after adding the cusotm styles

I am working on an Issue Tracking list inside SharePoint 2013. but when a user clicks on an item , the description field will occupy only a small area of the page , while most of the page will be blank as follow:-
so using F12 Developer Tools on IE i detect the marckup for the Description field as follow:-
where it is mentioned that it have a Width=350, so i add a Script Editor web part to the displayform and i specify the following to expand the field from 350 to 1000:-
<style>
#SPFieldNote
{width: 1000;
<style>
but the result is that the display form will display nothing when clicking on an item as follow:-
Of course if i remove the ScriptEditor web part the form will be shown again..
so can anyone advice from where i can force the default display item view to occupy the whole page size ? Thanks

Hi John,
Since width is mentioned in 'td' itself, so using styles we can't overwrite the width. For that you can implement javascript or jQuery code to set the width on td element.
$('#SPFieldNote').width('1000px');
Regards,
Brij K

Adding new site columns to my issue tracking List, will result in having their Source field as blank inside the Issue content type

I have added an Issue tracking list to my SharePoint team site 2013. Then I wanted to add 5 extra columns to my list . So I did the following:-
I went to site settings.
Then I added 5 new site columns.
I went back to my list setting, I click on the “Issue” content type, and I added the 5 newly added site columns to my "Issue" content type , using the “Add from existing site or list columns” link as follow:-
And then these columns were added automatically inside the Edit, Create& Display forms.
But since this is the first time I work on such a task , so I want to make sure that I did every thing correctly. Because I am not sure why the 5 newly added site columns will have their source field inside the “Issue” content type as blank , as shown in
the above picture. So does this indicate that there is a problem ? or this is because I have added the 5 newly added site columns to the List content type and not inside the Content type at the site level ?
Thanks

Hi,
It’s by design, the Source field means the content type name.
As you said, when we create a new column, if we not attach the column to a content type, then the column would have not the source field option.
However, if you create a new column, then add the column in a content type, the content type would automatically update in the site.
Now, you would see a source content type appear.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How do I submit a private CD track listing so that other family members can get it?

I have created a CD of family recordings to destribute to different family members. I want to upload the track listing so that they can get the info for their uploaded CD from Apple. The drop down Submit CD Track Listing is inoperative with either the album or the playlist selected, so how do I do it?

elpianisto wrote:
I intend to burn the playlist to CD as an Audio CD. Will the info be on the CD and become available to view when the recipient uploads it into his iTunes on his computer?
No.
You cannot add this info. Gracenote databse is not intended for personal cds such as this.

How to get rid of internal divider in track list?

I had a couple of tracks where in the track list there is a vertical divider that can be dragged left and right within the track name area - to the right of the divider is instr number audio track number etc.
Now I've clicked on it the divider has appeared on all tracks.
How do you turn it off?
Message was edited by: Safetytrousers

You have configured your track header and it´s showing two names. Right click on any track->configure track header->Names->untag the little box labeled "automatic names"->OK

Can 'track list' button show your playlist rather than album track list?

Hi all
My 3GS iPhone has my music on it in the form of whole albums which live in individual playlists on my Mac, but I also have playlist 'mixes' which I've created from various songs from multiple albums.
When selecting to play a 'mixed' playlist on my iPhone I tap on it, tap the first song to start the music playing, but then if I tap the top right 'track list' button, instead of showing all the tracks in my created playlist it just shows the entire album tracks from where this particular song has come from. Visually I prefer the 'track list' screen but it seems I can't use it if I'm playing a 'mixed' playlist. Is there any way around this?
Also, this is the same if I have a double CD album: once I hit the 'track list' button it shows just CD 1 (or 2 if I'm further down the play list of course), rather than all the tracks even though on they all live in one single playlist on my iTunes. I've even taken the starts of the track names off (some of them start with '1_01 Song Title' for example) when importing them into iTunes to see if that helps but it doesn't: the iPhone KNOWS how that track was originally supplied!
Any help or clarification on this would be very helpful!
Markos

sadly, that kind of customization is only easily doable on a computer. the iPhone and it's core apps can not be changed by users. you can request the feature be put in, but unless there are a LOT of requests, you shouldn't get your hopes up as there are a lot of these kinds of requests, and by implementing it, how many other users would be angry and demand it be changed back? http://www.apple.com/feedback/
if you are playing a song that you selected in a playlist, you should be able to hit the 'back' button in the top left to go back to the playlist and view your songs in the playlist.
in regards to the 'cd 1 of 2' thing, you will need to change your song info to get this to show in the format you want. to see the song info, select a song and go to 'file -> get info'. that will show you all of the ID3 tag information, which you can edit to do whatever you want.

Moving more than one track at a time in track list

I have lots of tracks in my track list. How do I move them all down so I can create empty space for new tracks up on top, below the Global track? It seems I can only grab and move one at a time, which is not only incredibly inefficient, it messes up the order of the tracks.
Seems there should be a way to select all the tracks at once, such as by using the shift key, then dragging the bunch of them. But alas... I can't seem to select more than one at a time.
Any ideas?
Thanks.

Hi winky333,
It is not possible to do this in Logic. I guess they do this based on mixing etiquette where the tracks are sorted by the channels or outputs. You can create a template that has the tracks you want where you want them as a starting point. When you add a new track it always adds them under the currently selected track. So if you want a new one in a specific location is easiest to select the track above it. It is possible to sort the tracks as well. In the local menu in the Arrange window click the Track menu and then choose Sort Tracks By which has multiple options such as MIDI Channel, Audio Channel, Name, etc. I think this is a feature that should be added myself. You can always go to the Help menu in Logic and choose Provide Logic Pro Feedback and submit your feature requests/feedback there.
Cheers

How do you see your Ipod track list in Itunes 7???

When you connect your Ipod to Itunes 7 all it shows is a summary page and not the track list.
How to you see the tracks on your Ipod manually???

iPod: How to find the serial number
Also if you go to iTunes>Preferences>Devices and hover the mouse pointer over the iPod backup the SN will pop up.

Can you export the date and user to Excel that appears into a Comments field in a tracking list?

Hi everyone,
Can you export the date and user to Excel that appears into a Comments field in a tracking list?
When i export a tracking list with a Comment field in the Content type, the screen where you enter the data for an item, the Comments field just export the text of the comment into the Excel file.
In the Comments field appears also, besides the comment text, the user and date from who and when the comment is added.
Is there a way to export also the user and the date?
Thanks
Wim

create another comment field that doesn't use 'appending', and through SP Designer change workflow keep
updating that field with the new comments (prepend the field with date/username/new comment). Hide the field on all forms, but put it in the view you need to export to Excel.
Please refer few more links: Hope they will help
http://www.nothingbutsharepoint.com/2009/04/16/versioning-append-changes-to-existing-text-view-entries-aspx/
http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/comment-page-3/
https://mossipqueen.wordpress.com/2013/03/06/display-all-appending-field-entries-in-a-single-list-view/
http://community.office365.com/en-us/f/154/t/278560.aspx
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Track listing

I have an odd problem with the track listing on some of the albums in my library. The track listing for certain albums is correct in my itunes library, but the order is incorrect on my iPod. Does anyone know why this is?

See my article on Grouping Tracks Into Albums, in particular the topic Tracks out of sequence.
tt2

Bug in the "Tracks" list?

The tracks list is non-functioning on my iPod Touch. Possibly because if its length or possibly because of swedish characters in song names, but either way, the list bar on the side with the alphabet on does not work properly. It only reacts at about Q and above that I will only get thrown to A. Which is not nice when you have 2600 songs to go through... it takes a while.
Is this a known bug? Is there a fix? Don't tell me to do a search or something, that's beside the point, I want the alphabet-shortcut-bar to work!

http://www.apple.com/support/ipodtouch/troubleshooting/ipodtouch/

Where are my sound module preset names in the track list?

I've been using Logic since version 2.5 and, since I have several MIDI sound modules whose sounds I'm perfectly happy with, I am now using those sound modules with Logic 8.
But having just upgraded to 8 from 7, I've discovered something I think is missing, which is a bit of an annoyance.
In all previous versions of Logic, if you set up a instrument in the Environment for a MIDI sound module and then added all the preset names when you set up the bank/program change commands, when you select a preset from the track list in the Arrange window, the name in the track list changed from the name of the instrument to the name of the preset.
For example, the name would change from 'Fantom XR' (the name I'd called the instrument in the Environment) to 'PNO SoTrue' (the name of the preset) in the track list when I selected that preset via Logic.
However, in Logic 8, when I select a preset, the name on the track list now stays as 'Fantom XR' (or whatever the name of the instrument is) and doesn't change to that of the preset.
Given that I use six MIDI modulss, keeping track of the sounds by having the trak list name change to that of the presets was really useful for keeping track of what was what.
Have I just missed something with how to do it, or is a permanent change? I really hope not.

No, it's still there, but the interface has changed.
Right-click on a track and select "Configure Track Header"
In the box that comes up, enable the checkbox under "Names" and next to it (the second flip menu), select "Software Instrument Setting Name".
Now the program names in your multi-instruments are displayed in the manner you have been accustomed to.
As ever, save this stuff in your autoload to always have you own configs available.
You have some options there in that the two flip menus determine the first and second displayed track name, so you can set up how you like - it's more flexible than earlier versions of Logic.

HOW CAN I GET THE "ARTIST" DESIGNATION TO APPEAR ON THE CD TRACK LISTING ?

HOW CAN I GET THE ARTIST TO APPEAR ON THE CD TRACK LISTING?
IT IS ALREADY IN THE "GET INFO" LISTING.
THANKS!

There is a date and time Title you can use. If I recall correctly, it displays date plus hours and minutes, but not seconds.

How do I sort so that all the songs for a particular album show up under only one album? Example: Eminem 'Encore' has multiple artists on the entire track list.

Example: Eminem 'Encore' has multiple artists on the entire track list. Several songs will just list Eminem as the artist, but a lot will have Eminem, FEATURING...so and so. Each song that has "FEATURING" shows up as a different album, so if you are not paying attention, and pull all the songs from a particular album over to your ipod, for example, and you don't see that not all the songs are there, you won't get them all to transfer.
Is there anyway to correct this?

Each tune gets a file name - that is how iTunes works. iTunes is a data base manager.
In a PlayList a reference is created that will link to a specific tune.
You can take the tunes that you do not want listed under a particular album name and change the album name using 'Get Info' for that tune(s) from the iTunes window.
MJ

No track list shown

Similar Messages

Maybe you are looking for