No video stream when calling 3rd party endpoint from Jabber client

I use my own H323 client based on the H323Plus open source. It works very well with VCS and all endpoints we tried (a dozen or so from every vendor). We have a problem with Jabber Video though, across all versions from MOVI to 4.4.3. When my own client calls Jabber everything works as it should. However, when Jabber calls my client then (1) it takes up to a minute for Jabber to display incoming video and (2) Jabber does not create outgoing video stream. This behavior is 100% reproducible across all PCs we tried. Jabber is registered with either VCS Starter Pack or VCS Control, sofwtare version 6.1 in both cases. We do not use provisioning at this time.
In Jabber logs there is a unclear hint about insufficient resources (bandwidth?) for the video stream. VCS configuration is fine (it works with all other clients like e20) and I do not see anything useful in VCS logs.
To narrow the discussion, this is NOT a firewall, client camera or driver, OS misconfiguration or any other external issue. It is Jabber video having problem negotiating capabilities and/or resources but only it initiates the call. Where should I look for a solution?

I was afraid this will end this way. I hoped you might have had such a case solved already :-).
Audio works fine, no problem at all. The video packets are not sent from my client to Jabber while in the 1 minute wait; the stream from Jabber is not even started. I still think I need Wireshark to decode H225 traffic. Good idea with the interworking log - I was too lazy to go the OS layer. As you surely know, only 2 of the VCS logs are available from the Web interface.
thanks for your help!

Similar Messages

Calling 3rd party softwar from ABAP

hi all,
I would like to know is it possible, if yes, how to perform a call to launch external 3rd party software from ABAP (example, half way in process of a BDC session) and pass back the information from 3rd party software back to ABAP.
Thanks in advance!
Regards,
JL

Hi,
For that please refer to the following link:
http://help.sap.com/saphelp_nw70/helpdata/en/80/b711d7d6d03d4a956f16bb854a186e/frameset.htm
Regards,
Renjith Michael.

I recently created a video in iMovie that I later uploaded to YT. I had a message from YT a day later saying that the music I used in my video was detected as 3rd party content. I used music found in the music and sound effect section. What happened?

I recently created a video in iMovie that I later uploaded to YT. I had a message from YT a day later saying that the music I used in my video was detected as 3rd party content. I used music found in the music and sound effect section. The artist is listed as Apple Inc. What happened?
This is the message I received:
Your video may include the following copyrighted content:
Disputed claims
"Kadeem UIM-Trust Issues (Instrumental)", sound recording administered by:INgrooves Your dispute awaiting response by 12/08/12
What does this mean?
After your dispute has been submitted, your video will soon be available on YouTube without ads for third parties. This is a temporary status and might change at any time.Learn more about copyright on YouTube.

This question comes up from time to time. YouTube and Facebook are both wrong.
There are a number of con-men who think that they can earn a quick buck from claiming that they own the copyright to Apple’s royalty-free jingles and sound effects included with the iLife applications. These are all free to use, as clearly stated in section 2.C of the iLife Software License Agreement:
“You may use the Apple and third party audio content (“Audio Content”) contained in or otherwise included with the Apple software, on a royalty-free basis, to create your own original soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual samples, sound sets, or audio content may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files, sound effects or music beds.”
http://images.apple.com/legal/sla/docs/ilife09.pdf
You should this (also providing the above link) when following the dispute process with YouTube.

Query: Selective Transferring of old data (3rd party app) from old iPhone

Hello all.
I am collecting my new iPhone 3GS tomorrow
(and) I want only to add some, and not all the 3rd party apps (from App Store) that was with my old iPhone, in particular, Notes+
I know if before I perform a software restore or upgrade, iTunes will perform a back up of the phone, and if I insert a new iPhone, and choose the same name, e.g. "howwow iPhone", it will restore all the apps and data into the new phone.
But if I treat this new 3GS phone as a new phone, e.g. I name it "My 3GS iPhone" and add the Notes+ app, will all the data inside be copied into the new phone?
My main 2 aims are to only add some apps I need (like Notes+) to the new phone and still able to keep the data/notes in it, without re-adding manually.
Thanks and cheers

There is no way to selectively restore certain data from the backup to the new iPhone - it's all or none. If you set it up as a new phone, none of the old data will be transferred. Alternatively, you could set it up from the backup, then delete all of the unwanted stuff.

My video freezes when calling to mobile

I've discovered the pattern that every time I have a video call between my Windows 7 laptop and a mobile phone on the other side, my video freezes after a few seconds (the other party only sees the last frame/photo then on their mobile, whereas I see the video stream normally).
Is this some weird "feature"? Is there any way to fix it?
Video-calls between mobiles as well as between computers work fine.

Have they done the Quicktime setting ?
It should match his and your download speeds respectively for best results.
When in a chat Open the Connection Doctor from the Video menu and tells us if the incoming Video bar has dropped to zero.
This will mean that the other end is not sending properly (Or does not have the conection speed to do so)
Both of yopu should also check iChat > Preferences > Video section > Bandwidth Limit drop down. This should be set to NONE
11:03 PM Saturday; November 11, 2006

FCP 7 freezes when loading 3rd party Audiofilters

Hi there,
as said in the subject, I can't get FCP 7 to run, because it freezes on start-up, while loading UAD audio filters. I can't even quit it then, only option is to re-boot the Mac.
Now I have two questions:
1) is it possible to de-activate 3rd party plug-ins in FCP, especially the audio ones? I never use them anyway with FCP...
2) is it possible to force FCP during the start to ignore any 3rd party plug-ins? Like starting Logic with ctrl button held down gives you the option to start with or without core audio. Ctrl button on FCP didn't seem to work.
Regarding the UAD plug-ins: I also have Logic 9 installed, together with a Powercore and 2 UAD PCie cards. All 3 work fine with Logic. And they did work fine with FCP (as described in the next paragraph), even though I never used them for video, so I'd be fine if de-activating is possible.
In detail:
This is a totally fresh system here, everything's installed from scratch just a few days ago, no copy&paste involved. I made a big mistake lately, upgrading to 10.6, which brought me tons of trouble, i.e. kernel panics with the Powercore card. Finally I simply removed my main hard disk, bought a brand new one, installed the original 10.5.4 system, run the combo upgrade back to 10.5.8 and installed all applications again.
Everything works perfectly, all audio troubles in Logic are gone, system works fine again, my CS4 suite runs smoothly and now I tried to start FCP for the very first time and .. nope.. Funny enough I get an UAD message telling me I haven't used my UAD plug-ins in a while and asking me to confirm my computer clock settings. After clicking ok FCP loads another 2 UAD plug-ins and freezes. Actually I did use the UAD plug-ins in Logic only 10 min before. All fine.
Regarding compatibility - FCP did work with UAD before I upgraded my system to 10.6. And it did work with 10.6. Only reason to go back to 10.5.8 was the Logic/Powercore drama. And yes, I did check user permissions, did re-boot with apple-alt-p-r, etc. etc.
So if anybody has an idea, what the problem could be or if there is a way to navigate around, i.e. avoiding the plug-ins, I'd really appreciate this!!
Thank you and have a great weekend,
Joern

Hi Nick,
thank you for the link, I downloaded the app but even though the concept sounds good, it didn't really work. When I try to de-activate any plug-in I only get error alerts.
But now I downloaded a new authorization file from UA, re-authorized and voilà - FCP is happy and running. Loading tons of plug-ins I don't need but back in business and running. Seems like I paniced too early.
Thank you,
Joern

Call 3rd party web service from OAS J2ee application.

Hi everyone,
I have the following problem. I am using Oracle Application Server 10g (version 10.1.2.0.2).
I have deployed a J2EE web service to this App Server and from within this service I call a 3rd party Web Service (.NET) to a remote system. It works fine.
However when the remote server for some reason restarts my web service noway can find the remote web service. I get a connection timeout exception to my logs.
With a standalone client that I have to the same machine where the Oracle Application Server is installed I can call directly the 3rd party web service with no problems at any time so I am sure that there is no connection problem.
If I restart the Oracle Application server then the J2EE web service finds the remote web service again.
This means that whenever the remote server falls and recovers I will need to restart my Oracle Application Server as well, to let my web service find the remote web service. Crazy isn't it?
Does anyone knows what happens??
Thanks

All depends on the service. You can not just access a service. You need things like if the data is JSONP or if they have instructions or keys etc. You need to just follow the instructions the service will offer on how to connect to it.

How does one create product keys when developing 3rd party Addons

HI
DOes anyone have experience in developing 3rd party addons? How do you manage liscense keys, is there a function module which can generate the key?
and buildingin a expiry date so that a customer can note hack a table entry to continue?
Thanks
Henry

woodwing seems to have a nice toolset to make it easier for sure... but I'm not sure that is the correct direction for
us. As we don't want to have to submit anything to Apple. Our needs are for internal use only and we would not be creating content for the public.
I don't follow the ePup process fully... PDF's we can load right onto the iPad. It's a real shame about flash not working as we can make some very slick flash content right out of indesign with little effort. (maybe the direction should be a Flash to HTML5 converter? Goto page commands assigned to buttons would be wonderfull if they worked but when you export the doc to PDF Acrobat complains that it is not compatible. When we export to flash it works like a charm on a PC.
Haven't found a good gudie for bookmarks yet... and if that would give us buttons on each page to move the user back and forth through the document.

Insert video stream into call

Hello,
Does anyone know if it is possible to insert a video stream from an IP camera into a call? The calling device is an intercom with a camera nearby and the call wil lbe going to an 8941 video phone. The camera is H.264 compatible.

Hi frendz,
I want to know how to, Connect to a remote online
webcam and store that Video stream into our local
disk. The jennicam is no longer online.

Logic crash when loading 3rd party space designer preset

Hi,
I am having problems loading 3rd party space designer presets in a specific project. When I load the presets in a new song there is no problem. I would like to use the presets in this specific project, so maybe somebody knows a solution.
I already tried system maintenance like
- running the regular cron scripts
- repairing permissions
- removing the logic preferences file
My setup:
- dual 2Ghz PPC G5
- 4 GB DDR SDRAM
- OSX 10.4.11
- Logic Pro 8.0.2 (1502.22)
And the crash report until the crash:
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
Command: Logic Pro
Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Parent: WindowServer [78]
Version: 8.0.2 (1502.22)
Build Version: 9
Project Name: Logic
Source Version: 15022200
PID: 374
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000014
Thread 0 Crashed:
0 com.apple.AppKit 0x926bd0c8 -[NSMatrix mouseDown:] + 304
1 com.apple.AppKit 0x9256b4e0 -[NSWindow sendEvent:] + 4616
2 com.apple.prokit 0x96b52914 -[NSProWindow sendEvent:] + 272
3 com.apple.logic.pro 0x005ff78c 0x1000 + 6285196
4 com.apple.AppKit 0x92514524 -[NSApplication sendEvent:] + 4172
5 com.apple.logic.pro 0x00521c74 0x1000 + 5377140
6 com.apple.logic.pro 0x0051bf54 0x1000 + 5353300
7 com.apple.logic.pro 0x00521c4c 0x1000 + 5377100
8 com.apple.AppKit 0x9250b960 -[NSApplication run] + 508
9 com.apple.prokit 0x96b2e714 NSProApplicationMain + 296
10 com.apple.logic.pro 0x00003f1c 0x1000 + 12060
11 com.apple.logic.pro 0x00003c20 0x1000 + 11296
Any ideas?
Thanks,
Wouter.

A quick update: logic crashes in more cases now. Last time I was working on volume automation in the arrange window.

Sending call to 3rd party VRU from ICM Script

Integrating ICM Script with 3rd party VRU using GED-125 interface. I am having trouble to send the call from Cisco CM to 3rd party VRU. Trying Send to VRU node but it is not clear how to pass the destination for 3rd party VRU.
Any feedback would be helpful.

Move this to contact center forum to get better response.
Here: https://supportforums.cisco.com/community/5926/contact-center
-Terry

How to call a CORBA Object in a 3rd Party ORB from a EJB

Hello
I found a few articles on the web how to call EJBs for example from C++.
However, I want to do the inverse. I want to resolve an Object (implemented in C++, using OmniORB) via COS-Naming and invoke it from a EJB. I can write a simple Java Client which does this without a problem. But as soon as I try to do the same in EJB I get the following:
[#|2004-11-09T10:48:16.848+0100|WARNING|sun-appserver-pe8.0.0_01|javax.enterprise.resource.corba._DEFAULT_.rpc.transport|_ThreadID=12;|"IOP00710209: (INTERNAL) Unable to create listener thread on the specific port"
org.omg.CORBA.INTERNAL: vmcid: SUN minor code: 209 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.createListenerFailed(ORBUtilSystemException.java:3142)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.createListenerFailed(ORBUtilSystemException.java:3160)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryAcceptorImpl.initialize(SocketFactoryAcceptorImpl.java:60)
at com.sun.corba.ee.impl.transport.CorbaTransportManagerImpl.getAcceptors(CorbaTransportManagerImpl.java:190)
at com.sun.corba.ee.impl.transport.CorbaTransportManagerImpl.addToIORTemplate(CorbaTransportManagerImpl.java:207)
at com.sun.corba.ee.spi.oa.ObjectAdapterBase.initializeTemplate(ObjectAdapterBase.java:104)
I think there is somehow a conflict because the SUN Appserver also uses CORBA. My Code looks like this:
String[] a = null;
Properties props = new Properties();
final String CORBA_HOST = "arcos";
final String ORB_INITIAL_PORT = "2809";
props.put("org.omg.CORBA.ORBInitialPort", ORB_INITIAL_PORT);
props.put("org.omg.CORBA.ORBInitialHost", CORBA_HOST);
org.omg.CORBA.ORB orb = org.omg.CORBA.ORB.init(a, props);
So I thought this might be because there is already a ORB initialised. So I replaced the last line with
org.omg.CORBA.ORB orb = org.omg.CORBA.ORB.init();
Which should give me an ORB instance. However I get the following exception:
[#|2004-11-09T11:51:59.206+0100|WARNING|sun-appserver-pe8.0.0_01|javax.enterprise.system.stream.err|_ThreadID=15;|
org.omg.CORBA.NO_IMPLEMENT: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.genericNoImpl(ORBUtilSystemException.java:7085)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.genericNoImpl(ORBUtilSystemException.java:7107)
at com.sun.corba.ee.impl.orb.ORBSingleton.resolve_initial_references(ORBSingleton.java:311)
at com.ascom.util.CorbaNaming.resolve(CorbaNaming.java:26)
at com.ascom.fxm.FileManager.<init>(FileManager.java:46)
at com.ascom.srv.file.web.FileImporterImpl.importFile(FileImporterImpl.java:146)
Any ideas? Thank you very much in advance.
Oliver Jaun

Perhaps you could take a look at the following document and see if it meets your needs:
http://java.sun.com/j2se/1.4.2/docs/guide/rmi-iiop/interop.html

Windows XP Pro doesn't recognise iPOD when in 3rd party Docking Station

Hi All. My iPOD is brand new. If I use the syncing cable that came with it, everything works fine. However If use the 'Logic3' docking station (uses a standard USB cable) or the 'Gear4' docking station (standard ipod cable connects to female socket in rear of dock)I experience the following problems:-
Logic3 - lots of disk light activity but iTunes locks up and the iPOD does NOT appear in iTUNES
Gear4 - lots of disk light activity, iPOD appears in iTunes but I get an error message suggesting iPOD is corrupted and I can't sync any tunes
If I try a different USB port it makes no difference. If I disconnect them and go back to using the simple iPOD syncing cable everything is fine.
It makes me think it must be an iPOD problem as neither 3rd party dockig stations work properly.
I've contacted each Manufacturer of the each Dock, but they can't offer any help apart from suggesting I should update my iTunes software. I had already made sure this was up-to-date
Anyone got any ideas on what might be the problem?
Thanks
Steve

If I try a different USB port it makes no difference.
If I disconnect them and go back to using the simple
iPOD syncing cable everything is fine.
It makes me think it must be an iPOD problem as
neither 3rd party dockig stations work properly.
I think it might be the other way around. If it works fine with the Apple cable, but there are problems with the third party one, then the problem seems to be with the 3rd party stuff, right?
I've only used speakers w/ a dock (not something that was also hooked up to the `puter) so I can't address your problem directly. There's been a lot of weirdness with the new iTunes, and since your iPod is new I'm thinking these manufacturers aren't up to speed on what changes have been made. Just a guess brother.
BTW, are the docking stations new? I googled "Logic3 docking station" and it came up discontinued.
iBook G4 (14-inch Mid 2005) 3rd gen iPod (15 GB dock connector)

Calling 3rd party service in ABAP

Hello Experts,
I am looking at a scenario, where I need to develop webservice which may invoke 3rd party services for some address verification purpose.
Do we generally create RFC expoed as webservice or model service in PI and then implement it in ABAP?
Also, do we need to create consumer proxies for 3rd party service or any other way possible in XI/PI?
I want to know how does the whole scenario typically developed?
Regards,
Damandeep

Hi,
If you have PI in scope, I would recommend including it in the scenario. So basically develop a SOAP to Proxy scenario in PI (or SOAP to RFC, but I would prefer the first one because of monitoring purposes). Try searching SDN to find multiple examples.
Hope this helps,
Greg

Watching video streaming when it froze,why?

Why did the video streaming,that I was watching on my ipad suddenly freeze? It was not the video as I also had that on my computer.

1. Double-click the Home button and hold apps in the Task Bar down until they all wiggle then tap the minus sign to close apps. Tap the home button to return to Home screen.
2. Hold the Sleep/Wake and Home button down until you see the Apple Logo.

No video stream when calling 3rd party endpoint from Jabber client

Similar Messages

Maybe you are looking for