Not able to Use it after resetting phone to its factory setting !!
My brother bought an Iphone 4s from his friend. We did reset in order to remove his friend's accounts and everything phone had in it. What happened is we're not able login as It turned out FindMyIphone app was installed and nobody knows the login details including his friend It's been 3 days and I can't see my little brother's sad face. Anyone ?
If the iPhone has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device - then you will need that information, or you'll need to get the previous owner to remove the device from his/her iCloud account:
http://support.apple.com/kb/PH2702
If your brother's "friend" has forgotten his Apple ID and password, the "friend" will have to recover it, either by this web page:
https://iforgot.apple.com
or by calling Apple Support and asking to speak with Account Security.
If this "friend" is unable or unwilling to recover his Apple ID so as to be able to clear Activation Lock, then the device is unusable. Your brother should return the iPhone to this "friend" and get his money back.
Regards.
Similar Messages
-
Not able to use Mac after booting windows from bootcamp!
Hello,
In my Mac mini, I dual booted it by installing windows on it using bootcamp!
Could you help me how to go to mac partition and i am also not able to use windows!
Pls help
Punit Khatri
+91-9925326095Hi there:
You may be able to start up the Mac in such a way as to look
for an OS X volume at the same time using a keyboard comb-
ination at startup... Press key(s) immediately after start tone.
Press Option (opt) key during startup will start in Startup Manager
where you can select an OS X volume or network volume to run.
{There is also a way to choose a hardware test for diagnostic
purposes on startup, too. Some macs have features in the OS
to include a 'recovery' mode on later models.}
• Startup key combinations for Intel-based Mac:
http://support.apple.com/kb/HT1533
PS: if you decide to remove Windows, you should also
consider Boot Camp to remove the partition it made.
Hopefully this helps.
Good luck & happy computing! -
After reset iphone 4 to factory setting, i can't charge my hp
Hi,
I resetted iphone 4 to factory setting so i can pass it to my brother since i brought a new iphone 5. But when my brother took over this iphone 4, he can't charged the iphone & it seems that the battery can't hold the power. Tried using both charger & USB, the same problem persisted. Does anybody experience such problom? thanks.
Regards,I tried that but I still got the message "Unable to verify account information." I saved it anyway and when I go to the Exchange email account it says "Cannot Get Mail" "The connection to the server failed." We are running Microsoft Exchange 2010 and I was always able to sync my calendar and email before I upgraded to IOS 6.
-
plz help me out of it am very much frustated of it
You have hacked your phone with Turbo SIM. You cannot get any help here for hacked phones. Contact the place/person who sold you the SIM. Surely, they have support services, don't they?
-
Not able to use Commit after the function module STATUS_OBJECT_CREATE
I am using function module STATUS_OBJECT_CREATE
CALL FUNCTION 'STATUS_OBJECT_CREATE'
EXPORTING
CHGKZ = 'X'
CLIENT = SY-MANDT
OBJNR = LV_OBJNR3
OBTYP = 'IWE'
STSMA = 'ZS_RE_01'
IMPORTING
OBJNR = LV_OBJNR3.
STONR = LV_STONR.
IF SY-SUBRC = 0.
COMMIT WORK.
ENDIF.
i am getting error after the COMMIT WORK .
I am not getting any issue in the function module .after the function module i am using the COMMIT WORK and i am getting the following error message
Category ABAP Programming Error
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
ABAP Program SAPLBSVU
Application Component CA-GTF-TS-SMT
Date and Time 03/17/2014 07:01:29
|Short text |
| The ABAP/4 Open SQL array insert results in duplicate database records. |
|What happened? |
| Error in the ABAP Application Program |
| |
| The current ABAP program "SAPLBSVU" had to be terminated because it has |
| come across a statement that unfortunately cannot be executed. |
|What can you do? |
| Note down which actions and inputs caused the error. |
| |
| |
| To process the problem further, contact you SAP system |
| administrator. |
| |
| Using Transaction ST22 for ABAP Dump Analysis, you can look |
| at and manage termination messages, and you can also |
| keep them for a long time. |
|Error analysis |
| An exception occurred that is explained in detail below. |
| The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught |
| in |
| procedure "STATUS_UPDATE" "(FUNCTION)", nor was it propagated by a RAISING |
| clause. |
| Since the caller of the procedure could not have anticipated that the |
| exception would occur, the current program is terminated. |
| The reason for the exception is: |
| If you use an ABAP/4 Open SQL array insert to insert a record in |
| the database and that record already exists with the same key, |
| this results in a termination. |
| |
| (With an ABAP/4 Open SQL single record insert in the same error |
| situation, processing does not terminate, but SY-SUBRC is set to 4.) |
|How to correct the error |
| Use an ABAP/4 Open SQL array insert only if you are sure that none of |
| the records passed already exists in the database. |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB" |
| "SAPLBSVU" or "LBSVUU01" |
| "STATUS_UPDATE" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| |
| The exception must either be prevented, caught within proedure |
| "STATUS_UPDATE" "(FUNCTION)", or its possible occurrence must be declared in |
| the |
| RAISING clause of the procedure. |
| To prevent the exception, note the following: |
|System environment |
| SAP Release..... 702 |
| SAP Basis Level. 0010 |
| |
| Application server... "sds6ci" |
| Network address...... "11.224.101.53" |
| Operating system..... "Linux" |
| Release.............. "2.6.18-194.el5" |
| Hardware type........ "x86_64" |
| Character length.... 16 Bits |
| Pointer length....... 64 Bits |
| Work process number.. 17 |
| Shortdump setting.... "full" |
| |
| Database server... "gctsdb01lds.hsi.hugh" |
| Database type..... "ORACLE" |
| Database name..... "DS6" |
| Database user ID.. "SAPDS4" |
| |
| Terminal.......... "GCTEMP02VDI" |
| |
| Char.set.... "C" |
| |
| SAP kernel....... 720 |
| created (date)... "Sep 14 2013 05:28:14" |
| create on........ "Linux GNU SLES-9 x86_64 cc4.1.2 use-pr130820" |
| Database version. "OCI_102, 10.2.0.5.0, V2, default" |
| |
| Patch level. 500 |
| Patch text.. " " |
| |
| Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*" |
| SAP database version. 720 |
| Operating system..... "Linux 2.6, Linux 3" |
| |
| Memory consumption |
| Roll.... 1317248 |
| EM...... 0 |
| Heap.... 0 |
| Page.... 0 |
| MM Used. 1242912 |
| MM Free. 53400 |
|User and Transaction |
| Client.............. 160 |
| User................ "DV018458" |
| Language key........ "E" |
| Transaction......... "SE38 " |
| Transaction ID...... "5323C30FC9364665E10000000BE06533" |
| |
| EPP Whole Context ID.... "002655EE0F241ED3ABB7D81260A28C44" |
| EPP Connection ID....... 00000000000000000000000000000000 |
| EPP Caller Counter...... 0 |
| |
| Program............. "SAPLBSVU" |
| Screen.............. "RSM13000 3000" |
| Screen Line......... 2 |
| Debugger Active..... "none" |
|Information on where terminated |
| Termination occurred in the ABAP program "SAPLBSVU" - in "STATUS_UPDATE". |
| The main program was "RSM13000 ". |
| |
| In the source code you have the termination point in line 60 |
| of the (Include) program "LBSVUU01". |
| The program "SAPLBSVU" was started in the update system. |
| The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in |
| procedure "STATUS_UPDATE" "(FUNCTION)", but it was neither handled locally nor |
| declared |
| in the RAISING clause of its signature. |
| |
| The procedure is in program "SAPLBSVU "; its source code begins in line |
| 1 of the (Include program "LBSVUU01 ". |
|Source Code Extract |
|Line |SourceCde |
| 30| LOOP AT jsto_upd WHERE chgkz = 'X'. |
| 31| CHECK: jsto_upd-chgnr > '000', |
| 32| jsto_upd-stsma NE jsto_upd-stsma_old. |
| 33| CLEAR jcdo_tab. |
| 34| MOVE-CORRESPONDING jsto_upd TO jcdo_tab. |
| 35| MOVE-CORRESPONDING chdat TO jcdo_tab. |
| 36| jcdo_tab-stsma_new = jsto_upd-stsma. |
| 37| APPEND jcdo_tab. |
| 38| ENDLOOP. |
| 39|* Änderungen zu Einzelstatus (Insert) |
| 40| LOOP AT jest_ins WHERE chgkz = 'X'. |
| 41| CHECK jest_ins-chgnr > '000'. |
| 42| CLEAR jcds_tab. |
| 43| MOVE-CORRESPONDING jest_ins TO jcds_tab. |
| 44| MOVE-CORRESPONDING chdat TO jcds_tab. |
| 45| jcds_tab-chind = 'I'. |
| 46| APPEND jcds_tab. |
| 47| ENDLOOP. |
| 48|* Änderungen zu Einzelstatus (Update) |
| 49| LOOP AT jest_upd WHERE chgkz = 'X'. |
| 50| CHECK jest_upd-chgnr > '000'. |
| 51| CLEAR jcds_tab. |
| 52| MOVE-CORRESPONDING jest_upd TO jcds_tab. |
| 53| MOVE-CORRESPONDING chdat TO jcds_tab. |
| 54| jcds_tab-chind = 'U'. |
| 55| APPEND jcds_tab. |
| 56| ENDLOOP. |
| 57|* Verbuchung Statusobjekte |
| 58| DESCRIBE TABLE jsto_ins LINES sy-tabix. |
| 59| IF sy-tabix > 0. |
|>>>>>| INSERT jsto CLIENT SPECIFIED |
| 61| FROM TABLE jsto_ins. |
| 62| ENDIF. |
| 63| DESCRIBE TABLE jsto_upd LINES sy-tabix. |
| 64| IF sy-tabix > 0. |
| 65| field-symbols <fs_jsto_line> like jsto_upd. |
| 66| loop at jsto_upd assigning <fs_jsto_line>. |
| 67| IF <fs_jsto_line>-chgnr = '000'. |
| 68| <fs_jsto_line>-chgnr = '999'. |
| 69| ENDIF. |
| 70|* on change of status profile delete user status related to old profile |
| 71| IF <fs_jsto_line>-STSMA NE <fs_jsto_line>-STSMA_OLD. |
| 72| DELETE FROM JEST CLIENT SPECIFIED WHERE |
| 73| MANDT = <fs_jsto_line>-MANDT AND |
| 74| OBJNR = <fs_jsto_line>-OBJNR AND |
| 75| STAT LIKE 'E%'. |
| 76| DELETE FROM JCDS CLIENT SPECIFIED WHERE |
| 77| MANDT = <fs_jsto_line>-MANDT AND |
| 78| OBJNR = <fs_jsto_line>-OBJNR AND |
| 79| STAT LIKE 'E%'. |i tried with out using commmit but it is not creating Status.
When i see the function module help and they are trying to COMMIT
FU STATUS_OBJECT_CREATE
Short Text
Create Status Object
Functionality
The function module generates a status object.
Take the object number from the object number management (function modules OBJECT_NUMNBER_GET_xx).
If no object number is given, the module takes a temporary object number that must be replaced later (function module STATUS_OBJECT_SWITCH_NUMBER).
Example
Creating an internal order with number 100123 (object type "ORC") for status profile "STATSCHEM" with final object number
call function 'OBJECT_NUMBER_GET_OR'
exporting
aufnr = '100123'
importing objnr = objektnummer.
call function 'STATUS_OBJECT_CREATE'
exporting
objnr = objektnummer
obtyp = 'ORC'
stsma = 'STATSCHEM'.
commit work.
Creating the same order with a temporary object number
data: objectkey like ionra.
* TBO00-REFSTRUCT for object type 'OR' is 'IONRA'
objectkey-aufnr = '100123'.
call function 'STATUS_OBJECT_CREATE'
exporting
i_objectkey = objectkey
obtyp = 'ORC'
stsma = 'STATSCHEM'.
importing
objnr = objektnummer.
call function 'OBJECT_NUMBER_GET_OR'
exporting
aufnr = '100123'
importing objnr = objektnummer_neu.
call function 'STATUS_OBJECT_SWITCH_NUMBER'
exporting
objnr_old = objektnummer
objnr_new = objektnummer_neu.
commit work.
Notes -
Not able to use db link if i reference its name from value of item in apex
Hello
I am trying to use following but not working
:P16_db_link = 'link2home'
link2home is database link already created by me.
I am running one report which is using PL/sql function as source returning one sql
SOURCE of Report
==============
declare
com varchar2(4000);
dbln varchar2(100);
begin
dbln:=':P16_DB_LINK';
select 'select * from v$instance@'||dbln into com from dual;
return com;
end;
It is giving me error while report is loaded that 'db link name expeceted'
any help is appreciatedHi user629322 ,
Just try modifiying it
declare
com varchar2(4000);
dbln varchar2(100);
begin
dbln := :P16_DB_LINK;
com := 'select * from v$instance@'||dbln ||'from dual';
return com;
end;
Good Luck
bye
Srikavi
Message was edited by:
srikavi -
I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3.
However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via email.
Installation was rejected because I need the iOS.4.3
Thanks for your help
MichaelThat situation went from inconvenient to complicated quickly. Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled. I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned. Sorry this happened the way it did. Definitely not efficient.
-
TS1398 After upgrade to iOS 6 i am not able to use wifi.
Connected, but no wifi traffic (at home).
After upgrade to iOS 6 i am not able to use wifi. I am connected to my home wifi but no trafic is coming through (safari, skype, twitter, app store). I have even tried recovery of my iPhone 4S using iTunes as well as using iPhone. But without effect.
Can not connect at all (at work).
Thank you for helpfull advice.
Vladimir
Please do not give me advice like:
switch proxy to auto
turn the flight mode on and off
turn the iphone on and off
release the ip
recovery the network settings
recovery firmware
I have tried all these, but did not work.
PS to apple:
I really did not expect this kind of trouble. If I would want to waste my time "repairing my device", I would buy an android phone!!!!!!This helped me solve the problem:
I have changed the security from TKIP to AES and now my wifi works fine /sofar/.
Targat -
Users are not able to save pdfs after editing. Product is Adobe XI, OS is Win7 64-bit. When saving, an error pops up that the file cannot be saved, it is in use. If they save as a different name, it works. Found several forums/blogs/etc that suggest the problem can be solved by closing the Window7 explorer preview pane. They don't use the preview pane. I figured out that if they completely close the explorer window, they can save. But this means they have to open and close explorer for each file.
Hi, I would like to chime in and say that this problem has not yet been resolved. It is extremely annoying when all I do is highlight a document in the file explorer and I get 5 errors (evenly spaced out about 20 seconds apart telling me that "Microsoft
Word Cannot Start (24)". These errors persist even after windows explorer and word are closed. And I don't want to start terminating processes just to make them stop every time.
I'm a little frustrated with this problem and the other problems I've encountered with MS Office 2013 with file corruption, crashing, 2010 compatibility issues, and the whole host of errors when trying to actually do WORK with Word.
I do work with long, complex reports in Word because that's the best way available for myself (and my coworkers) to use. However, I sincerely regret upgrading to Office 2013 because of it. I love it, all of its features, and its interface, but I simply cannot
use it without problems.
Submitting an official complaint whenever the phone reps start up again in the morning. -
After upgrading to Lion, not able to use a PowerPC Application (Quicken 2007). Any solution?
Quicken Essentials 2010 has less features than Quciken 2007. Keeping track of investments is one feature I need and Quicken Essentials does not include that function. I may have to consider others financial software, such as iBank4, Money4, iFinance, and Money Well.
-
Dynadock U3.0 - Not able to use Ethernet port after Win 8.1 update
Hi everybody,
i am using a Dynadock u3.0 dock with my Vaio SCP 13.
Since I updated my device to Windows 8.1 Update 1 I am not able to use the Ethernet port of the Dynadock.
Before that everything worked fine.
I am not able to reinstall the drivers correctly (tried 7.6m0, 7.5m2). While the driver insaller tries to start i am getting an error message, that the installer is not able to set a bunch of registry Keys (SYSTEM\CurrentControlSet\Services\DisplayLinkGA\D evice1) (till 0). (Image 1)
If i ignore those messages and do install the driver, the Ethernet port will remain uninstalled in the device manager. (Image 2)
If I try to install the driver manually (DisplayLink Network Adapter NCM), Ill get an error message that a driver was found but that the access was denied. (Image 3)
I started the safe mode and could install the driver. But if I reboot to normal mode, the device could not be started.
I also tried to disable UAC and I am logged in as the "real" administrator.
Please find the error messaged attached (in German):
[image 1]: http://picload.org/image/lcalwop/toshiba.png
[image 2]: http://picload.org/image/lcalwoc/toshiba2.png
[image 3]: http://picload.org/image/lcalwlg/toshiba3.png
BTW: If I unzip the installer (7.6m0) and install the *inf for the right ven&dev (4503) it still does not work...
I dont know what to do anymore...Hi
After Windows 8.1 upgrade, you should also update the Display Link driver/software
This is very important!
The latest driver can be downloaded here:
http://www.displaylink.com/support/downloads.php
Note: the old version should be removed! -
My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?
It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.
-
i am using iphone 2G, i have updated IOS 3.1.3, but i am not able to use whatsapp. the newer version of whatsapp is not working in my phone. please give me the solution.
As newer iPhones and iOS versions are made, apps start to drop support for the older versions of the iOS. It looks like you have fallen victim to this. I commend you for sticking with the original iPhone until now, but it looks like it's time for an upgrade if you want to use apps that have dropped support.
Also the new iPhone provides hundreds of new features and spec upgrades from the original. Check it out! http://www.apple.com/iphone/ -
After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.
I had this same problem with what's app. There is a new update for the app on the app store which is compatible with ios8. Update the app, or delete it and re-add it. I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.
Maybe you are looking for
-
Problems getting into rescue mode muvo2
i've had a problem with the sound on this player it was a little quiet for my liking so i want to install the international firmware. Problem is i cant get into rescue mode, my player is fully charged and i was wondering if that is the reason i cant
-
DPM 2012 R2 Looses connectivity with Agents
We're receiving this errors: Event1: The DPM protection agent on server.contoso.com could not be contacted. Subsequent protection activities for this computer may fail if the connection is not established. The attempted contact failed for the followi
-
Some of my directory buttons are being hidden
even though the Z-index is set to 101 and the thing that's covering it up is set to 100. Anyone know what I'm doing wrong? http://friendsoflafayette.org/new_site/photos_videos.html
-
Using JMSServer, Queue in Cluster
Hi - I am using a WLS Queue in the cluster environment. I bound this queue with the JNDI Name logQueue (which is used by other beans, too) and deployed it on serverone. I have another server called servertwo. A
-
Article upload/update is much slower with indesign CC then CS6 was.
Updating Articles from indesign CC through the Folio Builder Panel has become very slow compared to when I was using indesign CS6. Are there different settings that the CC version is using that CS6 wasn't that may be causing this lengthened time-span