CJI5 commitment line item report not showing po gross value

Dear All,
system is showing only net value in CJI5 report, actaully gross value of po must be reflected in CJI5 report and this happening in all po's like material, service's etc. example is as follows.
Example:
po net value: 1000
st 10%: 100
po gross value : 1100 (inclusive of all taxes, ed, disc. etc)
what could be the reason for not showing po gross value in commitment line item report.
Thanks & Regards,
Sandeep

Hi,
As far as i know the commitment report will never show you the value that is inclusive of taxes. It will only show the net value of the PO.
I just tried a scenario in my system by creating a PO for a net value of 3000 GBP and based on the tax code i entered system calculated a tax of 525 GBP. However when i check CJI5 report it shows only 3000 GBP as commitment and not 3525 GBP. This is how the standard system behaves, i believe. You can cross check this in the table COOI. The COOI table also shows the net value of the PO and does not include the tax amount in commitment.
Regards,
Gokul

Similar Messages

Commitment Line Item report - BE and Settlement Unit issue

Dear experts,
Request your kind help.
This is with respect to viewing the commitment line item report in ECC 6 for RE-FX master data objects. There are two scenarios.
Scenario 1
Purchase requisition (PR) is created with a business entity (BE) as an Account Assignment object. After the PR is released the same is used to create a Purchase Order (PO). After the PO has been successfully created, I am running the Commitment Line Item report (REISCOLIBD) giving the BE number as a search parameter. The report shows perfectly the PO and the amount of commitment.
Scenario 2
Purchase requisition (PR) is created with a BE as a Account Assignment object. Further to that under the Settlement section, inside the RE Obj box I am also specifying the Service Charge Key, the Settlement Unit and the Ref Date. After the PR is released the same is used to create a Purchase Order (PO). After the PO has been successfully created, I am running the Commitment Line Item report (REISCOLIBD), again by mentioning only the BE number as the input parameter. This time the report does not show the PO at all under commitment line items and instead gives the message "no line items were selected". But here is the catch. When I am running the transaction KSB2 and I am clickng on 'further selection criteria' and then 'Ref Doc num' and then typing the PO number and then running the report, it shows the result perfectly.
Can someone please tell me why in the second scenario, the transaction REISCOLIBD is failing to capture the data related to commitment line items?
Please refer to Note 1271310 to see how to adapt the transaction REISCOLIBD to suit the needs for Commitment Line Item report.
Regards,
Suvarghya Dutta

Hello all,
I have been able to find the answer. As of now Commitment Line Item report for any master data for service charge settlement does not exist and and as such wont be available.
Kind regards,
Suvarghya Dutta

RE: COPA report and customer line item report not matching

Hi All,
COPA report and customer line item reports (fd10n) are not matching please let me know the reason.

ok

Tax Line items are not showing seperately as per exp in FB60

Hi,
In FB60, I have booked the two expenses with tax code separately. While simulating the entry the tax lines are not showing separately as per expenses. For example:
Suppose my tax code = AB which is equal to 10% maintained in FTXP.
At present entry is coming as follows through FB60 is:
Debit     Postage expenses     500 tax code AB
Debit     Stationery expenses     400 tax code AB
Debit     Tax               100
Credit     Vendor               1000
But we need the entry is follows
Debit     Postage expenses     500 tax code AB
Debit     Stationery expenses     400 tax code AB
Debit     Tax               50
Debit      Tax               40
Credit     Vendor               1000
But I change the tax code for second line AB to XY then calculation of tax entries shows separately according to expenses.
Please let me know where did I do the mistake in configu2026u2026..
Regards,
Babjee

Hi!
Normally, all amounts being posted to the same GL Account and determined from the same tax code as automatically derived, will generate one common auto-generated line item. This is because tax reporting is usually based on tax code (external/tax reporting) and or GL account (internal/financial reporting).
In your first case since the tax code used for both line is the tax code was the same, it would be posting to the same GL Account - hence a common line item got auto-generated.
Check the Account Key and Assigned GL Accounts in T.Code FTXP. Additionally, check the Condition Type set-up (identified from FTXP) in T.Code SPRO / from menu IMG node Check Calculation Procedure.
Regards,
Ruchi

CJI5 commitment line items open items only

hi guys,
on the CJI5 screen paramter, there is one check box open item only.
Could someone tell the exactly meaning of the paramter? How can we judge an WBS commintemnt line item is open or not open?
thanks in advance

another question:
we always get the commitment amount from COOI table, if we do the partial GR for a PO iteam, can we still get the right commitement from COOI table via field WHGBTR?
thanks agian

Line items are not showing in fbl3n,fs10n,faglb03,fagll03

hi experts,
i am facing a problem to see the line item of inter unit clearing a/c. i am not able to see the line items in fbl3n,fs10n,fagll03 and faglb03. system response is "You have stored account 300000 in company code L001 as a clearing account. At the same time, you use line item management with this account" and"Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected"
i do not understand the system response. can anyone please help me to solve this problem?
thanks &regards
konishko

sir
thanks for your reply. as per your suggestion i am trying to change in fs00 to uncheck the line item management but i am unable to do that,system shows that i have to uncheck the open item managemt also but the said account contain the open item. so i am not able to change the same. is there any other way to do that. can you please suggest me in detail? and one more thing that i am able to see only the balaces in fs10n. but not able to see the line item.this is probably for missing the business area in line item.
but i needs to see the line items.
can you please tell me any alternate way in detail to solve this problem?
thanks and regards
konishko

Line items are not showing in fbl1n/fk10n

hello all,
Again i needs your help. this time i am not able to see the line items in fbl1n and fk10n. system shows 360 line items are displayed but no line item are showing in screen.In fk10n i am just able to see the period wise balance. but line item not showing. this issue is only with my 5 vendor. in case of other vendor, i am able to see as i wish.
please suggest me how to solve it.
regards
konishko

Hi,
check the Reconciliation of that vendor.for that recon account line display should be selected.
For other vendors, reconciliation account is with line item display .selected. That might be the reason to show line items for remaining items.
check GL master of Recon acccount.

What are criteria of F-44 to show line item or not show?

Hello all,
I had reversed mm doc (from migo) with mr8m then I used f-44 for clear vendor account.
The fi doc that occured had no line item, please tell me how to know what criteria of situation that show or not show line item in fi document.
Thanks for advance,
Fon

Hi,
I have the similar case but opposite of that. When I use F-44 to clear vendor line items, it generates line itmes but I dont want system to generate it.
Kindly let me know the setting or criteria for the same.
Regards,
Niraj

In A/P Invoice line items is not showing.............

Hi All,
There is an A/P Invoice, with no line Items. But the Document Total is Rs. 100000/- When I check the Base Document there are 10 Line Items in GR(PO). Surprised to see this..............How is it possible. And when i open A/P Invoice base document icon also unable mode. Please do the needfull.
Arbaaz,

Hi Arbaaz !
As you told that you have tracked the base document with the help of users , that this particular GRPO is the base document of that invoice . Now have you checked the target document of that particular GRPO . Is this drag you to the invoice or this is also freezed ?
If the Target document icon is also freezed this means that your invoice is not at all linked to any GRPO , the invoice is made independently somehow ..
Thanks
Ashish

Line item taxes not showing in IDoc Orders02

We are on ECC6 and using IDoc ODERS02, when viewing the purchase order in me23n, taxes are visible on the line item under the invoice tab. When we view the same purchase order via the IDoc that was created, the line item taxes are not being displayed in segments E1EDP04 and E1EDP05.
Is there some configuration we need to do to get the taxes info into the IDoc?

Hi ,
Those Taxes fields should be selected for the segments you have mentioned .
Check out transaction bd53 ehen you create a Reduced Message type and check the segaments where fields are activatied or not .
Please reward if useful.

HTMLDB updateable report not showing the updated values after pagination

Create updateable multiple record report usingselect wwv_flow_item.display_and_save(1,xxxx) a,wwv_flow_item.display_and_save(2,yyyy) b,
htmldb_item.select_list(3,STATUS,'Not Applicable;
Not Applicable,Pending;Pending,Closed;Closed') Status,
htmldb_item.text(4,REASON) REASON,
wwv_flow_item.date_popup(5,null,TARGET_DATE) TARGET_DATE
FROM table_name using sql_report wizard.
Report executed properly. User can also update the status,reason and target date columns. But if the report contains more than 1 page, updated values in the previous page cannot be seen(old values are displayed).
Kinldy let me know is there any way to store the updated value and show the user again.
Thanks in advance.

Thanks marc for your feedback. Ofcourse what you said is right. But is there any way i can see the changed values before submitting .
For example, out of the 10 records in the 1st page if the user changes, column value for 9 records and goes to the next page and changes 10 records in the 2nd page and comes back to the 1st page to change the records which he has changed already, he cannot see the changed value for all the 9 records which he has changed.
Is there any way i can make the user see the changed value
before submitting after navigating to the other page of the report and comes back?
thanks in advance.

S_ALR_87013543 report not showing line item correctly

Hi all,
The S_ALR_87013543 report or any other cost plan report not showing the line item report correctly.
eg When the S_ALR_87013543 report executed it showing 100 as a plan value against one of cost element when we double click and go to line item report it showing only one entry of 50 which is wrong.
when i checked the COSP table for the wbse with that cost element it has two entries with value type 1 and 29. value type 29 says value from sales order and 1 as plan .
My query is why S_ALR_87013543 report not showing the correct value or shall it not pick the value from value type 29.
regards
Shiv

Hi Preeti,
Thanks for the updates but one more issue. In one case COSP has a one entry for value type=1 with Busniess transaction SDOR but it was not shown in line item report. it says " no line item were selected". inspite of entry in COSP.
Screenshot of report attached,.
when i checked the drill down report for line item it says no line item found.
Any idea what went wrong
Regards
shiv

Cost element and Line item reports show different actual costs

Hi PS experts,
My client has an issue pertaining to actual cost reports. The cost element report shows actual costs $42,000 for one WBS and when I double click to see details the value it shows is $2100. Even when I checked line item report for this WBS the value is $2100. What could be the reason for getting different values? If some one throw some light on this it would be great helpful to me
Regards,
Laxminarsimha

Laxminarsimha
The values in CJI3 should be correct and will include all postings (e.g. Settlement values) and possibly Actual Revenues unless a filter is in place - so take this as being your correct figure to start with.
Your drilldown will show the same value as CJI3 because it is CJI3
Any cost element report you are using is probably correct for what you are asking - is this a Standard Cost Element Report you are using or is it bespoke
One thing to be careful of when you drilldown on Cost Element Reports is that you do not always get the a make up of the value you have drilled down
e.g.
Cost Element Report was run for Period 1 to 6 2008 and shows £100.00
You drilldown and sometimes the drilldown automatically shows ALL line items e.g £500.00 (not just the values for periods 1 to 6 of 2008 which you may expect £100.00)
In the past I've removed the drilldown capability from bespoke cost element reports to prevent drilldown to the line item report (which is CJI3) because of this problem.
Usually where values for a a number of periods only (not total costs) was required
Other factors to consider
Revenues/Settlements may be excluded from Cost Element Report but will not be excluded from CJI3 unless you specifically restrict
You need to identify which types are postings are missing from the Cost Element Report (what is common...cost element, dr/cr indicator, business transaction)
I've also hit the mistake in the past where I've asked for periods 1 2007 to period 3 2008 and instead of giving me just over a years worth of actual it gave me actuals for periods 1 to 3 for 2007 and 1 to 3 for 2008.
Hope this helps
Steve

Unable to trace out the Reference Document number in commitment line item.

Dear All,
Kindly help me in bellow problem
When I click the reference document no. in the line item wise display the commitment in t-code S_ALR_87013558 at that time the system open the display PR screen and the massage is displayed in the below, the Purchase document does not exist.
Due to this reason the price capture in commitment line item is not traceable and I am not able to delete the commitment line item.
Kindly suggest how to trace out the reference document number and delete it and release the commitment price.
Thanks,
Asu.

>
Asutosh Mahapatra wrote:
> Dear All,
>
> Kindly help me in bellow problem
>
>
> When I click the reference document no. in the line item wise display the commitment in t-code S_ALR_87013558 at that time the system open the display PR screen and the massage is displayed in the below, the Purchase document does not exist.
>
> Due to this reason the price capture in commitment line item is not traceable and I am not able to delete the commitment line item.
>
> Kindly suggest how to trace out the reference document number and delete it and release the commitment price.
>
> Thanks,
> Asu.
Can you explain what is your requirement..?
Do you want to correct the data in the report..?
Or it is effecting your availability control and you want to correct it..?
Or you want to trace a deleted document..? Which is not possible...

Internal Order - KOB1 - Actual Cost Line Item Report

Hi Friends,
I need to understand how the KOB1 Report - Actual Cost Line Item works.
As per my understanding when ever there is cost posted with assignment to Internal order this report should reflect the amount.
We have a PO with account assignment to Internal order and Asset.
When Goods Receipts is posted the with posting key 70, the report is reflecting the amount.
When Invoice Receipt is posted KOB1 report is not reflecting this amount.
There is one Invoice receipt posted with entry
31 Dr
70 DR
86 Dr GR/IR
and the 70 debit amount is coming in the report.
So can any one please tell me does this report show all the entries with IO assignment or when posting key 70, 75 ,80,81 are used.
And also is GR considered as cost posting or IR considered.
This issue has been pending from 3 months.
Appreciate your help.
Thanks
Satish

The KOB1 line item report will show you any expense account posted to that order.
Basically you are the order collecting the cost. During the invoice receipt, the expense account are not involved, except in cases of a price difference.
The vendor account credit and debit to GR/IR are not concerned with the order.

CJI5 commitment line item report not showing po gross value

Similar Messages

Maybe you are looking for