NoSuchMethodError on ejbc.run stub generation under Weblogic 5.1 SP12

It seems like this error has been posted here before but I see no message
body so I'm probably reposting this error.
I am getting the below error where CollectorManagementModule is a JBuilder 7
ejb module which is executing ejbc.run method to generate the CMP entity EJB
stubs.
"CollectorManagementModule.ejbgrpx":
[weblogic.utils.compiler.CodeGenerationException: Exception:
'java.lang.NoSuchMethodError' while trying to invoke: setPrimaryKeyParams at
line 22 - with nested exception:
Help? Any clues?
Tom

Hi Rob, thanks for your reply.
It looks like I replied to myself instead of to the group. In general, yes,
it was the classpath issue you're pointing towards. The service pack jar
files had to be at the beginning of the classpath.
That I kinda knew however I was getting confused by another error I was
getting when I did eventually move the service pack files to the right
place. I didn't know that the \persistense\WebLogic_RDBMS.jar file was not
present in the classpath.
Tom
"Rob Woollen" <[email protected]> wrote in message
news:[email protected]...
Looks like a classpath issue.
Does it work if you invoke ejbc from a shell? If so, can you compare
the classpath settings it's using vs JBuilder.
In particular, I'd guess that some of the service pack jar files are not
being correctly picked up by JBuilder.
-- Rob
Tom Zaranek wrote:
It seems like this error has been posted here before but I see no
message
body so I'm probably reposting this error.
I am getting the below error where CollectorManagementModule is aJBuilder 7
ejb module which is executing ejbc.run method to generate the CMP entityEJB
stubs.
"CollectorManagementModule.ejbgrpx":
[weblogic.utils.compiler.CodeGenerationException: Exception:
'java.lang.NoSuchMethodError' while trying to invoke:setPrimaryKeyParams at> > line 22 - with nested exception:> >> > Help? Any clues?> >> > Tom

Similar Messages

Display Chinese characters on JSP under WebLogic 6.1

We've recently migrated from WebLogic 5.1 to 6.1 and we found that all those
Chinese JSP pages cannot display properly under Solaris, but it works on
some Windows 2000 machines (but everything work under 5.1).
However we haven't made any special changes to any configuration in all
these machines. Why some of them work and some of them doesn't ? Those W2K
machines work are running English version of Windows 2000, but with Chinese
character sets installed.
Our Chinese JSP pages use big5 character encoding instead of unicode.
I've read a number of messages in this newsgroup but I'm still very
confusing on how to fix the problem ...

Hi,
I have the same problem here. I am using weblogic 6.1 on W2k server. I save
prpblem from those static contents in the jsp file, but those data in chinese
from oracle database is working fine. I create a simple jsp file just with a simple
text "hello world" in chinese, I save one as a html and one as a jsp. When I run
this two under weblogic 6.1, the html file display correctly but the jsp is not.
I try "UTF-8", "GB2312" and other charsets but all not working with jsp files.
Please help.... Thank you.
yanglin
"Nohmenn BABAI" <[email protected]> wrote:
>
>
Dear Ricky,
Could you please check the following :
If you are on Sun Solaris systems please check the LC values of your
=
environment as shown in example below.
This is the cause of many troubles due to the fact that the JVM =
considers these parameters to encode.
(example given for Italian display, so I guess for you this will be =
Big5)
On Solaris 7 the right settings are=20
LC_COLLATE=3Dit.ISO8859-15
LC_CTYPE=3Dit.ISO8859-15
LC_MESSAGES=3Dit
LC_MONETARY=3Dit.ISO8859-15
LC_NUMERIC=3Dit.ISO8859-15
LC_TIME=3Dit.ISO8859-15=20
on Solaris 8=20
LC_COLLATE=3Dit_IT.ISO8859-1
LC_CTYPE=3Dit_IT.ISO8859-1
LC_MESSAGES=3Dit
LC_MOLC_COLLATE=3Dit.ISO8859-15
LC_NUMERIC=3Dit_IT.ISO8859-1
LC_TIME=3Dit_IT.ISO8859-1
Also another point to check is=20
In All Weblogic Releases :
You can add the flag -Dfile.encoding=3DUTF8 in the startup line to force
=
default encoding in the JVM
In your Webloigc 5.1 property file
# WEBLOGIC CHARACTERS PROPERTIES
weblogic.httpd.inputCharset./russian/*=3DISO-8859-5
weblogic.httpd.inputCharset./utf/*=3DUTF-8
weblogic.httpd.inputCharset./french/*=3DISO-8859-1
weblogic.httpd.inputCharset./japan*=3DShift_JIS
# FOR ENCODING THE WHOLE SITE IN UTF-8, UNCOMMENT THE FOLLOWING LINE
#weblogic.httpd.inputCharset./*=3DUTF-8
In your weblogic.xml's Weblogic 6.1 and later :
<weblogic-web-app>=20
<charset-params>=20
<input-charset>=20
<resource-path>/japan*</resource-path>=20
<java-charset-name>Shift_JIS</java-charset-name>=20
</input-charset>=20
</charset-params>
=20
<charset-params>=20
<input-charset>=20
<resource-path>/russian*</resource-path>=20
<java-charset-name>ISO-8859-5</java-charset-name>=20
</input-charset>=20
</charset-params>=20
<charset-params>=20
<input-charset>=20
<resource-path>/french*</resource-path>=20
<java-charset-name>ISO-8859-1</java-charset-name>=20
</input-charset>=20
</charset-params>
<charset-params>=20
<input-charset>=20
<resource-path>/UTF-8*</resource-path>=20
<java-charset-name>UTF-8</java-charset-name>=20
</input-charset>=20
</charset-params> =20
</weblogic-web-app>
As you may have noted, the ressouce-path is starting from root, and =
after you insert the directory where you want to define de encoding.
This will influence the JVM when performing a compilation (please clean
=
the temp directories from any compiled jsps before re-starting your =
WLS).
Please reply in the forum is you still face the problem after all these
=
modifications.
Best regards
Nohmenn BABAI
BEA EMEA Technical Support Engineer
"Ricky Wong" <[email protected]> a =E9crit dans le message de news:
=
[email protected]...
We've recently migrated from WebLogic 5.1 to 6.1 and we found thatall =
those
Chinese JSP pages cannot display properly under Solaris, but it works=
on
some Windows 2000 machines (but everything work under 5.1).
=20
However we haven't made any special changes to any configuration in=
all
these machines. Why some of them work and some of them doesn't ? Those=
W2K
machines work are running English version of Windows 2000, but with=
Chinese
character sets installed.
=20
Our Chinese JSP pages use big5 character encoding instead of unicode.
=20
I've read a number of messages in this newsgroup but I'm still very
confusing on how to fix the problem ...
=20
=20<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2716.2200" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT face=3DArial size=3D2>Dear Ricky,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Could you please check the following
=
:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>If you are on Sun Solaris systems =
please check the=20
<STRONG>LC</STRONG> values of your environment as shown in example=20
below.<BR>This is the cause of many troubles due to the fact that the
=
JVM=20
considers these parameters to encode.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>(example given for Italian display,
so =
I guess for=20
you this will be <STRONG>Big5</STRONG>)</FONT></DIV>
<DIV><BR><FONT face=3DArial size=3D2><FONT color=3D#ff0000><STRONG>On
=
Solaris 7 the=20
right settings are</STRONG>=20
<BR></FONT>LC_COLLATE=3Dit.ISO8859-15<BR>LC_CTYPE=3Dit.ISO8859-15<BR>LC_M=
ESSAGES=3Dit<BR>LC_MONETARY=3Dit.ISO8859-15<BR>LC_NUMERIC=3Dit.ISO8859-15=
<BR>LC_TIME=3Dit.ISO8859-15=20
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><FONT color=3D#ff0000><STRONG>on =
Solaris 8</STRONG>=20
<BR></FONT>LC_COLLATE=3Dit_IT.ISO8859-1<BR>LC_CTYPE=3Dit_IT.ISO8859-1<BR>=
LC_MESSAGES=3Dit<BR>LC_MOLC_COLLATE=3Dit.ISO8859-15<BR>LC_NUMERIC=3Dit_IT=
..ISO8859-1<BR>LC_TIME=3Dit_IT.ISO8859-1</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><STRONG>Also another point to check
=
is</STRONG>=20
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>In All Weblogic Releases :<BR>You can
=
add the flag=20
-Dfile.encoding=3DUTF8 in the startup line to force default encoding
in =
the=20
JVM</FONT></DIV>
<DIV><FONT face=3DArial size=3D2><STRONG>In your Webloigc 5.1 property=20
file</STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2># # # # # # # # # # # # # # # # # #
# # =
# # # # # #=20
# # # # # # # #<BR># WEBLOGIC CHARACTERS PROPERTIES<BR>#=20
------------------------------------------------<BR>weblogic.httpd.inputC=
harset./russian/*=3DISO-8859-5<BR>weblogic.httpd.inputCharset./utf/*=3DUT=
F-8<BR>weblogic.httpd.inputCharset./french/*=3DISO-8859-1<BR>weblogic.htt=
pd.inputCharset./japan*=3DShift_JIS<BR>#=20
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #<BR>#
=
FOR=20
ENCODING THE WHOLE SITE IN UTF-8, UNCOMMENT THE FOLLOWING LINE<BR>#=20
------------------------------------------------<BR>#weblogic.httpd.input=
Charset./*=3DUTF-8</FONT></DIV>
<DIV><BR><FONT face=3DArial size=3D2><STRONG>In your weblogic.xml's =
Weblogic 6.1 and=20
later :</STRONG></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><weblogic-web-app> </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><charset-params> =
<BR><input-charset>=20
<BR><resource-path>/japan*</resource-path>=20
<BR><java-charset-name>Shift_JIS</java-charset-name>=20
<BR></input-charset>=20
<BR></charset-params><BR> <BR><charset-params>=20
<BR><input-charset>=20
<BR><resource-path>/russian*</resource-path>=20
<BR><java-charset-name>ISO-8859-5</java-charset-name>=20
<BR></input-charset> <BR></charset-params> </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><charset-params> =
<BR><input-charset>=20
<BR><resource-path>/french*</resource-path>=20
<BR><java-charset-name>ISO-8859-1</java-charset-name>=20
<BR></input-charset> <BR></charset-params></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><charset-params> =
<BR><input-charset>=20
<BR><resource-path>/UTF-8*</resource-path>=20
<BR><java-charset-name>UTF-8</java-charset-name>=20
<BR></input-charset> <BR></charset-params> =
</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></weblogic-web-app></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><EM>As you may have noted, the =
ressouce-path is=20
starting from root, and after you insert the directory where you want
to =
define=20
de encoding.</EM></FONT></DIV>
<DIV><EM><FONT face=3DArial size=3D2></FONT></EM> </DIV>
<DIV><EM><FONT face=3DArial size=3D2></FONT></EM> </DIV>
<DIV><FONT face=3DArial size=3D2>This will influence the JVM when =
performing a=20
compilation (please clean the temp directories from any compiled jsps
=
before=20
re-starting your WLS).</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Please reply in the forum is you still
=
face the=20
problem after all these modifications.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Best regards</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Nohmenn BABAI</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>BEA EMEA Technical Support =
Engineer</FONT></DIV>
<DIV><FONT face=3DArial><BR><FONT size=3D2></FONT></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>"Ricky Wong" <</FONT><A=20
href=3D"mailto:[email protected]"><FONT face=3DArial=20
size=3D2>[email protected]</FONT></A><FONT face=3DArial =
size=3D2>> a =E9crit dans=20
le message de news: </FONT><A =
href=3D"mailto:[email protected]"><FONT=20
face=3DArial size=3D2>[email protected]</FONT></A><FONT =
face=3DArial=20
size=3D2>...</FONT></DIV><FONT face=3DArial size=3D2>> We've recently
=
migrated from=20
WebLogic 5.1 to 6.1 and we found that all those<BR>> Chinese JSP =
pages cannot=20
display properly under Solaris, but it works on<BR>> some Windows
=
2000=20
machines (but everything work under 5.1).<BR>> <BR>> However we
=
haven't=20
made any special changes to any configuration in all<BR>> these =
machines. Why=20
some of them work and some of them doesn't ? Those W2K<BR>> machines
=
work are=20
running English version of Windows 2000, but with Chinese<BR>> =
character sets=20
installed.<BR>> <BR>> Our Chinese JSP pages use big5 character
=
encoding=20
instead of unicode.<BR>> <BR>> I've read a number of messages in
=
this=20
newsgroup but I'm still very<BR>> confusing on how to fix the problem
=
....<BR>> <BR>> </FONT></BODY></HTML>

Insert CLOB into oracle under weblogic

Situation: running my servlet under weblogic, want to insert more than 4000 characters into CLOB of oracle 8.1.7
Problem: cannot be done by using code which is able to do it under tomcat
i use this code in tomcat:
import java.sql.*;
import oracle.sql.CLOB;
import oracle.jdbc.driver.OracleResultSet;
con.setAutoCommit(false);
Statement stmt = con.createStatement();
rs = stmt.executeQuery("SELECT clob_field FROM table where rid=id FOR UPDATE");
rs.next();
CLOB clob = ((OracleResultSet)rs).getCLOB(1);
Writer writer = clob.getCharacterOutputStream();
writer.write(dataString);
writer.close()l
con.commit();
con.setAutoCommit(true);
stmt.close();
after that i know that i can't use API of oracle when i'm using weblogic (e.g. oracle.sql.CLOB)
and i find this code from other user:
import weblogic.jdbc.vendor.oracle.OracleThinClob;
import java.io.*;
import java.sql.*;
PreparedStatement stmt = con.prepareStatement ( "INSERT INTO database VALUES ( ?, EMPTY_CLOB() )" );
stmt.setInt ( 1, 1 );
// inserts a new entry with an empty clob object
stmt.executeUpdate ();
if ( stmt != null )
stmt.close();
// retrieves CLOB-Object
stmt = con.prepareStatement ( "SELECT clob_field FROM database WHERE id=?" );
stmt.setInt ( 1, 1 );
ResultSet rs = stmt.executeQuery ( );
if ( rs.next() )
Clob cl = rs.getClob(1);
Writer clobWriter = ((OracleThinClob)cl).getCharacterOutputStream();
// Open the sample file as a stream for insertion into the Clob column
File testFile = new File ( "file.txt" );
FileReader testReader = new FileReader ( testFile );
// buffer to hold data to being written to the clob.
char[] cBuffer = new char[((OracleThinClob)cl).getBufferSize()];
// Read data from file, write it to clob
int iRead = 0;
while( (iRead= testReader.read(cBuffer)) != -1 )
clobWriter.write( cBuffer, 0, iRead);
testReader.close();
clobWriter.close();
if ( rs != null )
rs.close();
if ( stmt != null )
stmt.close();
// update clob-data in database
stmt = con.prepareStatement ( "UPDATE database SET clob_field = ? WHERE id = ?" );
stmt.setClob ( 1, cl );
stmt.setInt ( 2, 1 );
stmt.executeUpdate();
it throws java.lang.ClassCastException: oracle.sql.CLOB
but i haven't imported or used any API from oracle.........
please help
thanks

hi,
unfortunatly, you can't do this with welbogic6.1 because it 'manage' itself oracle librairies (weblogic.jar),
here is the way i solved the pb for BLOB :
i replaced :
BLOB blob = ((OracleResultSet)rs).getBLOB(1);
by
weblogic.jdbc.rmi.SerialOracleBlob cast1 =(weblogic.jdbc.rmi.SerialOracleBlob)rs.getBlob("myBlob");
weblogic.jdbc.rmi.internal.OracleTBlobImpl cast2 =(weblogic.jdbc.rmi.internal.OracleTBlobImpl)cast1.getTheRealBlob();
BLOB myBlob = (oracle.sql.BLOB)cast2.getTheRealBlob();
it is the same for clob (i suppose ^_^)
hope this helps !
Badr.

Setting up OIM to start as a Windows Service running under Weblogic 10.3.2

Hi,
On recommendation from our Oracle Rep. we have begun migrating our existing OIM installation on Oracle AS to a Weblogic Application Server. As such we are looking for a way to get the OIM application to run as a service in windows - so we dont have to start it manually after a reboot and so that system monitoring can alert us if/when the application crashes for some reason.
I have asked Oracle support - which basically said that no such howto/documentation exists and that "One needs to debug on their own when face any issue." (whatever the h*** that means).
I was thinking that we werent the first customers trying to get the OIM webapplication to start automatically under weblogic and that someone must have figured out a way to accomplish this ?
Any advice on how to do this will be greatly appreciated.
Thank you in advance.
/Jacob

Hi Jacob,
See this post that I answered few time ago. Re: Keeping Remote Manager running - Windows
Our OIM is running as a Windows Service.
REnato

Oracle Portal returns 500 error running under Weblogic 11g server

I've got Oracle Portal set up under Weblogic 11g.
SSO running, talking to OID 11g, also running under the same Weblogic 11g server. Tested SSO, it is working well.
After the install (no errors or issue on install), I go to http://<server>:8090/portal/pls/portal and geta Error 500 - Internal Server Error.
I traced down the problem to OHS - in ohs1.log:
[2009-08-04T10:09:15.0512-05:00] [OHS] [ERROR:32] [OHS-9999] [odl_log.c] [host_id: <server>] [host_addr: 127.0.0.1] [tid: 1320139072] [user: oracle] [ecid: 004S594zs25Fw000jzwkno0002740001NK] [rid: 0] [VirtualHost: main] Request Failed for : /portal/pls/portal, Resp Code : [500]
[2009-08-04T10:09:15.1212-05:00] [OHS] [ERROR:32] [OHS-9999] [core.c] [host_id: <server> [host_addr: 127.0.0.1] [tid: 1330628928] [user: oracle] [ecid: 004S5953tHhFw000jzwkno0002740001NL] [rid: 0] [VirtualHost: main] File does not exist: /opt/oracle/Middleware/asinst_2/config/OHS/ohs1/htdocs/favicon.ico
So the problem is favicon.ico is missing, which I confirmed. Does this mean a bad deployment of an .EAR file? What should I do?

Yes, it seems you are correct....this is from WLS_PORTAL-diagnostic.log
Looks like the real problem is ERROR: Failed to load C shared library in RepositoryGateway after calling RepositoryGatewayJNI.load:
[2009-08-05T08:32:08.333-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBekbL6Fw000jzwkno1AU3uT000001,0] [APP: portal] Portal Servlet Context Listener destroy started
[2009-08-05T08:34:14.191-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] Initializing Portal Servlet Context Listener
[2009-08-05T08:34:14.534-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] Creating Repository Service
[2009-08-05T08:34:14.540-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] In RepositoryService.constructor(<3 args>), PLSQL_CONFIG_FILE = /opt/oracle/Middleware/user_projects/domains/pfrd/servers/WLS_PORTAL/stage/portal/portal/configuration/portal_plsql.conf[[args: serverInfo=WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 , contextRoot=/portal, logMode=error]]
[2009-08-05T08:34:14.578-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] In RepositoryServiceConfig, DAD_CONFIG_FILE = /opt/oracle/Middleware/user_projects/domains/pfrd/servers/WLS_PORTAL/stage/portal/portal/configuration/portal_dads.conf, CACHE_CONFIG_FILE = /opt/oracle/Middleware/user_projects/domains/pfrd/servers/WLS_PORTAL/stage/portal/portal/configuration/portal_cache.conf
[2009-08-05T08:34:14.582-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] In RepositoryServiceConfig, dadRetriever = oracle.webdb.repository.service.DadFileConfigRetriever@26d4835, cacheRetriever = [email protected]7
[2009-08-05T08:34:14.622-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] Calling RepositoryGatewayJNI.load ...
**ERROR STARTS HERE
[2009-08-05T08:34:14.637-05:00] [WLS_PORTAL] [ERROR] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] ERROR: Failed to load C shared library in RepositoryGateway!
[2009-08-05T08:34:14.665-05:00] [WLS_PORTAL] [ERROR] [] [oracle.portal] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId:
<anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] ERROR: Repository Service creation failed. Please check previous log entries for possible cause.
[2009-08-05T08:34:14.911-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal.config.modplsql.mbeans.DadManagerMXBeanImpl] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] **** Inside Reloaded, NOW Register mbean = : /pls/portal
[2009-08-05T08:34:14.915-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portal.config.modplsql.mbeans.DadManagerMXBeanImpl] [tid: [STANDBY].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000IBel63LFw000jzwkno1AUOdM000000,0] [APP: portal] **** Inside RegisterBean, global beanName = : oracle.portal.config:subtype=DADs,name=/pls/portal,type=PortalConfig,Application=portal
[2009-08-05T08:36:16.717-05:00] [WLS_PORTAL] [NOTIFICATION] [] [oracle.portlet.server.wsrp.mbean.WSRPTransientConfigMXBeanImpl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000IBelXi4Fw000jzwkno1ARF2b0004Zm,1:5002] [APP: wsrp-tools] Found WLS AppDeployment MBean com.bea:Name=portalTools#11.1.1.1.0,Type=AppDeployment

How To Run OIM Under Weblogic As A Windows Service?

Hi
does anyone know how to run OIM under Weblogic as a windows service?
Many thanks in advance,
Evanela

Hi
Does anyone know how to run OIM under Weblogic as a windows service?
I have used "Setting Up a WebLogic Server Instance as a Windows Service" (http://download.oracle.com/docs/cd/E12839_01/web.1111/e13708/winservice.htm#START143), but It doesn't work because OIM use the xlStartWLS.cmd file and not startWebLogic.cmd.
thanks!
Edited by: user13082223 on Sep 29, 2010 9:09 AM

Servlet under Weblogic talking to external daemon via RMI

Hi,
We are trying to deploy our servlet-based application to Weblogic 8.1 and have
hit problems with RMI. This application has worked for years under Tomcat.
The servlet attempts to make some RMI calls to an external process which is running
it's own RMI registry. The RMI connection to that external process is being refused
though.
From the Weblogic doc, I've seen information about building RMI stubs using the
Weblogic rmic. But are application needs to support non-Weblogic servlet engines
too so we do not want to have to change our RMI classes around if at all possible.
Does anyone know if it is possible to use standard Java RMI classes inside of
Weblogic to talk to standard RMI classes outside of Weblogic?
Thank you,
Tom

Hi, Tom
Yes, it is possible. I have an application that uses standard Java RMI classes
inside Weblogic. There is a Java Control doing lookup to a remote component.
I had to take care with the permissions in the policy file. If the connection
is being refused, probably you have to review permissions, specially socket permissions.
Bye,
Diana
"Tom H" <[email protected]> wrote:
>
Hi,
We are trying to deploy our servlet-based application to Weblogic 8.1
and have
hit problems with RMI. This application has worked for years under Tomcat.
The servlet attempts to make some RMI calls to an external process which
is running
it's own RMI registry. The RMI connection to that external process is
being refused
though.
From the Weblogic doc, I've seen information about building RMI stubs
using the
Weblogic rmic. But are application needs to support non-Weblogic servlet
engines
too so we do not want to have to change our RMI classes around if at
all possible.
Does anyone know if it is possible to use standard Java RMI classes inside
of
Weblogic to talk to standard RMI classes outside of Weblogic?
Thank you,
Tom

Problems with JSSE under Weblogic 5.1 sp9

I have a java application which uses JSSE to communicate with a WebMethods server
and it works great. However, when I take the same code block and run it under
Weblogic 5.1 sp11, I receive a bad certificate error. After spending a lot of
time reading through various postings, I fixed the problem where Weblogic was
intercepting HTTPsURLConnection, but still have the bad_certificate error.
My setup is as follows:
- Keys stored using keytool in keystores outside of Weblogic
- Service pack 9 is installed (also tested SP10)
- Code runs fine as an isolated java application, but will not run when called
from within weblogic.
- JDK1.3.1_02
- Modified the weblogic.policy file with the following line:"permission java.net.NetPermission
"specifyStreamHandler";"
Source Code:
System.getProperties().put("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
System.out.println("\n\nHandler = "+System.getProperty("java.protocol.handler.pkgs"));
URL server = new URL(null, "https://B2bserver.quadrem.com:4443/invoke/wm.tn/receive",
new com.sun.net.ssl.internal.www.protocol.https.Handler());
System.out.println("Connecting to : "+server.toExternalForm());
char[] password = "weblogic".toCharArray();
SSLContext context = SSLContext.getInstance("SSL");
KeyManagerFactory keyManagerFactory = KeyManagerFactory.getInstance("SunX509");
KeyStore keystore = KeyStore.getInstance("JKS");
keystore.load(new FileInputStream("x:/jpkeystore"), password);
keyManagerFactory.init(keystore, password);
context.init(keyManagerFactory.getKeyManagers(), null, null);
HttpsURLConnection conn = (HttpsURLConnection)server.openConnection();
conn.setDoInput( true );
conn.setDoOutput( true );
conn.setAllowUserInteraction(false);
conn.setUseCaches( false );
conn.setDefaultUseCaches ( false );
conn.setRequestMethod("POST");
conn.setRequestProperty("Content-Type","text/xml");
conn.setRequestProperty("Host", remoteHost);
conn.setRequestProperty("Content-Length", "" + (XML_HEADER.length()+doc.length()));
DataOutputStream out = new DataOutputStream (conn.getOutputStream());
out.writeBytes(XML_HEADER);
out.write(doc.getBytes());
out.flush();
out.close();
All help will be appreciated.
thanks
Mark Johnson
781-993-9212 x375
[email protected]

Mark,
Can you post the complete exceptionand stack trace here ?
Mark Johnson wrote:
I have a java application which uses JSSE to communicate with a WebMethods server
and it works great. However, when I take the same code block and run it under
Weblogic 5.1 sp11, I receive a bad certificate error. After spending a lot of
time reading through various postings, I fixed the problem where Weblogic was
intercepting HTTPsURLConnection, but still have the bad_certificate error.
My setup is as follows:
- Keys stored using keytool in keystores outside of Weblogic
- Service pack 9 is installed (also tested SP10)
- Code runs fine as an isolated java application, but will not run when called
from within weblogic.
- JDK1.3.1_02
- Modified the weblogic.policy file with the following line:"permission java.net.NetPermission
"specifyStreamHandler";"
Source Code:
System.getProperties().put("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
System.out.println("\n\nHandler = "+System.getProperty("java.protocol.handler.pkgs"));
URL server = new URL(null, "https://B2bserver.quadrem.com:4443/invoke/wm.tn/receive",
new com.sun.net.ssl.internal.www.protocol.https.Handler());
System.out.println("Connecting to : "+server.toExternalForm());
char[] password = "weblogic".toCharArray();
SSLContext context = SSLContext.getInstance("SSL");
KeyManagerFactory keyManagerFactory = KeyManagerFactory.getInstance("SunX509");
KeyStore keystore = KeyStore.getInstance("JKS");
keystore.load(new FileInputStream("x:/jpkeystore"), password);
keyManagerFactory.init(keystore, password);
context.init(keyManagerFactory.getKeyManagers(), null, null);
HttpsURLConnection conn = (HttpsURLConnection)server.openConnection();
conn.setDoInput( true );
conn.setDoOutput( true );
conn.setAllowUserInteraction(false);
conn.setUseCaches( false );
conn.setDefaultUseCaches ( false );
conn.setRequestMethod("POST");
conn.setRequestProperty("Content-Type","text/xml");
conn.setRequestProperty("Host", remoteHost);
conn.setRequestProperty("Content-Length", "" + (XML_HEADER.length()+doc.length()));
DataOutputStream out = new DataOutputStream (conn.getOutputStream());
out.writeBytes(XML_HEADER);
out.write(doc.getBytes());
out.flush();
out.close();
All help will be appreciated.
thanks
Mark Johnson
781-993-9212 x375
[email protected]

Double submission problem in J2EE application under Weblogic 8.1 SP2 server

Hi,
We are facing double submission problem in our J2EE application which is running under Weblogic 8.1 SP2 and for the same we already implemented or added the below preventive solutions.
1. We disable the SUBMIT button once the user clicks it.
2. We preventated pressing 'F5' button and clicking 'Refresh' button in the browser.
3. Also we tried to prevent by declaring the idempotent is 'true' under weblogic-ejb-jar.xml as below.
<stateless-bean-methods-are-idempotent>true</stateless-bean-methods-are-idempotent>
So please somebody help us on this issue like how to prevent in some other way.
Regards,
Dinesh.

I have no idea why you would think changing your EJB configuration would have anything to do with preventing double submission at your servlet layer.
One technique I've seen for preventing double submission was first used in the Struts framework several years ago. When a page is "prepared" for display, a token value is created and stored in the session. The page is displayed with a hidden field containing that value. When the page is submitted, the value of the hidden field is compared with the value stored in the session. If they're not equal, the submission is ignored.

Problem with running contract manager under WLS as windows service

I am having a problem running Contract Manager V13 as a windows service. I am using weblogic 10gR3 app server running under Windows 2008 sp2 (32 bit). The system functions just fine if run as an application from the command line. When I use the Oracle install contract manager as admin server (using jrockit) script from Oracle support, the service installs OK, but when starting I get:
+"The contract-mgr-svc-jrockit service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."+
Has anyone run into this problem of windows services not working? If so how did you fix it?
How are others starting contract manager automatically under Weblogic server, without having to do a manual startup?
I am dealing with this disclaimer from Oracle:
Disclaimer: Contract Management has not been officially tested with WebLogic as a Windows service. If experiencing a problem under this configuration that cannot be reproduced, while running as an application, the solution be to run Contract Management as an application.
and have been working with Oracle support for 2-3 weeks now on this problem without any luck.
Is the situation with using Windows services better if I use JBoss application server? Does Oracle officially support Windows service running with JBoss?
Thanks in advance...

What account is the service running under? It may be that the service does not have access to the folders it needs, or does not have the right java CLASSPATH set.
Can you try running the service under the exact same account that successfully runs via the command line?
Cheers,
Daniel

Turning "RunConversionVisibly" on under WebLogic

I'm trying to debug a PDFG problem that is happening on a client site. I would like to turn on the "RunConversionVisibly" flag. I have instructions on how to do this in JBoss (using the jmxconsole app to change this MBean property on the PDFMaker service). I have also managed to perform the same operation using the Java jconsole app under JBoss however I've been unable to utilize jconsole to turn this flag on under WebLogic.
I'm able to connect jconsole to Weblogic however I don't see the adobe.com MBean. Just like under JBos, I can see JMImplementation, java.lang and java.util.logging MBeans. I can also see Security and com.bea MBeans, but no adobe,com MBean.
The client is running LiveCycle 8.2.1 SP3,WebLogic 10.0, Windows 2003 64-bit, MS SQL Server 2005 SP1.
How can I turn on "RunConversionVisibly" under WebLogic?
Rob

This appears to be (yet another) bug in ADE2.0/2.0.1, that (randomly?) effect some people, but not all.
Easiest solution is to install the olver version.
~~~~~~~~~
There are lots of bugs in ADE2.0 (and 2.0.1). Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
Some people have found ADE trying to upgrade automatically.
It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
Probably best to say no if 2.0.x installation asks if you want to migrate your library.

Debugger for Applet under WebLogic Application Server

Hello,
I was wondering if someone knows how can i configure a debugger for an applet running under WebLogic application server version 8.1.
This application server is running its debug mode in port 4000.
Thanks in advance.
Liav.

yeah, but appletviewer is not the solution, I am using jdeveloper 3 , OAS4081. I need to put the client on applet. The documentation says it will work. but the problem remains. I have lareday spent more then 40 hours to find a solution but it won't work.
Jayakumar,If you find a solution can you let me know also. my mail is [email protected]

Error in Jdeveloper while running a project on weblogic server.

Hi ,
I am receiving below error while running a project in Weblogic. I am using Jeveloper 11.1.1.2.0
*** Using port 7101 ***
"C:\Documents and Settings\nlatif\Application Data\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
The system cannot find the path specified.
The JRE was not found in directory D:\OracleJeveloper\Middleware\jdk160_14_R27.6.5-32. (JAVA_HOME)
Please edit your environment and set the JAVA_HOME
variable to point to the root directory of your Java installation.
Press any key to continue . . .
where as I can run the same project in other machine on Jdeveloper with out this error.
Thanks & regards,
Noman

Noman,
have you checked that the folder D:\OracleJeveloper\Middleware\jdk160_14_R27.6.5-32 contains the jre?
Timo

Running .jar file under 1.5 & 1.6

I've created an application under netbeans 6.1 using jdk 1.6.0_06. The application runs on any PC that contains version 1.6, but will not execute for 1.5. I did not know at the time all other workstations contain jdk 1.5. An error for NoClassDefFoundError GroupLayout$Group appears running under 1.5. I realize building this app under 1.6 causes this error, as it uses some of the functionality of 1.6. Is there anyway to run this app under 1.5 without reinventing the wheel, since my Lan administrators will not approve the upgrade to 1.6 ? I've read the site http://forum.java.sun.com/thread.jspa?forumID=31&threadID=5259325, about changing and adding the Java Platform to a different version, but unable to add JDK 1.5

ChuckBing wrote:
abillconsl wrote:
I'd be interested to know why it's a Netbeans thing - isn't vers 1.6x, well, 1.6x - no matter what the build forum?This missing lib
NoClassDefFoundError GroupLayout$Group is because the lib isn't included in 1.5 (it was added to 1.6) and the FAQs at the NB site explain what to do.Um ... didn't I mention that myself in my first post? I still don't get what NetBeans has to do with it.

Problem with running a program under Labview 8.6

Hello,
I am writing you this to ask for your technical support to fix the problem I am facing at our Lab at University of California, Irvine.
Ms. Vanessa Trujillo has kindly come to our lab a couple of times and tried different things to resolve the issue, but unfortunately the issue is not resolved yet. Here is a summary of the problem:
We used to use Labview 6.1 for our fatigue testing and data acquisition.
Our
program worked just fine under the 6.1 version We recently upgraded our software to Labview 8.6. We have also purchased a new computer that has higher capacity than what your website requires for Labview 8.6. The new computer has Windows Vista We transferred our old program/subprograms from the old computer under Labview
6.1 to the new computer with labview 8.6. However our program that worked fine with the 6.1 version is not working with the updated version (ver 8.6).
There
are 6 errors in the error list. It appears there are six files of my program missing under the new version, even though we transferred all files.
The software searches for those files but can't find them.
        For example one the box pops up indicates:
        loading:
                    <vlib>:\Daq\lvdaq.dll
        searching:
                    C:\Program Files\National Instrument\LabVIEW 8.6\instr.lib\Agilent34401\public\utility
        I get several message like this. I have to cancel/ignore them all to be able to open the program.
When we go to VI's under Measurement I/O there is nothing (empty).
We use a PCI-MIO-16XE-50 for our data acquisition During Labview installation on the new computer, I was asked if I wanted to install the device drivers. I had two options, "Now" or "Later", I picked Now but I didn't have the DVD's/CD's for the device drivers. Therefore I had to select later to complete my software installation Later after Labview 8.6 installation, we installed the device drivers (traditional Ni DAQ and Ni DAQmx) from the two old CD's we had in our lab from a couple of years ago (the CD's were Ni DAQ 7). after installation, the PCI board on the computer was recognized by the device driver. However we still could not run our program under the new version of Labview (same situation and the same messages) I called 1-866-275-6964 on 9/2/08 and talked to Grant (service number:
1228841). He recommended that I download and install the updated version of device drivers.
Since I didn't have the DVD/CD for updated device drivers, I contacted Vanessa Trujillo. She gave me the DVD for the updated Ni DAQ (Traditional and mx).
But
when I tried to install the updated device drivers I got a message something like "some unsupported filed have been detected,..." so the updated device
drivers were not installed. It should be noted that up to here we still had the Ni DAQ (traditional and mx) installed on the computer from our old CD's (Ni DAQ 7).
Vanessa and I talked to Tom at the technical support department. He recommended that we download and install the Beta xx version for Ni DAQ since we were using Windows Vista. Mike put the Beta software on the Ni website/outgoing so I could download and install it. He asked me to uninstall the traditional Ni DAQ that we had on our computer from the older CD's. He
asked me not to un-install the Ni DAQmx (that we had installed from the old
CD). I was able to download the Beta software, however I could not install it since I got a similar message that some unsupported files were detected.
Right now we don't have any version of traditional Ni DAQ installed on the
computer but the NI DAQmx (from old Ni DAQ 7) is still installed on the computer. Vanessa let me borrow her new Ni DAQ DVD but as I explained I am not able to install the device drivers.
Vanessa - Did I miss anything?
Please advise. My cell number is 619-778-2033. I will be at our lab at UC,
Irvine at 2:00pm (CA/Pacific time). Please call if you have any questions.
Thank you

To me, it looks like you are missing some of the drivers and subVI's used in your program.
Whatever device you are using to measure fatigue or any other device probably came with a driver.
You need all of these drivers installed on this new computer.
Also, any subVI's and libraries you use in the program must also be installed on the new computer.
Whenever you get a message that says you are missing some component (the ones that you said you press 'ignore'),
see if you can find that library or subVI on the older computer. If so, save it to something so you can transfer them to the new computer.
Cory K

NoSuchMethodError on ejbc.run stub generation under Weblogic 5.1 SP12

Similar Messages

Maybe you are looking for