Not save the record

frm- 40735: insert triger raised unhandled
exception ora-01722
when insert the record so the record is not saved

You have an invalid number being inserted into a number column in the database.
Oracle is preventing the insert and raising an exception. This is a good thing!
Here is the error message from http://ora-01722.ora-code.com/ :
ORA-01722: invalid number
Cause: The attempted conversion of a character string to a number failed because the character string was not a valid numeric literal. Only numeric fields or character fields containing numeric data may be used in arithmetic functions or expressions. Only numeric fields may be added to or subtracted from dates.
Action: Check the character strings in the function or expression. Check that they contain only numbers, a sign, a decimal point, and the character "E" or "e" and retry the operation.

Similar Messages

  • Recording does not save the file

    We are facing a serious problem with Captivate 2. After
    recording about 40 -50 slides it does not save the file.
    The system hangs for several minutes and there’s no
    response.To analyze this problem we have tried out User Forums and
    FAQs.In the User Forum too similar problems are reported. For
    example, visit:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1261116&enterthread=y
    In fact, in our team Captivate is loaded on a standalone
    hi-end system with ample space and memory.
    We have also tried workarounds to address this issue. For
    example, we deleted all temp files from library and we also saved
    it on a short path like c:/project.
    Nothing works!!!

    Hi Madduser and welcome to our community
    When you say
    To analyze this problem we have tried out User Forums and
    FAQs are we to assume you simply searched them and read the
    threads? I'm assuming this because this is your first post here.
    You will note that the thread you linked to mentioned the
    person was attempting to save on a network. I do see you have tried
    using the shortened local path to no avail, so I'm guessing the
    network is ruled out here.
    As usual, I've got more questions than answers, but hopefully
    as we work through them something will come to light.
    * Have you EVER been able to create and save things using
    Captivate? Or did you just install it and it's never worked for
    you?
    * Have you tried what is outlined in the following Technical
    Note?
    Click here to read the
    Technical Note
    Cheers... Rick

  • I'm getting this error message: "iTunes could not connect to this iPad. Could not save the pairing record."

    My iPad wont turn off completely, nor will it boot up, it just keeps thinking about it.  Pretty sure my kids ran up all the memory, and I tried connecting it to iMac to dump pictures, but it only lets me get through it half way, and continues to reboot and gives me through iTunes the error message that it could not save the pairing record?

    Disconnect it and restart your iMac and try again.

  • I can't save the record in a new/empy table of sqlserver in the entity Framework 5.0

    Hi guys ,
    I have tried to become a database expert in Entity Framework but I can't. because I am not able to save the record in a fresh/ empty table of sql server 2008 r2 database. for that I have watched the video tutorials step by steps that how to save the record.
    I followed the tutorials step by step and at the end the result is negative.
    I tried a simple way given below. please some one help me that where and what I missing the.
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Windows.Forms;
    using EmployeesLib;
    namespace EmpApplication
    public partial class Form1 : Form
    private EMPEntities _dbContext;
    public Form1()
    InitializeComponent();
    private void Form1_Load(object sender, EventArgs e)
    _dbContext = new EMPEntities();
    var sql = _dbContext.Employees;
    this.employeeBindingSource.DataSource = sql.ToList();
    private void employeeBindingNavigatorSaveItem_Click(object sender, EventArgs e)
    this.Validate();
    _dbContext.SaveChanges();
    I have used datagrid addid a row by Click Add button on the NavigationBindingsource entered an employee name
    and clicking the save button on the NavigationBindingSource. When I am restarting the application I nothing founding on the Datagrid I am saving before.
    below is the Connection String in the App.config file both in the project.
    APP.CONFIG connection string
        <add name="EMPEntities" connectionString="metadata=res://*/EmpModal.csdl|res://*/EmpModal.ssdl|res://*/EmpModal.msl;provider=System.Data.SqlClient;provider connection string=&quot;data source=(local);initial catalog=Inventory;integrated
    security=True;MultipleActiveResultSets=True;App=EntityFramework&quot;" providerName="System.Data.EntityClient" />

    humm, I falling the ball to the batsman(sqlserver) but it getting "NOBALL" in response(not saving). Ok it my be problem in visual studio I am struggling to remove my operating System, VS2013 and sql server, by reinstalling it might works.
    because i havent any other computer where these application are installed for the test.
    If you create and send me a small project that contain minimum of two columns of table( in sql server ) which can saving new data from datagrid so i will thankfull of you.
    it is just for confirmation that either the problem is in OS or VS.
    I doubt that any of it has anything to do with the issue. If you think it does, then you can post to the forums.
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
    I think you are riding a bad horse (that tutorial) you are using, and you need to change horses. I think the 'modified' state is not being rasied on the entity bound to the grid when it has changed, and EF is not going save any entity that's not in a modified
    state.

  • Why the "Actions" does not save the Overprint Black

    Hi!
    Ai CC 17.0.0
    Why the "Actions" does not save the Overprint Black?
    I can not create an action that will automate this time a very common activity?
    Why?
    Best Regards!

    I was just able to. I am in Illustrator 6 on a Mac OS 10.6. I started a new action and went through the menu just like your screen shot, chose my options and clicked ok, then stopped recording the action.
    I found to use the action I had to have something selected.
    I see that you are in Illustrator CC, perhaps there is a difference there. But for the record, on my system, it worked.

  • Do you want to save the record on detail block

    I have a master detail form. When i update the detail section and navigate to a different master item. I am getting do you want to save the record on my detail block.
    I want to post the changes everytime on the detail block. As i will rollback or commit depending if user saves the form or not on a button press.
    But I can not find any trigger that fires when i change the master record (after changing the detail block) any ideas?

    Hello all,
    I have problem to save list of records in stacked canvas block, that is it always save the record where current reocord indicator is indicating,
    can somebody help me out, how to save data on stacked canvas without having master-detail relationship.
    Regards,
    Ather Ali
    Edited by: user11972516 on Apr 17, 2011 1:27 AM

  • How can I save the recorded calls automatically in CCX?

    I use CCX for contact center. I would like to record the conversation between agents and the callers.
    I use server based recording and I can listen the recorded conversation by Supervisor Record Viewer.
    I also can save the recorded conversation by Supervisor Record Viewer but one-by-one.
    Could anyone suggest me how I can convert the raw files (saved by VoIP Monitor) into wav files simultaneously?
    I know that the Supervisor Record Viewer is not intended to archive conversations, but I have read somewhere that is there any possibility to archive the recorded conversations automatically. Unfortunately I did not find how.
    Thanks,
    Laszlo

    This has been covered on the forum before; however, I'll get you started so you know what you're searching for.
    This is done in two parts:
    You need to configure a workflow action for CAD on the Answered event to start recording if you want this to happen automatically.
    You can use the Raw2Wav.exe file stored on the CCX server as part of a batch file to periodically convert the RAW files to WAV files. The Raw2Wav.exe utility only converts the file. Your batch script would need to take care of moving them off of the CCX server. Do *not* use the CCX server as your file server to store these!

  • Acrobat 9 Shared Review error "Could not save the shared review-enabled pdf file. .

    I attempted to start a Shared Review of a PDF file.  I have been unable to initiate the review.  Upon completion of the setup routine (i.e., filed idenitified, server location identified, participant's email entered, send selected, I get the error message - Status"  Could not save the shared review-enabled PDF file. 

    As a workaround, don't put the source PDF at the network folder location which you have specified in Shared Review wizard. Eg. if you are initiating a review at the network location \\servername\xyz, ensure that your source PDF is not placed at \\servername\xyz.
    I have not understood your second question. Do you mean to say that Acrobat.com option is disabled for you?

  • My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

    My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
    This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
    Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
    Note 2.) I am going to do an import converting everything to .dng  to see if this is a work around.
    Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
    Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
    Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

    Happy New Year!
    The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
    The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
    The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
    Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
    Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
    This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
    I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
    SUGGESTION
    Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
    Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
    Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
    Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
    Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
    Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
    The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
    The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
    Now go back and adjust the Contrast control to establish the best midtone contrast
    If necessary “touch-up” the controls using the same top-down workflow.
    If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

  • Could not save the document to the repository for the following reason

    Hi,
    Some of the Scheduled reports are getting failed because of the following Error.
    Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit - (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server: frs://Output/a_242/027/084/5512178/aduu8vtfkntmvyv8lsnntas.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
    i have searched about this but no use no information on the same.
    So Pls let me know why this problem will occur and how to resolve this,I am new to this forum if any this is wrong pls let me know
    Thanks in advance,

    HiShwetabh Suman
    Thanks a lot for immediate response,
    Please go through the following
    From the logs I see a difference in the execution steps as below:
    [2014-03-31 10:24:15,364] [TID:13] [INFO ] [child.RunStatusTimerTask.run():17]: calling checkRunStatus
    [2014-03-31 10:24:31,887] [TID:3168] [INFO ] [child.ChildImpl.request():23]: request: [GetLoad]
    [2014-03-31 10:24:31,888] [TID:3168] [INFO ] [child.ChildImpl.request():25]: response: [1]
    [2014-03-31 10:24:37,879] [TID:3153] [ERROR] [webi.PublishingSubsystem.run():93]: Throwable exception caught:
    com.businessobjects.rebean.wi.ServerException: Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit
    - (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server:
    frs://Output/a_165/024/084/5511333/aqew_jeqdcjcrukoadjdtk0.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
    Can you please help us understand the reason why the child.runstatustimertask.run() is called in the case where we get the failure. Because upon noticing the difference in the steps of execution I see that this method is called and after that the failure is occuring.
    Also, few other findings are that :
    1. The error occurs from both the nodes adaptive job servers randomly.
    2. The IFRS and OFRS of one of the node is not being used at all for any file transfers (though the configurations are exactly same).
    Please advise and help us get rid of the said error.
    Can u give any permanent solution for us

  • Adobe Reader XI did not save the form data (unlike previous versions). Any way to recover file?

    Adobe Reader XI did not save the form data (unlike previous versions). Any way to recover filled form with data from temp locations?
    I was not aware that ctrl+s no longer works in reader and closed the PDF after savign it(with ctrl+s). However ,the data is lost and there seems to be no way to recover it.
    I cannot find any temp files created by Reader on my system.
    Also to my surprize(and shock), the reader did not even show a warning before closing the PDF. Does anybody know if/where can I recover the file from?
    Guys, Please reply ASAP if you have got any sort of solution!

    Hi Pat,
    Are you using Adobe Reader XI? And not Acrobat. It does not ask me to save the form if there are unsaved changes.
    I have used previous versions of reader for saving this form data and it did allow me to save it with ctrl+s. And those versions did prompt me to save the changes before closing.
    I guess I should not have updated the reader.

  • Query not fetched the record

    Hello,
    Could someone help me please ?
    I have a listing of my sales orders and I want to make changes in my order by opening the form and fetched with that record. When I click on that particular orderno in my listing of order and call the form to display the details, it calls the form but says "Query could not fetch the record". I do not know why ? Please help me with the solution.
    Thanx

    Hello,
    I think you are passing orderno to called form as a parameter. If you are using parameter list check..
    1. If parameter data is getting in form correctly ?
    2. Next, have you changed where clause of other block,so that is will display record with passed orderno ?
    I am expecting more details from you.
    Thanx
    Adi

  • Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WI

    Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
    I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
    thanks in advance

    Hi Trinath,
    Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
    If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
    BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
    - Shahnawaz

  • Garage Band,  I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band.  Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band?  Any solutions

    Garage Band,  I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band.  Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band?  Any solutions

    10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
    Any help would be appreciated
    BTW
    Ive tried all the system sound prefs, and garage band drivers. Back and forth.
    cheers
    ds

  • Could not find the record specified with data_record option

    Hi, we've got the same error in a couple of templates, but have no idea what can be the cause or solution. Does anyone know where I should look when I got "Could not find the record specified with data_record option" as message?
    Thanks in advance!

    Hi Raf,
    That is what it normally is.  I thought it might be related to a multi-record form, like in this blog http://blogs.adobe.com/formfeed/2009/09/working_with_multiple_data_rec.html.
    That blog does not really go into it, but if your "record" is not the directly under the <xfa:data> element then you need a <record> element under config/data to say what the node is, something like <record>Worker</record>.
    You error message sounded familiar but I have not been able to reproduce it, but then I've moved on a couple of versions of Designer.
    Is it possible for you to share your form and seed data?
    Regards
    Bruce

Maybe you are looking for