Not able to boot to Windows XP all the time

My BIOS version is AMIBIOS Version 3.31a. After installing a new hard drive with a K8T Neo-FSR motherboard am I receiving the following error.
PXE-M0F: No boot filename received
It keeps on doing the same error over and over again.
The BIOS does see the hard drive.
The boot order in the Realtek RTL8110S/8169S Gigabit Boot Agent configuration menu
is Always boot network first, then local devices.
When I change the boot order to ROM Disable I receive the following error.
Boot Failure
Reboot and select proper boot device
or insert boot media in selected boot device
Press any key when ready
After changing the boot order to boot the devices ordered in BIOS setup it starts perfectly into Windows XP. Once I shut down and restart the computer the following message comes up.
Boot Failure
Reboot and select proper boot device
or insert boot media in selected boot device
Press any key when ready
How can I get it to stop?

Do you ever boot from LAN? If not disable boot from LAN. When you change boot order do you simply set it to boot from drive with OS on it and restart or do you 'save changes and exit? Is your new HDD S-ATA 1.5 or 3.0? If 3.0 did you jumper to 1.5?

Similar Messages

Can't see shared windows printer all the time

The printer was set up when I was able to see the windows workgroup with finder, and then I went to setting to set up the printer (need to choose windows printer). It was working when I tested it. Later when I want to print, it says connection refused. Then I found the windows workgroup no longer appeared under finder. The Windows PC was on and the printer was on and yet I got connection refused. What gives?

Hi mkfromon,
If you are having issues accessing a network printer, you may find the following article helpful:
OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11070
Regards,
- Brenden

App tabs not saved BEFORE Firefox crashes - which is ALL THE TIME

if Firefox is going to continue to crash, which seems beyond your control at this point, and the software does not automatically save the pinned tabs BEFORE an inevitable crash, shouldn't you create some kind of a "Save Preferences" button so we don't lose everything every time the browser takes a dump?)

Right, like I'm trying to say, THERE IS NO SAFARI MENU bar. Example: I have multiple applications open, I click on a Photoshop window, the correct menu or title bar or whatever changes. Every other application window I click on brings up the correct "whatever" bar. If I click on the desktop, the "Finder Bar" shows up.
Everythiing else, BUT SAFARI, works the same way since OS X came out. This is ridiculous.
I'm getting the vibe that Apple is trying to get rid of the finder.... this is the way wrong direction.

ITunes Shuts Down Over Microsoft Windows Error ALL the time - Help

I've never had this problem until ITunes 7 (and I've had an Ipod for 4 years), but now 1 out of 3 times that I open ITunes, it crashes and shuts down after I get a Microsoft error message - some unexplained problem which I've let Microsoft know about through an error report several times, but they haven't done anything I'm aware of. Sometimes this happens when I've been using Itunes for a while as well - very frustrating. Had anyone else experienced this, and is there a remedy? Thanks!
Windows XP PC - Fujistsu Laptop Brand New Windows XP
Windows XP PC - Fujistsu Laptop Brand New Windows XP

Ipod Lover,
Your problem strikes me as similar to one posted in another thread which received this diagnosis by the inimitable b noir.
Try those suggestions and post back to let us know if it brings you anything in the way of satisfaction.

When I attempt to copy a bank statement, I can copy it to a folder, the second time I attempt to copy another month it will not copy, this is not unique to one bank it happens all the time. , thanks for your time.

''dupe of https://support.mozilla.org/en-US/questions/916648''
.windows 7

Turning off hardware acceleration fixed it. Thanks for the help. :D

On old laptop, I got a toolbar type of crawl with RSS feeds. Now have 18.0.2 and do not get to see what is latest all the time. How do I get RSS crawl?

Is the crawl bar available or not for RSS? This was a favorite feature of mine for keeping up on news without having to open a site or click on anything but the headline which interested me. If crawl is no longer available, is there a page to get similar things to old RSS feeds? Can it be done through FaceBook?

See this for an explanation of '''URI'''. <br />
http://en.wikipedia.org/wiki/URI

Some hoe i have on my screen window that all the time tell me what I'm doing and im dont succeed to turn this option off?

how can i turn of this option that showne in the screenshot

Be aware that current TenFourFox versions no longer support plugins like Flash
* http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
Flash Player 10.1 Release Notes: (latest version for Mac G3 PPC)
* http://kb2.adobe.com/cps/838/cpsid_83808.html
See (Released 11/04/2010) Flash Player 10.1.102.64 and 9.0.289.0 (126 MB)
* http://kb2.adobe.com/cps/142/tn_14266.html Archived Flash Player versions

How do you disable Parental Controls without admin password? When I go on Safari, this window pops ALL THE TIME saying you need to add some certain websites. I really want to get on Facebook and YouTube. I don't even remember the password.

I need to get on Facebook and YouTube so I can make my videos and post them and post stuff on Facebook to my friends. Please help me? Plus it's an iMac model: A1208. I really need help.

If I understand correctly, Sonic Kaboom.swf needs to be edited in a separate Flash authoring program and then reinserted into your HTML document.
As Murray said, Flash is dead. Nobody uses it anymore. We use HTML5, CSS3 and JavaScript animations which have universal support from Smartphones, Tablets and other web devices that can't support Flash. Look at Edge Animate.
HTML animation | Download free Adobe Edge Animate CC trial
Nancy O.

TS1398 my iPod 2 gen says that I'm in range for wifi, but does not allow me to use it after all the times i have tried. it works on every other device, but mine. Need help please?

HELP

Have you:
- Tried another network?
- Does the iPod see the network?
- Tried a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Powered off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Setting
- iOS: Troubleshooting Wi-Fi networks and connections
- Changing the encryption on the router?

HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

Thanks Roger W1,
Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
Thanks,
Jay

I have to activate all the time

Hello there,
many times I try to play DRM-protected music Itunes wants me to activate although I already activated.
Fortunately the counter of activated computers does not increase if I enter my data. Neither do I have any problems when I entered the data and for some time (probably until restarting the program) I do not have to activate again even if I play DRM-protected music.
So the problem is not that big, but entering my data all the time begins to annoy me. Can you help me?
Thanks!

Oh, that horrible authorization loop strikes again.
Here are some things to try
1) All three steps from this article, which gets rid of the folders & files that hold the PC authorization and rebuilds them.
http://docs.info.apple.com/article.html?artnum=306424
2) Get a free single of the week and play a few seconds of it. Sometimes that will kick up an agreement to new terms of service and fix the DRM stuff.
3) Drag the song from Windows Explorer back into the itunes library. See if the new entry will play. Then remove the old entry but don't send it to the recycle bin.
Good luck!

How can I stay on the Support communities with out signing in all the time?

How can I stay on the Support Communities without signing in all the time?
Thanks

You will be signed out as soon as you quit the browser, or within around 5-10 minutes of closing the window. The only way to stay signed in is to keep a window open all the time, either working in other tabs, or minimizing it and then going on with something else in a new window. It's a pest, but that's the way it is.

I have a mac osx and want to use a magic jack without the computer on all the time.

I am trying to use a magic jack plus without plugging into my mac. (It will work plugged directly into the computer but I bought it so I would not have to keep my mac on all the time to use the phone).
What do I need to get a separate modem. I am on air port express (an old one)

It appears that Magic Jack installs software on your system that it needs to run. Look at some of the threads in "More Like This" on the righthand side of this page or look here:
http://www.voipreview.org/review/magicjack

Not able to successfully subscribe to and see the TargetApplicationChosen event fire from Windows Phone 8.1

Matt,
Thanks for the reply.
In my current experience, I am not able to successfully subscribe to and see the TargetApplicationChosen event fire from Windows Phone 8.1.
In Windows Store 8.1 (Tablet), it works fine.
Questions
Is this event expected to fire in Window Phone 8.1 (Universal Apps, Not Silverlight 8.1) ?
Does this event depend on the target application to supply AppName?
Thanks for your help. Much appreciated.
Example Code Block
//From Page Contstructor or OnNavigatedTo Handler
_dataTransferManager = DataTransferManager.GetForCurrentView();
_dataTransferManager.TargetApplicationChosen += DataTransferManagerOnTargetApplicationChosen;
private void DataTransferManagerOnTargetApplicationChosen(DataTransferManager sender, TargetApplicationChosenEventArgs args)
//fires in tablet but not phone

This is not an answer, Mr. Wong. The link you referenced refers to the DataTransferManager class being supported only in Native apps, which includes Windows Phone 8.1 RT apps. All aspects of the DataTransferManager work except for the TargetApplicationChosen
event under a WP8.1 universal app. This event does NOT fire in the Windows Phone 8.1 RT API implementation of DataTransferManager.
You need to reopen this thread and address the issue, please. The lack of support for this event is problematic for some phone scenarios, most notably supporting NFC Tap and Share.
Mark Jones, Owner MJ App Factory

Hyper V feature in Win 8.1 after getting installed , system is not able to boot up

I am using Windows 8.1 professional x64 os in my Hp pavilion G6 laptop which has virtualisation technology enabled in the bios , but after enabling hyper v feature in the windows system is not able to boot up and circles around for a long time. I need
hyper v on my laptop , kindly help me out for the same.

Hi,
Please try to boot into WinRE and run the Startup Repair option.
Generally speaking, when you add feature like Hyper-V, system would take a long time to get this feature configured. if your computer still stay updates configuration steps, you can use Windows 8.1 installation image to repair system. In system repair mode,
you can access into Command Prompt mode, and check CBS.log under C:\Windows\logs\CBS.
This log file would record Windows installation process, we may find the problem of Hyper-V installation.
Kate Li
TechNet Community Support

Not able to boot to Windows XP all the time

Similar Messages

Maybe you are looking for