Not able to display error message in PR creation.
HI Experts,
In PR creation process i am not able to display error message.
BADI: ME_PROCESS_REQ_CUST
method : PROCESS_ACCOUNT, PROCESS_ITEM
I have used Include mm_messages_mac for handling error .
MESSAGE e112(XXX) WITH XX-XX. this is my error message.
even tried this also mmpur_message 'W' 'ZMM_PUR' '001' '' '' '' ''.
Please provide solution for this.
Regards,
Jayant
Hi,
In devepoment system im able to display the message but not in quality,code is 100% algined with quality.
In quality system error message is being executed but not displayed,i mean control is comming out after the error message.
i am using
message EXXX(XXX).
regards,
Jayant.
Similar Messages
-
Not able to Display Information message fully
Hi Gurus,
Here I hav some problem in displaying a information message in the output.
My requirment is to display a information message--->
MESSAGE i008(zmsgkc1) with 'Chapter Id is not updated Please log a complain with IBM Helpdesk with ChapterID no'.
fully in the output of program
BUT
while we r executing it it is showing information message in the o/p like with below fragmented text
'Chapter Id is not updated Please log a complain wi'
As we know maximum character limit for displayin info messge is 72 but if it is more than 72 like my case how should i approach to solve the problem.
Is there any other way to display my full message what i mentioned above ???
pls hlp
Regards
Saifur RahamanHi Saifur Rahaman.
Try the following code and Function Module.
CONSTANTS: c_msg1 TYPE string VALUE 'Chapter Id is not updated',
c_msg2 TYPE string VALUE 'Please log a complaint with IBM',
c_msg3 TYPE string VALUE 'Helpdesk with ChapterID no'.
CALL FUNCTION 'C14Z_MESSAGES_SHOW_AS_POPUP'
EXPORTING
I_MSGID = '0'
I_MSGTY = 'I'
I_MSGNO = '000'
I_MSGV1 = c_msg1
I_MSGV2 = c_msg2
I_MSGV3 = c_msg3.
You'll get a pop up with the information message. If you click on the information message you can see the entire message.
Hope that this helps you with your requirement. Reward accordingly.
Thanks and Regards,
Maddineni Bharath. -
Display error message from SLG1 on shopping cart screen
I have implemented a 'BBP_CATALOG_TRANSFER' badi. I am adding all the custom error messages in ET_SC_MESSAGES export parameter of this badi. As a result of this, all the custom error messages added in the above parameter, gets logged in the application log SLG1 automatically and I can see those custom messages in SLG1. Now how to display this message from SLG1 on the shopping cart screen on the top where you normally see standard error messages in red.
Can anyone please help me on this?
Thanks,
KrupaHi
Which SRM version are you using ?
I have not tried this... but I think this is not possible to display error messages
using BBP_CATALOG_TRANSFER BADI.
<u>Try to code your logic in using BBP_DOC_CHECK_BADI for filter type - BUS2121 (shopping cart). You need to add your custom message in ET_MESSAGES [] table.</u>
<b>For sample coding, refer to the link below -></b>
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/bbp_doc_check_badi-CheckPurchasingDocument&
<b>Hope this will definitely help.</b>
Do let me know.
Regards
- Atul -
OAF page is not able to display the custom error messages
Hi,
I have extended a seeded CO and trying to throw few custom error messages.
It was working fine, but suddenly it is not able to display the error messages(but checked that the error messages are still present in application) and saying "Message not found. Application: PER, Message Name: ...."
Is there any profile option which enables the custom messages?
Thanks,
RanitaHi,
There is no profile to enable the Custom error Messages, u will use the diagnostistics for showing the messages in the custom page
use the following syntax for writing a msg in Jdeveloper
pageContext.writeDiagnostics(strClassName, "Initializing the vo....", OAWebBeanConstants.STATEMENT);
and enable the following profile option to yes
Fnd:Diagnostics
Regards
Chanu -
Not able to display flat file's error line in output
The below Source Code is BDC for XD01 (update Customer Master Record) in CALL TRANSACTION method. This program is written in call transaction method cause as per users requirement, user wants error log to be printed as soon as the BDC process finished in the background mode.
When you execute this below program it will show a selection screen from where you can select your flat file from system.
After executing this code show output like below as soon as it finished processing the FLAT file.
1. Customer Update Summary
2. Successful record with customer number and name.
3. Error Records with 'record number' and 'reason for error'
(For testing you just have to copy-paste-save-active the source code)
And I have encountered an issue over here in 3rd section-Record Number of Error Records.
The Record Number is for display the line number of that flat file line which in which error has occurred.
The Record Number Entries showing only 0 instead of showing line number of error entry .
I have used Function Module FORMAT_MESSAGE to capture the errors. But not able to display line number of that flat file which is containing error.
So please suggest me what changes I should make in below source code to get proper output.
Flat file for your R&D
1000 1000 10 10 0001 Company Chobey & Group1N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
1000 1000 10 10 0001 Company Chobey & Group2N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
1000 1000 10 10 0001 Company Chobey & Group3N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS . A 10 1
1000 1000 10 10 0001 Company Chobey & Group4N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A .. 1
1000 1000 10 10 0001 Company Chobey & Group5N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
And Source Code
*& Report Z_TEST_SAI *
REPORT Z_TEST_SAI no standard page heading line-size 255.
TYPES: BEGIN OF t_cust,
bukrs like rf02d-bukrs,
vkorg like rf02d-vkorg,
vtweg like rf02d-vtweg,
spart like rf02d-spart,
ktokd like rf02d-ktokd,
anred like kna1-anred,
name1 like kna1-name1,
sortl like kna1-sortl,
name2 like kna1-name2,
name3 like kna1-name3,
name4 like kna1-name4,
stras like kna1-stras,
pfach like kna1-pfach,
ort01 like kna1-ort01,
pstlz like kna1-pstlz,
ort02 like kna1-ort02,
pfort like kna1-pfort,
pstl2 like kna1-pstl2,
land1 like kna1-land1,
regio like kna1-regio,
telx1 like kna1-telx1,
telf1 like kna1-telf1,
telfx like kna1-telfx,
telf2 like kna1-telf2,
teltx like kna1-teltx,
stceg like kna1-stceg,
cityc like kna1-cityc,
lzone like kna1-lzone,
niels like kna1-niels,
kukla like kna1-kukla,
akont like knb1-akont,
fdgrv like knb1-fdgrv,
vzskz like knb1-vzskz,
zterm like knb1-zterm,
vkbur like knvv-vkbur,
versg like knvv-versg,
vsbed like knvv-vsbed,
ktgrd like knvv-ktgrd,
taxkd like knvi-taxkd,
END OF t_cust.
TYPES: BEGIN OF t_sucrec,
cnum TYPE kna1-kunnr, "Customer Number
cnam TYPE kna1-name1, "Customer Name
END OF t_sucrec.
TYPES: BEGIN OF t_errrec,
* lineno TYPE i, "Line Number
lineno TYPE string,
message TYPE string, "Error Message
END OF t_errrec.
DATA: v_file TYPE string, "Variable for storing flat file
it_cust TYPE STANDARD TABLE OF t_cust, "Internal table of Customer
wa_cust LIKE LINE OF it_cust, "Workarea of Internal table it_cust
it_sucrec TYPE STANDARD TABLE OF t_sucrec, "Internal table of Success records
wa_sucrec LIKE LINE OF it_sucrec, "Workarea of Internal table it_sucrec
it_errrec TYPE STANDARD TABLE OF t_errrec,
wa_errrec LIKE LINE OF it_errrec,
it_bdctab LIKE bdcdata OCCURS 0 WITH HEADER LINE, "Internal table structure of BDCDATA
it_messagetab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE, "Tracing Error Messages
v_date LIKE sy-datum, "Controlling of session date
v_index LIKE sy-index, "Index Number
v_totrec TYPE i, "Total Records
v_errrec TYPE i, "Error Records
v_sucrec TYPE i, "Success Records
v_sesschk TYPE c. "Session maintenance
*& SELECTION-SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001 NO INTERVALS.
PARAMETERS: p_file TYPE rlgrap-filename. "rlgrap-filename is a predefined structure
SELECTION-SCREEN: END OF BLOCK blk1.
SELECTION-SCREEN: BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002 NO INTERVALS.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N',
p_update LIKE ctu_params-updmode DEFAULT 'A'.
SELECTION-SCREEN END OF BLOCK blk2.
*& INITIALIZATION
INITIALIZATION.
v_date = sy-datum - 1.
*& AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
FIELD_NAME = ' '
IMPORTING
file_name = p_file.
*& START-OF-SELECTION
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = it_cust
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc = 0.
*MESSAGE ID sy-msgid
*TYPE sy-msgty
*NUMBER sy-msgno
*WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& END-OF-SELECTION
END-OF-SELECTION.
v_index = sy-index.
LOOP AT it_cust INTO wa_cust.
perform bdc_dynpro using 'SAPMF02D' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KTOKD'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02D-BUKRS'
wa_cust-bukrs.
perform bdc_field using 'RF02D-VKORG'
wa_cust-vkorg.
perform bdc_field using 'RF02D-VTWEG'
wa_cust-vtweg.
perform bdc_field using 'RF02D-SPART'
wa_cust-spart.
perform bdc_field using 'RF02D-KTOKD'
wa_cust-ktokd.
perform bdc_dynpro using 'SAPMF02D' '0110'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-TELTX'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-ANRED'
wa_cust-anred.
perform bdc_field using 'KNA1-NAME1'
wa_cust-name1.
perform bdc_field using 'KNA1-SORTL'
wa_cust-sortl.
perform bdc_field using 'KNA1-NAME2'
wa_cust-name2.
perform bdc_field using 'KNA1-NAME3'
wa_cust-name3.
perform bdc_field using 'KNA1-NAME4'
wa_cust-name4.
perform bdc_field using 'KNA1-STRAS'
wa_cust-stras.
perform bdc_field using 'KNA1-PFACH'
wa_cust-pfach.
perform bdc_field using 'KNA1-ORT01'
wa_cust-ort01.
perform bdc_field using 'KNA1-PSTLZ'
wa_cust-pstlz.
perform bdc_field using 'KNA1-ORT02'
wa_cust-ort02.
perform bdc_field using 'KNA1-PFORT'
wa_cust-pfort.
perform bdc_field using 'KNA1-PSTL2'
wa_cust-pstl2.
perform bdc_field using 'KNA1-LAND1'
wa_cust-land1.
perform bdc_field using 'KNA1-REGIO'
wa_cust-regio.
perform bdc_field using 'KNA1-SPRAS'
'EN'.
perform bdc_field using 'KNA1-TELX1'
wa_cust-telx1.
perform bdc_field using 'KNA1-TELF1'
wa_cust-telf1.
perform bdc_field using 'KNA1-TELFX'
wa_cust-telfx.
perform bdc_field using 'KNA1-TELF2'
wa_cust-telf2.
perform bdc_field using 'KNA1-TELTX'
wa_cust-teltx.
perform bdc_dynpro using 'SAPMF02D' '0120'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-CITYC'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-STCEG'
wa_cust-stceg.
perform bdc_field using 'KNA1-CITYC'
wa_cust-cityc.
perform bdc_field using 'KNA1-LZONE'
wa_cust-lzone.
perform bdc_dynpro using 'SAPMF02D' '0125'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-KUKLA'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-NIELS'
wa_cust-niels.
perform bdc_field using 'KNA1-KUKLA'
wa_cust-kukla.
perform bdc_dynpro using 'SAPMF02D' '0130'.
perform bdc_field using 'BDC_CURSOR'
'KNBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0340'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0360'.
perform bdc_field using 'BDC_CURSOR'
'KNVK-NAMEV(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0210'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-VZSKZ'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNB1-AKONT'
wa_cust-akont.
perform bdc_field using 'KNB1-FDGRV'
wa_cust-fdgrv.
perform bdc_field using 'KNB1-VZSKZ'
wa_cust-vzskz.
perform bdc_dynpro using 'SAPMF02D' '0215'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNB1-ZTERM'
wa_cust-zterm.
perform bdc_dynpro using 'SAPMF02D' '0220'.
perform bdc_field using 'BDC_CURSOR'
'KNB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0230'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-VRSNR'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0610'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KUNNR'.
perform bdc_dynpro using 'SAPMF02D' '0310'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-VERSG'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-AWAHR'
'100'.
perform bdc_field using 'KNVV-VKBUR'
wa_cust-vkbur.
perform bdc_field using 'KNVV-WAERS'
'INR'.
perform bdc_field using 'KNVV-KALKS'
'1'.
perform bdc_field using 'KNVV-VERSG'
wa_cust-versg.
perform bdc_dynpro using 'SAPMF02D' '0315'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-VSBED'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-LPRIO'
perform bdc_field using 'KNVV-KZAZU'
'X'.
perform bdc_field using 'KNVV-VSBED'
wa_cust-vsbed.
perform bdc_field using 'KNVV-ANTLF'
'9'.
perform bdc_dynpro using 'SAPMF02D' '0320'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-KTGRD'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-BOKRE'
'X'.
perform bdc_field using 'KNVV-KTGRD'
wa_cust-ktgrd.
perform bdc_dynpro using 'SAPMF02D' '1350'.
perform bdc_field using 'BDC_CURSOR'
'KNVI-TAXKD(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVI-TAXKD(01)'
wa_cust-taxkd.
perform bdc_dynpro using 'SAPMF02D' '0324'.
perform bdc_field using 'BDC_CURSOR'
'KNVP-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
CALL TRANSACTION 'XD01' USING it_bdctab
MODE p_mode
UPDATE p_update
MESSAGES INTO it_messagetab.
IF sy-subrc = 0.
*& reading success records to corresponding internal table
READ TABLE it_messagetab WITH KEY msgtyp = 'S'.
IF sy-subrc = 0.
wa_sucrec-cnum = it_messagetab-msgv1.
wa_sucrec-cnam = wa_cust-name1.
APPEND wa_sucrec TO it_sucrec.
CLEAR wa_sucrec.
ENDIF.
ELSE.
*& reading error records to corresponding internal table
READ TABLE it_messagetab WITH KEY msgtyp = 'E'.
IF sy-subrc = 0.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
no = it_messagetab-msgnr
v1 = it_messagetab-msgv1
v2 = it_messagetab-msgv2
v3 = it_messagetab-msgv3
v4 = it_messagetab-msgv4
IMPORTING
msg = wa_errrec-message.
wa_errrec-lineno = v_index.
*******wa_errrec-lineno = v_index.
*******wa_errrec-message = it_messagetab-msgv1.
APPEND wa_errrec TO it_errrec.
CLEAR wa_errrec.
ENDIF.
ENDIF.
CLEAR : it_bdctab, it_messagetab.
REFRESH: it_bdctab, it_messagetab.
ENDLOOP.
DESCRIBE TABLE it_cust LINES v_totrec.
DESCRIBE TABLE it_errrec LINES v_errrec.
DESCRIBE TABLE it_sucrec LINES v_sucrec.
PERFORM disp_data.
SKIP 2.
IF v_sucrec > 0.
PERFORM disp_success_data.
ENDIF.
SKIP 2.
IF v_errrec > 0.
PERFORM disp_error_data.
ENDIF.
*& Form bdc_dynpro
*# text
*# -->P_0104 text
*# -->P_0105 text
FORM bdc_dynpro USING program
dynpro.
CLEAR it_bdctab.
it_bdctab-program = program.
it_bdctab-dynpro = dynpro.
it_bdctab-dynbegin = 'X'.
APPEND it_bdctab.
ENDFORM. " bdc_dynpro
*& Form bdc_field
*# text
*# -->P_0109 text
*# -->P_IT_cust_LIFNR text
FORM bdc_field USING fnam
fval.
CLEAR it_bdctab.
it_bdctab-fnam = fnam.
it_bdctab-fval = fval.
APPEND it_bdctab.
ENDFORM. " bdc_field
*& Form disp_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_data .
ULINE (45).
WRITE : / sy-vline,
12 'FAMD CUSTOMER UPDATE SUMMARY'(004) COLOR 1,
45 sy-vline.
ULINE /(45).
WRITE : / sy-vline,
'Total Records Processed'(007),
28 '=',
30 v_totrec,
45 sy-vline,
/ sy-vline,
'Error Records'(005),
28 '=',
30 v_errrec,
45 sy-vline,
/ sy-vline,
'Successful Records'(006),
28 '=',
30 v_sucrec,
45 sy-vline.
ULINE /(45).
ENDFORM. " disp_data
*& Form disp_success_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_success_data .
ULINE (45).
WRITE : / sy-vline,
14 'Successful Records'(012) COLOR 1,
45 sy-vline.
ULINE /(45).
WRITE : / sy-vline ,
'Customer Number'(010) COLOR 2,
17 sy-vline,
25 'Customer Name'(011) COLOR 2,
45 sy-vline.
ULINE /(45).
LOOP AT it_sucrec INTO wa_sucrec.
WRITE: / sy-vline ,
wa_sucrec-cnum,
17 sy-vline,
19 wa_sucrec-cnam,
45 sy-vline.
ENDLOOP.
ULINE /(45).
ENDFORM. " disp_success_data
*& Form disp_error_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_error_data .
ULINE (85).
WRITE : / sy-vline,
35 'Error Records'(013) COLOR 1,
85 sy-vline.
ULINE /(85).
WRITE : / sy-vline,
'Record Number'(008) COLOR 2,
sy-vline,
37 'Reason for error'(009) COLOR 2,
85 sy-vline.
ULINE /(85).
LOOP AT it_errrec INTO wa_errrec.
WRITE : / sy-vline,
wa_errrec-lineno,
17 sy-vline,
wa_errrec-message,
85 sy-vline.
ENDLOOP.
ULINE /(85).
ENDFORM. " disp_error_dataWorked out n found the solution
-
Not able to display javascript alert message from within a pl/sql block
Hello,
Can anyone please help me out with this issue. I wanted to display an javascript alert message from within a pl/sql block for an update button. Below is sample code which i am using. P1_ITEM is my hidden item on the report.
begin
if :P1_ITEM IS NOT NULL then
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
HTP.p ('</script>');
end if;
end;
and I have made this code to be executed conditionally when request = Expression1
Expression1: SUBMIT
The thing is I am not able to display an alert message when the update button is clicked.
Can anyone please help me with this one.
Thanks,
Ortonvarad but I also have an update statement within that block for the update button something like this i want to achieve.
begin
if :P1_ITEM IS NULL THEN
update sample_tbl
set col1 =:APP_USER,
col2 = 'Y'
where pk_col = ---;
commit;
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Successfully assigned an item!'');');
HTP.p ('</script>');
end if;
if :P1_ITEM IS NOT NULL then
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
HTP.p ('</script>');
end if;
end;
thanks,
Orton -
i was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?
I have the exact same issue. I can print one document and then I get the error mentionned above ("adobe creation cannot continue because acrobat is not activated"). Then I need to reboot in order to be able to print a new document.
I have suite and went to Photoshop as suggested, but this program is already activated. I tried to launch Acrobat Pro but it won't.
I'm using the Design and Web Premium CS6 Suite on Windows Vista.
Thank you so much for your help. -
I am not able to send text messages to one particular person. Error comes back to enter a valid 10-digit phone number or short code. I have deleted this contact and re-entered numerous times and still get the same error code. Any ideas?
Are you entering a 10 digit number? Or, if it is not a North American number or you are not in North America, are you entering "+" followed by the country code and number?
-
After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second: iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126). I have tried reinstalling a number of times and restarting computer but no luck.
This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation. -
Prb display error message while creating PR at ME51n in ME_PROCESS_REQ_CUST
Hi All,
I have this requirement to check the cost center availability in PR screen (ME51n).
If cost center in the Account assignment tab is not empty, display error message and not able to create the PR.
With my code below, it doesn't triggered the error message and PR created.
Could anyone help?
METHOD if_ex_me_process_req_cust~process_account.
DATA: w_account_ref TYPE exkn.
w_account_ref = im_account_ref->get_data( )
IF w_account_ref-kostl IS NOT INITIAL.
MESSAGE e303(ME) WITH text-001 w_account_ref-kostl text-002.
ENDIF.
ENDMETHOD.
Thank you.
SWHi,
You have to use definition MMPUR_MESSAGE 'E' ME 303 text-001 w_account_ref-kostl text-002.
This will throw the error during check and save instead of message e303(me) .
Hope it helps.
Sujay
Edited by: Sujay Venkateswaran Krishnakumar on Oct 5, 2010 2:54 PM -
Display error message in Campaigns - Planning profile templates
Hi experts,
I am facing an issue while trying to display error message in plannign profile template for campaigns.
Issue is that even though i am able to add the error message to the parent campaign message container, it is not being displayed on the UI screen message area(refresh is not happening) until the next screen refresh happens through another event like change of planning profile drop down / f2 pop up being closed on the message area etc.
I need to display the error message as soon as it gets added in the global message container.Is there any way that i can refresh the UI from this method which would display my error message? I think round trip might work here
I am tryign to add the message in the method IF_FLEX_DATA_PROVIDER~MODIFY_DATA of component KFPED_LAYOUT .
But it doesn't get reflected in the message area.
Appreciate a lot if anybody can help me out here.
Thanks
Swapna.Closing the thread. Resolved myself .
Thanks.
Swapna V. -
Hi All
I am working on IBase scenario for my client, I am new to the IBase scenario. Here we are creating installation base for two to five levels of product.
Once we create IBase for lower level then this IBase is inserted in upper level IBase. Like this we assign all levels based on product.In some cases we need to unassign any of IBase from its upper level IBase. When it is unassigned we are not able to display the IBase which unassigned. When it is unassigned from upper level how come system not able to display this IBase. If we speak functionally the part (IBase) which is unassigned should be valid to assign in any other upper level IBase in feature.
The error I am getting for above is
Serial number XXXXXXX for material XXXXXXX does not exist in any IBase
Message no. IQ122
Diagnosis
Serial number BMF3000106 for material S24-D5022-C100-6 does not exist in any installed base on 31.03.2015 at 10:22:09.
System Response
The system cancels processing.
Hi experts please suggest.
Regards
KesavaHello Kesava
Can you please explain in detail what exactly you are trying to do while assigning and unassigning Ibase.
Regards
Naresh -
IE02 not able to display class overview & measuring point/counter tab,
Hi Dear,
I am not able to display class overview & Measuring point/counter tab in T-code IE02.
But it is display in IE01 & IE03.
Kindly suggestMayursinh Dayatar,
Its probably an authorisation issue.
Are there any error messages??
PeteA -
Display error message in batch job log
Hello
I have a batch job running and I have an error coming during some validation logic.
The problem is I need to continue the batch job when this error message comes and it should not cancel the batch job as it is doing currently but display that error message in batch job log, there are more similar error messages coming in job log and job gets finished, but when my error message comes job gets cancelled.
I cannot give it as info message as it will give wrong idea about message type.
Is there any FM by which we can add message in job log?Sanjeev I have done that but problem is I do not want to give that as Information message but Error message only and continue processing.
If you see in screenshot 3rd message is given by me as information and you can see error messages also 6th and 7th and job continued till it is finished
Basically I want that 'I' to be displayed as 'E'.
Display error message in batch job log -
My iPad receives email on the hotel wifi but will not send. The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged. Restarting iPad did not help.
I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message. I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message. Is there some trick to this? Very frustrating!
Maybe you are looking for
-
Mail & Mavericks & Keychain Access
Hello, After updating to Mavericks (from Mountain Lion), I noticed that there's a new keychain called "local items" inside Keychain Access App. so I have a couple of questions regarding this and my usage of Mail: 1) from what I read in this forum, "l
-
Worried upgrading OSX Mountain Lion 10.8 because of...
Hi to All! I'm already a MBP user for 1 year and since then I didn't upgrade my OSX. I'am worried because the time I bought my MBP one of my friend upgrade the OSX to 10.8 by using his usb thumb drive I didn't have the chance to asked hm if that is p
-
hi gurus how can i read a sapexit for a standard variable created by sap. i need to replicate that same code and modify it and make my own user exit for a custom variable. thanks
-
Hi! When can we expect to see a working version of skype for web on the Chromebook? The only solution to running skype on it currently is either a (crappy) third party app/website or installing the android version which, to be blunt, is badly optimiz
-
Revision: 6476 Author: [email protected] Date: 2009-05-01 14:08:56 -0700 (Fri, 01 May 2009) Log Message: