Not showing Net Order Value in PO Currency in ALV report

Dear all,
Good day.
In my ALV report i want to display net order value in PO currency which comes from ekpo-netwr field. But this field is showing 0.00 for all records. i,e value is not coming here. Please tell me how to show the value in ALV and how to show blank space when value is not in database.
Thanks.
Best regards.

Hi,
Place a break-point just before you call the ALV display "Reuse_alv_*".
Check the value here in the column price.
Most probably you do not have a value here which is why there is no value displayed.
Regards,
Jovito

Similar Messages

  • General Evaluation report T-code;ME80FN showing Net order value Zero only

    Hi Gurus ,
    I am Executing the T-code ;ME80FN in that report i am getting the Net order value as Zero for all report entities Kindly advise for this soon .
    Many Thanks
    Kiran

    Hi,
    If PO price ZERO in ME80FN report, then cross check PO item status( is item set for deletion flag or item available with price) in t.code:ME23N and if price very much available in ME23N, then check your user ID authorized for ME80FN report
    Also you can cross check PO price in ME2N report or ME80RN report.
    Regards,
    Biju K

  • PO Release Strategy not triggerred for particular Total Net Order Value

    Dear,
    I am currently facing the issue where release strategy for purchase orders is not getting triggered for a particular value or lower.
    For order value 1 INR or less, no release strategy is triggered for new created PO. And for value > 1 INR release strategy is getting triggered.
    All otehr PO characterstics are the same, I mean to say the values for other characterstics such as plant material group are identical.
    But the characterstics for release for Total net order value are <= 30000 INR. There are two system copies, where in one system the same release strategy is working as expected. But in other system the above mentioned issue occurs. There is no differnce which I can see in the release strategy setup.
    Please suggest for solution.
    Thank you.
    Warm Regards.

    Dear All,
    While looking further into the issue by going into debugging mode, we have found that in include LCLSCF2I, Internal table p_selection_criteria_tab , the value for ATFLV (Internal Floating point from) gets different values in the two systems. For example, in the affected system, for PO with 1INR tottal value, for one of the Total value chaaracterstics before INR characterstic, ATFLV value is 0,0000000000000000E+00, hence it gets out of loop and doesn't trigger release strategy.
    But in another system for same PO values and release setup, ATFLV value is 1,0000000000000000E+00 for that characterstic.
    May I know how the value for this field gets calculated.
    Thank you.
    Warm Regards.

  • ME2K - Wrong net order value

    Dear All,
    In ME2K, System is not showing the net order value in the report. I have found a OSS note 985769 and implemented the same.
    Now system is showing the netorder value in the report but its not calculating the net order value. Its just showing zero value.
    Help me if you have faced this problem and fixed it.
    Regards
    Senthil Kumar

    Hello Senthil,
    Net order value in ME2K corresponds to net value stored in  accounting  (table EKKN-NETWR) which is filled only in case of service purchase order. So for service PO, system will display this in ME2K or ME2J report which are based on account data display but not for material PO.
    This is not correspond to EKPO-NETWR.      
    Please, consider that EKKN-NETWR is not the same as EKPO-NETWR. They come from two different database tables. In the accounting view of the report, we list what is read from the database table EKKN. In the basic list, we read from EKPO. EKKN-NETWR is only used in service items, so you will see zero values for non-service item categories. The F1 help might have the sameexplanation for NETWR, and I could see how this might cause some confusion. However, the help is based on the data element, which is the same for both tables. It would not make sense for us to change thisreport.
    I hope I have been able to clarify your doubts.     
    Regards,
    Mauro

  • Very Urgent--Adding Header condition amount in Net order value of PO

    Dear friends,
    Our client has following requirement.
    ---In Purchase order ,Header conditions related to delivery costs are using.
    --Currently when we add the header condition,that amount is not adding to the Net order value and not adding to the total value in the PO print document.But proportionaly distributing to the line items.
    --Because of this two problems one is not adding to net order so not considered for release strategy,secondas it is not adding in the net order value,header condition amount also is not coming in the total value in the print out.
    --Currently, this header amount is splitting and posting seperate line item for GR/IR clearing act in MIGO and MIRO..
    I have removed the Statistical tick and accrual tick in IMG, then header amount is adding to the Net order value and adding in the total value in the PO print. But in MIGO/MIRO, This amount is adding to the GR/IR clearing act ,instead of seperate GR/IR line item in MIGO/MIRO documents, But client wants the postings shall be made similar to previous one.
    I have checked with removing only Stastical key and not removing the accrual key.But header condition is not adding to Net order value. I have searched for User exits/BAdis,suitable are not found.
    How the Header condition amount can be added to the Net order value without removing the Statistical key in IMG.Are there any User exit/BAdis,
    Please suggest.
    Regards,
    Dayanand

    Dear Sairam,
    Thanks for your reply.
    Asper your suggestions i tried as follows.
    1) We have got condition types like surcharges/discounts before "Net inc dis"
        and Delivery costs/accruals/frieghts after "Net inc dis".
    2) My requirement is that whatever conditions types after Net inc dis like Del costs/Frieghts are not included in Net order value in PO,so amount is not included in Release strategy and print.Currently this amount is coming as seperate line itemGR/IR Clearing account in MIGO/MIRO.
    3) Asper your suggestion,i tried with Surcharge  condition existing before "Net inc Disc"--This is a header condition(Cond.cat is Insurance),but stastical tick is not there in Scema. I tried as it is ,amount is adding in Net order value.But seperate line item for this amount is not coming in MIGO/MIRO
    4) When i ticked the accrual key and statistical tick and added Accrual-FR1,then PO created ,amount is not adding in Net order value.
    5) When i removed only Stastical tick only even though amount is not adding.
    6) When i removed the Accrual tick also i.e both the ticks then only amount is adding in Net order value.But Line item of the header condition is not dispalying as a seperate line item in MIGO/MIRO
    For these Header conditions ,seperate line item shall come ,at the same time amount shall add in Net order Vaue for the purpose of including in the amount for Release strategy and print.
    Please suggest how to do it.
    Regards,
    Dayanand

  • CJI5 commitment line item report not showing po gross value

    Dear All,
    system is showing only net value in CJI5 report, actaully gross value of po must be reflected in CJI5 report and this happening in all po's like material, service's etc. example is as follows.
    Example:
    po net value: 1000
    st 10%: 100
    po gross value : 1100 (inclusive of all taxes, ed, disc. etc)
    what could be the reason for not showing po gross value in commitment line item report.
    Thanks & Regards,
    Sandeep

    Hi,
    As far as i know the commitment report will never show you the value that is inclusive of taxes. It will only show the net value of the PO.
    I just tried a scenario in my system by creating a PO for a net value of 3000 GBP and based on the tax code i entered system calculated a tax of 525 GBP. However when i check CJI5 report it shows only 3000 GBP as commitment and not 3525 GBP. This is how the standard system behaves, i believe. You can cross check this in the table COOI. The COOI table also shows the net value of the PO and does not include the tax amount in commitment.
    Regards,
    Gokul

  • In smartforms the quantity field is not showing the perfect value .

    In smartforms the quantity field is not showing the perfect value because the point is shifting left
    insted of showing 8.10 it is showing 80.00.

    Hi,
    Dont use the quantity field same as that it come from interface Fm declare one field for quantity in the global settings and write the logic to pass the value to that field and pass that global value to the particular texts...same is the case with currency fields also.
    Regards,
    Rohan.

  • Total net order value Customer wise

    Dear All,
    I want to extract total Net sales order value customer wise for developing a report. I need to know SAP table details to get Total sales order values customer wise.
    Standard report does not match my requirment.
    I need to extract details from VBAP, customer wise. Please advise me to build a logic.
    Thanks,
    sajeewa.

    You can get the Net value from VBAP-NETWR by line item & the sold to is on VBAK-KUNNR, then make a join on VBAK-VBELN & VBAP-VBELN, then group it by KUNNR to display totals by Customer.

  • Increase the size of the net order value

    Hai,
    i want to increase the size of the net order value, actually the net order length is 9 charector's but i want to increase the length up to 12 , is any possiablity is there, and another one is today i released one lostdated po. nextday i check the report how many released lost day, the report will show's the document date type so we con't findout how many are released lost day,if there any possiablity is there, send your feed back,
    thanking you
    T krishna Prasad

    hi
    for net order value field incease check in customization is there any setting there.
    you need to develop your custom report.
    Edited by: AP on Feb 17, 2009 7:39 AM

  • Net order value

    hai gurus
    i have problem for me2m,me2n report, it shows net price only now i verified me80fn report then i got net order value , but i want total 10 line items value in one line like Po No, Vendor, Po Org, Plant, Stog, Net order value, and also verified the drill down total but here also i did't get the vendor name and other detials. so please send any other suitable report
    thanking you
    prasad

    You wont get such report in SAP. We also wanted such reports.We developed the Z report for our client.

  • Standard Reports ME2K doesnt display Net order value

    Dear,
    On executing Standard Reports like ME2K,ME2N. I see Net Order Value column with Zero value, except for POs with Item category "D".
    Why is this ???
    Apperciating ur Suggestions
    Regards
    Zulfikar

    Hi Zulfikar,
    Net order value in ME2K corresponds to net value stored in accounting (table EKKN-NETWR) which is filled only in case of service purchase order. So for service PO, system will display this in ME2K or ME2Jreport which are based on account data display but not for material PO. This is not correspond to EKPO-NETWR.                                   
    EKKN-NETWR is not the same as EKPO-NETWR. They come from two different   database tables. In the accounting view of the report, we list what   is read from the database table EKKN. In the basic list, we read from EKPO. EKKN-NETWR is only used in service items, so you will see zero  values for non-service item categories. The F1 help might have the same  explanation for NETWR, and I could see how this might cause some  confusion. However, the help is based on the data element, which is the    
    same for both tables.
    I hope this will clarifies your doubts.                           
    Regards,
    Mauro

  • Parameter Field issue : Parameter not showing in enter values.

    i got three paramater setup...
    All three parameters are used in record selection formula.
    When i click on refresh, only two parameters are showing up in enter values screen...why thired parameter is missing?
    two parameters are date and third one is string. String parameter is not showing in enter values. How to fix this?.

    Hi,
    I haven't run into this problem so I'm not sure if it's a bug or not.  When you added the parameter to the report, did you type the parameter into the formula yourself or did your double-click on it from the Field Explorer?
    It should be fine adding it from the Field Explorer.  Strange but not really sure why it's not working for you though.
    Good luck,
    Brian

  • The parameter 'host_name_full' of ICM not showing the right value

    Hi ,
    The parameter 'host_name_full' is not showing the correct value.
    It is still showing the value as fully qualified domain name, where as we have reverted the setting some time back .
    can anyone let me knwo from where does it pick up the value from .
    and how can i Edit the value to show the correct value
    Thanks
    Nikhil

    Hi Nikhil,
    Check this 2 links will be useful to u r query...
    http://help.sap.com/saphelp_nw04/helpdata/en/e7/7af83b0255a206e10000000a11402f/content.htm
    http://www.basisconsultant.com/modules.php?name=Content&pa=showpage&pid=12
    Regards,
    Sridhar

  • I Published a report on the report server but it's not showing in the internal application we use to access reports

    Hi, 
    I Published a report on the report server but it's not showing in the internal application we use to access reports. The name of the application we use is called MAMA and this application has access to all the reports on the SQL report server. My email is
    [email protected] my cell phone number is 201-888-7952. 
    Thanks. 

    Hi Roger,
    Based on my understanding, you publish a report on the report server. When you access reports with internal application, the report doesn’t display, right?
    In your scenario, since you mentioned you have published the report to report server, please go to report manager, check if you can see the published report and open the report properly. If the published report is displayed on report manager, it should not
    be the issue in Reporting Services. In this scenario, since the MAMA application has established connection with on report server, it may not update items on report server after you publish your report onto report server. So please try to “refresh” in MAMA
    or reconnect the report server. If issue persists, I suggest you contact the MAMA application vendor to get some more effective advices.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

  • Invoicing Plan Net Value not equals to Ordered Value

    Dear Xperts,
    Need your advice.
    Is it SAP standards, when an invoicing plan BPO is created with reference to an outline agreement the net value at the outline agreement (header statistic) is taken from the BPO net value (Quantity X Price) NOT BPO ordered value (Quantity X Price X Months).
    Scenario Simulated:
    (1)     Contract Detail (value contract)
    Target Value = RM12,000 (price RM1000 ; 12 months validity)                                                                     
    (2)     Purchase Order
    Quantity = 1 pcs ; Price = RM1000 ; Invoicing Plan = 12 months
    Ordered Value = RM 12,000
    Net Value = RM1000
    As a result the utilization value (contract header statistic) is:
    Target Value : RM12,000
    Net Value : RM1000.
    This will lead to a misleading info of utilization value of the contract.
    Your experts explaination is highly appreciated.

    Anybody?

Maybe you are looking for