Nokia 5800: cannot open messages, error when start...
In the last day, I've had an issue with my 5800 whereby when a new text message arrives, I am not able to open it fully. It seems stuck in the inbox. This has happened about 3 times.
I restarted the phone and got this message:
"Unable to install from memory card. Go to application manager" (or something like that).
I went to the application manager, but there was nothing in there.
When I went back to the messages inbox, all messages (inbox, draft, sent) were gone.
I've tried changing back and forth between the phone (C and memory card (E drives, but nothing is showing.
Any advice would be more than helpful. Thanks.
Hi, may also help if once you've cleared all messages if you go to options in messaging and select other, memory in use; select E:Mass memory, or F: Memory Card . Sorry if you're already aware of this, but it does help, also , after using usb cable always check this setting as , for some unknown reason, phone reverts to C, after being connected to computer! If there are messages you may need, sync with ovi, before deleteing. Hope this helps.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'
Similar Messages
-
Cannot open message catalog when invoked through JNI
Hello there.
I'm having the following problem:
I've coded a simple workstation tuxedo client (tuxedo version 9.1) that uses a couple of services. When I compile it as an executable and run it everything works fine, with no issues. However, when compiled as a dynamic library and invoked from JAVA via JNI, all functionalities operate correctly (the client connects to the server and invokes the services without a hitch), except that in the event of an error, when I invoke the function tpstrerror(), the following error is returned instead of the proper error description:
NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1142; check TUXDIR=/home/adrian/bea/tuxedo9.1, LANG=C
I've checked and re-checked the environment variables. I now include the values for those I think could be relevant to the issue, printed in the C code, obtained with the getenv() function.
These are the values printed when run as an executable:
TUXDIR=/home/adrian/bea/tuxedo9.1
LANG=en_US.UTF-8
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games:/usr/java/jdk1.5.0_06/bin:/home/adrian/bea/tuxedo9.1/bin
NLSPATH=/home/adrian/bea/tuxedo9.1/locale/C
And these when run as a dynamic library invoked from Java code:
TUXDIR=/home/adrian/bea/tuxedo9.1
LANG=en_US.UTF-8
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games:/usr/java/jdk1.5.0_06/bin:/home/adrian/bea/tuxedo9.1/bin
NLSPATH=/home/adrian/bea/tuxedo9.1/locale/C:/usr/dt/lib/nls/msg/%L/%N.cat
The only difference is marked in bold, but I don't think it matters much (don't know what is appending that extra value to the variable though).
I've tried setting LANG=C and NLSPATH=/home/adrian/bea/tuxedo9.1/, with no luck. Is there maybe a native library that has to be included in order to open the message catalogs that is not in TUXDIR/lib?
I'd highly appreciate if anyone could point me in the right direction here.
Thank you in advance for taking the time to read the post.
Regards.
Edited by evertonland at 01/31/2008 7:10 AMHaven't entirely given up on solving this "the right way", but implemented a partial solution that is of some help nonetheless. Check out the following thread if by some cruel whim of fate you're having this same problem:
http://forums.bea.com/thread.jspa?threadID=300005078 -
"Cannot Open File" error when generating CHM
Hello,
We have a small help file that we have in our source control
(StarTeam), and it's built on a daily basis. It hasn't been updated
in quite a while, so it was a surprise that it suddenly generated
the following error during the weekend build:
Cannot open the file
"b:\Document\HelpFile\!SSL!\Microsoft_HTML_Help\!chm_tmp_folder_0\HelpFile.hhc".
The CHM is normally built by running RH 7 via a command line
in StarTeam. I tested it today by running it manually and received
the same error. When I click "OK" on the error message, it
continues building and finishes with the normal "view/close"
message.
Anyone have an idea as to what may have caused this issue?
The immediate puzzle is to what changed that would have caused this
error, as we haven't updated this help file in several months (so
there shouldn't be any changes within the help file).
And to pre-empt the usual first response, we have a copy of
RH 7 on the build machine itself, so it shouldn't be a "running
over a network" issue. ;*)Quick update: I had the chance today to check out the files
and build them locally on my machine with my copy of RH7.
It appears to build normally for me, and I'm not getting the
error message being generated on the build machine.
This leads me to think something on the machine has changed,
but I'm still at a loss as to what it might possibly be. -
Ulimit "cannot modify limit" error when starting Apache
This isn't exactly an OSX Server problem, but I am trying to start Apache and subsequently Tomcat on my MacBook Pro so I can locally test a website before I deploy it to our test server. (The MacBook is a new machine to which I recently migrated my setup from my old PowerBook. The PowerBook is running 10.4.11, FWIW, and all worked well there.)
When I do this from the command line:
sudo /Library/Apache2/bin/apachectl start
I get:
/Library/Apache2/bin/apachectl: line 70: ulimit: open files: cannot modify limit: Invalid argument
And Apache is not started. This runs fine on my old machine. The culprit line from apachectl is:
ULIMITMAXFILES="ulimit -S -n `ulimit -H -n`"
Just running the'ulimit -H -n' yields 'unlimited'.
What's the problem here, and how do I fix it? I haven't found the answer by Googling.Back up all data.
Select
Shell ▹ New Command
from the Terminal menu bar. Copy and paste the following line into the text box that opens:
mkdir disabled_shell_files; mv .profile .bash* $_
Your old shell initialization and history files will be saved in a directory with the indicated name at the top level of your home directory. Test. -
PDF created in CS6 now produces a "Cannot Open File" error when I try to reopen it :(
I created a file in Illustrator CS6 (v. 16.0.0), and saved it as an (editable) PDF. When I try to reopen that same PDF inside Illustrator CS6, however, I get a "Could Not Open The File" error.
The file opens in Acrobat just fine, but I need to continue editing/working on it. Opening it in 5.1 works but it's all flat and not ideal for editing. Renaming the extension to .eps or .ai didn't work, either. I also looked into potential font conflicts (none) and restarted my Mac (OS 10.7.5) to no avail.
Thoughts/suggestions most welcome!Illustrator is not designed to be a pdf editor, so save a .ai file backup always.
A restart, as you did, of Illustrator or your mac will allow you to open the .pdf, or resetting your font cache with fontnuke.
Update to 16.04, and especially check if acrobat needs updating.
I have had and so have others problems with making .pdfs if you do not have a printer chosen, usually you get an error could not save .pdf but check you have a printer chosen in system preferences >> Print & Scan . -
Switch error : error when starting a switch branch
Hello,
I'm facing an issue on a simple switch :
I have the following condition : &change& = X or &molga& = AE
when the two conditions are OK, the WF is OK, but :
when the second part is false (example : molga = 14 or molga = EG), the WF fails and I have this message : "error when starting a switch branch". I don't understand why knowing that the element "molga" is defined in the WF container as T500P-molga !
Many thanks,
KarimHi,
I think both the conditions are failing, &Change& ne 'X' and &molga& ne AE. So the WKF will be going into error and says, "error when starting a switch branch". Please make sure you have other branches in the switch conditon step, to handle if both conditions failed. So WKF will take that branch.
Regards,
Vinoth -
NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1037 error
HI,
I am getting this error when the client (Powerbuilder) sits idle for some time after performing few operation.
NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1037
The error is logged on Client side ULOG; the server side ULOG does not have any error .
Thanks@Hi,
My guess is that you have a firewall between your client and the Tuxedo system that is timing out the connection. The error is network error. Try looking at the -K option for the workstation listener WSL.
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
this device is not longer eligible for creating a free i cloud accounting on my Iphone 5s , my old not working now cannot opened again just when i try make a free email this Message showed up how i can fix it
please help me
iPhone 5s, iOS 8.3Create a new AppleID on a different iOS device or on a computer. You will
then be able to use that newly created AppleID on your iPhone. -
"Not an executable or is a link" errors when starting Messaging Server
"Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem."Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem. -
Good morning, my photoshop stopped working, it gives error when started, what can it be?
This is the message that appears:
Unable to start the program it took a unexpected end of file
I hope answerCould not initialize Photoshop because an unexpected end-of-file was encountered. | Mylenium's Error Code Database
Mylenium -
<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/946071]]</blockquote>
cannot open some website,when try , then show this message"Sorry, we could not handle your previous request. Please refresh to try again." How to fix it?Try to update to the latest Firefox 17.0.x version.
*Help > About Firefox
See:
*https://support.mozilla.org/kb/update-firefox-latest-version
The Firefox 12.0 version that you currently run is no longer supported with security updates
You can create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Also make sure that your security software isn't blocking cookies or otherwise interfering. -
Issue: Cannot open message catalog LIBTUX_CAT
Hello
I am using a webservice that connects through Tuxedo. Tuxedo starts ok but when I call my service I receive the following error:
[13 Feb 2009 14:05:13 GMT][WARNING][][##: Exception raised in setting up security : : RemoteException : ][receive() failed (TUXEDO ERROR [12]: NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1322; check TUXDIR=/app/isel/tuxedo , LANG=C
); nested exception is:
com.iona.jbus.ntv.NativeIOException: receive() failed (TUXEDO ERROR [12]: NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1322; check TUXDIR=/app/isel/tuxedo, LANG=C
I googling for a while but could not get a clue to solve this.
Any help appreciated.
Thanks
JHi J,
Sorry, I'm still not following. When you say:
"2 - My service receives the call and calls to another webservice in a AS/400 using Tuxedo."
Are you saying you've written a Tuxedo service that makes a Web Service call to another Tuxedo service running on an AS/400 system? Let me try and ask some specific questions:
"1 - I call my webservice using SOAP UI"
What SOAP client are you using? Where is the Web Service you are calling running and what's it running under?
"3 - Inside the AS/400 that receives the call there is a TR application that calls a Listener Service that calls a cobol application."
What is a TR application?
In any case, as I said, the error you are getting is a TPESYSTEM error which should result in an entry being made in the Tuxedo ULOG file.
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
Error when starting Java(TM) ME Platform SDK 3.0
hey guys, I get this error when starting Java(TM) ME Platform SDK 3.0. When I installed it it installed 'successfully' and then I double clicked the file on the desktop (I'm using Windows Vista 32bit Home premium) and it gave me the following error when saying 'Starting Modules':-------------------------------------------------------------------------------
Log Session: Sunday, February 13, 2011 1:52:25 PM GMT
System Info: Product Version = Java(TM) ME Platform SDK 3.0
Operating System = Windows Vista version 6.0 running on x86
Java; VM; Vendor = 1.6.0_23; Java HotSpot(TM) Client VM 19.0-b09; Sun Microsystems Inc.
Runtime = Java(TM) SE Runtime Environment 1.6.0_23-b05
Java Home = C:\Program Files\Java\jdk1.6.0_23\jre
System Locale; Encoding = en_GB (cdctoolbar); Cp1252
Home Directory = C:\Users\Molten Ice
Current Directory = C:\Program Files\Java\Java_ME_platform_SDK_3.0\bin
User Directory = C:\Users\Molten Ice\javame-sdk\toolbar\3.0
Installation = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\ide10
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\java2
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\mobility8
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\profiler2
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9
Boot & Ext. Classpath = C:\Program Files\Java\jdk1.6.0_23\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\modules\jdk.boot.jar;C:\Program Files\Java\jdk1.6.0_23\jre\classes;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\dnsns.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\localedata.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunjce_provider.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunmscapi.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunpkcs11.jar
Application Classpath = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\boot.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-modules.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-util.jar;C:\Program Files\Java\jdk1.6.0_23\lib\dt.jar;C:\Program Files\Java\jdk1.6.0_23\lib\tools.jar
Startup Classpath = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\core.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\org-openide-filesystems.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1\core\locale\core_cdctoolbar.jar
WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-javame-common.jar!/org/netbeans/modules/javame/common/resources/layer.xml
WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-e2e.jar!/org/netbeans/modules/e2e/layer.xml
WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
[ 0] INFO - ootstrap.PropertyEditorManager - Registering custom property editors
[ 117] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 217] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 317] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 417] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 523] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 627] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 732] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 832] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 932] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 1032] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 2166] WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 2268] INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
[ 3384] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 5476] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 7576] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 9677] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 11777] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 13877] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 15977] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 18077] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 20177] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 22277] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 23379] ERROR - un.jme.toolkit.bootstrap.Batch - Problem calling start() on DeviceManagerConnection
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.io.IOException: Failed to retrieve RMIServer stub: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
... 24 more
Caused by: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
... 27 more
Caused by: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
... 32 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
... 37 more
SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
Caused: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
[catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
[ 23598] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 23698] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 23798] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 23898] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 23998] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 24098] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 24198] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 24298] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 24398] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 24498] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 24600] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 24700] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 24800] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 24900] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 25000] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 25100] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 25202] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 25302] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 25402] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 25502] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 25602] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 26699] WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 26799] INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
[ 27914] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 30005] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 32106] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 34206] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 36306] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 38406] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 40506] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 42607] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 44706] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 46806] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
[catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:53)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:86)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
[ 48018] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 48118] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 48218] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 48318] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 48418] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 48518] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 48618] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 48718] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 48818] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 48918] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 49018] INFO - bootstrap.ObjectGraphPI did install Nokia's SDK with NetBeans and this works perfectly.
I went through with everything recommended here: http://blogs.sun.com/javamesdk/entry/first_aid_when_emulator_doesn
But nothing worked.
Any help appreciated!
Thanks.Note: This thread was originally posted in the [Sun Java Wireless Toolkit|http://forums.sun.com/forum.jspa?forumID=82] forum, but moved to this forum for closer topic alignment.
-
Cannot open document (Error: INF)
We have migrated reports from version Business Objects 6.5.1 to Business Objects XI 3.1 SP2. We have been receiving sporadic 'Cannot open document (Error: INF)' now and again whenever you open Desktop Intelligence reports using Infoview. Have any other users come across this issue using BOXI 3.1 SP2. I do not believe that this issue occurred on SP1.
This error is very frustrating.
I have browsed various forums and implemented changes which have had no effect whatsoever including the SAP Marketplace.
We are also receiving SetPrompts Failed errors. When a report is opened in Infoview and you refresh a report, a blank dialog appears with a red cross. if you refresh the report again then the SetPrompts Failed error appears. I have evene made changes according to article 1364437 based on this error and this has not resolved the issue.
Regards
DipendraWe're on BOXI3.1 SP2 aswell and we have had the same sporadic issue - Cannot open document for Deski reports. This is causing some serious concern amongst our users over system stability.
You can recreate the situation by shutting down the InputFileRepository server and you get the same message. I've noticed that when this happens there is a mesage in the fcproc log file 'm_repFileMgr.Download failed'
My theory is that there may be some congestion in linking between the desktopintelligence server and the inputfilerepository. In addition, we had some logging on the fileserver and at the time of the error there was no mention of the report that failed or any error. We contacted SAP about this but did not get a satisfactory response. There were some heavily utilised DESKi reports which we managed to convert to Webi to take the load off and we also dropped the timeout to 20 minutes (not brilliant but it did mean that if we got the message the users wouldn't have to wait too long before it was resolved in case they couldn't get hold of IT).
I also upped the parameter for Maximum Retries for File Access in case it was having problems getting the file.
The result of this was that the error appeared to go away... until yesterday!!!
Any further insights welcome. -
Security Error when starting the server - WPLS 7.0
Security Error when starting the server - WPLS 7.0
what may be the reason ...
console :
BUILD SUCCESSFUL
Total time: 3 seconds
Starting WebLogic Server...
<May 30, 2005 4:22:15 PM IST> <Notice> <Management> <140005> <Loading configuration C:\cpDomain\.\config.xml>
<May 30, 2005 4:22:18 PM IST> <Info> <Logging> <000000> <FileLogger Opened at C:\cpDomain\portalServer\weblogi
c.portalServer.log>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The RoleMapper provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The Authorizer provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090143> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for private keys because its configured private key keystore file wlDefaultKeyStore
.jks does not exist.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090142> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for trusted (root) CAs because its trusted (root) CA keystore was not configured.>
<May 30, 2005 4:22:21 PM IST> <Notice> <Security> <090082> <Security initializing using realm cprealm.>
<May 30, 2005 4:22:21 PM IST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Excep
tion:java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<May 30, 2005 4:22:21 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal in
itialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
C:\cpDomain\bin>
Thanks
Thanks & Regards,
Siva VP,
[email protected]Looks like you cannot connect to LDAP. Are you configured correctly?
Maybe you are looking for
-
How can I get iPhoto '06 to quit? It refuses to quit.
You know that loud, wind instrument sound that plays that means, "Don't touch that button again because nothing will happen if you do"? Ever since late last night my iPhoto '06 has been scaring me off my last nerve with that sound. FIRST, it hid in t
-
Hi, I want to develop a webservice in webdynpro for consuming BAPI(BAPI_MATERIAL_AVAILABILITY). Can someone provide me the related document to reach this requirement? Thanks, Kundan
-
In mapping based MessageSplit how to createInterfaceDetermination,ReceiverDetermination.In My Scenario one sender, 2 Receivers. Now How many InterfaceDetermination's,ReceiverDetermination's have to be create
-
Hi, I've picked up what I think could be a problem with the tooltip in IE7. I used a PNG with a transparent alpha channel as a background image (to give it a drop shadow) to my tooltip - and it displays fine cross browser. However if I add useEffect:
-
Itunes will not open from my desk top. It just says "This version of Itunes has not been correctly localized for this language. Please run the English version". How can I change versions or whatever if unable to open at all? TIA