Non-numeric "S" rsnum's in ioel itab generated by MD_PROJECT_REPORT

Usually, the rsnums in the ioel itab (output by MD_PROJECT_REPORT) are true numeric reservation numbers - they'll be in RESB unless they're internal reservation numbers that SAP MRP generates, rather than reservations created by the user planning process itself.
But what about non-numeric rsnum's in the ioel itab? These can and do exist because in the ioel structure, rsnum is defined as delnr (char 10), rather than as rsnum (numc 10.
So my question is: what the hell are these non-numeric reservation numbers?
Particularly those that start with S like "S38905u201D ????

OK - here's the answer - it's subtle. IF MD_PROJECT_REPORT requires a matnr that's also attached to a sales order (as well as a planned order/prod order/network), the sales order info for the VC delkz will appear in the IOEL itab generated by MD_PROJECT_REPORT.
But such IOEL itab rows are not really relevant to the project report - i.e. you won't see sales orders in MD4C itself when you run it on the project, not the sales order.
So, now I know how to handle these critters ...

Similar Messages

Error while pulling data from an Oracle database. ORA-01858: a non-numeric character was found where a numeric was expected

I'm trying to pull data from an Oracle database using SSIS. When I try to select a few fields from the source table, it returns the following error message:
    [OLE DB Source [47]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
    An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E14 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
    An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
The source columns are a combination of numeric and texts, and I've also tried selecting one of them, which didn't work. I'm using the Oracle client 11.2.0.1, and it works fine with any other data sources I have connected to so far. How can I resolve this
error?

Hi H.James,
According to your description, the issue is a non-numeric character was found where a numeric was expected while pulling data from an Oracle database in SSIS.
Based on the error message, the issue should be you are comparing a number column to a non-number column in a query. Such as the query below (ConfID is a number, Sdate is a date):
where C.ConfID in (select C.Sdate
                   from Conference_C C
                   where C.Sdate < '1-July-12')
Besides, a default behavior for the Oracle OleDb Provider that change the NLS Date Format of the session to 'YYYY-MM-DD HH24:MI:SS can also cause the issue. For more details about this issue, please refer to the following blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2012/01/20/every-bug-is-a-microsoft-bug-until-proven-otherwise.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Non-numeric character error

This is my error:
javax.servlet.ServletException: ORA-01858: a non-numeric character was found where a numeric was expected
This is my code:
ResultSet myRs = myStmt.executeQuery("select count(*) dexCount from cs_dexia where userid = '" + vUserid + "'");
          int vCount = 0;
               while(myRs.next()){
                    vCount = myRs.getInt("dexCount");
          out.println(vCount);
               if(vCount > 0)
               response.sendRedirect("swapform.jsp");
What have I done wrong?

I have changed that and am now getting:
javax.servlet.ServletException: ORA-00904: invalid column name
the query runs in my sql tool no problem, could it be something to do with the alias?

ORA-01858: a non-numeric character was found where a numeric was expected

hi ,
This was the code which shows the sales rep invoice amount and collected amount but while running report thru concurrent program its showing the following error:
ORA-01858: a non-numeric character was found where a numeric was expected
WHERE TO_CHAR ( TO_DATE ( PS.GL_DATE , 'DD/MON/YY' ) , 'MON-YYYY' ) BETWEEN TO_CHAR ( TO_DATE ( : ==> P_todate , 'YYYY/MM/DD' ) , 'MON-YYYY' ) AND TO_CHAR ( TO_DATE ( : P_todate , 'YYYY/MM/DD' ) , 'MON-YYYY' ) AND ps.customer_id = cust.custome
The Actual Code was this
SELECT SUBSTR(SALES.name,1,50) salesrep_name_inv,
--ps.CLASS,
SUM(ABS(ps.acctd_amount_due_remaining)) acctd_amt,
SUM(ABS(ps.amount_due_remaining)) amt_due_remaining_inv,
SUM(ABS(ps.amount_adjusted)) amount_adjusted_inv,
SUM(ABS(ps.amount_applied)) amount_applied_inv,
SUM(ABS(ps.amount_credited)) amount_credited_inv,
SALES.salesrep_id,
NULL "REMARKS"
-- ps.gl_date gl_date_inv,
FROM ra_cust_trx_types ctt,
ra_customers cust,
ar_payment_schedules ps,
ra_salesreps SALES,
ra_site_uses site,
ra_addresses addr,
ra_cust_trx_line_gl_dist gld,
gl_code_combinations c,
ra_customer_trx ct
WHERE TO_CHAR(TO_DATE(PS.GL_DATE,'DD/MON/YY'),'MON-YYYY')
BETWEEN TO_CHAR(TO_DATE(:P_todate,'YYYY/MM/DD'),'MON-YYYY') AND TO_CHAR(TO_DATE(:P_todate,'YYYY/MM/DD'),'MON-YYYY')
AND ps.customer_id = cust.customer_id
AND ps.customer_trx_id = ct.customer_trx_id
AND ps.cust_trx_type_id = ctt.cust_trx_type_id
AND NVL(ct.primary_salesrep_id, -3) = SALES.salesrep_id
AND ps.customer_site_use_id+0 = site.site_use_id(+)
AND site.address_id = addr.address_id(+)
AND TO_CHAR(TO_DATE(PS.GL_DATE_CLOSED,'DD/MON/YY'),'MON-YYYY')
BETWEEN TO_CHAR(TO_DATE(:P_todate,'YYYY/MM/DD'),'MON-YYYY') AND TO_CHAR(TO_DATE(:P_todate,'YYYY/MM/DD'),'MON-YYYY')
--AND ps.gl_date_closed > TO_DATE(:P_todate,'MON-YYYY')
AND ct.customer_trx_id = gld.customer_trx_id
AND gld.account_class = 'REC'
AND gld.latest_rec_flag = 'Y'
AND gld.code_combination_id = c.code_combination_id
AND sales.salesrep_id is not null and sales.name is not null
-- and ps.payment_schedule_id+0 < 9999
-- AND SALES.salesrep_id ='1001'
GROUP BY SALES.name,
--ps.CLASS,
SALES.salesrep_id

So to_date function accepts a string as input and returns a date. When a date is input instead, it is implicity converted to the required type of the function paremeter, which is a string, so that to_date can convert it back to a date again.
If you are lucky with the implicit conversion, you get the same date back, if you are not you might get a different date or an error.
From your query it appears that this conversion from a date, to a string, to a date, and then back to a string using to_char this time, is being done to remove the time or day part of the date. The actual range comparison is being done on strings rather than dates, which is dangerous as strings sort differently than dates.
In this example if I sort by date, Jan 01 comes between Dec 00 and Feb 01 as you would expect.
SQL> select * from t order by d;
D
12-01-2000
01-01-2001
02-01-2001When converted to strings, Feb 01 comes between Dec 00 and Jan 01, which is probably not the desired result
SQL> select * from t order by to_char(d,'DD-MON-YY');
D
12-01-2000
02-01-2001
01-01-2001If you want to remove time and day parts of dates you should use the trunc function
trunc(d) removes the time, trunc(d,'mm') will remove the days to start of month.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/functions201.htm#i79761

Non numeric value in numeric field giving error

Hi All
I am using BAPI for creating sales order. If user is giving non numeric value in Quantity field it is giving error. Because quantity field data type is Double.
Please Help.
Thanks
Raktim

Hi Banerjee,
Create a String/int/long Context variable and point it to UI Input element.Do the validation for correct input value. once the validation is succesful assign that value to RFC BigDecimal variable by Explicit casting.
Hope this might solve your problem .
Thanks
Madhan

At new- command - making non-numeric fields as ******* how to correct this

Hi,
I am using the following code.
Tables : vbap.
DATA: t_vbap TYPE STANDARD TABLE OF vbap,
      x_vbap TYPE vbap.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
SELECT * FROM vbap
    INTO TABLE t_vbap
    WHERE vbeln IN s_vbeln.
LOOP AT t_vbap INTO x_vbap.
    at new vbeln.
      write:'new vbeln'.
      ENDAT.
ENDLOOP.
In debugging mode, the non-numeric fields on x_vbap becomes ****
I want to know whether this can be done using oops.. any methods available for at new
Moderator message: please search for available information/documentation before asking (as you can tell from some of the replies so far)
locked by: Thomas Zloch on Oct 1, 2010 3:25 PM

see documentation:
"If the INTO addition is used in the LOOP statement to assign the content of the current line to a work area wa, its content is changed upon entry into the AT-ENDAT control structure as follows:
The components of the current control key remain unchanged.
All components with a character-type, flat data type to the right of the current control key are set to character "*" in every position.
All the other components to the right of the current control key are set to their initial value.
When the AT-ENDAT control structure is exited, the content of the current table line is assigned to the entire work area wa. "

How to check a field in Message mapping wether it is Non Numeric?

Hi XI Guru's
I am totally new to XI world, Kindly help hopw can I chexk a field while doing message mapping whether the field is non numeric or not.
I dont find any built in function for the same.
If it is using UDF can some body help me in providoing a UDF for this.
Many Thanks
Arun

Hi Arun,
In SAP PI, all the XML contents by default treated as STRINGS.
So if u want to check whether the incoming field is numeric or not... the only way is to write a UDF code for the same.
the UDF will be,
1. At first
import java.util.regex.Matcher;
import java.util.regex.Pattern;
in functions.
2.UDF content:
input: field,container
output:boolean
Code
boolean return_Value;
Pattern p = Pattern.compile("[0-9]*"); // If u are using the decimals please change the regular expression accordingly.
Matcher m = p.matcher(field);
if(m.matches())
retuen_Value = true;
else
return_Value = false;
return return_Value ;
I hope this will solve ur problem....
Babu

Safari "tel:" phone number links stripping non-numeric characters

After a week of owning my iPhone (two weeks after it launched) I made myself a little web interface that contain various iPhone-helpful links. Four of these were AT&T specific telephone links:
*646# - check how many minutes remaining
*729 - pay your bill
etc etc..
(e.g. <a href="tel:*729">click here to pay your bill</a>)
Well, needless to say this was a very convenient feature, however these links no longer function properly. It seems that the iPhone is now stripping any/all non-numeric characters from the link (although I haven't done extensive testing to see exactly which characters .. only with * and $ in particular).
I've even tried HTML entities but they were stripped too.
Now I know apple had a security fix a few patches back, one that fixed a vulnerability involving "tel:" links (CVE-2007-3755), but I haven't found any documentation regarding special characters now being ignored/stripped.
So, my question is does anyone know if there is a workaround for this, or did the patch inadvertently and permanently destroy the ability to send these very helpful text messages via a web interface?
Thanks,
Marc

I'm having a similarly annoying behavior with "tel:" links. I'm doing the same thing -- writing a web page to store some convenient numbers, but for me, it's for teleconference numbers. You dial into a toll-free number, then after a pause, dial in a passcode.
On the iPhone's contact list, you can program in the pauses as the letter "p."
However, in a tel: link, the p's change to 7's. Interesting!
What I've discovered is that, for me (FW 1.1.2), alphabetical characters are translated into their numerical equivalents. So 1-800-COMCAST (a number I've had to dial all too much recently) gets rendered to 18002662278.
This is a difference between Safari 3 and the iPhone version. On Safari 3 on the Mac, both the HTML and a mouseover shows that the tel link contains the letters. On the iPhone, though, clicking the link brings up a dialog box with the letters "translated."
So, interesting -- but now I have a problem. How do I enter a pause into a tel link?

How to check non-numeric value in a field

Hi all,
I have a field 'MVALUE'. HOw can I check if I have a non-numeric value in my field. Let us say if I have a value '<25' in this field. How can I check if the value in this field is non-numeric. The field MVALUE is of CHAR datatype.
Please help. Waiting.........

Might have to add a space in the string...
if not mvalue co ' 0123456789'.
* error
endif.
if you allow decimals and commas...
if not mvalue co ' .,0123456789'.
* error
endif.

Check for non-numeric characters in textbox input

I have a form with several textboxes, each of which can accept numeric input. I want to write a validation/ plsql block that checks for a non-numeric character in the input, so that my user sees a customized error message rather than a database error. Any tips on how I can achieve that? Is there any function like "isalpha" in C, which can directly do the job?
Also, some of these numeric fields should allow commas, since people put commas in larger numbers.
Any help is greatly appreciated.

Arie,
i figured it out. turns out, i had some confusion in my mind. i modified Taneal's solution to use it in my already existing validations of type 'function returning error text' and it works fine.
the problem before was that i was running 2 separate validations on the same field, and probably due to the sequence numbers, i was getting a numeric or value error. now, i've combined all validations into a single validation and it works fine.
and honestly, i'm pretty bad with reg. ex. :D

How can I remove non-numeric characters from a cell?

I have a file an rtf file that I can open in Numbers. It puts each line in a separate cell. Each cell contains non-numeric and numeric characters. I'd like to delete the non-numeric characters so that I can add the numbers together. Is there a way to do this easily in Numbers that doesn't require doing it manually?
Thanks,
David

Ok, David,
This solution will work for vlaues up to 99,000 and if there is a space in front of your amount. There are two parts for clarity but you could wrap them up into one formula if you wanted to.
B2 =FIND(" ",A2,LEN(A2)−9)
C2 =MID(A2,B2,10)
If there is a return before your amount (certain cells in your screenshot got me wondering) then the formula in column B
=FIND("
",A2,1)
It looks funny because it is finding the return.
Let me know if this works for you.
quinn

Replace Non-Numeric Characters with a Numeric Character in a String

Hi Guys,
I need to replace all the non-numeric characters (including embedded blanks & hyphen) in a string to a numeric character '1'.
The trailing blanks should not be replaced.
e.g. "P22233344455566" should be changed to "122233344455566"
& "49-1234567 " should be changed to "4911234567 "
Please help.

Use [replace|http://help.sap.com/abapdocu_70/en/ABAPREPLACE_IN_PATTERN.htm] with a regular expression to translate any non-numeric character (i.e. any character not between 0 and 9) to 1:
REPLACE ALL OCCURENCES OF REGEX '[^0-9]' IN value WITH '1'.
Cheers, harald
p.s.: In older releases [translate|http://help.sap.com/abapdocu_70/en/ABAPTRANSLATE.htm] would also do the trick, but is more lengthy, because one would need to specify each individual character that should be replaced, e.g.:
TRANSLATE value TO UPPER CASE.
TRANSLATE value USING
' 1_1-1a1b1c1d1e1f1g1h1i1j1k1l1m1n1o1p1q1r1s1t1u1v1w1x1y1z1'.

Find a non-numeric character in a string

I have a 3 strings (1) 'AB99CDEFGH0012%' (2) 'ABCDEFGH' (3) 'ABCD11'
how do i find out a that string has non numeric characters
Thanks

SELECT TO_NUMBER(:String) FROM DUAL;
is a quick way to find out :)
A good method would be.....
SELECT 1 FROM DUAL WHERE TRANSLATE(:String, 1234567890, '-') IS NOT NULL;
The statement will filter out ALL numbers, leaving behind any characters, A, B, @, ~, etc...

Sqlldr with error: non-numeric character was found when numeric number

Hi,
I have been struggling with this problem for long, can't get to anywhere.
I am trying to use sqlldr to load a CSV file into table, the table looks like this :
AD_ID NUMBER(38)
CNTCT_ID VARCHAR2(60)
AD_FILE_NAME VARCHAR2(80)
AD_TITLE VARCHAR2(300)
AGCY_APRVL_DATE DATE
CORE_APRVL_DATE DATE
ENTR_CMNT CLOB
IC_APRVL_DATE DATE
PURP_TEXT CLOB
RVW_BRD_APRVL_DATE DATE
ACTIVE_FLAG VARCHAR2(1)
.......................................more fields
The control file looks like this:
LOAD DATA
INFILE "C:\ORACLE_IRTMB\IRPADS\SQL_DATA\ADS_T.CSV"
BADFILE "C:\ORACLE_IRTMB\IRPADS\ADS_T.BAD"
DISCARDFILE "C:\ORACLE_IRTMB\IRPADS\ADS_T.DSC"
truncate INTO TABLE ADS_T
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
     AD_ID INTEGER ,
     CNTCT_ID char ,
     AD_FILE_NAME char ,
     AD_TITLE char nullif (AD_TITLE=BLANKS) ,
     AGCY_APRVL_DATE DATE "MM/DD/YYYY" nullif (AGCY_APRVL_DATE=BLANKS) ,
     CORE_APRVL_DATE DATE "MM/DD/YYYY" ,
     ENTR_CMNT CHAR(7000) nullif (ENTR_CMNT=BLANKS) ,
PURP_TEXT CHAR(7000) nullif (ENTR_CMNT=BLANKS) ,
     RVW_BRD_APRVL_DATE DATE "MM/DD/YYYY" ,
     ACTIVE_FLAG char ,
     ....more fields
The Data file looks like this:
10132,simpsonl,PMSDHHStemplate.pdf,"Depression, Irritability, Mood Swings Sound Familiar?",1/13/2003,11/14/2002,,1/13/2003,"The NIMH is conducting research on premenstrual
10133,jolkovsl,10133ClozapineDHHS ver 0.pdf,Mood Swings? Unpredictable Moods? Are These Moods hard to Treat?,1/28/2003,11/14/2002,,1/28/2003,"The NIMH is conducting a study to test the efficacy of ...
--- and log file looks like this:
Record 5: Rejected - Error on table ADS_T, column RVW_BRD_APRVL_DATE.
second enclosure string not present
Record 7: Rejected - Error on table ADS_T, column RVW_BRD_APRVL_DATE.
second enclosure string not present
Record 9: Rejected - Error on table ADS_T, column RVW_BRD_APRVL_DATE.
second enclosure string not present
Record 2: Rejected - Error on table ADS_T, column AGCY_APRVL_DATE.
ORA-01858: a non-numeric character was found where a numeric was expected
Record 4: Rejected - Error on table ADS_T, column AGCY_APRVL_DATE.
ORA-01858: a non-numeric character was found where a numeric was expected
Record 6: Rejected - Error on table ADS_T, column AGCY_APRVL_DATE.
ORA-01858: a non-numeric character was found where a numeric was expected
IF I use to_date in control file:
LOAD DATA
INFILE "C:\ORACLE_IRTMB\IRPADS\SQL_DATA\ADS_T.CSV"
BADFILE "C:\ORACLE_IRTMB\IRPADS\ADS_T.BAD"
DISCARDFILE "C:\ORACLE_IRTMB\IRPADS\ADS_T.DSC"
truncate INTO TABLE ADS_T
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
     AD_ID INTEGER ,
     CNTCT_ID char ,
     AD_FILE_NAME char ,
     AD_TITLE char nullif (AD_TITLE=BLANKS) ,
     AGCY_APRVL_DATE "to_date(:AGCY_APRVL_DATE,'MM/DD/YYYY')" ,
     CORE_APRVL_DATE DATE "MM/DD/YYYY" ,
     ENTR_CMNT CHAR(7000) nullif (ENTR_CMNT=BLANKS) ,
     IC_APRVL_DATE DATE "MM/DD/YYYY" ,
     PURP_TEXT CHAR(10000) nullif (PURP_TEXT=BLANKS) ,
     RVW_BRD_APRVL_DATE DATE "MM/DD/YYYY" ,
I got extracctly same error message as above...
If I use to_char in control file:
LOAD DATA
INFILE "C:\ORACLE_IRTMB\IRPADS\SQL_DATA\ADS_T.CSV"
BADFILE "C:\ORACLE_IRTMB\IRPADS\ADS_T.BAD"
DISCARDFILE "C:\ORACLE_IRTMB\IRPADS\ADS_T.DSC"
truncate INTO TABLE ADS_T
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
     AD_ID INTEGER ,
     CNTCT_ID char ,
     AD_FILE_NAME char ,
     AD_TITLE char nullif (AD_TITLE=BLANKS) ,
     AGCY_APRVL_DATE "to_char(:AGCY_APRVL_DATE,'MMDDYYYY')" ,
Then it's said a not valid number
Record 2: Rejected - Error on table ADS_T, column AGCY_APRVL_DATE.
ORA-01722: invalid number
Record 4: Rejected - Error on table ADS_T, column AGCY_APRVL_DATE.
ORA-01722: invalid number
Record 6: Rejected - Error on table ADS_T, column AGCY_APRVL_DATE.
ORA-01722: invalid number
Record 8: Rejected - Error on table ADS_T, column AGCY_APRVL_DATE.
ORA-01722: invalid number
someone, please help me out here.
Thanks a lot.
Wei

hello
pls use to_date
If your session is set to default date format of DD-MON-YY, execute the following and you will receive the error message:
SQL> select to_date('20-JAN-2010', 'DD-MM-YYYY') from dual;
ERROR:
ORA-01858: a non-numeric character was found where a numeric was expected
no rows selected
When you are converting a string to a date, you have specified that the date is being passed in DD-MM-YYYY format. But you have passed the date in DD-MON-YYYY format. As the month is expected as a number by oracle, but you have passed a character, oracle is unable to translate the string to a number.
Do one of the following:
SQL> select to_date('20-JAN-2010', 'DD-MON-YYYY') from dual
2 /
TO_DATE
20-JAN-2010
OR
SQL> select to_date('20-10-2010', 'DD-MM-YYYY') from dual
2 /
TO_DATE
20-JAN-2010
or you can use alter sessin set nls_date_format='.....................';
regards

ORA-01858: a non-numeric character found where a digit was expected

Hi,
I'll cut introductions short. We're trying to read data from a flat file (OWB ver.9.2. by the way). After successfully mapping, then generating (with two insignificant warnings), we execute.
Although it says the execution was 'successful', more than a dozen errors return in the form of ORA-01858: a non-numeric character found where a digit was expected
a - Here is the error:
Record 1: Rejected - Error on table "TOPSSTAGE"."FLTR_DCS_IRREG", column "OPERATIVE_FLIGHT_LEG_DATE".
ORA-01858: a non-numeric character was found where a numeric was expected
*it's actually repeated 20 times (Record 1, Record 2, and so on and so forth...) with the same exact error description and details.
b - Here's the part of the OWB-generated script that defines the creation of that field/column:
"OPERATIVE_FLIGHT_LEG_DATE" DATE "mm/dd/yyyy"
c - And here's the data from the flat file (1 of 4 rows)
"2/20/2007","I","0899","N","TPE","MNL","0","0","0","0","0","0","0","0","0","0","0","0","0","0","0","0","0","750","950","746","955"," P3231",,"04","32","32",,,,,,,,"758","946",,"A000","4","D000","5","000","0","0","0","0","D","P","0","0","0","0","0","0","0","0","0","0","0","2/22/2007","000","012","144","2/20/2007","2/20/2007"
*the part where it is in bold is the one that is mapped from the column OPERATIVE_FLIGHT_LEG_DATE to the OPERATIVE_FLIGHT_LEG_DATE column (flat to physical, right?)
it is set as DATE in all settings (mapping, file, etc..)
Any form of help will be greatly appreciated :)
Thanks!
Regards,
_lilim

Hi Bharadwaj,
Yes, I believe you are right. And yes that column is designated a primary key. The weird thing is, we do have null values being entered into the table from the flat file, but these values are far from the "OPERATIVE_FLIGHT_LEG_DATE" column (index-wise). Let me give you an example of our case:
this is a row in the flat file: (sample data only)
"2/20/2007","I","0899","N","TPE","MNL","0","0","0","0","0","0","0","0","0","0","0","0","0","0","0","0","0","750","950","746","955"," P3231",,"04","32","32",,,,,,,,"758","946",,"A000","4","D000","5","000","0","0","0","0","D","P","0","0","0","0","0","0","0","0","0","0","0","2/22/2007","000","012","144","2/20/2007","2/20/2007"
as you can see, I've made the 'null' values bold, as well as the data for OPERATIVE_FLIGHT_LEG_DATE (which shows up, as you can see, at the end of the row).
Now, in the OWB table, the OPERATIVE_FLIGHT_LEG_DATE column is set as a primary key (or foreign, i think, I'll check again) and, thus, is set as one of those columns to first receive data transferred from the flat file.
We see nothing wrong with our mask (which is mm/dd/yyyy by the way) as well as with our data type settings. It has to be with the flat file I guess. We're gonna try putting in dummy values in place of the null ones in the flat file. I'll get back to you asap. Thanks for helping out. :D
Regards,
_lilim

Non-numeric "S" rsnum's in ioel itab generated by MD_PROJECT_REPORT

Similar Messages

Maybe you are looking for