Not encrypted dot1x packet syslog Alert - what is this?

Hi, I have a Cisco 877w at home which I just use with my laptop for the internet. Thing is I keep geting this alert on my syslof server, what is it? The MAC address is my laptop which is wirelessly connected.
May 9 19:48:20.265: *** Not encrypted dot1x packet from 0012.4d8f.170a has been discarded
May 9 19:49:05.253: *** Not encrypted dot1x packet from 0012.4d8f.170a has been discarded
May 9 19:49:50.252: *** Not encrypted dot1x packet from 0012.4d8f.170a has been discarded
May 9 19:50:35.510: *** Not encrypted dot1x packet from 0012.4d8f.170a has been discarded
May 9 19:51:20.214: *** Not encrypted dot1x packet from 0012.4d8f.170a has been discarded

Here is the configuration guide which will help you :
http://www.cisco.com/en/US/products/hw/routers/ps380/products_configuration_example09186a00808a8d80.shtml

Similar Messages

  • Not encrypted dot1x packet from 0012.f0b9.87c3 has been discarded

    I have a very basic config to setup wireless on on an 857W router.
    When I get connected the log fills up the the following message.
    Not encrypted dot1x packet from 0012.f0b9.87c3 has been discarded
    What is causing this?
    Config below
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Router
    boot-start-marker
    boot-end-marker
    no aaa new-model
    dot11 ssid TESTSSID_1
    vlan 10
    max-associations 10
    authentication open
    authentication key-management wpa
    wpa-psk ascii 0 mywpapskpwd
    dot11 ssid TESTSSID_2
    vlan 20
    max-associations 10
    authentication open
    authentication key-management wpa
    wpa-psk ascii 0 mytestpassword
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.100.1
    ip dhcp pool HOME_1
    network 192.168.100.0 255.255.255.0
    default-router 192.168.100.1
    ip dhcp pool HOME_2
    network 10.20.0.0 255.255.255.0
    default-router 10.20.0.3
    ip cef
    archive
    log config
    hidekeys
    bridge irb
    interface ATM0
    no ip address
    shutdown
    no atm ilmi-keepalive
    dsl operating-mode auto
    interface FastEthernet0
    interface FastEthernet1
    spanning-tree portfast
    interface FastEthernet2
    spanning-tree portfast
    interface FastEthernet3
    interface Dot11Radio0
    no ip address
    no ip route-cache cef
    no ip route-cache
    encryption vlan 10 mode ciphers tkip
    encryption vlan 20 mode ciphers tkip
    broadcast-key change 60
    ssid TESTSSID_1
    ssid TESTSSID_2
    speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
    channel 2452
    station-role root
    world-mode dot11d country GB both
    no cdp enable
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 spanning-disabled
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    interface Dot11Radio0.10
    encapsulation dot1Q 10 native
    no ip route-cache
    bridge-group 10
    bridge-group 10 subscriber-loop-control
    bridge-group 10 spanning-disabled
    bridge-group 10 block-unknown-source
    no bridge-group 10 source-learning
    no bridge-group 10 unicast-flooding
    interface Dot11Radio0.20
    encapsulation dot1Q 20
    no ip route-cache
    bridge-group 20
    bridge-group 20 subscriber-loop-control
    bridge-group 20 spanning-disabled
    bridge-group 20 block-unknown-source
    no bridge-group 20 source-learning
    no bridge-group 20 unicast-flooding
    interface Vlan1
    ip address 10.7.12.219 255.255.255.0
    interface Vlan10
    no ip address
    ip virtual-reassembly
    ip tcp adjust-mss 1400
    bridge-group 10
    hold-queue 100 out
    interface Vlan20
    no ip address
    ip virtual-reassembly
    ip tcp adjust-mss 1400
    bridge-group 20
    hold-queue 100 out
    interface BVI10
    ip address 192.168.100.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    interface BVI20
    ip address 10.20.0.3 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 10.7.12.254
    no ip http server
    no ip http secure-server
    control-plane
    bridge 10 protocol ieee
    bridge 10 route ip
    bridge 20 protocol ieee
    bridge 20 route ip
    line con 0
    no modem enable
    line aux 0
    line vty 0 4
    login
    scheduler max-task-time 5000
    end
    Router#

    Too funny... I get clients complain to me about issues and they have drivers that are from 2003 or 2004.
    Now all you have to do is make sure all other devices are on the same firmware. Makes troubleshooting sooooooo much easier.

  • "Not encrypted dot1x packet has been discarded"

    I've got Cisco 851 and Wireless client (notebook). I've created this config (see attachements), but receive the error (see attachements).
    Settings on the client:
    Security type: WPA-Personal
    Encryption type: TKIP
    And the same security key.
    What have I done wrong?

    Your configuration looks fine, and the log even states that your client associates. Do you maybe have a setting wrong on the laptop? Do you have access with it despite the error?

  • When I plug my iPod in my computer, "This iPod cannot be used because the Apple Mobile Device Service is not started" message pops up. What does this mean and how can I fix it?

    When I plug my iPod in my computer, "This iPod cannot be used because the Apple Mobile Device is not started" message pops up.  What does this mean and how can I fix it?

    Hello di_gitrdone,
    Start with this article describing how to restart this service.
    http://support.apple.com/kb/ts1567
    B-rock

  • TS3899 I have just set up my new iphone 5 from my 4.  My mail is not coming through and it keeps asking me for my Yahoo password which i am putting in and then it says operation could not be completed (MFMessgeErrorDomain error 1032) what does this mean

    Im having trouble setting up my mail.  I have just upgraded from a iphone 4 to 5.  mail keeps asking for my password when i put it in it comes up saying
    the operation could not be completed (MFMessageErrorDomain error 1032)
    what is this??

    Nice try! Take a hike.

  • I keep getting an error message that reads: Not enough storage This iphone cannot be backed up because there is not enough icloud storage available. What does this mean? How do I fix it?

    I keep getting an error message that reads: Not enough storage This iphone cannot be backed up because there is not enough icloud storage available. What does this mean? How do I fix it?

    Try doing a hard reset:
    Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    After that: go to Settings - iCloud - Storage and backup - turn off the iCloud backup
    and backup with iTunes from now on
    More info on backing up: http://support.apple.com/kb/ht1766
    Or, if you prefer to keep backing up with iCloud, check out this article, it will help you understand how to manage the iCloud storage:
    http://support.apple.com/kb/ht4847

  • An error...Exc in ev hand! oSAPlg.o.Root.log not a function....what is this

    an error...Exc in ev hand! oSAPlg.o.Root.log not a function....what is this
    While I am using the firefox site this error is coming up.
    What is it...I have never seen it before.
    Regards, Michael 0423 053 251

    Upgrade your browser to Firefox 9 and check
    * getfirefox.com

  • When I turned on my computer this morning it had a new noise coming from the top of the screen at the back.  Not loud but almost whirring.  What might this be ?

    When I turned on my computer this morning it had a new noise coming from the top of the screen at the back. 
    Not loud but almost whirring. 
    What might this be ?

    21.5 Mid 2010
    Processor  3.2 GHz Intel Core i3
    Memory  4 GB 1333 MHz DDR3
    Software  OS X 10.8.5 (12F37)
    I just found an answer ! 
    I had moved my computer into another room and had to turn up the brightness, as I have always had it on the lowest setting.  In doing so it created the noise, I turned it right down and it stopped.  I have now set it about level 3 so it's not so distracting.
    thanks

  • My General Usage says I have 627 mb in Messsages (saved).  I do not save any text mssgs.  What does this mean?  and if messages have been saved how do I delete them?

    my General Usage says I have 627 mb in Messsages (saved).  I do not save any text mssgs.  What does this mean?  and if messages have been saved how do I delete them?

    my General Usage says I have 627 mb in Messsages (saved).  I do not save any text mssgs.  What does this mean?  and if messages have been saved how do I delete them?

  • HT3819 I have turned Home Sharing on on two computers, but the "Shared" area is not appearing on either computer.  What does this mean?  What do I do?  THANKS!

    I have turned Home Sharing on for two computers, but the "Shared" area is not appearing on either computer.  What does this mean?  What do I do?  I am trying to get music from one library into another library to sync with my ipod so that I can have all songs on the ipod from both libraries. 
    Thank you for your help!

    If you have the horizontal menu bar showing (File, Edit, View,...), select View, then select Show Sidebar. 
    If the menu bar is not showing, dorp down the menu in the very upper left corner and select show menu bar, then follow steps above.
    Hope that helps.  Good luck.

  • Wi-Fi is turned on but is not connected to a network.  What does this mean?  How can I fix it?

    Wi-Fi is turned on but is not connected to a network. What does this mean?  How do I fix it?

    Hi, Kozou. Welcome to the forums!
    Connect your computer to the Express's Ethernet port and open AirPort Utility. Does this allow AirPort Utility to find your Express?
    If so, go through the setup process. After the Express restarts, disconnect it from the computer and connect it to your DSL, cable modem, or whatever provides your internet connection. Wait a minute or so. The light on the Express should turn green.
    Now tell your MBP to join the wireless network created by the Express. You can do this using the AirPort menu or the Network pane of System Preferences.
    Does this work?

  • I have just tried to sync my iphone. Error message saying it cannot be synced has popped up quoting error code (-50). I have just removed old iphone backups from itunes but was very careful to not delete the current one. What does this code mean?

    Hi there,
    I have just tried to sync my iphone.
    Worryingly an error message saying it cannot be synced has popped up quoting error code (-50)
    I have just removed old iphone backups from itunes but was very careful to not delete the current one
    What does this code mean?

    http://support.apple.com/kb/TS1583

  • TS4009 My Phone will not backup because there is not enough iCloud storage available.  What does this mean and how do I upgrade the phone?

    My Icloud will not backup on my iPhone.  What do I need to do about this?

    http://support.apple.com/kb/HT4859

  • File not found error 43 message. What is this?

    I transferred a project to a friends logic and everything transferred fine except for the fact that every time we start the tune we get the notification: File not found, result code = -43. After we click through the first error code window another pops up and it says: Fade update failed, (error -43).
    It is no big problem except for the fact that these come up every time we hit play. Then after we click through the error messages the song works perfectly.
    Any ideas?
    Thanks

    Hi,
    I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
    Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
    DS

  • "The device does not have necessary services"...what does this mean?

    I have been told this error happens because Verizon wants you to use data instead of wifi to browse your phone but as this is happening with a bluetooth connection that does not seem a likely answer unless Verizon is also not willing to let you use bluetooth to browse your phone. All I want to do is browse the files on my S4 Mini via bluetooth. That should not be asking too much... What is the real cause of this error and is there a fix or workaround? Thanks!

    hey man, i was getting the same message, with a MacPro 8-core and a MacbookPro, i did this...
    1. both has the BLUETOOTH Sharing ON and "Show Bluetooth Status in Bar" ON
    (my Require paring is off, don't know if it changes something)
    2.in bluetooth preferences, select the device (here MacbookPro) click below in the gear for options than "Configure this device”.
    3. when the "Bluetooth Device Set Up" show up, do not click on CONTINUE, instead click on the bluetooth button in menu bar, your device (here my mackbookpro) now has the option for SEND and BROWSE...
    Hope that work for you too...
    Sorry my poor english..

Maybe you are looking for