Not connecting to mssql server 2012 after Installation

Hi
I am facing problem since yesterday. Not able to connect to msmssql server 2012
On my laptop server name 2012 taken itself. but on PC server name is empty and when I put Computer-name\instancename 
"Lenovo\MSSQLSERVER" then this message come
Cannot connect to MSSQLSERVER.
===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476
Error Number: 53
Severity: 20
State: 0
Program Location:
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
   at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
   at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
   at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
   at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The network path was not found
Please help
I will be grateful.

Hi ORashid,
Try to type in a command prompt the following:
SQLCMD -L
It will list you all SQLSERVER INSTANCES and its names, after that, you can try to connect to the correct name.
Try to check for the protocols (SHARED MEMORY, TCP/IP and NAMED PIPES) are enabled
And finally check if the SQL Server Browser service is running...
Best Regards,
Edvaldo Castro
Edvaldo Castro http://edvaldocastro.com MCITP Database Administrator on SQL Server® 2008 MCITP Database Administrator on SQL Server® 2005 MCTS: SQL Server® 2008 MCTS: SQL Server® 2005 MCT: Microsoft Certified Trainer MTA: Microsoft Technology Associate
MTAC – Microsoft Technical Audience Contributor CCSQLA – Cambridge Certified SQL Associate TOEIC – Test of English for International Communication

Similar Messages

  • Could not connect to SQL Server 2012 Remotely

    Hello, 
    I have a situation as follows:
    The Server
    SQL Server 2012 Standard Edition installed on Windows Server 2012 Standard Edition
    Active Directory is installed on the same server as well
    Remote Access Role added and configured to connect VPN 
    DNS Role added
    Windows Firewall is disabled
    The Server is connected to the internet 
    SQL Server Service & SQL Browser both are running under domain accounts
    SQL Server allows remote connections
    The Router
    The router that connects the server to the Internet is configured to:
    Enable VPN Tunnels Protocols (PPTP, L2TP and IPSec)
    Forwarding > Virtual Servers (all requests on TCP and UDP on all ports to the server local IP)
    The Client
    PC running Windows 7 SP1 with SQL Server 2012 Express 
    Joined AD on the server
    Connected to the internet
    VPN Connected to the Server
    Can Remote Desktop the Server
    Can ping the server host name
    Can nslookup the server host name
    The Problem
    If Both the Server and the Client are connected in the same Local Area Network, Client can connect to the SQL Serve
    Once the Client is placed in different location connected to the Interent, VPN connected as described above, I could not connect to the Server using:
    Windows Authentication Domain Users or
    SQL Server users
    and the error message is:
    Cannot connect to SERVER\SQLINSTANCE.
    ADDITIONAL INFORMATION:
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
    Any thoughts
    Thanks in advance
     

    Hello Hilary,
    I have been working on a small replication test.
    On the Publisher, things went smooth and the Snapshot Agent was able to work and produce a snapshot written in a shared folder located on the Publisher
    On the Subscriber, as I am testing from SQL Server Express, I had run the following command:
    replmerg.exe -Publisher [SERVER\SQLInstance] -PublisherDB [dbRepl] -PublisherSecurityMode 0 -PublisherLogin rplMergeAgent -PublisherPassword p@ssw0rd -Publication [TEST Publication] -Distributor [SERVER\SQLInstance] -DistributorSecurityMode 0 -DistributorLogin
    rplMergeAgent -DistributorPassword p@ssw0rd -Subscriber [SUBSCRIBER\SQLInstance] -SubscriberSecurityMode 0 -SubscriberLogin rplMergeAgent -SubscriberPassword p@ssw0rd -SubscriberDB [dbRepl] -SubscriptionType 1 -OutputVerboseLevel 2 -Output C:\TEMP\mergeagent.log 
    Where 
    SERVER
    Publisher and Distributor
    dbRepl
    Database to replicate
    Merge Agent
    rplMergeAgent
    Subscriber
    SUBSCRIBER
    dbRepl
    Subscriber Database
    Merge Agent
    rplMergeAgent
    Password
    p@ssw0rd
    rplMergeAgent
    SQL Login defined in both Publisher and Subscriber with same password
    Granted the following at Publisher:
    Login to Publication Database (dbRepl)
    Login to Distribution Database (distribution)
    Member of PAL
    Granted the following at Subscriber:
    db_owner fixed database role in Subscription database (dbRepl)
    I couldn't grant rplMergeAgent Read Permission on SnapshotFolder as it is only a SQL Login.
    When I ran the above command line, I received the following error:
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    I am pasting below the whole log file written by the above command:
    2014-04-11 15:38:07.205 Microsoft SQL Server Merge Agent 11.0.2218.0
    2014-04-11 15:38:07.342 Copyright (c) 2008 Microsoft Corporation
    2014-04-11 15:38:07.389 
    2014-04-11 15:38:07.406 The timestamps prepended to the output lines are expressed in terms of UTC time.
    2014-04-11 15:38:07.433 User-specified agent parameter values:
    -Publisher SERVER\SQLInstance
    -PublisherDB dbRepl
    -PublisherSecurityMode 0
    -PublisherLogin rplMergeAgent
    -PublisherPassword **********
    -Publication TEST Publication
    -Distributor SERVER\SQLInstance
    -DistributorSecurityMode 0
    -DistributorLogin rplMergeAgent
    -DistributorPassword **********
    -Subscriber SUBSCRIBER\SQLInstance
    -SubscriberSecurityMode 0
    -SubscriberLogin rplMergeAgent
    -SubscriberPassword **********
    -SubscriberDB dbRepl
    -SubscriptionType 1
    -OutputVerboseLevel 2
    -Output C:\TEMP\mergeagent.log
    2014-04-11 15:38:07.497 Percent Complete: 0
    2014-04-11 15:38:07.517 Connecting to Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:38:07.518 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:07.608 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:07.613 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:07.617 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select
    collationproperty(@collation, N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) &
    0x1 = 0x1 then 0 else 1 end as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:07.637 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {?=call sp_helpsubscription_properties (N'SERVER\SQLInstance', N'dbRepl', N'TEST Publication')}
    2014-04-11 15:38:07.681 Distributor security mode: 0, login name: rplMergeAgent, password: ********.
    2014-04-11 15:38:07.682 Percent Complete: 0
    2014-04-11 15:38:07.683 Connecting to Distributor 'SERVER\SQLInstance'
    2014-04-11 15:38:07.684 Connecting to OLE DB Distributor at datasource: 'SERVER\SQLInstance', location: '', catalog: '', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:25.062 OLE DB Distributor: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: 
    user name: guest
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:28.887 OLE DB Distributor 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:29.842 OLE DB Distributor 'SERVER\SQLInstance': {call sp_helpdistpublisher (N'SERVER\SQLInstance') }
    2014-04-11 15:38:32.198 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:38:33.199 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_merge_agentid (0,N'dbRepl',N'TEST Publication',null,N'dbRepl',100,N'SUBSCRIBER\SQLInstance')}
    2014-04-11 15:38:34.451 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:34.560 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_profile (23, 4, N'')}
    2014-04-11 15:38:36.189 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:36.499 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_get_redirected_publisher(N'SERVER\SQLInstance',N'dbRepl',0)}
    2014-04-11 15:38:37.396 Percent Complete: 0
    2014-04-11 15:38:37.396 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.399 Initializing
    2014-04-11 15:38:37.401 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.403 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:38.427 Percent Complete: 0
    2014-04-11 15:38:38.428 Validating publisher
    2014-04-11 15:38:38.429 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:39.455 Percent Complete: 0
    2014-04-11 15:38:39.456 Connecting to Publisher 'SERVER\SQLInstance'
    2014-04-11 15:38:39.457 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:46.548 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:50.282 OLE DB Publisher 'SERVER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
    N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
    as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:57.393 OLE DB Publisher 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:59.236 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:39:07.271 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:39:45.229 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.234 Percent Complete: 0
    2014-04-11 15:39:45.235 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.236 Retrieving publication information
    2014-04-11 15:39:45.238 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:46.287 Percent Complete: 0
    2014-04-11 15:39:46.288 Retrieving subscription information.
    2014-04-11 15:39:46.290 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.472 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.478 Percent Complete: 0
    2014-04-11 15:40:00.479 Applying the snapshot to the Subscriber
    2014-04-11 15:40:00.480 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:02.535 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:40:03.559 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_mergesubentry_indistdb (0,N'SERVER\SQLInstance',N'dbRepl',N'TEST Publication',N'SUBSCRIBER\SQLInstance',N'dbRepl',1,1,0,N'',?,90)}
    2014-04-11 15:40:04.600 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:40:04.609 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:04.611 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:07.454 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSacquiresnapshotdeliverysessionlock
    2014-04-11 15:40:07.526 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MStrypurgingoldsnapshotdeliveryprogress
    2014-04-11 15:40:07.530 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSissnapshotitemapplied @snapshot_session_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\', @snapshot_progress_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST
    PUBLICATION\20140411082109\Person_2.sch'
    2014-04-11 15:40:24.659 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSreleasesnapshotdeliverysessionlock
    2014-04-11 15:40:24.663 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.665 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:24.690 Percent Complete: 18
    2014-04-11 15:40:24.692 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.693 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:27.541 Percent Complete: 0
    2014-04-11 15:40:27.542 Category:NULL
    Source:  Merge Replication Provider
    Number:  -2147201001
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:28.563 Percent Complete: 0
    2014-04-11 15:40:28.565 Category:AGENT
    Source:  SUBSCRIBER\SQLInstance
    Number:  0
    Message: The process could not read file '\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\Person_2.sch' due to OS error 1326.
    2014-04-11 15:40:28.566 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.568 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.569 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.570 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.571 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.573 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.575 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.577 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.578 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    2014-04-11 15:40:28.579 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    I can say it is about how can the rplMergeAgent read the Shared folder.
    What do you think?

  • Linked Server unable to Connect in SQL Server 2012 after Restarting SQL Server Service it works fine. Why?

    I have created a Linked Server to Access Database of 64 MB in Size located in Remote System to SQL Server 2012.In Start for Some time it works fine and after it is giving the Error 
    OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
    Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
    Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
    Previously I thought it as Permission Issue. By trying some fixes proposed in forums it not fixed. But, after restarting the SQL Server Services without changes to the linked Server it works perfectly. How could i fix it. I don't want restart the SQL Server
    Service it leads to Some other process failures.
    RehaanKhan. M

    After all the Errors, When I am restarting the SQL Server its working correctly.
    Whats the problem it is clearing itself after restarting of SQL Server. Why ?. I can't find anything regarding this in SQL Server .
    The following are the Errors i got connecting to SQl Server.
    OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
    Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
    Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
    Error-2:
    Executed as user: RMS\Administrator. Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST". [SQLSTATE 42000] (Error 7303)  OLE DB provider
    "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.". [SQLSTATE 01000] (Error 7412).  The step failed.
    After unchecking the Allow In Process in OLEDB.ACE Provider Properties.
    Msg 7399, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
    The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" reported an error. Access denied.
    Msg 7301, Level 16, State 2, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
    Cannot obtain the required interface ("IID_IDBCreateCommand") from OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
    for to fix above error i have followed the instructions in the following link,
    http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/08/19/permissions-needed-to-set-up-linked-server-with-out-of-process-provider.aspx
    This also failed to work. I Restarted SQL Server and make the Linked Server Properties Default to my Configuration and it works fine.
    Can you suggest me a solution for this issue. Every time i don't want to restart SQL Server Services as it effects other jobs and Processes.
    Thank you.
    RehaanKhan. M

  • WSUS Windows 7 Client not connecting with WSUS SERVER 2012 R2 Error " 80072ee2"

    Hi ,
            I Have the Non- AD WSUS server 2012 R2 as WSUS server, and widnows 7 ent sp1 as WSUS Client  , the server and client are in teh same ip range and able to ping both server from client and client from server, and both are in teh
    same time zone(EST), But im getting the "80072ee2" when ever i tried to get the updates from client
    Please help me on this
    Thanks 
    Balaji K

    Record the system time of the Windows 7 client.
    Reboot the Windows 7 client.
    Run this command from a command prompt: wuauclt /resetauthorization /detectnow.
    Wait =30= minutes.
    Post the entries from the WindowsUpdate.log starting at the time recorded in Step #1.
    I have noted the time at 12:06 am and reboot the machine. and at 12:27 i have Run this command from a 
    command prompt: wuauclt /resetauthorization /detectnow. and taken the the logs from 11 am to 1 pm 
    2015-02-03 12:15:26:002
    956 f84
    Misc WARNING: Send failed with hr = 80072ee2.
    2015-02-03 12:15:26:002
    956 f84
    Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-03 12:15:26:002
    956 f84
    PT  + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
    2015-02-03 12:15:26:002
    956 f84
    PT  + Caller provided credentials = No
    2015-02-03 12:15:26:002
    956 f84
    PT  + Impersonate flags = 0
    2015-02-03 12:15:26:002
    956 f84
    PT  + Possible authorization schemes used = 
    2015-02-03 12:15:26:002
    956 f84
    PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
    2015-02-03 12:15:26:002
    956 f84
    PT WARNING: PTError: 0x80072ee2
    2015-02-03 12:15:26:002
    956 f84
    PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
    2015-02-03 12:15:26:002
    956 f84
    PT WARNING: RefreshConfig failed: 0x80072ee2
    2015-02-03 12:15:26:002
    956 f84
    PT WARNING: RefreshPTState failed: 0x80072ee2
    2015-02-03 12:15:26:002
    956 f84
    PT WARNING: PTError: 0x80072ee2
    2015-02-03 12:15:26:002
    956 f84
    Report WARNING: Reporter failed to upload events with hr = 80072ee2.
    2015-02-03 12:27:05:651
    956 ca8
    AU Triggering AU detection through DetectNow API
    2015-02-03 12:27:05:651
    956 ca8
    AU Triggering Online detection (non-interactive)
    2015-02-03 12:27:05:652
    956 930
    AU #############
    2015-02-03 12:27:05:652
    956 930
    AU ## START ##  AU: Search for updates
    2015-02-03 12:27:05:652
    956 930
    AU #########
    2015-02-03 12:27:05:654
    956 930
    AU <<## SUBMITTED ## AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
    2015-02-03 12:27:05:654
    956 f84
    Agent *************
    2015-02-03 12:27:05:654
    956 f84
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2015-02-03 12:27:05:654
    956 f84
    Agent *********
    2015-02-03 12:27:05:654
    956 f84
    Agent  * Online = Yes; Ignore download priority = No
    2015-02-03 12:27:05:654
    956 f84
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
    and DeploymentAction='Uninstallation' and RebootRequired=1"
    2015-02-03 12:27:05:654
    956 f84
    Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2015-02-03 12:27:05:654
    956 f84
    Agent  * Search Scope = {Machine}
    2015-02-03 12:27:05:678
    956 f84
    Setup Checking for agent SelfUpdate
    2015-02-03 12:27:05:678
    956 f84
    Setup Client version: Core: 7.5.7601.17514  Aux: 7.5.7601.17514
    2015-02-03 12:27:29:233
    956 f84
    Misc WARNING: Send failed with hr = 80072ee2.
    2015-02-03 12:27:29:233
    956 f84
    Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-03 12:27:29:233
    956 f84
    Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
    2015-02-03 12:27:29:234
    956 f84
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2015-02-03 12:27:29:234
    956 f84
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2015-02-03 12:27:29:234
    956 f84
    Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2015-02-03 12:27:52:795
    956 f84
    Misc WARNING: Send failed with hr = 80072ee2.
    2015-02-03 12:27:52:795
    956 f84
    Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-03 12:27:52:795
    956 f84
    Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
    2015-02-03 12:27:52:796
    956 f84
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2015-02-03 12:27:52:796
    956 f84
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2015-02-03 12:27:52:796
    956 f84
    Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2015-02-03 12:28:16:363
    956 f84
    Misc WARNING: Send failed with hr = 80072ee2.
    2015-02-03 12:28:16:363
    956 f84
    Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-03 12:28:16:364
    956 f84
    Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
    2015-02-03 12:28:16:364
    956 f84
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2015-02-03 12:28:16:364
    956 f84
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2015-02-03 12:28:16:364
    956 f84
    Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2015-02-03 12:28:39:920
    956 f84
    Misc WARNING: Send failed with hr = 80072ee2.
    2015-02-03 12:28:39:920
    956 f84
    Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-03 12:28:39:920
    956 f84
    Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
    2015-02-03 12:28:39:921
    956 f84
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2015-02-03 12:28:39:921
    956 f84
    Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2015-02-03 12:28:39:921
    956 f84
    Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2015-02-03 12:28:39:921
    956 f84
    Misc WARNING: DownloadFileInternal failed for http://135.155.61.172:8530/selfupdate/wuident.cab: error 0x80072ee2
    2015-02-03 12:28:39:921
    956 f84
    Setup WARNING: SelfUpdate check failed to download package information, error = 0x80072EE2
    2015-02-03 12:28:39:921
    956 f84
    Setup FATAL: SelfUpdate check failed, err = 0x80072EE2
    2015-02-03 12:28:39:922
    956 f84
    Agent  * WARNING: Skipping scan, self-update check returned 0x80072EE2
    2015-02-03 12:28:39:923
    956 f84
    Agent  * WARNING: Exit code = 0x80072EE2
    2015-02-03 12:28:39:923
    956 f84
    Agent *********
    2015-02-03 12:28:39:923
    956 f84
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2015-02-03 12:28:39:923
    956 f84
    Agent *************
    2015-02-03 12:28:39:923
    956 f84
    Agent WARNING: WU client failed Searching for update with error 0x80072ee2
    2015-02-03 12:28:39:924
    956 fec
    AU >>##  RESUMED  ## AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
    2015-02-03 12:28:39:924
    956 fec
    AU  # WARNING: Search callback failed, result = 0x80072EE2
    2015-02-03 12:28:39:924
    956 fec
    AU  # WARNING: Failed to find updates with error code 80072EE2
    2015-02-03 12:28:39:924
    956 fec
    AU #########
    2015-02-03 12:28:39:924
    956 fec
    AU ##  END  ##  AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
    2015-02-03 12:28:39:924
    956 fec
    AU #############
    2015-02-03 12:28:39:925
    956 fec
    AU Successfully wrote event for AU health state:0
    2015-02-03 12:28:39:925
    956 fec
    AU AU setting next detection timeout to 2015-02-03 21:23:35
    2015-02-03 12:28:39:926
    956 fec
    AU Successfully wrote event for AU health state:0
    2015-02-03 12:28:39:928
    956 fec
    AU Successfully wrote event for AU health state:0
    2015-02-03 12:29:03:495
    956 f84
    Misc WARNING: Send failed with hr = 80072ee2.
    2015-02-03 12:29:03:495
    956 f84
    Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-03 12:29:03:496
    956 f84
    PT  + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
    2015-02-03 12:29:03:496
    956 f84
    PT  + Caller provided credentials = No
    2015-02-03 12:29:03:496
    956 f84
    PT  + Impersonate flags = 0
    2015-02-03 12:29:03:496
    956 f84
    PT  + Possible authorization schemes used = 
    2015-02-03 12:29:03:496
    956 f84
    PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
    2015-02-03 12:29:03:496
    956 f84
    PT WARNING: PTError: 0x80072ee2
    2015-02-03 12:29:03:496
    956 f84
    PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
    2015-02-03 12:29:03:496
    956 f84
    PT WARNING: RefreshConfig failed: 0x80072ee2
    2015-02-03 12:29:03:496
    956 f84
    PT WARNING: RefreshPTState failed: 0x80072ee2
    2015-02-03 12:29:03:496
    956 f84
    PT WARNING: PTError: 0x80072ee2
    2015-02-03 12:29:03:496
    956 f84
    Report WARNING: Reporter failed to upload events with hr = 80072ee2.
    2015-02-03 12:29:03:496
    956 f84
    Report REPORT EVENT: {B6636CDB-B0BF-4CDE-BEB3-D49C1CEC258F}
    2015-02-03 12:28:39:921-0800 1
    148 101
    {D67661EB-2423-451D-BF5D-13199E37DF28}
    1 80072ee2
    SelfUpdate Failure
    Software Synchronization Windows Update Client failed to detect with error 0x80072ee2.
    2015-02-03 12:29:03:510
    956 f84
    Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2015-02-03 12:29:03:510
    956 f84
    Report WER Report sent: 7.5.7601.17514 0x80072ee2 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
    2015-02-03 12:29:03:510
    956 f84
    Report CWERReporter finishing event handling. (00000000)
    2015-02-03 12:29:27:075
    956 f84
    Misc WARNING: Send failed with hr = 80072ee2.
    2015-02-03 12:29:27:075
    956 f84
    Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-03 12:29:27:075
    956 f84
    PT  + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
    2015-02-03 12:29:27:075
    956 f84
    PT  + Caller provided credentials = No
    2015-02-03 12:29:27:075
    956 f84
    PT  + Impersonate flags = 0
    2015-02-03 12:29:27:075
    956 f84
    PT  + Possible authorization schemes used = 
    2015-02-03 12:29:27:075
    956 f84
    PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
    2015-02-03 12:29:27:075
    956 f84
    PT WARNING: PTError: 0x80072ee2
    2015-02-03 12:29:27:076
    956 f84
    PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
    2015-02-03 12:29:27:076
    956 f84
    PT WARNING: RefreshConfig failed: 0x80072ee2
    2015-02-03 12:29:27:076
    956 f84
    PT WARNING: RefreshPTState failed: 0x80072ee2
    2015-02-03 12:29:27:076
    956 f84
    PT WARNING: PTError: 0x80072ee2
    2015-02-03 12:29:27:076
    956 f84
    Report WARNING: Reporter failed to upload events with hr = 80072ee2.
    2015-02-03 12:53:05:793
    956 930
    AU AU received policy change subscription event
    2015-02-03 12:58:26:707
    956 8fc
    Misc WARNING: Send failed with hr = 80072ee2.
    2015-02-03 12:58:26:707
    956 8fc
    Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-03 12:58:26:708
    956 8fc
    PT  + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
    2015-02-03 12:58:26:708
    956 8fc
    PT  + Caller provided credentials = No
    2015-02-03 12:58:26:708
    956 8fc
    PT  + Impersonate flags = 0
    2015-02-03 12:58:26:708
    956 8fc
    PT  + Possible authorization schemes used = 
    2015-02-03 12:58:26:708
    956 8fc
    PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
    2015-02-03 12:58:26:708
    956 8fc
    PT WARNING: PTError: 0x80072ee2
    2015-02-03 12:58:26:708
    956 8fc
    PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
    2015-02-03 12:58:26:708
    956 8fc
    PT WARNING: RefreshConfig failed: 0x80072ee2
    2015-02-03 12:58:26:708
    956 8fc
    PT WARNING: RefreshPTState failed: 0x80072ee2
    2015-02-03 12:58:26:708
    956 8fc
    PT WARNING: PTError: 0x80072ee2
    2015-02-03 12:58:26:708
    956 8fc
    Report WARNING: Reporter failed to upload events with hr = 80072ee2.

  • Emails not being kept on server anymore after installation of office 365

    since installing office 365 my emailsare no longer kept on the server The settings om outlook havn't changed and they should stay there for weeks Any suggestion ?

    I'd check to make sure it's not set to download/delete email from the server when fetching it, just in case.

  • 'could not connect to administration server" in essbase console

    Hello friends,
    while i was trying to login to eas console iam getting this error message as "could not connect to administration server" even after restarting the services.
    Thanks in Advance..

    Rakesh,
    Is this the first time you are trying to log on to EAS console ?
    First check if your database is up or not ( with which essbase configuration is done).
    If your db services are running, then Go to Oracle EPM system, EAS and Start Administration Services from Start Programs ( I assume you are on 11 and on Windows).
    If still you get the same problem, then check the logs.
    @Prabhas,
    To my knowledge and based on Essbase architecture, both EAS and Essbase services are different. If Essbase is up and EAS is down, still you can access Essbase through add-in or some other tools.

  • Not able to get the connection to mssql server thro native sql

    Dear Experts,
               I have created a database connection to mssql server thro DBCO t.code.Am not able to get the connection when i am executing Native SQl for geting connection of mssql server.
    DATA: CON_NAME LIKE DBCON-CON_NAME VALUE 'BIW'.
    EXEC SQL.
      CONNECT TO :con_name AS 'C1'
    ENDEXEC.
    Am always getting sy-subrc = 4. The user name and password i have given in dbcon table having full authorization to access mssql database. I am working SAP ecc 5.0. Also both servers are running in windows.
    could anyone hlep me on this issue.
    Thanks in advance.

    Hello, the submitted error must be analyzed according to the Syntaxis and characteristics of the MSSQL database. See explanation of error.
    http://doc.ddart.net/mssql/sql2000/html/trblsql/tr_reslsyserr_1_1o1i.htm
    Error 156
    Severity Level 15
    Message Text
    Incorrect syntax near the keyword '%.*ls'.
    Explanation
    This error indicates that the syntax of a Transact-SQL statement is incorrect and that the syntax error was detected near the keyword specified in the error message. The most frequent causes for syntax errors are misspellings of Transact-SQL keywords or operators, and specifying the syntax of a Transact-SQL statement in the wrong order.
    One of the more complicated causes for this error may be a compatibility level mismatch for the current database. If the current database has a compatibility level other than 70, Microsoft® SQL Serveru2122 will not recognize any of the keywords that a database with a compatibility level of 70 would recognize.
    Action
    First, check the Transact-SQL statement syntax near the keyword specified in the error message. Because Transact-SQL language syntax can be very complex, SQL Server may incorrectly report the position of the syntax error as later in the Transact-SQL statement than it actually occurred. Second, reexamine the entire Transact-SQL statement that generated the error. Verify the syntax order of the statement.
    Ensure that the database does not have a compatibility level of 65 and has a compatibility level of 70.

  • HT201263 the itunes tales me that can not connect to update server, i tried to connect my i pad ever ting is ok to the ipad but my iphone stop working after update and i tried all solutu=ion suggested on the internet please i need help

    after i update the iphone 4s to ios 6.1.1 my i phone stop responding and a message appear tell to connect to i tune i did all the solution and put my iphone in dfu mode and nothing happen my i phone is gone no solution and a message appear tells that can not connect to update server but my ipad work at the same pc the problem in the i phone, plz some help

    Was thje TM backup 10.6 also?
    I never use TM for Backups, far better less painful backup methods, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imagine something not being covered there.

  • TS3276 iCloud email on OSX 10.8 does not connect to the server after sleep

    iCloud email on OSX 10.8 does not connect to the server after sleep.  The only way I can reconnect the iCloud email is to restart the computer. Does anyone have any ideas how to resolve this issue?

    I would suggest you try opening "Mail">click on "Mailboxes" in the Menu Bar> and select "Rebuild" from the list.  That may solve it.

  • Can anyone help - my mail on my ipad will not connect to the server. My internet access is fine. How can I get my email to connect to the server?

    My ipad will not connect tot he server when trying to access my mail. This has been happening since last Sunday. Some have said it is due to the latest software update. I am able to connect to the internet.
    I am not having this issue on iPhone.
    I checked all the settings, the wireless router in my house and at work.
    I have completed a hard reset of the device.
    I had our IT guy at work look at it.
    He said to contact Apple....
    Any thoughts?
    Thanks!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    Gmail Account Will Not Connect to Gmail Server
    http://support.apple.com/kb/ts3058
    Error: “Server Unavailable” when accessing Yahoo on iOS devices
    https://help.yahoo.com/kb/mobile-mail/error-server-unavailable-accessing-yahoo-i os-devices-sln8834.html?impressions=true
    Unable to Delete eMail Messages
    http://support.apple.com/kb/TS2475
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to delete ALL mail messages from iPhone/iPad in one step
    http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
    How to Attach Photos and Videos to Emails on an iPhone or  iPad
    http://www.wikihow.com/Attach-Photos-and-Videos-to-Emails-on-an-iPhone-or-iPad
    iPad Basics: Sending an Email With An Attachment
    http://ipadacademy.com/2012/03/ipad-basics-sending-an-email-with-an-attachment
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Send Multiple email Attachments from your iPad or iPhone
    http://ipadacademy.com/2014/03/how-to-send-multiple-email-attachments-from-your- ipad-or-iphone
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    Importing a Contact List CSV to the iPad
    http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email! Mail Client with Attachments and Cloud Services
    https://itunes.apple.com/app/group-email!-mail-client-attachments/id380690305?mt =8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
    How to delete an email account on your iPad
    http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
     Cheers, Tom

  • Cannot not connect to SQL Server instance.

    Hello,
    I have SQL Server 2012 installed and when I run this command:
    sc query mssql$MSSQLSERVER
    I get this error:
    [SC] EnumQueryServicesStatus:OpenService FAILED 1060:
    The specified service does not exist as an installed service.
    I run this command on the same server where SQL Server is installed.  Databases are on the same server too.  TCP/IP is enabled for the instance and port 1433 is open on the server's firewall. SQL Server Browser is running.
    Many errors in the SQL Server error logs like:
    SQLServer Error: 11001, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct.
    SQLServer Error: 11001, TCP Provider: No such host is known. [SQLSTATE 08001]
    Any ideas what could  have gone wrong?
    Thanks,
    Paul
    Paul

    Hi Paul,
    According to your description, you fail to connect to SQL Server 2012 instance. According to the SQL Server error log, based on my research, your issue could be due to that
    the client cannot resolve the name of the SQL Server instance.
    Are the errors from the SQL Server error log solved? If the errors are not solved, please follow the steps below to troubleshoot the issue.
    1. Make sure you are able to ping the physical server where SQL Server is installed from the client machine. If not, you can try to connect to the SQL Server using an IP Address (for default instance) or IP Address\Instance Name
    for a named instance.
    2. Make sure you are using the correct instance name. When you connect to a default instance, machine name is the best representative for the instance name and when you connect to a named instance such as sqlexpress, you should
    specify machinename\instancename according to
    Niting123’s post. And you could verify if you use the right instance name in SQL Server configuration manager according to
    Niting123’s post.
    3. Check that SQL Server is in the network. You can use the SQLCMD -L command to retrieve the list of SQL Server installed in the network. Note that this will only return SQL Servers if the SQL Server Browser service is running.
    4. Make sure that you enable Named Pipes besides TCP/IP protocol.
    5. Check to see if remote connections is enabled. Right click on the server name in SSMS and select Properties. Go to the Connections tab and make sure Allow remote connection to this server is checked.
    6. Locally connect to SQL Server and check the error log for the port entry.
    7. To connect to SQL Server instance using TCP/IP from another computer, on the SQL Server computer, you must configure the firewall to allow connections to the TCP port used by the Database Engine. If you are connecting to a named
    instance or a port other than TCP port 1433, you must also open the UDP port 1434 for the SQL Server Browser service according to pasquale’s post.
    For step by step instruction on opening a port in the Windows firewall, see
    How to: Configure a Windows Firewall for Database Engine Access
    For more information about the process, please refer to the article:
    http://www.mssqltips.com/sqlservertip/2340/resolving-could-not-open-a-connection-to-sql-server-errors/
    In addition, you mention that there are many other errors, so please provide the SQL Server error log for analysis.
    Regards,
    Michelle Li

  • Configuring OS X Server 3.1.2 :  server.app fails with "Could Not Connect to the Server"

    Hi All,
    I am trying to install OS X Server using server.app 3.1.2. but after installation when i try to connect it is giving "Could Not Connect to the Server" error. is there any way to find out the logs or debug this problem. Since the error isn't giving any indication of the reason of the failure.

    Hi Linc,
    Thanks for you prompt reply, below are the logs....
    9/15/14 7:56:58.229 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 7:57:28.287 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 7:57:58.315 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 7:58:24.653 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
    9/15/14 7:58:28.379 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 7:58:58.428 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 7:59:13.752 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
    9/15/14 7:59:28.496 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 7:59:58.568 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 8:00:06.460 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
    9/15/14 8:00:16.854 AM Console[369]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
    9/15/14 8:00:28.567 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 8:00:58.623 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 8:01:16.101 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
    9/15/14 8:01:28.668 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 8:01:53.596 AM WindowServer[95]: CGXGetConnectionProperty: Invalid connection 42003
    9/15/14 8:01:53.752 AM ocspd[84]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7fa6c9e102a0> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 8:01:53.954 AM com.apple.serveralertproxy[386]: ApplePushService: APSConnection being used without a delegate queue
    9/15/14 8:01:58.666 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 8:02:14.303 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
    9/15/14 8:02:28.669 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 8:02:58.697 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 8:03:10.186 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
    9/15/14 8:03:28.699 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 8:03:58.726 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
    9/15/14 8:04:06.022 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
    9/15/14 8:04:28.782 AM apsd[250]:  SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)

  • TS1702 Hello, we have a Mac and an ipad,the Mac is working and wifi is on and the Ipad's wifi is on too, but Ipad Safari can not open because it could not connect to the server, does any one know what have happened?

    Hello, we have a Mac and an ipad, the Mac is working and wifi is on and the ipad's wifi is on too, but Ipad Safari can not open the page because it could not connect to the server, does any one know that?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Essbase Administration Services "Can not Connect to Administration Server"

    Hi
    Here I am installed Oracle EPM 11.1.2.2 Essbase,Planning and Reporting and after sucessfull configuration. When I tried to open Essbase Administration Console and there is no option to open administration console and I opened the Hyperion extraction setup folder and I installed Essbase Administration Console setup manuallay and after sucessful installation I try to Open and when I create new server and ir=ts created and then I am trying to connect server its throw this error
    Error: Can not Connect to Administration Server
    Please give me possitive things.
    Thanks in advance..

    Did you deploy the web applications to one managed server in the configurator, if you did then EAS is probably running on port 9000 so you would need to enter the server in the EAS console as servername:9000
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How do i connect to sql server 2012 from cmd .

    Hi ,
    I Installed sql server 2008 R2 and 2012 Express and sql server2014 . I can conect to sql server 2008 R2 using
    SQLCMD -L command .
    How do i connect to sql server 2012 express edition from cmd .
    Any Hep appreciated
    Thanks in advance,
    Shravan

    I HAVE ANOTHER INSTANCE NAMED TEST  WHEN I USE THE COMMAND IT GIVES ME THIS ERROR 
    HOW TO RECTIFY 
    C:\Users\HP>SQLCMD -S HP-HP/TEST
    Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Named Pipes Provider: C
    ould not open a connection to SQL Server [67]. .
    Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Login timeout expired.
    Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : A network-related or in
    stance-specific error has occurred while establishing a connection to SQL Server
    . Server is not found or not accessible. Check if instance name is correct and i
    f SQL Server is configured to allow remote connections. For more information see
     SQL Server Books Online..
    PLZ HELP 

Maybe you are looking for

  • Photo Creation- successful install, will not run. Help

    Photo Creation- It said successful install, When I run it it goes to scree saying starting up and stays there It will not run. Can anyone help? Help

  • How to validate a text item/display item in Oracle forms 9i?

    Hello Everyone, I have a form in which we have to type in a product_id as shown below in the screenshot. And when we type in, it has to get validated. If it is valid then ok, else display a message saying not valid. How do we achieve it on a text box

  • I lost one of my "notes" and want to retrieve it?

    After my last sync, one of my "notes" within the notes category is now lost. I can't find it on iPhone or on my computer. Where do I look for it? Only one "note" appears to be lost while the others were updated and saved in Outlook as usual.

  • Moving Audio Clip less then 1 frame in Premiere

    Is it possible to move an audio clip less then one frame in premiere CS4.  I recorded and then remixed in Audition 3.  Live concert was also recorded in HDV on a Canon hv30.  I want to use the remixed audio with the video footage in place of the came

  • Is abap thread safe? Some question in Singleton pattern in ABAP

    Hi Grus, I have a very basic question but really make me headache... Recently I am learning the design pattern in ABAP and as you know in JAVA there is a key word "Synchronized" to keep thread safe. But in ABAP, I didn't find any key words like that.