(NOLOCK) is giving syntax error

Hi,
I have query which runs properly in 1 server and in the other server it gives syntax error because of (NOLOCK).
When i remove (NOLOCK) its working fine.
my query is a big one...
But it is something like
INSERT INTO @abc
SELECT a.id,SUM(b.count) FROM
(SELECT DISTINCT id FROM table1 (NOLOCK)) AS a
INNER JOIN Table2 (NOLOCK) AS b
GROUP BY a.id
It is giving syntax error at only one (NOLOCK) that is near Table2 in one server and in other server it works fine...
Both the server versions are exactly same...
What is the reason?

First, it is generally a bad idea to post a follow-up "me, too" response to an old and answered question.  Fewer people will look at an answered question generally. 
Next, the reason this thread provides no information about the original problem and the solution is because the complete problem was not posted.  If your query generates an error message, it is important to see the complete and actual error message.
Given the conversation, it is likely that there was a syntax error in the various statements that OP tried and it was a happy accident that the removal of the hint caused the error to go away. 
Lastly one should refrain from using hints generally.  For some unfathomable reason there is a myth that it is a good practice to use the nolock hint. 

Similar Messages

  • Use Of "#EC CI_EXECSQL in ABAP with EXEC SQL. Statement giving Syntax Error

    Dear Gurus,
    I have encountered an issue while trying to remove warning for using Native SQL statement using pseudo comment "#EC CI_EXECSQL
    The thing is like this -- i have used follwing native sql command in abap.
    EXEC SQL.
        CONNECT TO 'SURROUND_DB'
      ENDEXEC.
    Now when i am checking this code in code inspector it is showing a warning with information below
    CA CL_CI_TEST_CRITICAL_STATEMENTS0006
    Code Inspector
    Critical Statements
    Use of Native SQL
    Authorization checks cannot be appropriately run using EXEC SQL and should be carried out at program level.
    The message can be hidden using the pseudo-comment "#EC CI_EXECSQL
    Use of exceptin handling section for that warning showing me to use :
    The message can be hidden using pseudo
    comment      "#EC CI_EXECSQL
    Now when I am using "#EC CI_EXECSQL in the abap like below :
    EXEC SQL. "#EC CI_EXECSQL
        CONNECT TO 'SURROUND_DB'
      ENDEXEC.
    It is giving syntax error
    The text literal ""#EC CI_EXECSQL        " is longer than 255
    characters.Check whether it ends correctly.
    Please provide the guideline to resolve this issue.
    Thanks & regards
    Saifur Rahaman.

    Hi Saifur,
    You can remove the warning using the following syntax:
    EXEC "#EC CI_EXECSQL
      SQL.
        CONNECT TO 'SURROUND_DB'
      ENDEXEC.
    At least, it worked fine for me when using OPEN CURSOR, SELECT, FETCH and so on statements.
    The way to use the pseudo comment is not very intuitive, but at least for my examples worked fine.
    I hope this may help you.
    Best regards,
    Edgardo G. König

  • Program giving syntax error in Production client

    Hi Experts,
                I have moved an object into testing client its working fine there,but when it was moved from testing to production client.
                they are getting the error as "program ZSIOPCN contains syntax errors", when they are trying to create a variant in SE80 for this program from menu goto-->variants.
                Can anyone give any idea why this error comes, when the program is working fine in Quality client. Please give me suggestions,why it may happen.
    all answers will be rewarded, Thanks in advance.
    Thanks & Regards,
    Poorna.

    hi Rodrigo Paisante,
               i didn't understand the point "one or more objects wold be moved too", means moving the same object many times.
               we generally move the workbench requests in a sequence, in which they released. This transport sequence is follwed in the same sequence when moving from one client to another client.
               can you eloborate the solution and possible cause for this problem. i am getting message error DB: 242.
    Thanks,
    Poorna

  • Code working fine in Enterprise version giving syntax error in Rel 4.6C

    Hello All,
    <b>Consider the following piece of code.</b>
    FORM fill_itabs  TABLES   p_t_table
                                            p_t_table_dummy.      
    Internal table to be used for dynamic where condition
      DATA: lt_wherecond TYPE STANDARD TABLE OF ty_wherecond,
    Structure for dynamic where condition
                ls_wherecond TYPE ty_wherecond.
      p_t_table_dummy[] = p_t_table[].
      REFRESH lt_wherecond[].
      CLEAR   ls_wherecond.
      ls_wherecond-data = 'kunnr = p_t_table_dummy-kunnr'.
      APPEND ls_wherecond TO lt_wherecond.
      SELECT kunnr INTO TABLE gt_kunnr
          FROM kna1
          FOR ALL ENTRIES IN p_t_table_dummy
          WHERE (lt_wherecond).
    ENDFORM.
    This is working fine in Enterprise version, but when I am trying the same in Rel 4.6C, I am getting a syntax error at the Select statement which states,
    "The WHERE condition does not refer to the FOR ALL ENTRIES table.-"
    Could anyone please suggest how to avoid this error?
    Regards
    Indrajit

    Hi Chemmam,
    yes, that will be a version problem. The general rule says, always use the NWDS corresponding to your server, and the main reason are the differences within the webdynpro implementation.
    So if you have a 6.40 with SP13 for example, use NWDS 2.0.13 as the base of your deployment.
    Hope it helps
    Detlev
    PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance! This also holds for: /thread/80658 [original link is broken]

  • FIM Portal giving Syntax Error "WebResource.axd"

    Hi Team,
    It is fresh installation of FIM 2010 R2. FIM Sync, FIM Service and Portal are installed on the same box.
    When opening FIM Portal, it does not load properly. Some boxes are misplaced and on checking the status bar I can see a list of errors.
    First error in the list is "Syntax error" "WebResource.axd" Code: 0 URL: http://FIMPOrtal/webresource.axd?.......
    It is followed by several "The value of the property 'WebForm_GetElementByTagName' is null or undefined, not a Function object" error for ScriptResource.axd file.
    I have sharepoing 2010 installed. There is no NLB installed. I get the same error when accessing portal using "localhost" or IP.
    I have tried to repair the FIM Service and Portal installation that did not help. I have also re-installed the service and portal.
    It gives the same error after lowering the security on IE, trying from other machine or adding the portal website to local sites. 
    Kindly help me fix this error. Any help would be greatly appreciated.

    Hello,
    can you provide a screenshot of that misplaced elements.
    I currently only know to reasons of misplaced elements in portal.
    1. NLB (which you dont use)
    2. Redirect in IIS
    but maybe a screen would provide more information to us.
    Regards
    Peter
    Peter Stapf - Doeres AG - My blog:
    JustIDM.wordpress.com

  • Routine In Program giving syntax error

    Hi All,
    I am calling below FORM from Script in 4.6C Version.
    /:  PERFORM GET_YY42V_ACTID
                      IN PROGRAM    Y42S_FORM_POOL
    /:  USING &VBELN&
    /:  USING &POSNR&
    /:  CHANGING &ACTID&
    Y42S_FORM_POOL is a function pool.
    FORM  GET_YY42V_ACTID USING   TABLES   in_par        
                                                            structure itcsy
                                          out_par   structure   itcsy .
      read  table in_par  with  key  'VBELN' .
    ENDFORM.                    " GET_YY42V_ACTID
    When I do syntax check getting below message:
      in_par  is not defined as tables    nor as Internal Table.
    Why i am getting this error?????
    2. i then left the routine without any code and activated.
       And this time while in Debugging checked that from Print Program control went to SAP code:
        perform (co_perform-form) in program (co_perform-program)
                                  tables co_sym_using
                                         co_set_symbols
                                  if found.
         co_perform-form & co_perform-program contains correct
         script name and Routine Pool names.
    But after pressing F%its going for Dump ...
    No Clues on that ?????????
    getting message:
    Runtime errors         PERFORM_TOO_MANY_PARAMETERS
    Exception              CX_SY_DYN_CALL_PARAM_NOT_FOUND
           Occurred on     2008/08/29 at   09:14:38
    Too many parameters specified with PERFORM.
    Any idea about this problem.
    Thanks in advance.
    Praveen

    1) FORM GET_YY42V_ACTID TABLES in_par
    structure itcsy
    out_par structure itcsy .
    The USING parameter is wrong.  Check again the syntax of FORM.  This leads to the second problem as with what you had, it considers TABLE, in_par structure itcsy out_par structure itcsy to all be parameters.
    matt

  • The following sql stmt is giving syntax error

    Dear abap experts,
    The following sql stmt is givin me the followin error.
    Incorrect expression "  A~CURRENCY" in WHERE condition.          
    the sql stmt is
    SELECT AFLDATE APRICE ACURRENCY BCOUNTRYFR BCITYFROM  BAIRPFROM BCOUNTRYTO BCITYTO B~AIRPTO
                            FROM SFLIGHT AS A INNER JOIN
                            SPFLI AS B
                            INTO CORRESPONDING FIELDS OF                  ITAB_ALV
                            ON ACARRID = BCARRID
                            WHERE CARRID EQ CARRID
                            AND CONNID EQ CONNID.
    kindly tell me the error.
    Edited by: Ansuman  Parhi on Jul 7, 2008 11:30 AM

    Hi,
    SELECT AFLDATE APRICE ACURRENCY BCOUNTRYFR BCITYFROM BAIRPFROM BCOUNTRYTO BCITYTO B~AIRPTO
    FROM SFLIGHT AS A INNER JOIN
    SPFLI AS B
    INTO CORRESPONDING FIELDS OF ITAB_ALV
    ON ACARRID = BCARRID
    WHERE CARRID EQ CARRID
    AND CONNID EQ CONNID.
    above ur code.
    in the where condition exactly mention carrid and connid for belongs to which table. mean check it elow code.
    WHERE ACARRID = CARRID(PARAMETER NAME)  AND ACONNID = CONNID(PARAMETER NAME).
    REGARDS.
    sriarm.

  • Skip first screen & ECC 6 syntax error

    Hi,
    I have program that is in ECC 6 giving syntax error
      call transaction v_tcode using i_bdc options from i_options
                                          messages into i_message
                                          and skip first screen.
    I am getting a syntax error that "The additon AND SKIP FIRST SCREEN" cannot be used with "CALL TRANSACTION USING..."
    Any info how to correct this.
    aRs

    Hi,
    Thanks for your reply.
    The first screen i am calling in my program
        perform bdc_dynpro      using 'SAPMYCTC' '0100'.
        perform bdc_field       using 'BDC_OKCODE' '=ENTR'.
        perform bdc_field       using 'YCTC-CTCNUMBER'
                                      wa_yctc-ctcnumber.
    i am pushing the values to first screen , then i  need to screen skip the first screen
    aRs

  • Syntax Error in Web UI component post upgrade

    Hi Experts,
    We have a enhanced component in IC agent which is giving syntax error post upgrade from 7.0 to EHP2. It seems some attributes have been removed/altered in the new super class.
    In this case do we need to delete the component enhancement and re do the effort or is there any way to regenerate the enhanced component ?
    Thanks, Please help.
    Rohit

    Hi Rohit,
    I've written a few blogs where I collected the different steps necessary in CRM after an EhP or SP upgrade. Furthermore I described solutions to common problems in these blogs. Please have a look an see if one of the described approaches is suitable for your problem.
    http://scn.sap.com/docs/DOC-44983
    http://scn.sap.com/docs/DOC-49317
    http://scn.sap.com/community/crm/upgrades-and-enhancement-packs/blog/2014/02/21/sap-crm-ehp3-upgrade
    Best,
    Christian

  • IF Stmt - Syntax Error

    Hi,
    Can you please tell me how to write the follwing stmt. It is giving syntax error.
      IF VBAK-ERNAM = 'BATCHUSER'
         OR   VBAK-ERNAM = 'REDDYV'
        NO_ORDER1 = NO_ORDER1 + 1.
      ELSE.
        NO_ORDER2 = NO_ORDER2 + 1.
      ENDIF.
    Thanks
    Veni.

    Veni,
    You are missing period '.' after
    "OR VBAK-ERNAM = 'REDDYV' "
    So right statment is..
    IF VBAK-ERNAM = 'BATCHUSER'
    OR VBAK-ERNAM = 'REDDYV'.    " Period in the end
    NO_ORDER1 = NO_ORDER1 + 1.
    ELSE.
    NO_ORDER2 = NO_ORDER2 + 1.
    ENDIF.
    Cheers,
    Nilesh

  • Case stmt with Like giving me syntax errors

    Hi, The following stmt is giving me syntax error. Please help. Thank you.
    SUM(CASE WHEN (GL_CODE_A.ACCNT = '12300100' AND GL_JE_HEADERS.SOURCE = 'Temp Transaction' AND GL_JE_HEADERS.JE_CATEGORY = 'PENDING') OR (GL_CODE_A.ACCNT = '45600100' AND GL_JE_HEADERS.SOURCE = 'Temp Transaction' AND GL_JE_HEADERS.JE_CATEGORY = 'PENDING' AND GL_CODE_A.GOALS LIKE (‘%R’)) THEN IFNULL(GL_JE_LINES.ENTERED_CR, 0) - IFNULL(GL_JE_LINES.ENTERED_DR, 0)ELSE 0 END)
    -- how to debug this stmt, the error message is too long, and how do you all debug a syntax error in OBIEE?
    -- Can you please let me know where the error is?
    [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near : Syntax error [nQSError: 26012] . (HY000)

    ssk1974 wrote:
    Hi, The following stmt is giving me syntax error. Please help. Thank you.
    SUM(CASE WHEN (GL_CODE_A.ACCNT = '12300100' AND GL_JE_HEADERS.SOURCE = 'Temp Transaction' AND GL_JE_HEADERS.JE_CATEGORY = 'PENDING') OR (GL_CODE_A.ACCNT = '45600100' AND GL_JE_HEADERS.SOURCE = 'Temp Transaction' AND GL_JE_HEADERS.JE_CATEGORY = 'PENDING' AND GL_CODE_A.GOALS LIKE (‘%R’)) THEN IFNULL(GL_JE_LINES.ENTERED_CR, 0) - IFNULL(GL_JE_LINES.ENTERED_DR, 0)ELSE 0 END)
    -- how to debug this stmt, the error message is too long, and how do you all debug a syntax error in OBIEE?
    -- Can you please let me know where the error is?
    [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near : Syntax error [nQSError: 26012] . (HY000)You debug your statement like you debug everything. Take it apart and rebuild it slowly until you find the piece that causes the error. One thing I see right off is that you have smart quotes around your %R.
    Don't add anything from Word, because smart quotes don't work. Change the single quotes to straight quotes and your query should work.

  • Giving the below syntax error

    Dear Experts,
    I have used 2 buttons in gui status as display and cjhange.When the user will click display button the screen will dynamically change to non-editable mode.So I have written the following code.
    loop at screen.
        if screen-group1 = 'MOD'.
          if flag = 'X'.
            screen-active = 1.
          else.
            screen-active = 0.
         endif.
         modify screen.
      endloop.
    But it is throwing the below syntax error.
    The type of "SCREEN" must be in the type or types of "SCREEN" compatible SEIN.
    Kindly give some advice.

    Hi,
       you are missing one ENDIF. and also u should the write the coding in BPO.
    loop at screen.
    if screen-group1 = 'MOD'.
    if flag = 'X'.
    screen-active = 1.
    else.
    screen-active = 0.
    endif.
    modify screen.
    endif. ====> here miss the endif.
    endloop.
    Thanks & Regards,
    Vallamuthu.M

  • [SOLVED] Php.ini syntax error, unexpected '&'

    Hi guys,
    I'm having a trouble setting up a local hosted LAMP, I want to enable the error reporting and display, but it's giving me this error:
    [root@albert albert]# php
    PHP: syntax error, unexpected '&' in /etc/php/php.ini on line 105
    Line 105:
    ; error_reporting
    Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED ; this is the 105
    Development Value: E_ALL
    Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    And when I access to on localhost/phpmyadmin:
    Fatal error: Call to undefined function PMA_DBI_num_rows() in /usr/share/webapps/phpMyAdmin/libraries/navigation/Nodes/Node.class.php on line 408
    When I comment the line 105,106,107, it works as I expected, but I can't see any error output...
    Here it's the entire php.ini:
    [PHP]
    ; About php.ini ;
    ; PHP's initialization file, generally called php.ini, is responsible for
    ; configuring many of the aspects of PHP's behavior.
    ; PHP attempts to find and load this configuration from a number of locations.
    ; The following is a summary of its search order:
    ; 1. SAPI module specific location.
    ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
    ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
    ; 4. Current working directory (except CLI)
    ; 5. The web server's directory (for SAPI modules), or directory of PHP
    ; (otherwise in Windows)
    ; 6. The directory from the --with-config-file-path compile time option, or the
    ; Windows directory (C:\windows or C:\winnt)
    ; See the PHP docs for more specific information.
    ; http://php.net/configuration.file
    ; The syntax of the file is extremely simple. Whitespace and lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives following the section heading [PATH=/www/mysite] only
    ; apply to PHP files in the /www/mysite directory. Directives
    ; following the section heading [HOST=www.example.com] only apply to
    ; PHP files served from www.example.com. Directives set in these
    ; special sections cannot be overridden by user-defined INI files or
    ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
    ; CGI/FastCGI.
    ; http://php.net/ini.sections
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; Directives are variables used to configure PHP or PHP extensions.
    ; There is no name validation. If PHP can't find an expected
    ; directive because it is not set or is mistyped, a default value will be used.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
    ; previously set variable or directive (e.g. ${foo})
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; ^ bitwise XOR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = None ; sets foo to an empty string
    ; foo = "None" ; sets foo to the string 'None'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; PHP comes packaged with two INI files. One that is recommended to be used
    ; in production environments and one that is recommended to be used in
    ; development environments.
    ; php.ini-production contains settings which hold security, performance and
    ; best practices at its core. But please be aware, these settings may break
    ; compatibility with older or less security conscience applications. We
    ; recommending using the production ini in production and testing environments.
    ; php.ini-development is very similar to its production variant, except it's
    ; much more verbose when it comes to errors. We recommending using the
    ; development version only in development environments as errors shown to
    ; application users can inadvertently leak otherwise secure information.
    ; Quick Reference ;
    ; The following are all the settings which are different in either the production
    ; or development versions of the INIs with respect to PHP's default behavior.
    ; Please see the actual settings later in the document for more details as to why
    ; we recommend these changes in PHP's behavior.
    ; display_errors
    Default Value: On
    Development Value: On
    Production Value: Off
    ; display_startup_errors
    Default Value: Off
    Development Value: On
    Production Value: Off
    ; error_reporting
    Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    Development Value: E_ALL
    Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; html_errors
    Default Value: On
    Development Value: On
    Production value: On
    ; log_errors
    Default Value: Off
    Development Value: On
    Production Value: On
    ; max_input_time
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; output_buffering
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; register_argc_argv
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; request_order
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; session.bug_compat_42
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.bug_compat_warn
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.gc_divisor
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; session.hash_bits_per_character
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; short_open_tag
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; track_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; url_rewriter.tags
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; variables_order
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS"
    ; php.ini Options ;
    ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
    ;user_ini.filename = ".user.ini"
    ; To disable this feature set this option to empty value
    ;user_ini.filename =
    ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
    ;user_ini.cache_ttl = 300
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    ; http://php.net/engine
    engine = On
    ; This directive determines whether or not PHP will recognize code between
    ; <? and ?> tags as PHP source which should be processed as such. It's been
    ; recommended for several years that you not use the short tag "short cut" and
    ; instead to use the full <?php and ?> tag combination. With the wide spread use
    ; of XML and use of these tags by other languages, the server can become easily
    ; confused and end up parsing the wrong code in the wrong context. But because
    ; this short cut has been a feature for such a long time, it's currently still
    ; supported for backwards compatibility, but we recommend you don't use them.
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/short-open-tag
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    ; http://php.net/asp-tags
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    ; http://php.net/precision
    precision = 14
    ; Output buffering is a mechanism for controlling how much output data
    ; (excluding headers and cookies) PHP should keep internally before pushing that
    ; data to the client. If your application's output exceeds this setting, PHP
    ; will send that data in chunks of roughly the size you specify.
    ; Turning on this setting and managing its maximum buffer size can yield some
    ; interesting side-effects depending on your application and web server.
    ; You may be able to send headers and cookies after you've already sent output
    ; through print or echo. You also may see performance benefits if your server is
    ; emitting less packets due to buffered output versus PHP streaming the output
    ; as it gets it. On production servers, 4096 bytes is a good setting for performance
    ; reasons.
    ; Note: Output buffering can also be controlled via Output Buffering Control
    ; functions.
    ; Possible Values:
    ; On = Enabled and buffer is unlimited. (Use with caution)
    ; Off = Disabled
    ; Integer = Enables the buffer and sets its maximum size in bytes.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; http://php.net/output-buffering
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ; http://php.net/output-handler
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    ; http://php.net/zlib.output-compression
    zlib.output_compression = Off
    ; http://php.net/zlib.output-compression-level
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ; http://php.net/zlib.output-handler
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    ; http://php.net/implicit-flush
    ; Note: This directive is hardcoded to On for the CLI SAPI
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated. A warning appears if the specified function is
    ; not defined, or if the function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func =
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 17
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/open-basedir
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/:/home/albert/Dropbox/bitday/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-functions
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-classes
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ; http://php.net/syntax-highlighting
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long requests, which may end up
    ; being interrupted by the user or a browser timing out. PHP's default behavior
    ; is to disable this feature.
    ; http://php.net/ignore-user-abort
    ;ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; http://php.net/realpath-cache-size
    ;realpath_cache_size = 16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; http://php.net/realpath-cache-ttl
    ;realpath_cache_ttl = 120
    ; Enables or disables the circular reference collector.
    ; http://php.net/zend.enable-gc
    zend.enable_gc = On
    ; If enabled, scripts may be written in encodings that are incompatible with
    ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
    ; encodings. To use this feature, mbstring extension must be enabled.
    ; Default: Off
    ;zend.multibyte = Off
    ; Allows to set the default encoding for the scripts. This value will be used
    ; unless "declare(encoding=...)" directive appears at the top of the script.
    ; Only affects if zend.multibyte is set.
    ; Default: ""
    ;zend.script_encoding =
    ; Miscellaneous ;
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    ; http://php.net/expose-php
    expose_php = On
    ; Resource Limits ;
    ; Maximum execution time of each script, in seconds
    ; http://php.net/max-execution-time
    ; Note: This directive is hardcoded to 0 for the CLI SAPI
    max_execution_time = 30
    ; Maximum amount of time each script may spend parsing request data. It's a good
    ; idea to limit this time on productions servers in order to eliminate unexpectedly
    ; long running scripts.
    ; Note: This directive is hardcoded to -1 for the CLI SAPI
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; http://php.net/max-input-time
    max_input_time = 60
    ; Maximum input variable nesting level
    ; http://php.net/max-input-nesting-level
    ;max_input_nesting_level = 64
    ; How many GET/POST/COOKIE input variables may be accepted
    ; max_input_vars = 1000
    ; Maximum amount of memory a script may consume (128MB)
    ; http://php.net/memory-limit
    memory_limit = 128M
    ; Error handling and logging ;
    ; This directive informs PHP of which errors, warnings and notices you would like
    ; it to take action for. The recommended way of setting values for this
    ; directive is through the use of the error level constants and bitwise
    ; operators. The error level constants are below here for convenience as well as
    ; some common settings and their meanings.
    ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
    ; those related to E_NOTICE and E_STRICT, which together cover best practices and
    ; recommended coding standards in PHP. For performance reasons, this is the
    ; recommend error reporting setting. Your production server shouldn't be wasting
    ; resources complaining about best practices and coding standards. That's what
    ; development servers and development settings are for.
    ; Note: The php.ini-development file has this setting as E_ALL. This
    ; means it pretty much reports everything which is exactly what you want during
    ; development and early testing.
    ; Error Level Constants:
    ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; E_DEPRECATED - warn about code that will not work in future versions
    ; of PHP
    ; E_USER_DEPRECATED - user-generated deprecation warnings
    ; Common Values:
    ; E_ALL (Show all errors, warnings and notices including coding standards.)
    ; E_ALL & ~E_NOTICE (Show all errors, except for notices)
    ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
    ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; http://php.net/error-reporting
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; This directive controls whether or not and where PHP will output errors,
    ; notices and warnings too. Error output is very useful during development, but
    ; it could be very dangerous in production environments. Depending on the code
    ; which is triggering the error, sensitive information could potentially leak
    ; out of your application such as database usernames and passwords or worse.
    ; It's recommended that errors be logged on production servers rather than
    ; having the errors sent to STDOUT.
    ; Possible Values:
    ; Off = Do not display any errors
    ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout = Display errors to STDOUT
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-errors
    display_errors = Off
    ; The display of errors which occur during PHP's startup sequence are handled
    ; separately from display_errors. PHP's default behavior is to suppress those
    ; errors from clients. Turning the display of startup errors on can be useful in
    ; debugging configuration problems. But, it's strongly recommended that you
    ; leave this setting off on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-startup-errors
    display_startup_errors = Off
    ; Besides displaying errors, PHP can also log errors to locations such as a
    ; server-specific log, STDERR, or a location specified by the error_log
    ; directive found below. While errors should not be displayed on productions
    ; servers they should still be monitored and logging is a great way to do that.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/log-errors
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    ; http://php.net/log-errors-max-len
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ; http://php.net/ignore-repeated-errors
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ; http://php.net/ignore-repeated-source
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    ; http://php.net/report-memleaks
    report_memleaks = On
    ; This setting is on by default.
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean). Setting this value
    ; to On can assist in debugging and is appropriate for development servers. It should
    ; however be disabled on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/track-errors
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ; http://php.net/xmlrpc-errors
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; When PHP displays or logs an error, it has the capability of formatting the
    ; error message as HTML for easier reading. This directive controls whether
    ; the error message is formatted as HTML or not.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; http://php.net/html-errors
    html_errors = On
    ; If html_errors is set to On *and* docref_root is not empty, then PHP
    ; produces clickable error messages that direct to a page describing the error
    ; or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://php.net/docs
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot. PHP's default behavior is to leave these settings empty, in which
    ; case no links to documentation are generated.
    ; Note: Never use this feature for production boxes.
    ; http://php.net/docref-root
    ; Examples
    ;docref_root = "/phpmanual/"
    ; http://php.net/docref-ext
    ;docref_ext = .html
    ; String to output before an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-prepend-string
    ; Example:
    ;error_prepend_string = "<span style='color: #ff0000'>"
    ; String to output after an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-append-string
    ; Example:
    ;error_append_string = "</span>"
    ; Log errors to specified file. PHP's default behavior is to leave this value
    ; empty.
    ; http://php.net/error-log
    ; Example:
    ;error_log = php_errors.log
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ;windows.show_crt_warning
    ; Default value: 0
    ; Development value: 0
    ; Production value: 0
    ; Data Handling ;
    ; The separator used in PHP generated URLs to separate arguments.
    ; PHP's default setting is "&".
    ; http://php.net/arg-separator.output
    ; Example:
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; PHP's default setting is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ; http://php.net/arg-separator.input
    ; Example:
    ;arg_separator.input = ";&"
    ; This directive determines which super global arrays are registered when PHP
    ; starts up. G,P,C,E & S are abbreviations for the following respective super
    ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
    ; paid for the registration of these arrays and because ENV is not as commonly
    ; used as the others, ENV is not recommended on productions servers. You
    ; can still get access to the environment variables through getenv() should you
    ; need to.
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS";
    ; http://php.net/variables-order
    variables_order = "GPCS"
    ; This directive determines which super global data (G,P,C,E & S) should
    ; be registered into the super global array REQUEST. If so, it also determines
    ; the order in which that data is registered. The values for this directive are
    ; specified in the same manner as the variables_order directive, EXCEPT one.
    ; Leaving this value empty will cause PHP to use the value set in the
    ; variables_order directive. It does not mean it will leave the super globals
    ; array REQUEST empty.
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; http://php.net/request-order
    request_order = "GP"
    ; This directive determines whether PHP registers $argv & $argc each time it
    ; runs. $argv contains an array of all the arguments passed to PHP when a script
    ; is invoked. $argc contains an integer representing the number of arguments
    ; that were passed when the script was invoked. These arrays are extremely
    ; useful when running scripts from the command line. When this directive is
    ; enabled, registering these variables consumes CPU cycles and memory each time
    ; a script is executed. For performance reasons, this feature should be disabled
    ; on production servers.
    ; Note: This directive is hardcoded to On for the CLI SAPI
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/register-argc-argv
    register_argc_argv = Off
    ; When enabled, the ENV, REQUEST and SERVER variables are created when they're
    ; first used (Just In Time) instead of when the script starts. If these
    ; variables are not used within a script, having this directive on will result
    ; in a performance gain. The PHP directive register_argc_argv must be disabled
    ; for this directive to have any affect.
    ; http://php.net/auto-globals-jit
    auto_globals_jit = On
    ; Whether PHP will read the POST data.
    ; This option is enabled by default.
    ; Most likely, you won't want to disable this option globally. It causes $_POST
    ; and $_FILES to always be empty; the only way you will be able to read the
    ; POST data will be through the php://input stream wrapper. This can be useful
    ; to proxy requests or to process the POST data in a memory efficient fashion.
    ; http://php.net/enable-post-data-reading
    ;enable_post_data_reading = Off
    ; Maximum size of POST data that PHP will accept.
    ; Its value may be 0 to disable the limit. It is ignored if POST data reading
    ; is disabled through enable_post_data_reading.
    ; http://php.net/post-max-size
    post_max_size = 8M
    ; Automatically add files before PHP document.
    ; http://php.net/auto-prepend-file
    auto_prepend_file =
    ; Automatically add files after PHP document.
    ; http://php.net/auto-append-file
    auto_append_file =
    ; By default, PHP will output a character encoding using
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    ; http://php.net/default-mimetype
    default_mimetype = "text/html"
    ; PHP's default character set is set to empty.
    ; http://php.net/default-charset
    ;default_charset = "UTF-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
    ; to disable this feature. If post reading is disabled through
    ; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
    ; http://php.net/always-populate-raw-post-data
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    ; PHP's default setting for include_path is ".;/path/to/php/pear"
    ; http://php.net/include-path
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    ; http://php.net/doc-root
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    ; http://php.net/user-dir
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    ; http://php.net/extension-dir
    extension_dir = "/usr/lib/php/modules/"
    ; On windows:
    ; extension_dir = "ext"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    ; http://php.net/enable-dl
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; http://php.net/cgi.force-redirect
    ;cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request. PHP's default behavior is to disable this feature.
    ;cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; http://php.net/cgi.redirect-status-env
    ;cgi.redirect_status_env =
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; http://php.net/cgi.fix-pathinfo
    ;cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; http://php.net/fastcgi.impersonate
    ;fastcgi.impersonate = 1
    ; Disable logging through FastCGI connection. PHP's default behavior is to enable
    ; this feature.
    ;fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ; http://php.net/cgi.rfc2616-headers
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    ; http://php.net/file-uploads
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ; http://php.net/upload-tmp-dir
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    ; http://php.net/upload-max-filesize
    upload_max_filesize = 2M
    ; Maximum number of files that can be uploaded via a single request
    max_file_uploads = 20
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-fopen
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-include
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address). PHP's default setting
    ; for this is empty.
    ; http://php.net/from
    ;from="[email protected]"
    ; Define the User-Agent string. PHP's default setting for this is empty.
    ; http://php.net/user-agent
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    ; http://php.net/default-socket-timeout
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; http://php.net/auto-detect-line-endings
    ;auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; ... or with a path:
    ; extension=/path/to/extension/msql.so
    ; If you only provide the name of the extension, PHP will look for it in its
    ; default extension directory.
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    extension=curl.so
    ;extension=dba.so
    ;extension=enchant.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=intl.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mssql.so
    ;extension=mysqli.so
    ;extension=mysql.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=phar.so
    ;extension=posix.so
    ;extension=pspell.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite3.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    ; Module Settings ;
    [CLI Server]
    ; Whether the CLI web server uses ANSI color coding in its terminal output.
    cli_server.color = On
    [Date]
    ; Defines the default timezone used by the date functions
    ; http://php.net/date.timezone
    ;date.timezone =
    ; http://php.net/date.default-latitude
    ;date.default_latitude = 31.7667
    ; http://php.net/date.default-longitude
    ;date.default_longitude = 35.2333
    ; http://php.net/date.sunrise-zenith
    ;date.sunrise_zenith = 90.583333
    ; http://php.net/date.sunset-zenith
    ;date.sunset_zenith = 90.583333
    [filter]
    ; http://php.net/filter.default
    ;filter.default = unsafe_raw
    ; http://php.net/filter.default-flags
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [intl]
    ;intl.default_locale =
    ; This directive allows you to produce PHP errors when some error
    ; happens within intl functions. The value is the level of the error produced.
    ; Default is 0, which does not produce any errors.
    ;intl.error_level = E_WARNING
    [sqlite]
    ; http://php.net/sqlite.assoc-case
    ;sqlite.assoc_case = 0
    [sqlite3]
    ;sqlite3.extension_dir =
    [Pcre]
    ;PCRE library backtracking limit.
    ; http://php.net/pcre.backtrack-limit
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ; http://php.net/pcre.recursion-limit
    ;pcre.recursion_limit=100000
    [Pdo]
    ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
    ; http://php.net/pdo-odbc.connection-pooling
    ;pdo_odbc.connection_pooling=strict
    ;pdo_odbc.db2_instance_name
    [Pdo_mysql]
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/pdo_mysql.cache_size
    pdo_mysql.cache_size = 2000
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/pdo_mysql.default-socket
    pdo_mysql.default_socket=
    [Phar]
    ; http://php.net/phar.readonly
    ;phar.readonly = On
    ; http://php.net/phar.require-hash
    ;phar.require_hash = On
    ;phar.cache_list =
    [mail function]
    ; For Win32 only.
    ; http://php.net/smtp
    SMTP = localhost
    ; http://php.net/smtp-port
    smtp_port = 25
    ; For Win32 only.
    ; http://php.net/sendmail-from
    ;sendmail_from = [email protected]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ; http://php.net/sendmail-path
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
    mail.add_x_header = On
    ; The path to a log file that will log all mail() calls. Log entries include
    ; the full path of the script, line number, To address and headers.
    ;mail.log =
    ; Log mail to syslog (Event Log on NT, not valid in Windows 95).
    ;mail.log = syslog
    [SQL]
    ; http://php.net/sql.safe-mode
    sql.safe_mode = Off
    [ODBC]
    ; http://php.net/odbc.default-db
    ;odbc.default_db = Not yet implemented
    ; http://php.net/odbc.default-user
    ;odbc.default_user = Not yet implemented
    ; http://php.net/odbc.default-pw
    ;odbc.default_pw = Not yet implemented
    ; Controls the ODBC cursor model.
    ; Default: SQL_CURSOR_STATIC (default).
    ;odbc.default_cursortype
    ; Allow or prevent persistent links.
    ; http://php.net/odbc.allow-persistent
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    ; http://php.net/odbc.check-persistent
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/odbc.max-persistent
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/odbc.max-links
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    ; http://php.net/odbc.defaultlrl
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of odbc.defaultlrl and odbc.defaultbinmode
    ; http://php.net/odbc.defaultbinmode
    odbc.defaultbinmode = 1
    ;birdstep.max_links = -1
    [Interbase]
    ; Allow or prevent persistent links.
    ibase.allow_persistent = 1
    ; Maximum number of persistent links. -1 means no limit.
    ibase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ibase.max_links = -1
    ; Default database name for ibase_connect().
    ;ibase.default_db =
    ; Default username for ibase_connect().
    ;ibase.default_user =
    ; Default password for ibase_connect().
    ;ibase.default_password =
    ; Default charset for ibase_connect().
    ;ibase.default_charset =
    ; Default timestamp format.
    ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
    ; Default date format.
    ibase.dateformat = "%Y-%m-%d"
    ; Default time format.
    ibase.timeformat = "%H:%M:%S"
    [MySQL]
    ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
    ; http://php.net/mysql.allow_local_infile
    mysql.allow_local_infile = On
    ; Allow or prevent persistent links.
    ; http://php.net/mysql.allow-persistent
    mysql.allow_persistent = On
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/mysql.cache_size
    mysql.cache_size = 2000
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/mysql.max-persistent
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/mysql.max-links
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    ; http://php.net/mysql.default-port
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/mysql.default-socket
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysql.default-host
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysql.default-user
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    ; http://php.net/mysql.default-password
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    ; http://php.net/mysql.connect-timeout
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    ; http://php.net/mysql.trace-mode
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/mysqli.max-persistent
    mysqli.max_persistent = -1
    ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
    ; http://php.net/mysqli.allow_local_infile
    ;mysqli.allow_local_infile = On
    ; Allow or prevent persistent links.
    ; http://php.net/mysqli.allow-persistent
    mysqli.allow_persistent = On
    ; Maximum number of links. -1 means no limit.
    ; http://php.net/mysqli.max-links
    mysqli.max_links = -1
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/mysqli.cache_size
    mysqli.cache_size = 2000
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    ; http://php.net/mysqli.default-port
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/mysqli.default-socket
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysqli.default-host
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysqli.default-user
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    ; http://php.net/mysqli.default-pw
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mysqlnd]
    ; Enable / Disable collection of general statistics by mysqlnd which can be
    ; used to tune and monitor MySQL operations.
    ; http://php.net/mysqlnd.collect_statistics
    mysqlnd.collect_statistics = On
    ; Enable / Disable collection of memory usage statistics by mysqlnd which can be
    ; used to tune and monitor MySQL operations.
    ; http://php.net/mysqlnd.collect_memory_statistics
    mysqlnd.collect_memory_statistics = Off
    ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
    ; http://php.net/mysqlnd.net_cmd_buffer_size
    ;mysqlnd.net_cmd_buffer_size = 2048
    ; Size of a pre-allocated buffer used for reading data sent by the server in
    ; bytes.
    ; http://php.net/mysqlnd.net_read_buffer_size
    ;mysqlnd.net_read_buffer_size = 32768
    [OCI8]
    ; Connection: Enables privileged connections using external
    ; credentials (OCI_SYSOPER, OCI_SYSDBA)
    ; http://php.net/oci8.privileged-connect
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ; http://php.net/oci8.max-persistent
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ; http://php.net/oci8.persistent-timeout
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ; http://php.net/oci8.ping-interval
    ;oci8.ping_interval = 60
    ; Connection: Set this to a user chosen connection class to be used
    ; for all pooled server requests with Oracle 11g Database Resident
    ; Connection Pooling (DRCP). To use DRCP, this value should be set to
    ; the same string for all web servers running the same application,
    ; the database pool must be configured, and the connection string must
    ; specify to use a pooled server.
    ;oci8.connection_class =
    ; High Availability: Using On lets PHP receive Fast Application
    ; Notification (FAN) events generated when a database node fails. The
    ; database must also be configured to post FAN events.
    ;oci8.events = Off
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ; http://php.net/oci8.statement-cache-size
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ; http://php.net/oci8.default-prefetch
    ;oci8.default_prefetch = 100
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ; http://php.net/oci8.old-oci-close-semantics
    ;oci8.old_oci_close_semantics = Off
    [PostgreSQL]
    ; Allow or prevent persistent links.
    ; http://php.net/pgsql.allow-persistent
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    ; http://php.net/pgsql.auto-reset-persistent
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/pgsql.max-persistent
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    ; http://php.net/pgsql.max-links
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    ; http://php.net/pgsql.ignore-notice
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Notice message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    ; http://php.net/pgsql.log-notice
    pgsql.log_notice = 0
    [Sybase-CT]
    ; Allow or prevent persistent links.
    ; http://php.net/sybct.allow-persistent
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/sybct.max-persistent
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/sybct.max-links
    sybct.max_links = -1
    ; Minimum server message severity to display.
    ; http://php.net/sybct.min-server-severity
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    ; http://php.net/sybct.min-client-severity
    sybct.min_client_severity = 10
    ; Set per-context timeout
    ; http://php.net/sybct.timeout
    ;sybct.timeout=
    ;sybct.packet_size
    ; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
    ; Default: one minute
    ;sybct.login_timeout=
    ; The name of the host you claim to be connecting from, for display by sp_who.
    ; Default: none
    ;sybct.hostname=
    ; Allows you to define how often deadlocks are to be retried. -1 means "forever".
    ; Default: 0
    ;sybct.deadlock_retry_count=
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    ; http://php.net/bcmath.scale
    bcmath.scale = 0
    [browscap]
    ; http://php.net/browscap
    ;browscap = extra/browscap.ini
    [Session]
    ; Handler used to store/retrieve data.
    ; http://php.net/session.save-handler
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored. Note: Windows users have to change this
    ; variable in order to use PHP's session functions.
    ; The path can be defined as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    ; http://php.net/session.save-path
    ;session.save_path = "/tmp"
    ; Whether to use cookies.
    ; http://php.net/session.use-cookies
    session.use_cookies = 1
    ; http://php.net/session.cookie-secure
    ;session.cookie_secure =
    ; This option forces PHP to fetch and use a cookie for storing and maintaining
    ; the session id. We encourage this operation as it's very helpful in combating
    ; session hijacking when not specifying and managing your own session id. It is
    ; not the end all be all of session hijacking defense, but it's a good start.
    ; http://php.net/session.use-only-cookies
    session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    ; http://php.net/session.name
    session.name = PHPSESSID
    ; Initialize session on request startup.
    ; http://php.net/session.auto-start
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    ; http://php.net/session.cookie-lifetime
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    ; http://php.net/session.cookie-path
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    ; http://php.net/session.cookie-domain
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    ; http://php.net/session.cookie-httponly
    session.cookie_httponly =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    ; http://php.net/session.serialize-handler
    session.serialize_handler = php
    ; Defines the probability that the 'garbage collection' process is started
    ; on every session initialization. The probability is calculated by using
    ; gc_probability/gc_divisor. Where session.gc_probability is the numerator
    ; and gc_divisor is the denominator in the equation. Setting this value to 1
    ; when the session.gc_divisor value is 100 will give you approximately a 1% chance
    ; the gc will run on any give request.
    ; Default Value: 1
    ; Development Value: 1
    ; Production Value: 1
    ; http://php.net/session.gc-probability
    session.gc_probability = 1
    ; Defines the probability that the 'garbage collection' process is started on every
    ; session initialization. The probability is calculated by using the following equation:
    ; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
    ; session.gc_divisor is the denominator in the equation. Setting this value to 1
    ; when the session.gc_divisor value is 100 will give you approximately a 1% chance
    ; the gc will run on any give request. Increasing this value to 1000 will give you
    ; a 0.1% chance the gc will run on any give request. For high volume production servers,
    ; this is a more efficient approach.
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; http://php.net/session.gc-divisor
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    ; http://php.net/session.gc-maxlifetime
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; find /path/to/sessions -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope.
    ; PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled. This feature
    ; introduces some serious security problems if not handled correctly. It's
    ; recommended that you do not use this feature on production servers. But you
    ; should enable this on development servers and enable the warning as well. If you
    ; do not enable the feature on development servers, you won't be warned when it's
    ; used and debugging errors caused by this can be difficult to track down.
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/session.bug-compat-42
    session.bug_compat_42 = Off
    ; This setting controls whether or not you are warned by PHP when initializing a
    ; session value into the global space. session.bug_compat_42 must be enabled before
    ; these warnings can be issued by PHP. See the directive above for more information.
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/session.bug-compat-warn
    session.bug_compat_warn = Off
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    ; http://php.net/session.referer-check
    session.referer_check =
    ; How many bytes to read from the file.
    ; http://php.net/session.entropy-length
    ;session.entropy_length = 32
    ; Specified here to create the session id.
    ; http://php.net/session.entropy-file
    ; Defaults to /dev/urandom
    ; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
    ; If neither are found at compile time, the default is no entropy file.
    ; On windows, setting the entropy_length setting will activate the
    ; Windows random source (using the CryptoAPI)
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    ; http://php.net/session.cache-limiter
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    ; http://php.net/session.cache-expire
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publicly accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    ; http://php.net/session.use-trans-sid
    session.use_trans_sid = 0
    ; Select a hash function for use in generating session ids.
    ; Possible Values
    ; 0 (MD5 128 bits)
    ; 1 (SHA-1 160 bits)
    ; This option may also be set to the name of any hash function supported by
    ; the hash extension. A list of available hashes is returned by the hash_algos()
    ; function.
    ; http://php.net/session.hash-function
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; Possible values:
    ; 4 (4 bits: 0-9, a-f)
    ; 5 (5 bits: 0-9, a-v)
    ; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; http://php.net/session.hash-bits-per-character
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; http://php.net/url-rewriter.tags
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Enable upload progress tracking in $_SESSION
    ; Default Value: On
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/session.upload-progress.enabled
    ;session.upload_progress.enabled = On
    ; Cleanup the progress information as soon as all POST data has been read
    ; (i.e. upload completed).
    ; Default Value: On
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/session.upload-progress.cleanup
    ;session.upload_progress.cleanup = On
    ; A prefix used for the upload progress key in $_SESSION
    ; Default Value: "upload_progress_"
    ; Development Value: "upload_progress_"
    ; Production Value: "upload_progress_"
    ; http://php.net/session.upload-progress.prefix
    ;session.upload_progress.prefix = "upload_progress_"
    ; The index name (concatenated with the prefix) in $_SESSION
    ; containing the upload progress information
    ; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
    ; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
    ; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
    ; http://php.net/session.upload-progress.name
    ;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
    ; How frequently the upload progress should be updated.
    ; Given either in percentages (per-file), or in bytes
    ; Default Value: "1%"
    ; Development Value: "1%"
    ; Production Value: "1%"
    ; http://php.net/session.upload-progress.freq
    ;session.upload_progress.freq = "1%"
    ; The minimum delay between updates, in seconds
    ; Default Value: 1
    ; Development Value: 1
    ; Production Value: 1
    ; http://php.net/session.upload-progress.min-freq
    ;session.upload_progress.min_freq = "1"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.conf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ; http://php.net/assert.active
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ; http://php.net/assert.warning
    ;assert.warning = On
    ; Don't bail out by default.
    ; http://php.net/assert.bail
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ; http://php.net/assert.callback
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ; http://php.net/assert.quiet-eval
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ; http://php.net/com.typelib-file
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ; http://php.net/com.allow-dcom
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ; http://php.net/com.autoregister-typelib
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ; http://php.net/com.autoregister-casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ; http://php.net/com.autoregister-verbose
    ;com.autoregister_verbose = true
    ; The default character set code-page to use when passing strings to and from COM objects.
    ; Default: system ANSI code page
    ;com.code_page=
    [mbstring]
    ; language for internal character representation.
    ; http://php.net/mbstring.language
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ; http://php.net/mbstring.internal-encoding
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ; http://php.net/mbstring.http-input
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ; http://php.net/mbstring.http-output
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ; http://php.net/mbstring.encoding-translation
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ; http://php.net/mbstring.detect-order
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ; http://php.net/mbstring.substitute-character
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ; http://php.net/mbstring.func-overload
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_detection = Off
    ; This directive specifies the regex pattern of content types for which mb_output_handler()
    ; is activated.
    ; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
    ;mbstring.http_output_conv_mimetype=
    [gd]
    ; Tell the jpeg decode to ignore warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ; http://php.net/gd.jpeg-ignore-warning
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings

    Hi, everything in the "Quick Reference" section should be commented out with ;
    You should change those settings further down in the php.ini file.
    Example:
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    display_errors = Off
    Last edited by adrianx (2013-07-26 12:32:02)

  • Source code has syntax error in SAP PI7.1 Mapping Test

    HI All,
    IN SAP P7.1  created simple two data types, message types and Message Mapping with only 2 fields. While testing the mapping in Message Mapping it is giving the error as
    Source text of object Message Mapping: MM_Source_to_Target | http://abc.com has syntax errors:
    Source code has syntax error:
    I am able to activate the Datatypes and Message Types but not able to activate the Messge mapping.
    Please if any body faced the same problem please give the solution.
    One more thing is I am able to test the Message Mapping available in BASIS 7.1 Software Component objects. It is executing successfully...
    but otherthan this SWC it not working success fully.....
    Regards
    Sridhar Goli

    Hi David,
    please check the default trace. It may contain the entry:
    Error in compiling : java.io.IOException: Not enough space
    If that's the case, maybe there's too little space for the swap file/device.
    You should ensure that at least 2X (preferably 3X) of Heap (-Xmx) is configured as real swap
    Hope that helps.
    Regards,
    Gábor Klauzer

  • Start Routine: Syntax error in routine 2LIS_03_BF Transformations

    Hi experts,
    I enhanced the 2lis_03_bf data source, and replicated the data source in bw system, i have mapped the transformations and when i try to activate the transformations it is giving the below error.
    Start Routine: Syntax error in routine
    when i check the start routine it is giving the  below error message.
    E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
    "SOURCE_PACKAGE" is incompatible with the formal parameter
    "DATA_PACKAGE".
    please provide me the solution.
    Regards
    venuscm

    Hi Venu,
    This seems to me like you have earlier migrated the update rules to transformations. We did the same earlier and faced issues whenever we add new fields/infoobjects. The error message was different, if i remember correctly.
    We had to add the new field/infoobject added, to the structure '_ty_s_*****' that exists at the top of the start routine code. This was one disadvantage of migration of rules.

Maybe you are looking for