Run Script action not working when verifying bundle

I have a critical "Run Script" action in a bundle. When verifying the bundle, the script doesn't seem to run and the verify action hangs indefinitely.
I see the following lines in the ZCM Log:
Code:
[DEBUG] [07/21/2011 19:05:48.670] [5880] [runscriptenf] [1] [TeachGH] [Run Script Action] [] [Found script engine cmd.exe. Not using it since cmd.exe does not take parameters.] [] []
[DEBUG] [07/21/2011 19:05:58.311] [5880] [runscriptenf] [1] [TeachGH] [Run Script Action] [] [Run Script Action - Ended - 7:05:58 PM] [] []
nothing else is logged after those 2 lines. It seems like ZCM decides not to run the script for some reason, but is still waiting for it to complete? Or is it possible that it has moved onto the next action, but it is hanging there and not reporting it to the log?
I have no time to troubleshoot right now, will do so in depth tomorrow. Just wanted to get this posted in case anybody has a clue.

Nevermind, the next action is running, and that is what is hanging, which I doubt is Zenworks fault... Time for some more troubleshooting.

Similar Messages

Actions not working when bitmaps added to scene

I've been trying to work around this issue for the last few
hours. In my document I have a bitmap background, and a few other
bitmaps I exported from Photoshop. Whenever I try to assign actions
to buttons, it says the selection cannot have actions assigned.
However, when I make a new document, and make a button from native
tools in Flash (text, create rectangle), actions can be assigned.
Has anyone else had this problem, and know how to fix
it?

yep, yep for certain kg, however jagreff, the best place for
you code is on the timeline anyway. Just target the symbol instance
name and add your code there, usually creating a separate 'actions'
layer is preferable to organize your code in one location. things
are a little different from the timeline, for instance to use a
buttons on handler use code like:
my_btn.onPress = function() {
gotoAndStop('_down');
}

I am trying to reinstall Flash CS4 professional as the action script is not working but now I am getting an error: 2 message when I use the original CD to try and reinstall

I can't get the original disk to work on a reinstall. I get the message
AdobeColorCommonSetRGB
Error:
Error 2.
I teach a class using this program on Macintosh computers running 10.9.5 and the action script is not working. It will work on any program designed using the 10.8 but if you design any animation on 10.9.5 the action script will not work for the buttons

You would have to manually delete the color profiles in question... Run the cleaner tool and see if it gets you started.
http://www.adobe.com/support/contact/cscleanertool.html
Mylenium

The Horizontal & vertical scroll is not visible or not working when i run the form in Forms 6i.

Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
In this form , there are 5 canvas namely
CANVAS2 - Stacked Canvas
PASS - Content Canvas
MAT_RATES - Content Canvas
DATE - Content Canvas
PREVIOUS - Content Canvas
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.

Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid

Action Script Link NOT WORKING

This is odd and I hope someone can provide me with an answer.
I am using actionscript within my flash file to open other HTML
file within my site. I have done this many times and have never had
a problem. Now, my actionscript links work on my server when I am
viewing my live site, but the actionscript will not work when
running my site from my C Drive. Has anyone had this issue or have
an answer on how to fix it? Maybe I need to change an IE 6
setting.

Hi chinkle, can you post your code please.
To simply open an external Link from Flash, should work
locally too. Even if you are not connected to the Internet, your
Browser should still open.

Flash catalyst cs5.5 not working when i run the project

when i ran prodjects in flash catalyst cs5 it came up as a webpage that could scroll, now in cs5.5 when i run the prodject it cannot scroll and it doesn't scroll when you export for web servers, help much apreciated.

Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

Multitouch on track pad not working when running Windows 8 in boot camp

Does anyone know a work around on how to resolve the issue of more than one fingers on the trackpad? For example, I use one finger to click a window then another finger to slide/move the window to a different location on the screen. This does not work when running Windows 8 in Boot Camp latest version. Any suggestion is much appreciated.

very very few gestures are supported in windows
https://discussions.apple.com/message/24548533#24548533
if it's a limitation from ms you need to contact them
if it's a limitation from apples drivers you can use feedback channel
http://www.apple.com/feedback/

Hyperlink is not working when running on sun solaris OS

Hi,
I have Created PDF file using oracle reports 2.5 version and included hyperlinks in reports which will open files located on our intranet server(http://cup2.ngc.co.uk). Hyperlinks are working properly when I generated report on window xp machine but not working when I compiled and executed report on solaris unix server(reports 6i).
please let me know why hyperlinks is not working when executed on solaris((5.8). do we need any setup to work hyperlinks on unix server.
Thanks in advance,

Ok, there are 2 docs i've tried.
A = Doc created originally from MPB Pages with hyperlink
B = Doc created from iPad Pages with hyperlink
A was transfered to iPad Pages using iTune. I emailed A as pdf from iPad to gmail and reopen the file on iPad using Quickoffice / PDF Reader Lite, the link is NOT active, not working. BUT, when i read A using MBP gmail, the link is ACTIVE, i click on the link and it brings me to the correct webpage.
As for B, after the page was created with links on iPad, i emailed B as pdf from iPad to gmail, reopen the file on iPad using Quickoffice / PDF Reader Lite, the link is NOT active, and this time, when i read B using MBP gmail, the link is NOT active as well.
Weird huh? I'm starting to sense that is the problem with iPad Pages. What say you?

Email Notification Script is Not Working in Windows Server 2012..

Dears
I have Server 2012 and I wants to make new task seclude for email notification, while any user is login to the
server the server will send notification email about user name and IP address for the user, I have script it is working fine in windows 2008 and it is xml file, but the script is not working in 2012 because in task schedule in windows 2008 there is an option
called send email but in windows 2012 this option is deprecated, I’m using start program to run the script in PowerShell instead of send email and I configured as an
end-MailMessage
-From [email protected]
-Subject "Email Notification"
-To [email protected]
-SmtpServer mail.domainName.com
But when I use this PowerShell I only receive email notification without any name and IP address, kindly I need
your support and help, I’m using below script.
<?xml version="1.0" encoding="UTF-16"?>
< Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-11-27T11:16:32.3962177</Date>
<Author>Company Name\User Name</Author>
<Description>RDP Login V1</Description>
</RegistrationInfo>
<Triggers>
<EventTrigger>
<Enabled>true</Enabled>
<Subscription><QueryList><Query Id="0" Path="Security"><Select Path="Security">*[System[(EventID=4624)]] and *[EventData[Data[@Name='LogonType'] and (Data=10)]]</Select></Query></QueryList></Subscription>
<ValueQueries>
<Value name="IpAddress">Event/EventData/Data[@Name="IpAddress"]</Value>
<Value name="TargetUserName">Event/EventData/Data[@Name="TargetUserName"]</Value>
</ValueQueries>
</EventTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>Company Name\User Name</UserId>
<LogonType>Password</LogonType>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<SendEmail>
<Server>Name of the Server.com</Server>
<Subject>RDP Login V1</Subject>
<To>Sender Name</To>
<From>Any Email.com</From>
<Body>Login Alert on ServerName IP : $(IpAddress) User: $(TargetUserName). Please take necessary action</Body>
<HeaderFields />
</SendEmail>
</Actions>
< /Task>

Dears
I have Server 2012 and I wants to make new task seclude for email notification, while any user is login to the
server the server will send notification email about user name and IP address for the user, I have script it is working fine in windows 2008 and it is xml file, but the script is not working in 2012 because in task schedule in windows 2008 there is an option
called send email but in windows 2012 this option is deprecated, I’m using start program to run the script in PowerShell instead of send email and I configured as an
end-MailMessage
-From [email protected]
-Subject "Email Notification"
-To [email protected]
-SmtpServer mail.domainName.com
But when I use this PowerShell I only receive email notification without any name and IP address, kindly I need
your support and help, I’m using below script.
<?xml version="1.0" encoding="UTF-16"?>
< Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-11-27T11:16:32.3962177</Date>
<Author>Company Name\User Name</Author>
<Description>RDP Login V1</Description>
</RegistrationInfo>
<Triggers>
<EventTrigger>
<Enabled>true</Enabled>
<Subscription><QueryList><Query Id="0" Path="Security"><Select Path="Security">*[System[(EventID=4624)]] and *[EventData[Data[@Name='LogonType'] and (Data=10)]]</Select></Query></QueryList></Subscription>
<ValueQueries>
<Value name="IpAddress">Event/EventData/Data[@Name="IpAddress"]</Value>
<Value name="TargetUserName">Event/EventData/Data[@Name="TargetUserName"]</Value>
</ValueQueries>
</EventTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>Company Name\User Name</UserId>
<LogonType>Password</LogonType>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<SendEmail>
<Server>Name of the Server.com</Server>
<Subject>RDP Login V1</Subject>
<To>Sender Name</To>
<From>Any Email.com</From>
<Body>Login Alert on ServerName IP : $(IpAddress) User: $(TargetUserName). Please take necessary action</Body>
<HeaderFields />
</SendEmail>
</Actions>
< /Task>

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Form in Dynamic page not working when checkbox is used.

I have created a form using dynamic page. The form most have display fields and a checkbox field. When I check a box, it assigns 'Y' value and when unclick, it assign 'N' to the database field.
When I submit the form, the procedure which is supposed to save the form data never gets executed. Well, at least it says, page not found HTTP 404 error.
Interestingly if I make this field a text box and manually enter 'Y' or 'N', and then submit the form, the procedure is executed. Data gets saved.
Is the checkbox not supposed to be used for a database field because checkbox value can be assigned only using javascript and the procedure never get that value ?
Can you please tell me how to use a checkbox for a database field using dynamic page ?
thanks,
Mainak

Sharmila,
When I said, the form does not get submitted, I meant that the procedure does not work. The form gets submitted but the procedure does not work. It gives HTTP 404 error. That is what perplexes me. I am unable to understand why the procedure does not work when I click a checkbox.
May be you can make this work. I am hopeless about this.
Here is the code for the procedure sumbit_form:
NOTE: I ADDED TWO FIELDS CALLED PROMOT VARCHAR2(1), PROMOTID NUMBER(4) TO THE EMP TABLE AND CREATED A NEW TABLE CALLED PROMOTEMP. THIS IS A TEST CASE.
create or replace procedure sumbit_form
(p_empno IN portal30.wwv_utl_api_types.vc_arr, p_promot IN portal30.wwv_utl_api_types.vc_arr, p_action IN VARCHAR2)
is
begin
if p_action = 'save' then
for i in 1..p_empno.count LOOP
update scott.promotemp
set promot = p_promot(i)
where empno = p_empno(i);
END LOOP;
end if;
commit;
htp.p('<b>Saved Successfully</b>');
htp.p('<table border=1 bordercolor="red">');
for c1 in (select * from promotemp where promot='Y')
LOOP
htp.p('<tr><td>');
htp.p(c1.ename);
htp.p('</td><td>');
htp.p(c1.job);
htp.p('</td><td>');
htp.p(c1.mgr);
htp.p('</td><td>');
htp.p(c1.sal);
htp.p('</td><td>');
htp.p(c1.deptno);
htp.p('</td></tr>');
end loop;
htp.p('</table>');
EXCEPTION
when others then
raise;
end;
Here is the code for the dynamic page.
<HTML>
<HEAD>
<TITLE>Promot Emp</TITLE>
<script language="JavaScript1.1">
function include(form) {
var thisform = form;
for (var i=0; i<thisform.length; i++) {
     if (thisform.elements.type == 'checkbox') {
          if (thisform.elements[i].checked) {
               thisform.elements[i].value = 'Y'; }
          else { thisform.elements[i].value = 'N'; }
form.submit();
function show(form) {
var thisform = form;
for (var i=0; i<thisform.length; i++) {
     if (thisform.elements[i].type == 'checkbox') {
          if (thisform.elements[i].value = 'Y') {
               thisform.elements[i].checked = true; }
          else { thisform.elements[i].checked = false; }
</script>
</HEAD>
<BODY>
<FORM action="scott.sumbit_form" method="post">
<table border=1 bordercolor="red">
<tr>
<td> </td>
<td>Name</td>
<td>Job</td>
<td>Manager</td>
<td>Hire Date</td>
<td>Commission</td>
<td>Department#</td>
<td>Include</td>
</tr>
<ORACLE>declare
i number;
begin
i := 0;
for c1 in (select * from scott.promotemp where promotid = :promotid)
loop
htp.p('<tr><td>');
htp.p('<input type="hidden" name="p_empno" value='||c1.empno||'>');
htp.p('</td><td>');
htp.p(c1.ename);
htp.p('</td><td>');
htp.p(c1.job);
htp.p('</td><td>');
htp.p(c1.mgr);
htp.p('</td><td>');
htp.p(c1.hiredate);
htp.p('</td><td>');
htp.p(c1.comm);
htp.p('</td><td>');
htp.p(c1.deptno);
htp.p('</td><td>');
if (c1.promot = 'Y') then
htp.p('<SELECT NAME="p_promot" SIZE="1">
<OPTION SELECTED VALUE="'||c1.promot||'">Yes
<OPTION VALUE="N">No
</SELECT>');
else
htp.p('<SELECT NAME="p_promot" SIZE="1">
<OPTION SELECTED VALUE="'||c1.promot||'">No
<OPTION VALUE="Y">Yes
</SELECT>');
end if;
htp.p('</td></tr>');
end loop;
htp.p('</table>');
htp.p('<input type="submit" value="save" name="p_action">');
end;
</ORACLE>
</form>
</BODY>
</HTML>
thanks,
Mainak

I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Run script action - ZCM edits my script's content

Good day,
I am implementing a script in a bundle that allows me to generate files on the fly and execute them. Upon saving my "run script" action, ZENworks takes on himself to parse and edit my script, I am not sure why.
A part of my script generates a .hta file, an html application, that is used as a temporary splash screen. For some reason (line 85) my event name (Windows_onLoad()) is renamed by ZENworks like this :
oFile.WriteLine " Sub Window_onload()"
becomes
oFile.WriteLine " Sub Window_<body <body <body <body <body onload()"
Does that ring a bell for anyone?
I have other means of doing what I want but I wanted to bring this specific issue to you. Let me know what you think.
Thank you!
Action parameters :
Code:
Script to run : 'Define oyur own script'
Script content : *copy of the script found below*
Script file extention : .vbs
Path to script Engine : C:\Windows\system32\wscript.exe
Executable security level : Run as dynamic administrator
Requirements : Registry Key and Value exists
\HKEY_LOCAL_MACHINE\SOFTWARE\Lafleche\ZenworksAssignedObjets - Inst-Coba-x64 - NO
ZENworks Agent : 11.2.2.121992 & 11.2.3.18535
ZENworks version : 11.2.3.0
Code:
set oFSO = CreateObject("Scripting.FileSystemObject")
set oShell = CreateObject("WScript.Shell")
strFileName1 = Replace(oFSO.GetTempName,".tmp",".reg")
strFileName2 = oFSO.GetTempName
strFileName3 = Replace(oFSO.GetTempName,".tmp",".hta")
set oFile = oFSO.CreateTextFile(strFileName3)
oFile.WriteLine "<!DOCTYPE html>"
oFile.WriteLine "<html>"
oFile.WriteLine " <head>"
oFile.WriteLine " <title>Title</title>"
oFile.WriteLine " <HTA:APPLICATION Caption=""yes"" SysMenu=""yes"" />"
oFile.WriteLine " <script language=""VBScript"">"
oFile.WriteLine ""
oFile.WriteLine " Sub Window_onload()"
oFile.WriteLine " "
oFile.WriteLine " window.resizeTo 500,250"
oFile.WriteLine " "
oFile.WriteLine " strComputer = ""."""
oFile.WriteLine " Set objWMIService = GetObject(""winmgmts:\\"" & strComputer & ""\root\cimv2"")"
oFile.WriteLine " Set colItems = objWMIService.ExecQuery(""Select * From Win32_DesktopMonitor"")"
oFile.WriteLine " "
oFile.WriteLine " For Each objItem in colItems "
oFile.WriteLine " intHorizontal = objItem.ScreenWidth"
oFile.WriteLine " intVertical = objItem.ScreenHeight "
oFile.WriteLine " Next"
oFile.WriteLine " "
oFile.WriteLine " intLeft = (intHorizontal - 500) / 2"
oFile.WriteLine " intTop = (intVertical - 250) / 2"
oFile.WriteLine " window.moveTo intLeft, intTop "
oFile.WriteLine " idTimer = window.setTimeout(""PausedSection"", 8000, ""VBScript"")"
oFile.WriteLine " "
oFile.WriteLine " End Sub"
oFile.WriteLine " "
oFile.WriteLine " Sub PausedSection"
oFile.WriteLine " window.close"
oFile.WriteLine " End Sub"
oFile.WriteLine ""
oFile.WriteLine " </script>"
oFile.WriteLine " </head>"
oFile.WriteLine " <body>"
oFile.WriteLine " "
oFile.WriteLine " <img src=""http://www.domain.com/logo.png"" alt="""" />"
oFile.WriteLine " "
oFile.WriteLine " <p>Installation underway...</p>"
oFile.WriteLine " "
oFile.WriteLine " </body>"
oFile.WriteLine "</html>"
oFile.Close
oShell.Run strFileName3, 0, true
'oFSO.DeleteFile strFileName3

Hi All, we now have the same issue. running 11.2.4 MU1 tested on IE8 on XP, IE9 on Win7 and ff 17esr, and suse 12.3 with chrome 31... want us to try ie 10 and 11? currently updating to ff 24 esr, and will update IE to 10 for now.
Currently we have the exe defined as "c:\windows\system32\mshta.exe", .hta extension.
Trying to validate the syntax externally, if anyone has any suggestions. Encrypted within the script the app runs fine.
issue is the <body being added, up to several times:
"Sub Window_<body <body <body onload
Window.ResizeTo 590,560
Continue
End Sub"

HT203254 my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Run Script action not working when verifying bundle

Similar Messages

Maybe you are looking for