Not run script in policy

hi i have a bach file run .bat
this is in network \\dc\data
but wen run this file of this way , not run
i must map this way and run it to correct
now i create setup.bat and it whole
======
net use t: \\ dc\data
t:
call run .bat
====
when run setup.bat, map t, and run corect
now i create a policy and in script shutdown place the file setup.bat
but when shutdown pc,the shut down is very time and script not run
of corce a later 6 moon befor update windows , this policy work ok
ploease help me

no body to help me

Similar Messages

Cron job not running - script uses rsync, ssh (with id_rsa)

Does anyone know how to get cron to run a rsync/ssh script which uses id_rsa for passwordless logins?
I have a backup script I have slaved for months over that works wonderfully when running it from the command line.
It uses rsync and connects with SSH (passwordless using ssh keys). I have setup id_rsa and id_rsa.pub for passwordless logins (this is my user account, and connects using root@ to the server)
As stated all works find when run from the command line. But when I setup a cron job to run this file (exact same line I run from the command line) it does not execute. Actually, it does run, as I have an email notifiction which sends to me. It is just the rsync/ssh part that does not run.
I have spent days and days trying to figure it out. No error messages occur, nothing. Took me a while to find out cron is emailing the user account on Lion the messages (not to a proper email address).
The error shows a permission denied, which I believe to be the cron user cannot use the id_rsa/ssh connection.
Cron is running the script as my user, the same I use on the command line. I even tried copying the id_rsa to the root user .ssh folder in case cron is running as root but that does not work either.
So does anyone know how to get cron to run this rsync/ssh script which used id_rsa for passwordless logins?
Thanks a lot

YES! Got it working, finally!
So the issue is indeed cron/launchd not being able to access the ssh-agent which holds the key.
So this is the solution...
Download keychain for Mac:
http://www.funtoo.org/wiki/Keychain
Then once its installed and configured, the script to run needs this added to the top:
eval `keychain --noask --eval id_rsa` || exit 1
Note I am using id_rsa whereas keychains instructions refer to id_dsa so I just changed it and it works OK.
When the script runs the first time it asks for the key password. Then it works from then on.
What I do not know yet is will I need to re-enter the password when I logoff/logon again. That will cause an issue as I auto restart the Mac every day which means if I am off for a few days backup will stop (can you see the madness in this issue!).

Data Manager not running scripts

Dear Experts,
I've followed one of the "How to pass parameters to BPC scripts" guide and created a Process Chain to run scripts. The whole thing didn't go as smooth as expected and I'm not sure which part went wrong.
As I'm having trouble validating the complex version of codes. I wrote something very simple instead like
*XDIM_MEMBERSET AcctDetail=Non_AcctDetailInput
*WHEN ACCOUNTPLAN
*IS "SSVV060"
*REC(EXPRESSION=%VALUE%,P_DataSrc="INPUT")
*ENDWHEN
*COMMIT
I ran the package, the package should trigger the process chain. but it never showed itself in the package status like it's never ran once at all.
I'm posting my script problem on another thread.
anyone has an idea? Thanks a million...
, Jim Hsu

Please check your task profile....
Make sure you have all task profile related to data manager....do let us know if youstill face this problem

SQL Agent not running Script in Package which calls an Excel containing Macro

I have a script task in SSIS package which calls Excel VBA file containing Macro, this file is on the local drive, when I run this package through SSDT the package works ok and the macro does what it needs to. However when I set up a
sql agent job to call the package then it fails at the Script task. I have created a credentials and proxy user as my self so I should Have full rights.
But it fails through the job and not through SSDT, can you advise ?

Hi Asad,
Since the error message “Script Task Run Excel: Error: Exception has been thrown by the target of an invocation” is too generic, we should find a way to return full error details from SQL Server Agent job. Firstly, configure logging for the steps you wish
to keep log data for. Secondly, create a stored procedure to return details of the step at which a job failed based on the job name. Finally, execute the stored procedure. For more details, please refer to the following blog:
http://www.sqlservercentral.com/articles/SQL+Server+Agent/67726/
In addition, the following similar two threads are for your references:
http://sornanara.blogspot.jp/2014/04/code-0x00000001-exception-has-been.html
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/4a20219e-4a90-41be-acfe-b8846dc2c38a/error-while-executing-a-ssis-package-which-contains-a-script-task-through-sql-server-agent-job?forum=sqlintegrationservices
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Lightroom 5.3 / Win7 x 64 - Could not run script LibraryFactory.lua

Hi
I'm after some help. I'm getting the above message when loading Lightroom. Been a user since version 3 and upgraded to 4 5 etc. Never had an issue like this and I don't know whwre to start concerning resolving it.
Please help
Apologies for the quality of the photo. This comes up twice and you click ok. Lightroom does actually load but I have no access to my library.
Kind Regards
Dan

I also tried updating Apple Softe ware from All Programs and that fails with a different error, it downloads but fails on install.
What error message do you get with that one? (Precise text please.)

Shell scripts do not run anymore; problems after 10.7.3?

Hello all,
latley all my shell scripts broke and they do not run anymore. I suspect 10.7.3 to broke all the scripts. My scripts used to work fine and I had no issues. I guess it started after updateing to 10.7.3 and now I got a error as following:
-bash: ./CamSendEmail.sh: /bin/bash: bad interpreter: Operation not permitted
This is usually as the first line in my script is and ever was #!/bin/bash. If I do just remove the line, I am getting an error as following:
-bash: ./CamSendEmail.sh: Operation not permitted
Please note, that the scripts name is "CamSendEmail.sh" and that this is just an example. All my scripts are affected. At this point I need to say again, that the scripts work basicly fine till a short time ago.
Of cause, the user who runs the scripts has the permission to run the script. It is a standard user and it ever was. I did not touch the scripts nor their permissions. The only change I am aware of is updating to 10.7.3.
I did a test and cut'n'pasted the entire content of a not running script into a blank new file. The new file did work! The only differences between those 2 files are now some file system permission, I do actually not know yet:
-rwxr--r--+ 1 james staff 265 Feb 13 19:50 CamSendEmail.sh
-rwxr--r--@ 1 james staff 265 Feb 13 19:40 CamSendEmail.sh.orig
Note, that *orig does not work, while *sh does. I could not find an information about the meaning of a + and the @ in the output of ls -al. But whatever it is, I wonder how this can be influenced by 10.7.3 ...(?) Can anyone shade a little light on that?
I will keep on searching for information about + an @, but since this is somehow urgent to me, I decided to first start this posting ...
Thx for your help on that!

I did some research and learned the the + and the @ are indicating extented attributes which can be managed using the xattr command. I played a little bit with it, and found out that my scripts had the following extended attribute for some reason
com.apple.quarantine
I deleted it using xattr -d com.apple.quarantine script.sh and the script worked again. This is one point.
What still drives me nuts, is the fact that this attribute was set without any interaction of me. Does anyone know if Apple has build in some new security stuff with 10.7.3? Or is this just accidential and some other action, which I am not aware of, has changed or added the extended attributes?
I realy would like to have that clarified. My scripts are part of an automated process and it took some days till I noted that this process does not work anymore, which resulted in data loss. I was happy that those days data was not very important. Now I am afraid that this may happen again any time :-(
Thx again!

How to launch and run script against safari using selenium webdriver

I am trying to launch and run my selenium webdriver script using safari but its launching safari but not running script. Its throwing belwo error message..
org.openqa.selenium.remote.UnreachableBrowserException: Failed to connect to SafariDriver after 50052 ms
Build info: version: '2.33.0', revision: '4e90c97', time: '2013-05-22 15:33:32'
System info: os.name: 'Windows 7', os.arch: 'amd64', os.version: '6.1', java.version: '1.7.0_25'
Driver info: driver.version: SafariDriver
    at org.openqa.selenium.safari.SafariDriverCommandExecutor.start(SafariDriverComman dExecutor.java:113)
    at org.openqa.selenium.safari.SafariDriver.startClient(SafariDriver.java:112)
    at org.openqa.selenium.remote.RemoteWebDriver.<init>(RemoteWebDriver.java:110)
    at org.openqa.selenium.remote.RemoteWebDriver.<init>(RemoteWebDriver.java:115)
    at org.openqa.selenium.safari.SafariDriver.<init>(SafariDriver.java:83)
    at org.openqa.selenium.safari.SafariDriver.<init>(SafariDriver.java:73)
    at LinkText.setUp(LinkText.java:38)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.jav a:47)
    at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java :12)
    at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java: 44)
    at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:24)
    at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:27)
    at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:271)
    at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:7 0)
    at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:5 0)
    at org.junit.runners.ParentRunner$3.run(ParentRunner.java:238)
    at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:63)
    at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:236)
    at org.junit.runners.ParentRunner.access$000(ParentRunner.java:53)
    at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:229)
    at org.junit.runners.ParentRunner.run(ParentRunner.java:309)
    at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestRefere nce.java:50)
    at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
    at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunne r.java:467)
    at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunne r.java:683)
    at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.jav a:390)
    at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.ja va:197)

Hey Reese
You bailed me out, dude! Apparently, my difficulties stemmed from me trying to directly edit /var/cron/tabs/root with pico. Never seemed to bother the other stuff, but it did this time. I am totally inept with vi, the default editor for crontab -e, which is why I had cheated before, and directly edited the /var/cron/tabs/root, el.al., so I had to find out how to
export EDITOR='pico'
in my .bashrc
After having done that, no problem, except for a latent programming logic bug that has reared its ugly head (my script is doing some date manipulation with today's and yesterday's date, and my script crashed and burned on the month change and with stuff related to single-digit date sequence numbers <10).
But, hey, I learned how to reset my default editor, so as to make life easier for me when it comes time to dorking with crontab files, and I learned that when the crontab file says "DO NOT EDIT THIS FILE - edit the master and reinstall," it means it!
Thanx for the troubleshooting hint.

Can Firefox NOT run ads? It slows everything down on my old laptop. This feature used to be an option.

When opening a we page, several active ads start execution, and the response to mouse clicks and arrow movements is severely attenuated. Firefox of old had an option to not run scripts, I think more than once, and this would give my old slower CP a break and allow useful controls again. Possible to re-implement?? I hope??

AdblockPlus <br />
https://addons.mozilla.org/firefox/1865/ <br />
Also, read this: <br />
http://adblockplus.org/en/getting_started

Group Policy Startup Script Applies My Policy But Does Not Run The Acual Scripts

I have created a basic batch file with msiexec.exe to uninstall a program on startup and then another separate .bat script to install the same program but the newer version. The software I'm referring to has to be completely uninstalled BEFORE
I install the "newer" version of the same program, it cannot just be overwritten. If I run a gpupdate /force on the client computer and restart, the scripts run as they are supposed to and everything works but the problem is that I can't get it to
run on first boot on a computer that has been turned off for months, even after multiple reboots it still doesn't run the scripts. The 3 policies apply to the different computers/users but the scripts don't run. I manage a theme park that is
only open 4 months of the year so the rest of the time the in park PC's are turned off. I have created my OU as "POS Computers & Users" which has all of the computers and users that will take this policy. I also have 3 Group Policy
Objects attached to this OU in Group Policy, 1 is the program uninstallation .bat script policy that runs on startup, 2 is the install .bat script policy that runs after the uninstallation script, and 3 is the Default Policy for the OU. I already have the
"Always wait for the network at computer startup and logon", "Run startup scripts visible"enabled, "Run startup scripts asynchronously" disabled, and "Run Logon Scripts Synchronously" enabled for all 3 of the
policies. They are all "link enabled" and security filtering is set to only the OU I mentioned earlier so that it doesn't affect anyone else. I have the link order set as the script I want to run first as the last and the one I want to run last first
because from what I understand inheritance is from bottom to top. The install file is accessible by everyone with full permissions on our "Shared" drive so I know its not a permissions issue because it runs after a gpupdate /force with a restart.
The scripts are in the proper folder for the policies they are attached to and permissions are fine.
Here is my uninstall .bat script (msiexec.exe /X{14324A6A-BDD1-4F40-8E77-664C8AEEA251} /forcerestart /qb-! ALLUSERS=1 REMOVE=ALL)
Here is my install .bat script (msiexec.exe /i {\\kksrvad\shared\Gatemaster\NewGatemaster.msi} /qb ALLUSERS=1)

Can't be done in a login script.
This is a Group Policy issue and not a scripting issue. You do not have a script. You have a command saved in a batch file and you are using a GPO. Not a scripting issue.
¯\_(ツ)_/¯

VB startup script not running on Win7

Hi,
my startup VB script not working on Windows 7. The script should install or uninstall office 2010 based on group membership.
I tested scipt on Windows XP and everything works. When I run script manually, it works.
Quite similiar batch file works, office are installed but not same functionality for me.
I turn UAC off, bot not working.. Also add dword EnableLinkedConnections but nothing change.
Batch file works but VBScript not!
Any advice? Thx

Hi Tomas Cink,
Based on my understanding, the start VB script which is deployed via GPO could not works fine on Windows 7 clients, although it can works fine on Windows XP clients and it can
run sucessfully if manually. Right?
Firstly, please run the following command on the problematic workstation.
Gpresult /h > C:\temp\gpresult.html (“C:\temp\” is the path of the gpresult.html, you can set it by yourself)
This file is used for checking the result of Group Policy information. Open the file to check if the GPO has applied.
If the GPO has applied, please follow the following step to narrow down the issue:
Change the script to the following command: add > %SystemDrive%\Users\test.txt
to the script.
Log on to a client with a regular user account, run
gpupdate/force, and then re-log on to this client.
Check if the test.txt file exists in this location
%SystemDrive%\Users.
If the
test.txt file exists, the GPO with startup script is applied successfully. But the result of running logon script achieves the goal we excepted or not which is still not sure.
Regards,
Lany Zhang

Gpo computer startup scripts not running

Hi,
I´m making some test with a windows 7 pro 64 bit computer and a 2008 r2 domain controller where I have created a computer startup script. I give you more info:
Domain functional level: 2008 R2
DC: 2008 R2
Client: Windows 7 pro x64
Gpo: Computer configuration -> Windows configuration -> Script -> Startup
Type of script: bat file copied on \\domain_name\SysVol\domain_name\Policies\{461E688A-E8F8-4C9B-8419-FE83DCDD4C26}\Machine\Scripts\Startup
The windows 7 machine is full updated, windows firewall disabled, uac disabled, windows defender disabled.
The bat file works and the gpo is applying, i have seen it via gpresult, another gpo which is in a top level works fine.
I need some help please, because I don´t know what to try.
Thanks in advance.

Hello Egoitz28,
Do you mean that you add the bat file in the startup group policy and gpresult shows that it is applied, but the bat is not run?
Please share us the bat file to test.
Logon/Logoff scripts could only be applied to users, whereas Start-up/Shutdown scripts applies to computers.
I create a test.bat start %windir%\system32\notepad.exe, and add it to the User Configuration->Policies->windows Settings->Scripts->Logon in the Default domain policy. And it works.
If I create in the startup policy in Computer configuration, I can see it in the gpresult, but it doesn’t work.
Please test if the bat works in the Logon policy.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Firefox is taking a long time to open. When it does open, I get a pop up box with "Script not running". Bookmarks on my tool bar don't load. Scrolling is unreliable--it will stop in the middle of a page

What is causing the "script not running"? Why so long to open? Etc.

Hi Donekes,
First off I need a little more information to help with troubleshooting. You say that an error occurs when you "try to re-open the same problem app before the old session completely exits". Does the error have an error code or dialog display? It may also be possible to receive an error log. Here is a knowledge base that explains how to retrieve error logs.
http://digital.ni.com/public.nsf/websearch/54E361E3FF477EC186256C320068184F?OpenDocument
If you are able to get that information then please post. Have a good day.
Brian K.

Run Script action not working when verifying bundle

I have a critical "Run Script" action in a bundle. When verifying the bundle, the script doesn't seem to run and the verify action hangs indefinitely.
I see the following lines in the ZCM Log:
Code:
[DEBUG] [07/21/2011 19:05:48.670] [5880] [runscriptenf] [1] [TeachGH] [Run Script Action] [] [Found script engine cmd.exe. Not using it since cmd.exe does not take parameters.] [] []
[DEBUG] [07/21/2011 19:05:58.311] [5880] [runscriptenf] [1] [TeachGH] [Run Script Action] [] [Run Script Action - Ended - 7:05:58 PM] [] []
nothing else is logged after those 2 lines. It seems like ZCM decides not to run the script for some reason, but is still waiting for it to complete? Or is it possible that it has moved onto the next action, but it is hanging there and not reporting it to the log?
I have no time to troubleshoot right now, will do so in depth tomorrow. Just wanted to get this posted in case anybody has a clue.

Nevermind, the next action is running, and that is what is hanging, which I doubt is Zenworks fault... Time for some more troubleshooting.

Have terminal NOT run a script when it loads

I recently wrote a basic shell script and saved it as a .command file to run from the desktop. Since then, whenever I open the terminal it automatically runs the script then exits the terminal. If I hide the file (mv pt-noplugs.command .ptnoplugs.command) it simply opens the terminal and closes it immediately. I have tried changing the default shell from bash to something else but this doesn't seem to make a difference. I also don't seem to have a .bashrc file when it normally is /home/user/.bashrc (I'm used to linux). Any help would be appreciated. Below is the script:
# Shell Script to start Pro Tools HD with no waveshell Plug-In
echo "*"
echo "* Script: pt-noplugs.command"
echo "* Please Leave This Window Open Until ProTools Has Exited"
echo "*"
# Move waveshell Plug-In Files to Plug-Ins (Unused)
cd "/Library/Application Support/Digidesign/Plug-Ins/"
mv -v Waveshell-DAE_5.9.1.dpm "../Plug-Ins (Unused)"
# Start Pro-Tools
/Applications/Digidesign/Pro\ Tools/Pro\ Tools\ HD.app/Contents/MacOS/Pro\ Tools\ HD
# Restore Plug-Ins directory
cd "../Plug-Ins (Unused)"
mv Waveshell-DAE_5.9.1.dpm ../Plug-Ins
echo "*"
echo "* Thank You. This Window May Now Be Closed"
echo "*"
exit

I forgot to add: when I login as a different user and load terminal is does NOT run the script mentioned before.

Script populate parent-child hierarchy not running

Hallo guys
I have problem when running script populate Parent-Child Relationship Table.
Here is the script.I don't even change the script.just run it in PL/SQL
declare
v_max_depth integer;
v_stmt varchar2(32000);
i integer;
begin
select max(level) into v_max_depth
from V_D_BRANCH
connect by prior BRANCH_KEY=PARENT_BRANCH_KEY
start with PARENT_BRANCH_KEY is null;
v_stmt := 'insert into DM_ANALYTICS.BRANCH_HIERARCHY (MEMBER_KEY, ANCESTOR_KEY, DISTANCE, IS_LEAF)
            select BRANCH_KEY as member_key, null, null, 0 from V_D_BRANCH where PARENT_BRANCH_KEY is null
            union all
            select member_key,
            replace(replace(ancestor_key,''\p'', ''|''), ''\'', ''\'') as ancestor_key,
            case when depth is null then 0
            else max(depth) over (partition by member_key) - depth + 1
            end as distance, is_leaf
from
select member_key,depth,
case     when depth is null then '' || member_key
when instr(hier_path, ''|'', 1, depth + 1) = 0 then null
   else substr(hier_path, instr(hier_path, ''|'', 1, depth) + 1, instr(hier_path, ''|'', 1, depth + 1) - instr(hier_path, ''|'', 1, depth) - 1)
end ancestor_key,
is_leaf
from
    (    select BRANCH_KEY as member_key, PARENT_BRANCH_KEY as ancestor_key, sys_connect_by_path(replace(replace(BRANCH_KEY, ''\'', ''\''), ''|'', ''\p''), ''|'') as hier_path,
      case when BRANCH_KEY in (select PARENT_BRANCH_KEY from V_D_BRANCH ) then 0 else 1 end as IS_LEAF
from V_D_BRANCH
connect by prior BRANCH_KEY = PARENT_BRANCH_KEY
start with PARENT_BRANCH_KEY is null
( select null as depth from dual;
for i in 1..v_max_depth - 1 loop
v_stmt := v_stmt || union all select '' || i || '' from dual;
end loop;
v_stmt := v_stmt || ) )
where ancestor_key is not null;
execute immediate v_stmt;
end;
but I got errors like following:
Error report -
ORA-06550: line 19, column 12:
PLS-00103: Encountered the symbol "insert into DM_ANALYTICS.BRANCH_HIERARCHY (MEMBER_KEY, ANCESTOR_" when expecting one of the following:
   ( - + case mod new not null <an identifier>
   <a double-quoted delimited-identifier> <a bind variable>
   continue avg count current exists max min prior sql stddev
   sum variance execute forall merge time timestamp interval
   date <a string literal with character set specification>
   <a number> <a single-quoted SQL string> pipe
   <an alternatively-quoted string
06550. 00000 - "line %s, column %s:\n%s"
*Cause:    Usually a PL/SQL compilation error.
*Action:
what should I do guys?any idea,any solution would be appreciated.thanks alot guys

956850 wrote:
hi,
i tried making "Dimension with Parent-Child Hierarchy" as described in your tutorials.
i finished with the admin tool and database changes and with no errors.
when trying to create a new answer, by only puting the hierarchy column in the answer.
the result show "no result" exist.
i am not sure what i am doing wrong. maybe you can point me to the problem?
thanks
Mirit.Hi Mirit,
What is the table that you created hierarchy on?
Which column in the hierarchy you pulled into your reports to see the No Result message?
Please query the table and see if has data.
Thanks,
G. SK

Not run script in policy

Similar Messages

Maybe you are looking for