Non cummu kf

if we use non cumm kf the sata is not displayed in infocube .
but it is displayed in f-fact table.
infocube is combination of both fact and dimension tables.
then why it is displayed in fact table but not in infocube contents?

Hi,
Non-Cumulative Key Figures are combination of two keyfigures Eg: You can see these kind of Non-Cumulative Key Figures in 0IC_C03 Inventory Cube.
Non-Cumulative Key Figures :
A non-cumulative key figure is modeled in BI using the corresponding field for the non-cumulative value change or the corresponding fields for inflows or outflows in the InfoObject maintenance. You can determine the current non-cumulative or the non-cumulative at a particular point in time. To do so, you use the current, end non-cumulative and the non-cumulative changes and/or the inflows and outflows.
The aim of the special folder for non-cumulative key figures is to optimize the data transport into the BI system, to retain data, and to access the database when evaluating for reports in the BI system.
Whether the modeling of non-cumulatives with non-cumulative key figures is useful depends on your scenario. It is recommended that you use non-cumulative key figures for areas in which non-cumulatives do not regularly change completely, for example with warehouse stock (retail) or with the number of employees
See in help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/content.htm
Thanks
Reddy

Similar Messages

Windows no longer detecting my Audigy 4?(Non-P

Hey all. I've had my Audigy 4 (non-Pro) installed and working super for about 50 days, but it started giving me a weird problem. Windows was no longer detecting the card! It was weird. DX Diag, programs like EVEREST... they all report no sound card whatsoever.
Here are my PC specs:
XP Home Edition
Albatron K8X800 Pro
S754 3200+ ClawHammer
x 2 OCZ ELPE 52 MB(2-3-2-5)
Visiontek XTASY X850XT PE
x 80 GB SATA 2 Seagate, x 80 GB Maxtor
Some other things to note:
XP has been repaired. Went from Service Pack , updates, and all the way to Service Pack 2. The card requires XP w/SP2, yes, so I have that covered.
Onboard audio is disabled through the bios. I have AC'97 integrated audio on this.
My motherboard has fi've PCI slots - although I can only access 4 because my video card is in the way, and I have tried three of those and I get the same problem.
I have tried it in other PCs in my house, double-checked each time - so it is not ESD as I originally believed. It works just fine on those PCs. It is being not located only on MY PC.
So guys and gals, I do not know what to do... I am stumped. It's the weekend so I can't call Creative support until Monday. I don't want to request an RMA through my warranty because clearly it's just a problem with my PC. What should I do?!Message Edited by Celsius on -26-2005 07:36 PM

Device not recognized in iTunes

SSO to Non-SAP using login-tickets

Hi all,
I'd like to set up an SSO connection to a non-SAP HTTP system by using the SSO web filter (iis_sso.dll) on IIS 5.0.
I've created an iView (using the application integrator) with the URL template : http://<ip-address-host>:82/reqvars.asp?<Authentication> in which <Authentication> is MYSAPSSO2=<Request.SSO2Ticket>. The reqvar.asp page comes with the web filter as an example and displays all HTTP header fields. That way you can check whether the user-ID has been extracted successfully from the SAP logon ticket. However, I fail to get any value into the REMOTE_USER variable. The ISAPI filter (iss_sso) has been installed (global) successfully.
I'm using the following settings in the verify.properties files:
remote_user_alias = REMOTE_USER
pse_file = C:\SSOFilter\verify.pse
application = portal
log_file = C:\SSOFilter\filter.log
log_level = 3
Remark: in the original example the remote_user_alias is set to REMOTE-USER: However, I feel this is wrong since the actual variable is REMOTE_USER. Also I have seen this one in another forum post as being a working properties file. Or should I use original value?
No entries are being written to the log so I believe nothing is happening at all.
The SSOFilter folder contains the following files:
iis_sso.dll
sapsecu.dll
sapsecu.lib
verify.properties
verify.pse
mfc71.dll, mfc71u.dll, msvcp71.dll, msvcr71.dll and sapsecin.exe
This folder also has been added to the environmental PATH variable.
Any suggestions would be highly appreciated (and rewarded ,
Frodo

Hi,
I dont have much info related but i can giv u hint
refer OSS Notes 442401 and 723896.
When using SAP logon tickets for non-SAP applications, two different implementation options are available. The difference lies in where the ticket verification takes place.
In the first case, the SAP logon ticket is submitted to the web server filter located on the web server. The web server filter verifies the portal serveru2019s public key
certificate using its local Personal Security Environment (PSE) and then populates the HTTP header field with the user ID for SSO to the non-sap web application.
In the second case, the SAP logon ticket is sent to the non-SAP application, which then verifies it using the ticket verification DLL and submits the user ID to the application for SSO.
You can refer following link :-
http://help.sap.com/saphelp_nw70/helpdata/EN/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
user authentication and SSO
http://help.sap.com/saphelp_nw70/helpdata/EN/8f/ae29411ab3db2be10000000a1550b0/frameset.htm
Authentication Using a Directory with SSO Integration Using Logon Tickets
http://help.sap.com/saphelp_nw70/helpdata/EN/f8/3b514ca29011d5bdeb006094191908/frameset.htm
SSO
SAP Logon Ticket-based Single Sign-On
http://help.sap.com/saphelp_nwce10/helpdata/en/45/b6af743753003ae10000000a11466f/frameset.htm

HT1933 I am having a problem where EVERY app on my iPhone suddenly started crashing and NONE of them are now usable.

No clue why. Includes apple apps. I have no idea *which* of the 500 apps I should select to report. None were new at the time it started…, etc. Just doing the same old things with the same old apps one day (and no recent updates) and the next day everything was crashing within 5-65 seconds of opening the app. It's been that way ever since. Usually crash time is closer to 5 seconds after touching the app. Occasioinally I can get up to 30-40.
I have tried removing individual apps and avoiding using individual apps (particularly those that I always use; again, this is inexplicable.)
I have tried resetting the phone (2 button hold)
I have tried restarting.
I have tried using only apple apps. The phone app is the only one that is mostly usuable; if they called me, and the phone app crashes, it puts the green message bar at the top and usually doesn't disconnect, but it's hard to test and I rarely use the phone. Sometimes after a phone call the iPhone will remain stable for as much as 20 minutes.
I have tried using only one app.
I have tried restoring to a backup.
I have tried restoring and using it with *no* backup. It seemed to work for nearly an hour, even after redownloading a few old apps to the phone via 3G; problem is I have a handful of apps with data in them that is very important to me and I do not know any other way to back them up and get their data back on the iPhone. If I can isolate these apps' backup data and reset everything else, I'd be willing to try it.
I was convinced it was a hardware issue until I got the brief apparent success with restoring with no backup. (above)
I need new ideas… I can always bite the bullet and get a new phone, but I really want to find out how to make sure this problem doesn't crop up again.

Have you tried clean up the apps in the multitask window?
On you iPhone, force close all the Apps in the multitask window.
Follow these steps to force an app to close:
From the Home screen, click the Home button twice.
Tap and hold on the app.
When it starts to jiggle, tap the to close it on eby one until all cleared
Now do a Soft reset of your iPad:
Hold both Home and Sleep button for around 10secs until you see the Apple logo then release. After it returns to Home screen, try your Apps again.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone?

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone? I can physically copy the tunes as mp3's but the phone does not seem to be able to play all of them. Do I need to copy an entire album or can I just pick & choose individual songs? The phone is question is an LG running who knows what for an operating system.

AAC is Advanced Audio Coding. Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD). More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder). Therefore your LG phone won't play them.
You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button. Change the AAC Encoder to MP3 Encoder. After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version." You'll get a copy of the song that should transfer to your SD card and have MP3 encoding. Hopefully your phone will play that.

How can I use Messages app on non-Verizon phone?

Hi. I have two phones: A VZW personal phone and a T-Mobile phone from my employer. I wish to carry only one device when I'm at work (my T-Mobile work phone) but I wish to be able to get texts from my personal VZW number on that phone. I know I can't forward texts, so I installed the Verizon Messages Android app on my work phone, but I can't set it up with my VZW number (I figured it should work because I was able set it up on my tablet at home and it works fine there).
After I install the app on the non-Verizon phone, I open it and I get a screen asking me if I want to use the app for my default messaging app. If I click no, the app closes without giving me a chance to set it up with my personal account like it did when I installed it on my tablet.
I also noticed after I installed it, it's called Messages+ instead of Messages. Are they the same thing?

Hi, has this been resolved? I am in a very similar situation and need the app to work on my new Sprint LG G3 exactly the way it operated on my Sprint iPhone 5S. Here is how it worked on my Sprint iPhone: downloaded the VZ Messages app, followed the prompts to tie it into my work Verizon Galaxy S5 number, and started to receive texts sent to my S5 on my iPhone but in the separate VZ Messages app and not in the native iPhone messages app.
But when I install the VZ Messages app on my Sprint LG G3, it only asks if I want to "Change default message app? Use Message+ instead of Messaging as your default message application?" That is not what I want so I tap "Cancel" and the app closes. I am not prompted with the opportunity to tie it to my Verizon S5 number like I was on the iPhone. The ability to have the VZ Messages app on my Sprint LG G3 along side the native G3 messaging app, the exact same way it worked on my Sprint iPhone, is very important and the whole reason I switched from AT&T to Verizon for my work phone.

Report Builder Wizard and Parameter Creation with values from other data source e.g. data set or views for non-IT users or Business Analysts

Hi,
"Report Builder is a report authoring environment for business users who prefer to work in the Microsoft Office environment.
You work with one report at a time. You can modify a published report directly from a report server. You can quickly build a report by adding items from the Report Part Gallery provided by report designers from your organization." - As mentioned
on TechNet.
I wonder how a non-technical business analyst can use Report Builder 3 to create ad-hoc reports/analysis with list of parameters based on other data sets.
Do they need to learn TSQL or how to add and link parameter in Report Builder? then How they can add parameter into a report. Not sure what i am missing from whole idea behind Report builder then?
I have SQL Server 2012 STD and Report Builder 3.0 and want to train non-technical users to create reports as per their need without asking to IT department.
Everything seems simple and working except parameters with list of values e.g. Sales year List, Sales Month List, Gender etc. etc.
So how they can configure parameters based on Other data sets?
Workaround in my mind is to create a report with most of columns and add most frequent parameters based on other data sets and then non-technical user modify that report according to their needs but that way its still restricting users to
a set of defined reports?
I want functionality like "Excel Power view parameters" into report builder which is driven from source data and which is only available Excel 2013 onward which most of people don't have yet.
So how to use Report Builder. Any other thoughts or workaround or guide me the purpose of Report Builder, please let me know.
Many thanks and Kind Regards,
For quick review of new features, try virtual labs: http://msdn.microsoft.com/en-us/aa570323

Hi Asam,
If we want to create a parameter depend on another dataset, we can additional create or add the dataset, embedded or shared, that has a query that contains query variables. Then use the option that “Get values from a
query” to get available values. For more details, please see:http://msdn.microsoft.com/en-us/library/dd283107.aspx
http://msdn.microsoft.com/en-us/library/dd220464.aspx
As to the Report Builder features, we can refer to the following articles:http://technet.microsoft.com/en-us/library/hh213578.aspx
http://technet.microsoft.com/en-us/library/hh965699.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Can Multiple email accounts on Galaxy S4 sync with iCloud & non-iCloud email?

Hello… has anyone successfully set up multiple email accounts (iCloud/Yahoo/AT&T/etc.) on their Samsung Galaxy S4 Jelly Bean 4.2? I searched the forums and it has been said that configuration settings depend on the combination of wireless service provider + device model + email providers + Android version.
My S4 is from AT&T and if this scenario can't work, I have to cancel my contract in a few days (although that would be the last resort). From checking the forums, not everyone has been able to get the S4 to work with iCloud. In my case, I hope to sync up with iCloud and non-iCloud email which might be trickier.
Here is one thread that helps with settings, but doesn't seem to address multiple or non-iCloud accounts: https://discussions.apple.com/message/22435596#22435596
Some background info…
Although Gmail just works on Android devices, I plan to primarily use Apple/Yahoo/AT&T email (at least initially).
I don’t yet have Apple mail/iCloud, but plan to. I am partially switched to the Mac (Mtn Lion), but haven’t completed the jump from Windows.
I don’t have an iPhone (so hopefully that makes the setup less complicated.)
I mostly care about email on the S4 (I’m not concerned about syncing up contacts, calendar, music, etc.).
Apologies for the long post, but hopefully I’ve included the necessary background info for the questions below:
Is it possible to setup multiple (iCloud/Yahoo/AT&T) emails on the Samsung Galaxy S4 from AT&T so that they sync nicely?
From the S4, if I reply to an email, will the Sender in the email reply be the same account which received the email? Or, (as I’ve read in the excerpt below) will the Sender for all email replies from the S4 be set from a fixed/primary account?
Although the first two questions above are the most urgent for now, I'd appreciate pointers if you see something that should be changed in the configuration settings below.
Thanks in advance!
--------------------------------- start of excerpt ---------------------------------
A post for setup on a previous model/OS version https://discussions.apple.com/thread/3636567?start=0&tstart=0
After spending quite some time trying to get my T-Mobile Samsung Galaxy S II setup with iCloud mail, this is what finally worked. Thanks to everyone for the various bits that helped lead me in the right direction. For those who need lots of detail, I hope the below helps. Please don't ask me about any other specific Android phones as I'm not expert but thought someone out there could benefit from my experience.
INCOMING SERVER SETTINGS
User Name: username (do not enter @me,com or @mac.com)
Password: (enter your password)
IMAP server: imap.mail.me.com
Security type: SSL
Port: 993
IMAP path prefix: p##- (you can find this by checking your account settings on your Mac. Mine was p03- so that's what I entered here)
Press NEXT
OUTGOING SERVER SETTINGS
SMTP server: smtp.mail.me.com
Security type: TLS
Port: 587
check the box next to "Require sign-in" if it's not already checked
User name: username (do not enter @me.com or @mac.com)
Password (enter your password)
Press NEXT
Your phone will check the server settings and you should be able to see your email now.
And another poster provided these additional tips…
Definitely select SSL/TLS and accept all certificates
Now here's the zinger: Authentication should be LOGIN
After figuring this out, I finally (after many hours of searching and testing) got to my outgoing server settings, which are: smtp.me.com
NONE for security type
Tic "Require Sign-in"
Authentication is PLAIN
And another poster's question about the Sender's email address for multiple accounts…
Managed to get this all set up however, Android only seems to allow you to send from your primary address and only reply from your primary address even if a mail was sent to one of the other addresses.
Any ideas how to get around this as I have three addresses beneath my primary which I need to both send from and reply from.
--------------------------------- end of excerpt ---------------------------------

> has anyone successfully set up multiple email accounts (iCloud/Yahoo/AT&T/etc.) on their Samsung Galaxy S4 Jelly Bean 4.2?
You're unlikely to find many people with experience of configuring multiple email accounts on a specific Samsung device, here on the Apple forum for an Apple service. Try the Samsung forums for help setting up your Samsung phone.
There are a few posts with general info relating to setting up an iCloud email account on Android here if you search though.

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects. What am I missing? Can I only use it via a non-password-protected wifi connection?

I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects. What am I missing? Can I only use it via a non-password-protected wifi connection?

Hi - you might want to post this question on the Apple TV area - you would probably get a quicker response - if you have a specific question relating to Apple routers then post back here

OK My mother at 92 has just mastered the iPad - I've set up an itunes account for her and want one simple thing explaining. She has a non iphone mobile and imessage on ipad so she can easily see it and use it HELP

Anyone who can expalin me how i can connect her non iphone (it lights up as she is very deaf like a chritmas tree so no i cant give he an iphone before anyone suggests) so i can get here to text via imessage on the ipad please.

I was hoping some tech wiz would have found an answer for you. The app below vibrates and flashes. Is that the kind of thing you're looking for? I'm not sure, because I am thinking you want your Mom's phone to somehow connect with ipad.
If you read the link I previously posted, please read the comments also. Maybe a suggestion in one of those would help.
http://appadvice.com/applists/show/apps-for-the-deaf
More App Info
description &
screenshots
$2.99Tap Tapby David Vondracek
One of the dangers of hearing loss is the inability to hear audible alerts or warnings. Tap Tap is a brilliant app that allows those with hearing loss to react to sounds. When it detects noise, the app will vibrate and flash to alert the user. If the door knocks, or someone is speaking or shouting, the user will know. If the smoke alarm goes off, Tap Tap will vibrate and flash. The sensitivity can be adjusted and the app can run in the background if desired, though this may use more battery power. This is a must-have app for anyone with significant hearing loss.

How can I share printers using a non apple router, imac to ipad?

Newbie in osx, but experienced in linux.
My new imac has 3 printers setup for sharing, but ipad 2 / iphone 4 fail to see them. I am using the belkin router that I owned already, instead of buying an Airport.
I found a solution at askubuntu.com Q 26130 at http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
I setup a linux machine on the network, with no physical connection to any printer. The 1st, an hp fax psc has a usb to imac, as the 2nd, an hp psc, the 3rd printer is an epson wireless, which is only connected on the network by wifi to the belkin router. I'm certain the imac "sharing" is properly setup, because the linux machine has no trouble finding the printers. Only the ipad / iphone have a problem.
Once I put the linux machine (with the above changes) on the network, everything works as desired. I can print on the ipad / iphone to any of the 3 printers, using the built in Airport printer routine (not the epson or hp apps). And the imax and linux machines can also print on all 3.
So, I suspect the imac isn't telling the router to display the printers on the network in a way that iOS can see them. I know it would work if I owned an Airport, but I'd rather not spend that much right now.
I'm sure someone knowledgable in OSX might have an idea where to stick an Airport definition file, created from the python script in askubuntu, that could solve this without having to run the linux laptop all the time. Any ideas?
TIA

It's possible to use free software (Virtualbox and Ubuntu) to fix the broken iOS 5 Airprint printing with non supported printers. Here's a fix that works on my imac, but should also work on even a windows pc.
My setup is a lion imac with 2 non-airprint supported usb printers attached, a belkin wifi router that provides network connectivity for my imac, ipad, and iphone.
Install ubuntu 11.10 in a virtualbox vm. Specify to use the "Bridged Adapter" with "en1: WiFi (AirPort)" for the network hardware. Make sure the imac's usb printers are setup with sharing. On ubuntu, select System Settings > Printers and add your imac's shared printers to the list. Then start ubuntu's firefox and set "localhost:631" in the address. On the administration tab, under the Server section, check "Share printers connected to this system" and hit Change Settings button to activate it. Go back to ubuntu's printer setup, and right click on each printer and check that the properties Policies tab does not have any messages about it being unshared. If so, then go back to firefox and make sure the Server sharing checkbox is enabled. It may help to reboot.
Fire up virtualbox to be able to use AirPort printing to your imac's usb printers, when you want to print from the iphone or ipad. This also works on iOS 5.
Only problem is error message from iphone to check the printer for errors, even though it actually prints ok.
references:
http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
https://lists.ubuntu.com/archives/ubuntu-devel/2011-June/033611.html

OWA Calendar not showing month view in non-IE browsers

I've got a user who can't see the Month view on his OWA calendar. He's the only user complaining - Month view loads fine on my Exchange account across all browsers and operating systems.
I can see the Month view on his account when I log in with IE, but not with any other browser, Windows and Mac.
Any ideas? I'm at a total loss here, I've been in and deleted recurring appointments, but nothing else looks out of the ordinary. Everything else works, it just won't load the month view in non-IE browsers and he's the only one affected.
Any clues appreciated, thank you!

Hi,
The Microsoft OWA web interface has two versions: OWA Premium and OWA Light. OWA Premium which can achieve calendar month view is only accessible when using Microsoft’s Internet Explorer browser.
If you’re using any other browser, we can use OWA Light. In light version, the OWA feature is not rich like OWA Premium. As for Calendar view, there is only daily view in OWA light.
About Calendar view in third-party browser, please contact the third-party browser support for more helps.
About Microsoft Outlook Web Access Light 2007, please refer to:
http://blogs.technet.com/b/exchange/archive/2006/09/13/3394870.aspx
Thanks,
Winnie

Does anybody have any solution for a non-functioning key on a macbook pro

Product Name: Macbook Pro 13", 5,5, Mid 2009
OSX: 10.6.8
Description of problem: The right arrow key will not work or function.
Other details: At startup, when a button either the Apple, Finder, File, etc are pressed the highlighter moves to the right and repeats moving to the right as if the right arrow key is stuck. When another key (any) is pressed it stops and all other keys function properly. The right arrow key will not work.
Steps I have tried to resolve the issue. Rebooting, SMC reset, removing key tab and cleaning.
Any ideas????

Hi JamilMereck,
first of: you can edit previous posts in a time-frame of some minutes (haven't measured it ...).
After that they become non-editable.
I admit I have used microphones some years back with and without PCs (have switched to Macs 2.5 years ago).
But I always had the mics connected to a mixing desk, which provided Phantom Power.
Since I gave up my 'Singing Career' (wasn't good enough) I also abandoned the use of microphones.
To your questions:
It might be that PCs with specified Microphone-In ports are also providing power to them or the microphones themselves do not need any power.
And the 'compatible with...' refers to the usage on computers in general.
The iMic from Griffin works with OSX 10.5 (scroll down on the webpage to 'Product Compatibility' the left icon symbolizes OSX 10.5).
As said above, I am no longer up-to-date in usage of microphones, but when you want to use a microphone with the standard connector you have to get either a microphone preamp or a mixer.
If you use the mic only (really only) with your Mac Pro, you might wanna look for USB-connected mics from Samson or Audio Technica for example.
And don't get upset, I understand you fully and any kind of 'insult' is for the manufacturers and not for me
Stefan

Non cummu kf

Similar Messages

Maybe you are looking for