Non cumulative document

Hi Ashish,
Could you please email me the non cumulative document you have to [email protected]
Thank you,
Prabhu.

Ok, I'm going to send it to you !
Hope it helps!
(and please don't forget to assign points too!!)
Bye,
Roberto

Similar Messages

Inventory cube non cumulative KF displaying incorrectly.

Hi
I have created a inventory cube which is a copy of 0IC_C03, fed from a DSO which has the all the Material documents.
I have intitialised using the BX extraxctor to the cube, then loading data from r/3 via the dso. Have MP on top of inventory and revaluation cube.
Due to an error in the code logic i had to drop the cube and reload the data from the BX PSA and subsequently the DSO.
my problem started then, the cumulative key figure have gone haywire ie they the balance display rubbish data. the data loaded into the cube is correct
also if I delete the latest request and reload the request, then the KF display correctly. strange!
I also the same problem for value as i have a revaluation cube. the inventory values are wrong, when i do a list cube from the MP all is ok.
i checked the validity slice rsdv, it is ok.
i also only have 0calday as the non cumulative setting.
Another thing i noticed was if filter the material by one plant then i get the correct value, if i try to display all plants then it all the balances go incorrect.
also if i see the balances by month only the latest month is incorrect.
if you need more info please feel free to ask.
appreciate if some can propose a solution
Lawrence
Edited by: lcoelho on Oct 14, 2011 7:03 PM

Hi Lawrence,
SAP suggests to upload non-cumulatives NEVER from a DSO but from the PSA in parallel to DSO and Cube.
Andreas

Maintaining non-cumulative values in Mlti provider

Can we maintain non ucmulative values inteh multi ptovider Extras - > Maintain non cumulative values section.
I created few new cubes which has non cumulative keyfigures . In the cube I made 0CAL DAY as reference characteristic and selected Company code (0COMP_CODE) and Posting date in the document (0PSTNG_DATE) as characteristics of validity table for non-cumulatives.
Now I inlcude the new cubes and identified the non cumulative key figures in the multi provider.
Now here also do I need to make 0CAL DAY as reference characteristic and selected Company code (0COMP_CODE) and Posting date in the document (0PSTNG_DATE) as characteristics of validity table for non-cumulatives.I did not find an option in Extras - > Maintain non cumulative values in multi provider. CAn we maintain non cumulatives in MP ?

Hello,
You dont need to maintain it at the MP level also.
Non-cumulative parameters are manitained only at the cube level.This was the case in 3.x so it should be the same in 7.0 also.
Regards
Ajeet

Non-cumulative values

HI All,
when I run a query of a non-cumulative infocube,there's always a "initial record" which actually doesn't exist in the fact table. Documents say "This entry does not remain physically in the table, but it is available for rebuilding the non-cumulative values". So where exactly is the initial value stored ?
Thanks
han.

Hi,
What is teh DataSource and InfoCube?
If you are talking about 0IC_C03, please see the steps.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
See about Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
Thanks
Reddy

How to create non cumulative Key Figure.

Friends Let me know steps for creating Non Cumulative Key Figure, can any one tell me where can i get documents for this. points will be rewarded

Hi,
check these help links
http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/95/1ae03b591a9c7ce10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6312e07211d2acb80000e829fbfe/content.htm
It's a big topic so it's not possible to write everything here.
You can search the forums also.
Thanks

How does Non-cumulative KeyFigure Works ?

Hi, experts !
What's the difference between the non-cumulative values of summation and of last value?
And how does non-cumulative value with in-flow and out-flow works?
Does anyone have relative documents?
Plz post a copy to my e-mail: [email protected]
Thank you very much !!!
Looking forwards !

Hi, Can you also send me the doc. My Id is [email protected]
Thanks,
Sam

Exception Aggregation (Average of all values 0) - Non cumulative KF

Hi Experts,
I am using the Exception Aggregation (Average of all values <> 0) on a Non Cumulative KF. Most of the times i am not getting the desired results but some times it gives me the desired result.
my doubt is whether we can use Exception Aggregation on Non cumulatives?????
Thanks for any help
boobal

Hi,
Non-cumulative valuesare those key figures that are measured in relation to a period in time; that is to say they cannot be meaningfully cumulated over time. Non-cumulative values are summarized over time using so-called exception aggregation.
Example:stock quantities/-values, number of employees, account balances, etc.
Please check this document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d61b1e95-0501-0010-dfbe-a03970712ef1
Hope this helps.
Regards,
Mona
Edited by: Mona Kapur on Jan 17, 2008 10:45 AM

Non- Cumulative KeyFigures

Hello Forum.
We have a non cumulative key figures with and Inflow keyfigure and an outflow with the aggregartion propery to SUM.
Can you please suggest how to verify the output of the non cumulative keyfigure ?
Is there any way to check the values of this non cumulative keyfigure ?
Thank you in advance .
Regards

Hello,
Possible verification methods are described below.
We recommend verification at plant/material number level (MatNo).
I. Verification of data from the 2LIS_03_BX or 2LIS_40_S278 DataSource
- Execute a corresponding query in BW.
- Use transaction code (TAC) LISTCUBE in BW to select the corresponding MatNo or plant (see Note 629451) and compare the data.
-> If problems occur at this point, there may be a BW technology problem (OLAP processor).
- Now compare the data with R/3 TAC MC.9 and MB5B.
-> If problems occur here, you should also check the PSA contents:
   -> TAC SE16
   -> Table RSTSODS
   -> Selection in the ODSNAME field: "2LIS_03_BX*"
    -> The ODSNAME_TECH field specifies the name of the database table in the PSA - if there are several hits, you can find the corresponding suffix of the source system in the PSA tree.
   -> TAC SE16
   -> PSA database table
   -> Select the data of the corresponding request (you can find this in the InfoCube administration view)
Differences between PSA and InfoCube contents indicate problems in the update (you can use the debugging for the update to check this in more detail).
Differences between PSA and TAC MC.9/MB5B suggest incorrect data extraction. Duplicate or missing stocks indicate technical problems during the data transfer.
I. Verification of data from the 2LIS_03_BF/UM DataSource
- Execute a corresponding query in BW.
- Select the corresponding MatNo or plant in BW using TAC LISTCUBE (see Note 629451) and compare the data.
-> If problems occur at this point, this suggests a BW technology problem (OLAP processor).
- Now compare the data with the R/3 TAC MC.9
- If there is a difference between the stocks, compare the movements, preferably take of note of the month in question and whether it is a receipt or an issue.
- Now compare TAC LISTCUBE in BW with TAC MB5B in R/3, a comparison for exact days should identify incorrect, duplicate or missing documents (select the "Valuated stock" option in TAC MB5B to find records in the BW where the storage location is empty)
- Now check in which format the document number is found in the PSA.
-> In this case also, the reason may be an error in the update or problems in the data extraction.
Consider the logic for determining the transaction keys of receipts/issues (Note 492828).
See these OSS Notes,
SAP Note 745788 Non-cumulative mgmnt in BW: Verifying and correcting data
SAP Note 352344 Process key + reversals in Inventory Management
Thanks
Chandran

Planning using the Non-Cumulative Key figures

HI,
In my reporting requirement for IP, I need to get some actual values from the cube 0IC_C03. The key figues which I required are 0VALSTCKVAL and 0TOTALSTCK, but these 2 are non-culative key figures. When I selected these 2 key figures in my aggregation level, it is throwing an error message as "InfoObject 0VALSTCKVAL(Version A) is not compounded and Aggregation level is inconsitent".
I read in some document that, it is not possible to use non-cumulative keyfigures in ALVL.
I searched in SDN and SERVICE also, but some documents are saying that, in new path level (19) it is possible. Now I using the path level 18 only. In this case how we have to use these non-cumulative keyfigues,, please sugguest me...
Thanks in advance...
Regards
Rajesh

Hi
Non-cummulative keyfigures are not supported fro planning and teh error thrown is correct.Please find the help link which gives what are supported and not supported as part of aggregation levels.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/1c3c7031b70701e10000000a422035/content.htm
Regards, Hyma

Reference point in Non Cumulative

Hello ,
What is reference point which is used inventory?
If i compress with Marker update option enabled and
if want to see the values for the previous month after compression will it give the previous month value or how it will be?
Thanks in advance!
Points will be assigned!
Regards
Ram

Hi,
The noncum would not contain any data, but instead would track additions to inventory (inflow) and consumption from inventory (outflow). We use the same concept on AR for debits and credits to have a balance at a specific date.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
Have a look at the help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Go through these.
Re: Types of non-cumulative keyfigures
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
non-cumulatives KF in reporting
Re: use of non cumulative keyfigure
Re: When do we use Non-Cumulative values?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.html
http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.html
http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.html
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.html
Re: Non-Cumulative keyfigure example
Re: Types of non-cumulative keyfigures
/community [original link is broken]
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.html
/community [original link is broken]?forumID=131&threadID=29557&messageID=273049
/community [original link is broken]?forumID=131&threadID=111914&messageID=1248243
Check this very useful docu.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Reg
Pra

Non cumulative - some differences between MB5B and a clone of the 0IC_C03.

hi experts,
I have a matter with the stock values who are differents between the result of the MB5B transaction (R/3), and a result of a query for the major materials and for a set of plants.
the data flow and delta was built in 2006 with all the supports (how to...etc).
we didn't have any problem until the necessary managment of the volume of the incube (named PQCGB15) : a weekly removing of the oldest periods (we keep 2 years online).
in fact, we have an unmatched results for the plants onto we have done removing. for the recents plants (after deployments) there is no difference.
this removing method was approved by SAP (we opened a post in 2009 #762555) and was built classicaly with the transaction DELETE_FACTS...and a modification of the predicat of the generated report, to obtain a : ... where 0CALDAY < 'DATE' ...
there is no TIME DIMENSION char available, we used first 0POSTING_DATE and replace the characteristics into the abap.
I've just taken in account this subject :
I launched the MF RSDV_VALID_RECREATE : no effect.
I found some notes for exemple 1548125 : I've checked the result between the infocube and the query => no difference found.
there is lot of notes and "literature" for this subject ... but much redundancy.
Before to propose to redoing an "init" from the datasources (with lot of works, no historical), I like to know how did you build your deletions of oldest data for this kind of infocube, and if someone have a method to find what's wrong.
thanks experts,

Could this be because of Non-cumulative Ref.characteristic set as 0CALDAY in the cube?
I tried creating a seperate dimension for posting date and added a ZCALDAY mapping the posting date to it, this works fine as expected shows one posting date per material document number.

How to check in Cube for Non cumulative calculation?

Hi All/surendra (Inventory Specialist)
I am now supporting the Inventory cube. I never worked in inventory. I have read all the documents like
a. How to Inventory
b. Surendra's Inventory with 3parts
c. Non cumulative..
But none of the above docs gave me solution how to go ahead to find or compare with R3 for the first time consultants who is handling Inventory..
Can you pls help me resolve the following issues?
1. May I know how actually the NON CUMULATIVE calculation is done for filelds 0VALSTCKVAL and 0VALSTCKQTY and also other KF's like ISSUE and RECEIPT qty, blocked qty, scrap, stck transit etc as I dont see any mapping done in transformation, if it is not done for Inventory, how it is fetched.??
2.Also I wanted to know what are the fields used cumulated for the above fields as I dont see any transformation mapping done for Key Figure and understood all Inventory docs that the KF are not visible as they are NON CUMULATIVE KF's.
3. How to compare the Inventory stock with R3 Material Stocks as when I compare with transaction MC.9, I see the values are totally different?? how and which transactions or tables supposed to be compared? Also we are not 2lis_03_BX in our Inventory. so I am not sure how they loaded the Inventory. Looks I need to redesign, can you tell steps to check and apply if I have initialize to make sure that my data will come correctly??
Thanks a lot for all you help and efforts in advance.

The source field for quantities is the field CPQUABU, and for values it is the field CPPVLC.
Explanation for the routine :-
IF ( COMM_STRUCTURE-processkey EQ '000' "Other Receipts
OR COMM_STRUCTURE-processkey EQ '001' "Goods Receipt / Vendor
OR COMM_STRUCTURE-processkey EQ '004' "Material Transfer / Receipt
OR COMM_STRUCTURE-processkey EQ '005' "Stock Adjustment InvD +
OR COMM_STRUCTURE-processkey EQ '006' "Stock Adjustment Other +
OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only stock in transit is considered
AND COMM_STRUCTURE-stocktype CA 'FH'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu 0. *
The above part is used for the KF : 0ISSTRANSST - Issue Quantity: Stock in Transit
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '110' ) "Issues from Stock Transfers
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cppvlc 0
see OSS note 630254
AND ( COMM_STRUCTURE-stockcat IS INITIAL OR
( COMM_STRUCTURE-stockcat CA 'EQ' AND
COMM_STRUCTURE-indspecstk CA 'AM' ) ).
result value of the routine
RESULT = COMM_STRUCTURE-cppvlc. *
This part is used for : 0ISSTOTSTCK - Issue Quantity Total Stock
Hope this hepls,
Reg,
Rahul

Validity Table in Non cumulative cube

Hi Friends,
What is the use of validity table in Non cumulative cube?
I have already studied the document 'How to Inventory
Please can any one explain me with example.
Thanks & Regards,
Ramnaresh.P.

Hi,
Validity table is created for non-cumulative key values.
Non cumulative key figures are one which are not possible to cumulate such as head count, inventory amount, these are always in relation to a point in time.
Regards,
Shiva.

Archive Stock Cube with non-cumulative nature

Hi All,
I have been trying to archive the Inventory (Stock) Infocube as we have more than couple of hundread million records in the cube and it is taking long time to execute query.
I know how to acrive the regular cubes and DSOs, but I couldn't find any helpful documentation where I can know how to archive the Infocube with non-cumulative nature or containing Marker update.
Can anyone pleaes post the link of document?
BTW, we are using BI7.0 SP15
Thanks,
Dhaval

Hi,
There are two ways of archiving data from a non-cumulative InfoCube - time slot archiving and archiving with selection characteristics.
Time slot archiving (recommended)
As an archiving method, you must choose for a non-cumulative InfoCube, time slot archiving for the time reference characteristic. When you recreate an archiving object for a non-cumulative InfoCube, this characteristic is also suggested by the system.
Only archive non-cumulative changes up to a specific point in the past. This reduces the volume of data in the InfoCube. The marker (= end non-cumulative) remains unchanged.
In the variants maintenance screen, in the archive administration, under Non-Cumulatives, choose the Movements Only option.
You are only able to archive the marker if you also archive all of the non-cumulative changes. Subsequently, the contents of the non-cumulative InfoCube are archived completely. In the variants maintenance screen, in the archive administration, under Non-Cumulatives, choose the Movements and End Non-cumulative option.
You must archive the non-cumulative changes (for all times) first, and then archive the marker in a separate archiving run, so that the non-cumulative changes and the marker are stored separately in the archive.
The advantage of time slot archiving is that archiving runs can be carried out periodically using a single variant with a relative time restriction. The alternative archiving method described below does not have this advantage.
Archiving with selection characteristics
In some cases, archiving based only on time slots does not have the required effect of reducing the volume of data in the InfoCube. This is the case, for example, if the non-cumulative bearing objects are subject to high fluctuations, meaning that data is constantly being loaded for new objects and old objects are made obsolete. With time slot archiving, the end non-cumulative remains for all objects until all of the data in the InfoCube is finally archived, even if all the non-cumulative changes for an object have been archived already.
In this case, you want to archive and delete completely any objects that are no longer active in the InfoCube. This means archiving the marker as well. For other objects that are still active, you only need to archive the non-cumulative changes from the past, which means the marker is retained.
When you define the archiving properties for a non-cumulative InfoCube, do not therefore choose the time slot archiving method. Instead, select individually the characteristics that are relevant to restricting archiving runs. The time reference characteristic should also be included in this selection whenever possible.
Using this archiving method, for each archiving run, you need to create selection conditions in a variant. In the variant for the archiving run, in addition to the selection conditions, you can also specify for the selected characteristics whether or not non-cumulative changes and marker data is archived. If you choose to archive marker data, be aware that the time selection contains the maximum value for time.
Please refer to the below link to archive the data for Stock Cube:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3f/c219fe9a46194aa66d55254fdab182/frameset.htm
Hope this helps.
Regards
Tanuj

What is cumulative key figure and non cumulative key figure?

Hi Experts,
can anyone clarify me about KEY FIGURES in detail with an example for each topic like
1.Aggregation Tab in Key Figure InfoObject
2.Cummulative
3.Non Cummulative/Cummulative Values
4.Non Cummulative( Inflow & Outflow )
I think it would be better understandable with if explained with example
Thanks,
Venu Gopal.K

HI ,
Cumulative values are those key figures that are cumulated using all characteristics, thus also using time.
Example: sales revenue, weight, etc.
Non-cumulative values are those key figures that are measured in relation to a period in time; that is to say they cannot be meaningfully cumulated over time. Non-cumulative values are summarized over time using so-called exception aggregation.
Example: stock quantities/-values, number of employees, account balances, etc.
refer the below document for a detailed study
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366?quicklink=index&overridelayout=true
Regards,
Sathya

Non cumulative document

Similar Messages

Maybe you are looking for