No values in the LOV when trying to print checks

I am trying to print checks from Payables with XML Publisher, I have been able to get a concurrent job that shows the XML being generated and it is correct for the template/data definition I want to print on. when I run the XML Publish reports job and get the properties window to select the request ID and template It gives me a no values in this LOV error, I can go back to the requests and see the output,
I have the Format Payments Concurent request program set up as Output = XML, STyle = Portrate - Laser Checks, Printer = HP_4300, and there is checks in Save, Print, Style Required
The log from the request is this:
Payables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXPBFEL module: Format Payments (Evergreen, Laser)
Current system time is 03-NOV-2005 13:41:50
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PAYMENT_BATCH='20051103USD_1'
Execution options
p_printer_code_mask="101,102,111,112,121,122,141,201,202,211,212,221,222,241" p_sig2_amount="1000" p_sig3_amount="" p_sig1_vendnum="" p_sig2_vendnum="" p_sig3_vendnum="" p_continuous_stationery="N"
XML_REPORTS_XENVIRONMENT is :
/u01/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /u01/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 12671
Xlib: connection to "oracle2:0.0" refused by server
Xlib: No protocol specified
REP-3000: Internal error starting Oracle Toolkit.
MSG-00001: After SRWINIT
MSG-00002: After Get_Company_Name
MSG-00003: After Get_NLS_Strings
MSG-00004: After Get_Base_Curr_Data
MSG-00125: Laser check printing escape sequences have been activated.
MSG-00800: Getting Payment Batch details....
MSG-00007: After Custom_Init
MSG-00008: After populate_mls_lexicals
MSG-00044: ********** VOID **********
MSG-00020: After SRWEXIT
MSG-01002: Updating payment batch status....
MSG-01003: Deleting AP_CHECKRUN_CONC_PROCESSES record....
Report Builder: Release 6.0.8.25.0 - Production on Thu Nov 3 13:41:51 2005
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 419245
Number of copies : 0
Printer : HP_4300
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 03-NOV-2005 13:41:52
---------------------------------------------------------------------------

I know this is a little late. I recently had the same issue. The LOV showed the values properly in our Vision instance, but it didnt work in our Test instance. Oracle support wasnt able to pinpoint it. I discovered that the problem was with a particular System profile option (CONC_REPORT_ACCESS_LEVEL). It was set to null. It should either be set to "User" or "Responsibility". This particular value is used in the "WHERE" clause for the SQL statement used to fetch data for the LOV. You can check these settings using the Sys Admin responsibility.
Now, if I can just get my XML report (AP Checks) to run in a single step, instead of two separate steps... :)
I hope this helps. Regards, Mark.

Similar Messages

OAF : LOV mappings do not execute for specified default value in the LOV

Dear All,
I know the topic of default value in an LOV has been discussed a million times.
Please bear with me -
I set the "Initial Value" property for an LOV to populate a default value in the LOV field when the page loads. This works fine
My LOV has about 4 lov mappings that populate 4 "formValue" items on my page.
However, for the default value, these mappings are not executed and the formValue items remain empty. (Though the default value shows up fine on the screen)
Do I have to explicitly default these formValue items as well ? Is there anyway to get the mappings to execute ?
Thanks,
Gagan

Anyone ?

After downloading Yosemite, my HP Photosmart D110 printer will no longer work. The wireless connection is fine but says it cannot find my printer when trying to print.

After downloading Yosemite my printer, a HP Photosmart D100 will no longer print. The wireless connection is fine, and a test page printed perfectly directly from my printer. When trying to print from my computer, it says it cannot connect or find the printer. I tried downloading the most updated software from HP website but it doesn't appear to be helping.

Try resetting the printing system.
OS X Mavericks: Reset the printing system
If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
Network Printer Troubleshooting
HP – Wireless Printing Center
HP – Printer Not Found During Wireless Installation

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

"An error occurred sending the command to the application" When trying to open excel document from outlook 2007

Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Both my iphone 4s and my ipad3 will not connect to the server when trying to access my email account. Why, and how do I fix it.

Since 29/10/2012 my iphone 4s and more recently my ipad 3 will not connect to the server when trying to access my email account. All I get is an error message saying that 'cannot get mail, connection to the server failed' I hadnt changed any settings it just happened. I have since done a complete re-boot on the ipad but to no avail. Anybody got any suggestions?

No. Everything was working fine and then it wasn't. I hadn't changed any settings or switched either one off. When the phone stopped working properly I ignored it because I always have my ipad with me but that just sopped working properly and now I am stuffed. I have tried most solutions suggested on here even wiping the ipad clean and re-booting. I did this exactly the same way as when I first got it but still no joy. The same with the phone.

Right side of a shuttle - Retunr id and not the display value of the LOV.

Hi all,
The matter is how to populate/persist right-side of Shuttle in apex 4.0.1 after submit. The only problem I have is that the values
on the right side of the shuttle are dispayed as (retun value of the LOV) and not as (dislay valueo of the LOV). What I'm missing.
There is a way to pre-load dynamically, so depending on a query, a set of values on the right of the Shuttle, and then allow end user to change the preselection adding or removing values.?.

On page load you need to set the page item value to a colon separated list. Basically just reverse what ever processing you are doing on submit.

I switched my keyboard to french and now it won't change back to english. Quite the hassle when trying to write in english. Why would it be stuck?

I switched my keyboard to french and now it won't change back to english. Quite the hassle when trying to write in english. Why would it be stuck?

When the keyboard pops up, tab the Globe icon, and select the English keyboard.

2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad2

2nd Gen ATV I can hear but not see on the TV when trying to stream TV from the iPad2

You can look at the ipad under settings, general, about and see if it's 4.3.3.
Or when you connect the ipad to the computer with itunes, it'll tell you on the first tab if you need an update.

Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5

I get an Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5 using Windows 7. This just started happening after upgrading to MS 2013 suite and also installed Adobe Reader at that same time.
I had problems in the past when Reader was installed with Acrobat, so I uninstalled Reader, but the problem still seems to occur.
any help would be appreciated.

That link has backslashes (%5C) that need to be changed to forward slashes:
*http://supportdocs.sonybiz.net/indexes/pi/LFS/May_2004/00035186.pdf

Is anyone else having sensory issues since updating to the IOS 7.1.1? My phone is all over the place when trying to scroll or play a game. Know how to fix? It didn't do this till after this update.

My phone is all over the place when trying to scroll or play a game. Know how to fix? It didn't do this till after this update.

Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Urgent -Need to Add new values for the LOV field in forms

HI,
I am customizing an existing form. In that i need to add some values for the LOV fied which can be used during run time.
Please Can some one help me in doing this?
Thanks
Suresh P

Go to Navigator and edit the LOV or create a new one.
hope that helps!

Having trouble with the syntax when trying to only print some random pages from a multi page documen

Having trouble with the syntax when trying to only print some random pages from a multi page document. So far in the Print Selection Area, I have chosen "pages" and then typed 1,3-4 so as NOT to print page 2 but this does not seem to work. - Help Please

In my updated firefox, the print button does NOT open print preview first.
How can I access print preview function?

Problem when trying to print standart invoice crystal report for SAP

Hi All, I have the following problem when trying to print a system invoice report in crystal reports for SAP
I pass params and load the report using this code
Private Sub DisplayThreadReportSeq()
Dim oView As New frmViewReport
Dim strReportPath As String = ""
Dim strParamName As String = ""
Try
Dim CR As New ReportDocument
CR.Load(oReport.CrstPath)
' Declare the parameter related objects.
SetReportValues(CR)
Dim crParameterDiscreteValue As ParameterDiscreteValue
Dim crParameterFieldDefinitions As ParameterFieldDefinitions
Dim crParameterFieldLocation As ParameterFieldDefinition
Dim crParameterValues As ParameterValues
' Get the report's parameters collection.
For Each oPar As cslParam In oReport.Params
crParameterFieldDefinitions = CR.DataDefinition.ParameterFields
crParameterFieldLocation = crParameterFieldDefinitions.Item(oPar.ParName)
crParameterValues = crParameterFieldLocation.CurrentValues
crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
crParameterDiscreteValue.Value = oPar.Value
crParameterValues.Add(crParameterDiscreteValue)
crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
Next
If pPrint Then
If oReport.Printer "" Then
CR.PrintOptions.PrinterName = oReport.Printer
End If
CR.PrintToPrinter(IIf(oReport.Copies = "", 1, oReport.Copies), False, 0, 0)
SBO_Application.StatusBar.SetText("Printed Document Successfully", SAPbouiCOM.BoMessageTime.bmt_Medium, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
Else
oView.Text = pReport
oView.TopMost = True
oView.Viewer.ReportSource = CR
oView.Hide()
oView.ShowDialog()
End If
Catch ex As Exception
Util_GenErrorLog("DisplayReport", ex)
End Try
End Sub
This code works fine when the report invoke to print is developed in crystal reports version for .net 2008 or .net 2005
when trying to print a report standart getting from SAP BO 8.8.1 using this code I getting the following error:
Error in File C:UsersecombaAppDataLocalTemp5ARInvoiceStandartSap {300B9A68-DF05-4D7B-8F3B-1670A4493BEE}.rpt:
Error in formula .
'Shared numberVar SectionTotalMaxHeght;
A number, currency amount, boolean, date, time, date-time, or string is expected here.
This report is the standart report that SAP 8.8.1 includes and works fine on SAP.
I referenced this dlls CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.CrystalReports.Shared, version 10.2.3600
How I can get these dll´s version for Crystal Report 2008 for SAP Business one or How I can solve this problem
thanks in advance,
Ezequiel.

Hi Ezequiel,
You can try to search in SAP Business One Reporting & Printing forum section or post there.
nd.Q

Firefox crashes when trying to print a certain page

I process orders placed on our web site. As soon as I updated to v6.0 and then V6.0.1 at a particular page when I need to print out invoices (and only on this page - I print two other pages as well during the processing) firefox crashes when trying to print all, print one page or print preview. It is not every single time but most times. I never had this problem in any earlier version.
It happened in safe mode as well.
If it wasn't for the group tabs which I love in v6 I would go back to v5.0 as it is quite inconvenient and costs me extra time to have this happen. I have to display each of the invoices individiually and print them which never causes a crash.
I have submitted fourteen reports:
bp-66c1f741-c468-4281-a7b6-c04402110904
bp-57fc6542-ce0c-4074-a73b-1f7212110901
bp-31d79290-7da3-4fd3-9e63-0a6f32110829
bp-e7e38adf-c46b-4e32-8ece-2019a2110829
bp-c8cf5bc2-b6b0-4609-8891-edeae2110829
bp-bbf53d40-28a6-46d9-974e-cd07a2110825
bp-27d117d4-7504-449a-b3d2-b6aea2110825
bp-e376a370-cf25-4f61-9b1c-efdcc2110825
bp-2babf3dc-37ae-40c5-8402-7c81c2110825
bp-b52e8582-30b1-4b93-866f-912632110823
bp-e976aab0-69a4-45e3-bf29-935712110823
bp-7695be1b-55bf-4eed-99a8-7bd4a2110823
bp-1645b426-4e48-47e8-ac2d-1326c2110823
bp-de55d693-c91c-4943-b3aa-eeac52110823
Any help you can give would be appreciated. If I can give any more help please ask - [email protected]

The crash IDs that you posted are a crash with the Flash plugin.
*https://crash-stats.mozilla.com/report/index/9125d0a3-fdd7-4b3d-8493-db8752120331
Do the pages that you try to print have Flash content on them?
*https://support.mozilla.org/kb/Troubleshooting+plugins
*http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

No values in the LOV when trying to print checks

Similar Messages

Maybe you are looking for