No volume when transfering to tape

I am trying to make a copy of a FCP project to tape. I hook up the firewire to my camera (100 dvxA) and I can record the movie (pictures) but I get no sound. The project plays sound as I record it's just that the sound does not get picked up by the camera. This may be an issue with a setting on my camera more than an issue of the project on my computer, because the sound over my computer works fine. Although I have tried every possible setting on my camera.... I think.
Any suggestions?
JIm in Columbus
Does anyone have any suggestions.

New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Similar Messages

When transferring volumes to a new drive, is a cloning app better than the finder?

When transferring volumes to a new drive, is a cloning app better than the finder?
I’m adding a new (bigger) external hard drive. I have created five partions on it as the old drive has. Is it, better, faster, more accurate, etc. to use an app, or just drag and drop the folders on to the new partitions. The sofware I have are; TechTool6, Drive Genius3 & SuperDuper. Two of the partitons have a Mac OS on them. The others just have files.
Thanks,
Larry

If the drive is to be functional as a boot drive then cloning is the better approach as it will grab all hidden configuration files and preserve the file access permissions properly; however, if you are setting up a data drive then the Finder's copy options should be adequate. To ensure file permissions are properly attributed to the copied files, select them and press Command-C to copy, followed by Shift-Option-Command-V to paste the items in the new location and preserve their file attributes (you may need to authenticate when copying them in this manner). If you do not need to preserve permissions then a basic drag-and-drop copy should suffice.

Hi i am new in numbers iOS. How can i do that product's price appear automaticly when i'm tapping product's name.thank .

Hi i am new in numbers iOS. How can i do that product's price appear automaticly when i'm tapping product's name.thank .

If your iPhone is not recognized by iTunes when connected - not available under Devices in the iTunes source list, check this link.
http://support.apple.com/kb/TS1538?viewlocale=en_US&locale=en_US
For voice memos, I have include voice memos when syncing selected under the Music tab for my iPhone sync preferences with iTunes which transfers voice memos from my iPhone to my iTunes library when syncing.

Transferring VHS tapes

I am transferring some of my VHS tapes to my iMac and iMovie (using a hones tech converter) with the plan to make them into DVD's. I have transferred a tape, made the edit, but the only thing I see is to just "burn a dvd". This could only be played on a mac computer. Is there any way to change the format so the dvd can be played on a dvd player?
Also, when I have the new dvd, how do I delete that entire import in iMovie. It just keeps appearing.
Thanks

So, I need a converter and a DVD recorder?
No, just one or the other. If you plan to edit the files and own a DV camcorder, I would check the manual to see it it has a passthrough option than can be used as a converter. (E.g., both my Mini-DV HDR-HC3 and older Hi-8/Digital-8 TRV-DCR520 will do this.) If you need a fixed conversion station, then a DAC or EyeTV device might be better. (E.g., I keep a Canopus ADVC300 connected to my entertainment system for capturing TV/Sat programs by a very old 400 MHz Ti Powerbook.
In the past I have made DVDs that I can't play anywhere except on the TV that the recorder is connected to. I know other people who have the same problem,but I have also spoken to some who can play their recorded DVDs on anything. I have tried several different DVDs, but that didn't work either. My recorder is about 2 years old.
Once recoded to DVD, the DVDs can be played back on your computer using the Apple DVD player, the VIDEO_TS files can be copied to your computer hard drive and played back by either the DVD Player or Front Row. In addition, applications like MPEG Streamclip or VLC can play the VOB files. It is also possible to Convert the VOB files to other compression formats for editing but the quality may not be as good as converting directly from your VHS tapes to DV (or other compression format). It is all just a matter of having the right applications/components installed on your system.
So, if I purchase a DVD recorder with new technology, will this solve my problem?
It probably is not necessary to purchase a new DVD recorder -- merely having the correct software to process the DVD encoded data. Appleman's sample video demonstrates what you can expect going through MPEG-2 whether using an EyeTV device or a DVD recorder. And depending on the VHS source quality, a DAC like the ADVC300 going directly to DV might be marginally better.

Annoying messages when transfering music

Hello, I have a 512 MB first gen Shuffle. Soon getting an 8GB Nano for Xmas, YAY! Anyway, I have the latest version of iTunes and am running it on Vista Premium. When I plug my Shuffle in iTunes opens and I can put music on my Shuffle. When transfering, Vista pops up a message saying that I should scan my Shuffle with ScanDisk because it detects a problem. I hit "OK" and it says that the volume cannot be found. Then after that, I get an AutoPlay message asking what I want to do with "Shuffle" which I have it named as. Does anyone have a solution? Thanks in advance!

I hit yes and it finally scanned. That ones gone, now just the AutoPlay message. Any ideas?

How do I get more volume when watching a movie and can I use headphones?

How do I get more volume when watching a movie? And can I also use headphones?

Many governments now limit how loud headphones can go. Europe has been plagued with this for many years. Separate amplifiers are available.
I believe volumes should be kept at reasonable levels to avoid hearing loss, but it's not the governments job to protect me.
I prefer Beyerdynamic over Bose Headphones. (They spend a lot less money on advertising.)
http://www.amazon.com/beyerdynamic-DT770-PRO-250-ohm/dp/B0006NL5SM/ref=sr_1_1?s= electronics&ie=UTF8&qid=1308969660&sr=1-1

My ipod 5th gen won't change volume when headphones are plugged in, but when they are not I can change the volume on the speaker. How do I fix this?

My ipod 5th gen won't let me adjust volume when headphones are plugged in, but when they are not I can adjust the volume on the speaker. How do I fix this?

Try a hard reset of the Nano. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
I assume you have double checked to make sure you are plugging the headset all the way in meaning the white part of the headset is flush with the body of the Nano?
B-rock

I have inherited an ICloud account from one of my employers when transferring from old MacBook Pro to new MacMini and need to separate from this, presumably by setting up a new ICloud account. How do I do this ?

I have inherited an ICloud account from one of my employers when transferring from old MacBook Pro (which belonged to them) to new MacMini and need to separate from this, presumably by setting up a new ICloud account. How do I do this ? And is there any danger, in doing so, that I might delete any of her ICloud information ?

Sign out in System Preferences>iCloud. This will remove any synced data such as Calendars, emails and Contacts from your Mac, but will have no effect on the data on the server - so that other devices logged into it will continue to see the data.

I have a 6thgen Nano, and all the recent songs I've purchased from iTunes wont play at normal volume when connected via audio cable. Can anyone help me figure out why?

This is a semi-new problem, ongoing for several months. I've purchased songs from iTunes before and they play just fine on my Nano when connected to an audio jack cable, but for some reason, anything downloaded in the last few months plays at an insanely low volume. Normally, if I hit the advance button on the Nano to skip to the next song I'll hear a split second of the song at normal volume, but that's it.
I've restored both the iPod and my iTunes (using a Dell laptop, Windows 7) multiple times but to no avail. The songs play fine in iTunes itself, but I've even noticed a decrease in volume when listening to the songs on headphones. I'm beyond frustrated with this as I can't find any support online in the Apple archives, and I can't listen to any of my new music without burning to disc. Any help would be greatly appreciated!!

I have, a couple different pairs, unfortunately, and still no change. TBH, the headphones don't bug me nearly as bad as the fact that I can't plug my iPod into a radio or speaker with an audio cable and hear my latest purchases. Drives me crazy that I can't listen to my tunes!

Cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike

I have an iPhone 5 and when i lightly tap on the back top part of my phone it sounds like something is rattling inside. Only on the top part of the phone, not on the bottom. I am wondering if anyone knows what this may be and should i have it looked at?

I have an iPhone 5 and when i lightly tap on the back top part of my phone it sounds like something is rattling inside. Only on the top part of the phone, not on the bottom. I am wondering if anyone knows what this may be and should i have it looked at?

Definitlely have it looked at. That could be a hardware deffect on the maker(apple) so there could be a definite replacement option.

What software is needed to be able to open the olm file I have exported from Outlook to my documents when transfering my Microsoft Office Contacts to my Mac Addressbook?

what software is needed to be able to open the olm file I have exported from Outlook to my documents when transfering my Microsoft Office Contacts to my Mac Addressbook?

You might find a solution here: how to convert microsoft outlook contacts to apple address book - Google Search
OT

Is there a way to turn off using ram as intermediary when transfering files between 2 internal hdds? (write cache is off on all drives)

right forum? first time here. none of the options seem perfect. so i guess this applies to 'setup.' i tried to describe what's happening verbosely from the start of a file transfer to completion of writing file to 2nd hard drive.
win 7 64bit home - i2600k 3.4ghz - 8gb of ram - 2hdd 1 ssd
I have this problem when transferring files between 2 internal hard drives. one is unhealthy (slow write speeds but not looking for advice to replace it because it serves its unimportant purpose). so, the unhealthy drive drops into PIO mode - that's acceptable.
however, a little over 1gb of any file transfer is cached in RAM during the file transfer. after the file transfer window closes, indicating the transfer is "complete" (HA!), it still has 1gb to write from RAM which takes about 30minutes. This would
not be a problem if it did not also earmark an additional 5gb of ram (never in use), leaving 1gb or less 'free' for programs. this needlessly causes my pc to be sluggish - moreso than a typical file transfer file between 2 healthy drives. i have windows write
caching turned off on all drives. so this is a different setting i can't figure out nor find after 2 hours of google searches.
info from taskmanager and resource monitor.
idle estimates: total 8175, cached 532, available 7218, free 6771 and the graph in taskman shows about 1gb memory in use.
at the start of a file transfer: 8175, 2661, 6070, 4511free and ~2gb of ram used in graph. No problems, yet.
however, as the transfer goes on, the free ram value drops to less than 1gb (1gb normal +1gb temporary transfer cache +5gb of unused earmarked space = ~7gb), cached value increases, but the amount of used ram remains relatively unchanged (2gb
during transfer and slowly drops to idle values as remaining bits are written to the 2nd hard drive). the free value is even slower to return to idle norms after the transfer completes writing data to 2nd hard drive from RAM. so, it's earmarking an addition
5gb of ram that are completely unused during this process. *****This is my problem*****
Is there any way to turn this function off or limit its maximum size. in addition to sluggishness, it poses risk to data integrity from system errors/power loss, and it's difficult to discern the actual time of transfer completion, which makes it difficult
to know when it's safe to shutdown my pc (any data left in ram is lost, and the file transfer is ruined - as of now i have to use resmon and look through what's writing to disk2 -> sometimes easy to forget about it when the transfer window closed 20-30minutes
ago and the file is still in the process of writing to the 2nd disk).
Any solution would be nice, and a little extra info like whether it can be applied to only 1 hard drive would be excellent.

Thanks for the reply.
(Although i have an undergrad degeee in computers, it's been 15years and my vocab is terrible. so, i will try my best. keep an open mind. it's not my occupation, so i rarely have to communicate ideas regarding PCs)
It operates the same way regardless of the write-cache option being enabled. It's not using the 5gb for read/write buffer - it's merely bloating standby memory during the transfer process at a rate similar to the write speed of destination (for my situation).
at this point i don't expect a solution. i've tried to look through lists of known memory leaks but i dont have the vocabulary to be 100% certain this problem is not documented. as of now it can't affect many people - NAS's with low bandwidth networks, usb
attached storage etc. do bugs get forwarded from these forums? below i can outline the consistent and repeatable nature not only on my pc but on others' pcs as well (2012 forum post i found).
I've been testing and paying a little more attention and i can describe it better:
Just the Facts
Resmon Memory Info: "In Use" stays consistent ~1gb (idle amount and roughly the same when nothing else is running during file transfer)
"Modified" contains file transfer
data (meta data?) which remains consistent at little over 1gb (minor fluctuations due to working as a buffer). After the file transfer window closes "Modified" slowly diminishes as it finishes lazy writing (i believe that's the term). I forget idle
pc amount, but after transfer this is ony 58mb)
"Standby" as the transfer starts it immediately rises to ~2gb. I'm sure this initial jump is normal. However, it will bloat well over 5gb over time with a large enough transfer increasing at a consistent rate during the entire transfer
process. the crux of the matter.
"Free" will drop as far as 35-50megabytes over time.
as the transfer starts, the "Standby" increases by an immediate chunk then at a slow rate throughout entire transfer process(~1mb/s). once writing metadata to RAM no longer occurs, the "Modified" ram slowly (@500kb/s matching resmon disk
activity for that file write) diminishes as it finishes lazy writing, After file is 100% written to destination drive, "Standby" remains a bloated figure long after.
a 1.4gb transfer filled 3677MB of "Standby" by the time writing finished and modified ram cleared. after 20minutes, it's still bloated at 3696MB. after 30-40mins it's down to 2300mb - this is about what it jumps immediately to when transfer starts
- it now remains at this level until i reboot.
I notice the "standby" is available to programs. but they do not operate well. e.g. a 480p trailer on IMDB.com will stop-and-go every 2-3seconds (stream buffers fine/fast) - this would be during the worst case scenario of 35-50mb "Free"
ram. my pc isn't and never was the latest and greatest, but choppy video never happens even with 1 or 2 resource hogs running (video processing/encoding, games, etc).
Conjecture Below
i think it's a problem when one device is significantly slower at writing than the source device - this is the factor that i share with others having this problem. when data is written to modified ram then sent to destination, standby memory is expanded
until it completely or nearly fills all available RAM - If the transfer size is large enough relative to how slow the write speed of destination device is. otherwise it fills it up as much as the file size/write speed issue allows. the term "memory leak"
is used below but may not technically be one, but it's an apt description in layman's terms.
i saw a similar post in these forums (link at end). My problem is repeatable and consistent with others' reports. I wasn't sure if i should revive it with a reply. some of these online message boards (maybe not this one) are extremely picky
and sensitive, lol.the world will end if an old thread revives - even if for a good reason.
i can answer some of the ancillary issues. one person (Friday, September 21, 2012 8:33 PM) mentions not being able to shutdown, i asume he means stuck on the shutdown screen - this is because lazy writing has not completed - his nas write speed is significantly
slower than reading from source - the last bits of data left in ram still needs to be writen to the destination. shutdown will stall for as long as needed until the data finishes writing to destination to prevent data loss.
another person (Monday, September 24, 2012 6:31 PM) mentions the rate of the leak, but the rate is more likely a function of read speed from source relative to write speed of destination. which explains why my standby expands closer to a 1:1 ratio compared
to his 1:100 (he said 10mb per 1000mb)
we all have the same exact results/behaviour, but slightly different rates of bloating/leaking. as the file is written from from the ram to the destination, standby increases during this time - not a problem if read and write speeds are roughly equal (unless
your transfering a terabytes then i bet the problem could rear its head). when writing lags, it gives the opportunity for standby ram to bloat with no maximum except the amount of installed ram. slower the write speed, the worse the problem.
The reply on Wednesday, September 26, 2012 3:04 AM has before and after pictures of exactly what i described in
"Just the Facts". Specifically the resmon image showing the Memory Tab.
The kb2647452 hotfix seems to do some weird things relative to this problem. in the posts that mention they've applied it: after file completes it looks like the "standby" bloat is now "in use" bloat. as per info from Tuesday, October
09, 2012 10:36 PM - bobmtl in an earlier post applies the patch. compare images from earlier posts to his post on this date. seems like a worse problem. Also, his process list indicates it's very unlikely they add up to ~4gb as listed in the color coded bar.
wheres the extra gb's coming from? likely the same culprit of what filled up "standby" memory for me and others. it looks like this patch relative to this problem merely recategorizes the bloat - just changes the title it falls under.
Link:
https://social.technet.microsoft.com/Forums/windows/en-US/955b600f-976d-4c09-86dc-2ff19e726baf/memory-leak-in-windows-7-64bit-when-writing-to-a-network-shared-disk?forum=w7itpronetworking

Mac Mini Mid 2011 General system slowdown when transferring files?

Hi i have a stock mac mini mid 2011, 2.5ghz i5, 4gb ram, 500gb HDD os 10.7.1 and i've noticed a general system slowdown when transferring files on 10.7 and the last 10.7.1 update ( from usb to hdd, another computer on my local network to the mini, external dvd to the mini, etc).
I could describe the slowdown as mouse pointer movement suffers, its "laggy", application take longer to start, even menus in them from appearing, writting something on the keyboard i have to wait like 5 - 10 seconds so the words start appearing in the app (i.e. textedit).
I wanted to know if any other new mac mini owner has had this issue and if there is any solution to this(that would not involve buying a SSD for example)?
Im not really sure if this is a hardware or system issue but it really is getting on my nerves(i know i could just wait for the files to transfer which is what i do now but i dont think that should be), since i also have a old macbook from 2007 2.0ghz c2d, 2gb ram, 250gb HDD os 10.6.8 and have never had this problem before.
Thanks in advanced.
Let me know if i need to give more info on this subject.
Edit: I forgot to mention, the funny thing is doing a time machine backup to my external HDD or transferring files from my HDD to a usb doesnt give me any kind of slowdown.

Hi Rick, I'd see if it's reated to this, which has many symptoms...
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

Problems with volume when streaming a Netflix movie from my Mac Book Pro (Mid 2009) to my flat screen TV?

Hi!
Does anyone know what I need to do in order to turn up the volume when I’m streaming a Netflix movie from my Mac Book Pro (Mid 2009) to my flat screen TV?
I hooked up the HDMI adapter from my Mac to my TV and it is currently in Mirror Mode, but I can’t turn up the volume, the only audio I’m able to adjust is on my Mac.
I’ve already tried: System Preference > Sound > Output > Internal Speakers Built in output. That’s the only option my Mac gives me.
Any suggestions?

Hello jguti,
Thanks for using Apple Support Communities.
I understand that your external display connected via HDMI is not being detected by the computer. At this point, the best bet for your next troubleshooting step would be to reset the system:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Take care,
Alex H.

No volume when transfering to tape

Similar Messages

Maybe you are looking for