Not getting the image no in ipad

how can i transfer my image from my windows pc with the perticular iamage no. rite now i have transeferred all the images but the design no is not showing in my ipad ratina display.please help me for that
iPhone 4

Hi
Use function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
itab     type   table of alsmex_tabline
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       exporting
            filename                = p_infile
            i_begin_col             = '1'
            i_begin_row             = '1' "Do not require headings
            i_end_col               = '07'
            i_end_row               = '100'
       tables
            intern                  = itab
       exceptions
            inconsistent_parameters = 1
            upload_ole              = 2
            others                  = 3.
You get the data in ITAB row wise. So say if your 3rd row is blank there will not be entry in your ITAB.
While filling your final table based on ITAB you can esily identify the blank rows and append them where required.
Edited by: Vinit Joshi on Mar 7, 2012 11:28 AM
Edited by: Vinit Joshi on Mar 7, 2012 11:28 AM

Similar Messages

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

I have an iPad 2 and the newest apple tv. I do not get the option on my iPad to mirror on AirPlay. I've tried all the suggestions I've seen. Does anyone have a new idea?

I have an iPad 2 and the newest apple tv. I do not get the option to turn mirroring on in the AirPlay function. I have tried the suggestions I've seen on here so far, but nothing has worked. Has anyone come up with a fix to this problem?

Your Apple TV and iOS device (iPad) need to be on the same network subnet. If they are you can verify when playing that the ATV is set as the output device by clicking the icon to the the right of the fast-forwrd button. Or you can double-click the home button and swipe left twice to see this.

Why I can not get the image file of component?

Hello,
I tried to get an image file from the component. After I run the code below, there is not any new file created. Could you tell me what's wrong with it?
Rectangle d = this.getBounds();
BufferedImage bi = new BufferedImage(d.width, d.height, BufferedImage.TYPE_INT_RGB);
try {
ByteArrayOutputStream boutstream = new ByteArrayOutputStream();
// save it to file
FileOutputStream fimage = new FileOutputStream( new File( "image.png" ) );
boutstream.writeTo(fimage);
fimage.close();}
catch (Exception ev){
System.err.println("error making jpeg image: " + ev);
ev.printStackTrace();}

BufferedImage bi = new BufferedImage(d.width,d.height, BufferedImage.TYPE_INT_RGB);Straight after the above line you need to put this line:
d.paint(bi.getGraphics());
This is what was suggested to me in this thread(http://forum.java.sun.com/thread.jsp?forum=57&thread=369379) anyway, and it worked for me!

HT201471 i HAVE A LATE 2011 IPAD ◦A1395 on the iPad 2 (Wi-Fi) .I GOT APPLE TV FOR CHRISTMAS BUT CAN NOT GET THE ICON ON MY IPAD IS THERE A WAY OF DOING THIS

I got the new appl3 tv for christmas for itunes and mirroring etc .I have a problem trying to mirror from my Ipad as i cannot find the airplay icon .is there a easy soluation to this problem my Ipad model is
A1395 MODEL year 2011

http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
http://support.apple.com/kb/TS4215
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-Airplay-Icon-Missing. htm
http://appletv2.com/airplay-icon-missing-ios-7/
 Cheers, Tom

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

TS3988 I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem

I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem to be t

There are only two things that you must do to connect a device to calendars:
1) In settings>icloud, you must log in, WITH THE CORRECT ID/PASSWORD, and
2) Turn on calendars on the same page.
You said that the iphone 4 and ipad **used** to automatically sync. Do they no long sync?

HT201335 Hi. I have an apple tv and am able to mirror the image on my ipad to my tv, however it doesn't fill the full screen. Is there a way to get a full image on my 32" Tv. Thanks a lot for your help

HI.I have an apple TV and am able to mirror the image on my ipad onto the screen. However, it doesn't fill the full 32" screen. Is there some way to project a bigger image onto the Tv. Thanks for your help

Welcome to the Apple Community.
Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you.

I downloaded an app to a computer that is synced to my iphone. So I copied the app to my ipad synced computer, but it does not recognized the app. How can I get the app onto my ipad library?

I downloaded an app to a computer that is synced to my iphone. So I copied the app to my ipad synced computer, but it does not recognized the app. How can I get the app onto my ipad library?

Store>Check for Available Downloads

When I open iTunes and am also connected to my iPad, I do not get the screen where my device should be listed.

When I open my iTunes and am also connected to my iPad, I do not get the screen where I can select a device or choose the Summary tab. What am I doing wrong?

Hello Hegsted60,
Sorry to hear that your iPad is currently not recognized by iTunes. I found an article with steps you can take when you experience an issue like this. I wasn't sure whether you were using a Windows or Mac computer, so I included the respective articles for each:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thank you for using Apple Support Communities.
Best,
Sheila M.

I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?

I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?

You know that you have to connect the iPad to your PC with the cable that came with it - and then iTunes should start automatically and it will guide you through the set up process?
If you have already tried to connect the iPad - and you have launched iTunes - and you still have no luck - reboot your PC and then begin the process again.

I can not get the Icloud sign in page to load on my IPad or IPhone

I can not get the icloud sign in to load on my IPad on IPhone

You can't go to icloud.com using Safari on an iOS device, if that's what you're trying to do. You have to go there from your computer.

I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect

I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect it keeps saying choose a netwokand the IP Address it automaticaly puts in is wrong?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

HT4112 I can not get the 2003 Bluetooth wireless keyboard to pair with my ipad. How do I do this? According to the information above, this IS possible...

I can not get the 2003 Bluetooth wireless keyboard to pair with my ipad mini, 32gb wifi. How do I do this? According to the information above, this IS possible...

Never mind... Didn't see the "not compatible"... Stupid... It's bluetooth. Bluetooth apple should connect to bluetooth apple... Period...

Not getting the image no in ipad

Similar Messages

Maybe you are looking for