Not issue permits until wcd(work clearance document) is tagged(issue is related to wcm)

Hi All,
I got a requirement from my client that user is unable to issue permits utill wcd is tagged. kindly suggest how is it possible

Greetings Peter,
I believe your requirement is that:
no Approvals can be given on the WCA, until the WCD is in Tagged status ETG at least
(and can have the relevant Approval?)
To achieve this, you must define a Cross-Document Approval Process and an Approval Hierarchy.
Create an approval such as "Tagged" in IPMD and assign it to the WA and WD objects under SPRO > Plant Maintenance and Customer Service > Work Clearance Management > Approvals > Assign Approval
Create this Approval as "Mandatory", "Copy Automatically", "Issue Automatically" in IPMD.
Under same parent node, Define Hierarchy for Approvals in such a way that the other Approvals you want to grant after Tagging only have a hierarchy level higher than "Tagged".
Under same parent node, define Cross-document Approval Process, assigning the Approval "Tagged" to WA and WD, marking it as relevant to the process and set the process direction as going down from WA.
This should allow you to meet this requirement, I think.
You could also look at the node SPRO > Plant Maintenance and Customer Service > Work Clearance Management > Approvals > Block Issuing of Approvals > Define Dependent on System Status
but I think it does not check the status cross-document, which is what you require.
N.B. I think that actually if you have access to an IDES system, looking at the WCM setup for Plant 1000 there might be very helpful to you.
More useful info for you:
Work Clearance Management (PM-WCM) - SAP Library
Approvals - Work Clearance Management (PM-WCM) - SAP Library
Configurations necessary for WCM
I hope you do find this useful and come back with any further questions or issues.

Similar Messages

  • Untagging Phase missing in Operational Work Clearance document

    Hi ,
          I am not getting the Untagging phase in the Operational WCD ..
    I have assigned a usage to WCD and in that i have operational cycle selected in config and it is " Tagging Cycle with temporary untagging phase" .. here while trying the enhaced model .. everything is fine but i am not getting the Untagging option in the Switching scree of WCD .. , my WCD document status are PREP,PROC,UNT -Untaggable,ETUG - Temporarily Untagged ..and i am not able to get statusBUG-Untagg, EUG -Untagged status ..
    Please let me know where i am missing ..
    regrds
    pushpa

    Hi,
          The required untagging condition is already maintained in operational WCD for each technical object..
    Currently in my operational WCD a usage is assigned and this usage specification is Tagging Cycle with temporary untagging cycle .. so in my WCD in switching screen i am getting TAG,Tagged,Untag temporarily , temporarily untagged .. and once temporarily untagged is given then status is ETUG and again i am TAG , i am not getting UNTAG part here ...
    I did not have conflicts also .. please provide your inputs..
    regrds
    pushpa

  • Unistalled reinstalled and can not open gmail internet explorer works fine. Have had issues ever since beta new improved system work it out firefox or I am done !

    Ever since the beta systems, computer windows 7 is having issues online. Soon to delete completely and go back to internet explorer. Whats up?

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holidng the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Warning messages "You are not a receiver of the work item"...

    Hi Experts,
    We are facing an issue in which couple of users are getting warning messages "You are not a receiver of the work item" in there Portal Inbox. But they are not getting any warning message while accessing the same from R/3 inbox. We tried replicating the issue but it is working fine for us. Is it related to workitems which are of any particular type??? Kindly suggest.....
    Just to add some more thing we have gone through the Forum : UWL workitem error: you are not a receiver of the work item and also the OSS notes: 1133821, but we do not get any appropriate solution.
    Please suggest.
    Appreciate your quick response.
    Thanks,
    Harish
    Edited by: harish vyas on May 3, 2010 1:24 PM

    Hi Enrique,
    Yes users are using SSO.
    As suggested I have checked in transaction SU53 and there is no error message for the user i.e. we are getting success message as  "The last authorization check was successful".
    Please suggest what can I try.
    Also adding to this, Warning message which users are getting is not a show stopper i.e. they are able to process workitems successfully.
    Thanks,
    Harish

  • Attention: Currently we are experiencing intermittent update failures. We are aware of the issue and are actively working to resolve.

    Attention:
    Currently we are experiencing intermittent update failures. We are aware of  the issue and are actively working to resolve.

    Hello,
    This issue is resolved. "Local Upgrades are successfully restored as of Tuesday, January 18th 16:00 PST.
    Please contact Customer Support if you have any additional questions or concerns.
    Christopher C Smith
    CSE
    Cisco IronPort Customer Support 

  • There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents. Error message in PhotoShop CC

    Printing from PS CC worked fine today. I made no changes to preferences. In between working with 2 projects, the first one printed fine, the second gave me this Error Message.
    There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
    Now I've checked for updates for my printer, reset my printer, reset PS CC preferences, picked my printer as Default and Last Used, and rebooted. I've followed all the recommended fixes for this issue I could find here and on the internet. I can print fine from any other program. Alas, the error message keeps popping up and I can't print.
    PS CC is up to date
    Running OS 10.10.2
    HP Printer updated
    Help?

    Have you printed to this printer from 10.10 before?  If so, check your connections.

  • Working with documents via BEx Analyzer not using the portal

    Hello,
    i read that we are able to create (work) with documents (comments) via
    BEx Analyzer. When i want to add a comment how it is described in the
    help we get connected to the portal. We dont want to use the portal for
    that. Therefore we searched a way to skip the portal. We read that in
    BW Versions before 7.0 the portal was not connected but since 7.0 we
    have the portal connectivity, but it should also possible to not use
    the portal and to access directly the BI Server. I searched for the
    Customizing to do so but i could not find it where to switch to the old
    logic.
    And another question is when we use the Portal with the knowledge base . The documents are stored in the document framework (SKWF). Is it the same as the Datawarehousing Workbench --> documents. This storage we want to use.
    Can anyone give me a hint?
    Kind regards,
    Murat

    Hi Murat,
       We are also facing the same issue of when trying to create/access the documents from BEx analyzer it is connecting portal , we need to bypass portal and directly access the document browser in BW server.
      In your thread you mentioned it is done. So can you please let me know how did you enable the old configuration?. It will be very much helpful to us.
    Awaiting for your reply.
    Thanks,
    V.Senthilkumar

  • Work clearance management  tab not displaying

    Hi all,
    As per my knowledge under SAP menu under plant maintenance there comes a link for work clearance management after Information system.
    But its not showing in my  system.What could be the reason for it.
    I am attaching the screen shot of my system and other system taken by from my friend
    Thanks
    Vivek Varun

    Hi Vivek,
    This is add on component in SAP , need to activate the WCM component.It will not appear in the sap easy access screen until it is activated.
    Ask your basis team to activate the WCM component, then only you can see the WCM nodes.
    Transaction Code for activation of add on components in SAP is SFW5
    Best Regards
    Kalyan

  • G'day, i am trying to type into an adobe document using the typewriter function. However everytime after i type the text vanishes. It is almost as if the text is white and vanishes into the background. However this is not the case as the works are not vis

    G'day,
    I need some help, i am trying to type into an adobe document using the typewriter function.
    However every time after i type the text vanishes. It is almost as if the text is white and vanishes into the background.
    This is not the case as the works are not visible regardless of the background color.
    The text box remains available and can be edited if clicked on, also if i double click on it the typed words become visible and editable, however once i close the box i cannot see them on the screen.
    I would appreciate any help i can get, i cant seem to do anything using properties or view.
    Thanks 
    Tiernan

    Hi Sara,
    See response to your questions below:
    1.     Are you running into this issue in a specific PDF, or in all of them?
    A.     All of them
    2.     What version of Acrobat are you using (and, are you on Mac OS or Windows?).
    A.     Using Acrobat 10.0\Acrobat on Windows
    3.     If you look at the text properties on the Tools panel (under Format), what color is the text swatch?
    A.     Test swatch for the text is black
    4.     What happens if you change the text color?
    A.     Nothing.
    I look forward to hearing back from you.

  • My printer crashed mid printing photo.  Printer works OK in other apps.  Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any

    Ooops I put the lot in the strap line!
    My printer crashed mid printing photo.  Printer works OK in other apps.  Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
    I would be grateful for help!!  Obviously...

    Probably best to ask in Photoshop General Discussion
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

    I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

    Have you printed to this printer from 10.10 before?  If so, check your connections.

  • When working on document in numbers and saving it I then try to open on iPad. It is not syncing what do I have to do after using on Mac to then be able to upload on iPad.  I have set cloud up and it works with keynote

    When working on document in numbers and saving it I then try to open on iPad. It is not syncing what do I have to do after using on Mac to then be able to upload on iPad.  I have set cloud up and it works with keynote

    Welcome to the Apple Community.
    I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
    The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
    My syncs are immediate, I never get chance to see if it works in the background, sorry.

  • There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.

    I've never had this problem before. It only affects Photoshop CS6 and CS5 that I have installed. I'm running MAC OS 10.9.5
    I have three printers and HP and two Epsons, and I get this dialogue when trying to print from Photoshop CS6 or CS5.
    There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
    Other applications print fine on all three printers.  I tried deleting the Photoshop Prefs numerous times without results.
    Does anyone have an answer for this?
    Thanks.

    Have you printed to this printer from 10.10 before?  If so, check your connections.

  • Work Clearance Management  (WCM) not available with ECC 6.0

    Hi All,
    Work Clearance Management (WCM) is a part of SAP Plant Maintenance (PM). It is a standard functionality. This is not available with our installed version of ECC 6.0 system.
    The navigation should be
    SAP Easy Access > Logistics > Plant Maintenance > Work Clearance Management.
    This is also not available on SPRO.
    But whenever we directly enter the T Code related to WCM, it allows me to go to that screen. But if we want to customize the WCM using the same method then the SAP standard configuration is missing.
    I need to get this functionality available on our system.
    Is it a part of SAP software component SAP_APPL ?
    But how do I get this ?
    Can anyone pls help me on this ?
    Thanks and warm regards
    Purnendu

    I think that WCM it's present as an extension set (i'm not quite sure if is EA-PLM or EA-SCM). When you configure it, the activities related in custominizg, will appear as well.
    Hope this help
    Ezequiel

  • Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

    Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

    Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.

Maybe you are looking for