Notes app not working

Hi there, can anyone help one me? I tried to open the notes app on my iPad and it closes within seconds of opening. All other apps are working fine any suggestions, thanks Carla

Reset iPad and try again.
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

Similar Messages

IPhone 6 Voice Memos App Not Working

I love my new iPhone 6 (with current iOS 8) but one of the standard apps I always use is Voice Memos. The Voice Memo app launches but does not allow me to record anything. When I press the red record button, it simply moves back and forth like I've entered a bad password. To resolve, I've stopped and restarted the application multiple times, restarted my iPhone, etc but nothing seems to work. Any ideas or suggestions on how to resolve? Thanks.

I have several apps that no longer work. I contacted a few of them and only one responded so far to tell me they are working on an upgrade so that it will work with ios4. It seems silly to me that Apple did not make it so your current apps would work with the new software. The upgrade is cool, but there is also no explanation of how some new features work, and having trouble with apps that I have already paid for does not make me very happy. Hopefully the updates don't take too long....

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Why app store is not working without card details

My app store is not working without entering card details , I lost my olf apple id .
i MADE a new one .

What do you mean by 'not working' ? Unless the instructions on this page are followed when creating an account : http://support.apple.com/kb/HT2534
then credit card details will need to be entered before the account can be used to download any item from the store.
If you mean that you are being prompted to review your account then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054#24303054
If not then you will either need to enter credit card details (you should be able to delete the card after entering it) or create a new account, and use the instructions on that HT2534 page when creating it.
How did you lose your old account ? If you can't remember its details then try the following :
Recovering a forgotten iTunes Store account name
Apple ID: How to find your Apple ID

Exchange Office Web Apps Preview Does not work in OWA (web)

I have setup Exchange 2013, Lync 2013, SharePoint 2013, IIS as a Reverse Proxy Server, an Office Web Apps Server, etc, etc. Everything is setup to use SSl (https) and everything works great EXCEPT... Office Web Apps... and ONLY via Exchange and OWA (exchange
browser-based access).
I can login via the intranet or Internet for everything (SharePoint, Outlook, and Lync) and Office Web apps functionality works flawlessly for all... except for Exchange and OWA.
If I login in to a web-based Exchange seeion, everything works right and I can see the various attachments.
For all other scenarios, Office Web Apps works (SharePoint, Outlook, Lync, etc), but in owa (web version of Outlook) I see that Office Web Apps is triggered (I see the Office Web Apps text and the dots that indicate something is loading)... However, it just
crashes and eventually times out (see image):
If I look in the error logs for the Web Apps Server I see this:
Essentially, it looks like that owa uses a distinctly different path to load the attachments into the Web Apps Server such that the file is not found!
What is happening? Why does Exchange OWA (web version of Outlook) somehow use a different path that fails to locate attachments in Office Web Apps, but Lync, Outlook, and SharePoint (both in Intranet and Internet) work perfectly?
This is VERY frustrating. Can anyone help?
Please?
Clearly, the reverse proxy is working, the certificates are working, OAuth is working, etc. It seems there must be some variable/path that is only defined in Exchange for OWA that uses a different path for Office Web App attachments and that path is WRONG!
Please, help!
Thanks

Hi,
Thanks for sharing. It’s glad to hear the good news.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Updating my .ipa in DPS App Builder for testing is not working

Hi there,
I've build my .ipa file in DPS App Builder for testing on my iPad before I publish it to the app store. No problem. I tested it and saw some modifications to make. I made the changes on my folio, updated it in the folio builder of indesign (on the cloud). Then I get back to DPS App Builder and rebuild an .ipa file from the "Manage" and "Modify" windows, it download and test my certifates, seems to work ok. Then I've created the new .ipa file (after erasing the old one on my desktop and iTunes) but when I synch it back on my iPad it's not updated. It's still the first version of my folio without the changes.
I tried to create a new app from the beginning but the single edition serial number does not work anymore. So my only solution is to update my folio, right? But what is the right way to do it? Am I missing something? I didn't find any answer in the step by step guide about that.
Or is it possible to delete completly the first version in DPS App Builder to recreate it without losing my single edition serial number as I didn't submit it to Apple yet?
Do I have something to do in the Folio Producer?
Thanks for your help.
Julien.

Single Edition Serial is one time use thus modification is not possible from your end directly in case you wish to use the same serial number. For such cases you need to contact DPS Support, who can get an approval on a serial number reset after reviewing the need.
In this case, I'll take this offline with you in reference to forum post # http://forums.adobe.com/message/5597607.

SAP Mobile app Stock photo not work for network location

Hi Experts
I found if we use network location path (e.g.
servername\pic folder\) in SAP Business One General Settings -> Path, Picture Folder, then if we logon SAP B1 Mobile app from iPad/iPhone, and try to open stock photo, we will get error:
Processing Failed
Internal server error: contact your system administrator
It looks like it only work for local path, e.g C:\pic
Even we put path as :
local pc name\pic folder, it is also not work.
Any idea about this?
Thanks
Tim

The first link is a temporary fix for a machine that only one or two people will use. This will not fix the Library Machines that some 3000 users can use at anytime. I can not pre-add all these users every time we image a machine. We also loan out laptops and I need these machine to wirelessly login dynamically to the domain. But I also need these machine to allow access if these machine are removed from our campus and the wireless access is not available.
Thank again for the help and I hope someone at Apple can fix this soon. I going to have a hard time telling the client that thay can not use the OS that came with they're machine.

SSO to Web App using Application Integrator - not working

Hi,
I've set up App Integrator for my web application, following the Yahoo example in the guide. My URL template is <System.protocol>://<System.server><System.uri>?<Authentication> and the fraction for user mapping is op=<MappedUser>&pwd=<MappedPassword>.
It doesn't log me in. Even if I change the URL template to the actual address of my web app and use a real user & password (rather than <Mapped..>), it still doesn't work.
I've got SSO to my web app working using a HTTP system and URL iview but I would really like to see the App Integrator working as well. Any ideas?
Many thanks
Jane

Can anyone please help with this? I installed a http sniffer so maybe I could see what was going on. My HTTP System simply goes to the URL with the parameters added as expected, but the app integrator one is a bit more complex - I can see the URL & parameters in this function:
    function requestTargetURL() {
      var theURL = "<b>HTTPS://(myserver)/log-in.htm?op=(####)&pwd=(####)</b>";
      var dsmObj;
      if (hasNestedFrameStructure()) {
        location.replace(theURL);
        dsmObj = parent.EPCM.DSM;
      } else {
        document.body.scroll = "no"; // for IE only
        var theIframe = document.getElementById("iframe_GETRedirect_1593748234");
        theIframe.style.visibility = "visible";
        theIframe.src = theURL;
        dsmObj = EPCM.DSM;
        document.title = 'JDS';
    function onloadhandler(){
      setTimeout("requestTargetURL()",1);
and the server/username/password are all correct but there's a lot of other stuff in there which I'm not sure how affects it. Anyone know have any ideas why this isn't working? Does it matter that my web app is https but the portal is http?
Any help greatly appreciated!
Thanks in advance
Jane

Application installer not working with PC Suit App...

I have a Nokia E60 and Windows XP SP2. After installing PC Suite 6.82.96.4 I try to open the App. installer but it opens and closes inmediately (blinks) but do not work. I try to do the installation through the File manager, and I can see and open the Nokia browser, phone memory etc, but whenever I try to install, the following message is shown Nokia Application Installer has encountered a problem and needs to close. We are sorry for the inconvenience. Detail is: Error signature AppName: applicationinstaller.exe AppVer: 6.82.96.4 ModName: unknown ModVer: 0.0.0.0 Offset: 90909090 It also shows that there is an error report that I cannot find C:\DOCUME~1\rodrigm3\LOCALS~1\Temp\9e61_appcompat.txt Could you please help me to fix the problem? thanks a lot

Regarding my problem, I attach the log file generated in the error report in case it can help to the Nokia support (or anybody able to help...) It should have to be a PC config problem, as I am totally able to install application with the same version of PC Suite in other colleagues PCs Thanks for your support....
Attachments:
42cb_appcompat.txt ‏63 KB

Voice Memos app not working - IOS 4 upgrade

I upgraded my 32Gig 3GS to IOS4 on Monday and now my Voice Memos app isn't working. I can playback existing recordings but am unable to record new ones. Anyone have a similar experience?

I have several apps that no longer work. I contacted a few of them and only one responded so far to tell me they are working on an upgrade so that it will work with ios4. It seems silly to me that Apple did not make it so your current apps would work with the new software. The upgrade is cool, but there is also no explanation of how some new features work, and having trouble with apps that I have already paid for does not make me very happy. Hopefully the updates don't take too long....

Iphone 6 plus podcadt app not working

TThe ios8 podcast app isn't working on my iPhone 6plus. It crashes continually and hangs on even one download.
DO I NEED to find a 3rd party app to work?

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

IPhone 4 Remote App Not working

Hello,
Sorry for posting another 'not working' thread, but having searched the forum I cannot find my answer.
I am not very technical, but I have iTunes and an iPhone 4.
I have the remote app and the app has worked perfectly up until recently.
I have upgraded iTunes to 10 and also my antivirus.
Now I know alot of these things could be caused by the firewall, but I have allowed iTunes to be let through the firewall and I have switched off the firewall in the past to ensure it was not this.
When I switch on the computer and open iTunes then go to the remote app it works. It is when the iPhone 'sleeps' that the library wont re connect, OR if i have been using iTunes and then try and start the remote that it will not work.
Any ideas at all as it is so frustrating. I am not technically minded, so switching router channels etc and proxy settings/DHCP etc dont really make sense to me.
I have tried rebooting everything including the router, but believe it is something simple as it was working prior to iTunes 10.
I am running a PC on Vista
Thanks
Steve

no I use both ipad2 iphone4 with remote app and have no issues with ios
try removing the setup and start over

Iphone 4 push notifications not working for any app

hi, Actually I own an iPhone 4 os 4.2.1(8c148). The thing is that push notification for all the apps that support this feature is not working, I've been an iphone user for long time now, so I konw all the stuff about turning on the push notifications etc. the problem is that my phone give me the pushes like 1 hr or 2 late, or some times never , i just have to open the apps to see my new messages and stuff. Since i live in colombia I have brought the iphone to the store and they take it for like a week and then they give me the phone back saying that is ok , but it isn't. I' have reinstalled the software, I've done anything you can think of, like turning on an of push notification, put it in plane mode, restore as new, backups, and I don't know what else to do, and the thing is that in colombia they don't exchange your phone that easy as it is in the US. So please any advise? ANd I'm sorry about my English. Thank you!

Unfortunately you have already done everything we can possibly instruct you to do.. at this point the only option is getting them to exchange it its under warranty its not working you have to get a exchange

Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
is the deployment server.
I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
Message:There is an error in XML document (1, 331491).
Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
Please provide suggestions on this I need to resolve this ASAP.

Hi,
This question is better asked here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
Experts here are more familiar about it and they can give you more efficient suggestion.
Thank you.

Since iOS 4.2.1 Update - Document viewer Apps do not work right!

Before I updated to iOS 4.2.1 Air Sharing (Document Viewer) was working (so were all my Document Viewers), but currently, they do not work correctly. I have checked about three others...all have the following problems:
Since I updated (to iOS 4.2.1), all the documents open up to FULL SCREEN mode (which it had never done before, since the very beginning of the AppStore). Full Screen mode means that it looks like a Word Document on the computer, with the margins showing. This is rediculous for the screen of an iPhone or iPod Touch. There is no need to see the margins. Also, the font size is so small that it makes it almost impossible for most people without a magnifying glass. The document used to open up to a "zoomed in" view of the text. This allows the person using the application to actually read the text. This also allowed scrolling up and down easily. Now, with the new Full Screen view, to get the text large enough to see, you have to double tap (or spread your fingers on the screen to scale it big enough) on the text to read it. Then, when you scroll up and down, it sometimes scrolls side to side or diagonally (into the white margins), making reading cumbersome.
The other problem with the new view is that the font sizes are all messed up. The normal font (whether 9 pt. to 16 pt.) looks the same. The italic font looks bigger than the normal font, though it is the same point size. It skews the page and alters what the original documents looks like.
I have contacted the developer of Air Sharing to complain, but he said the following:
Hello,
Thank you for the test file. I do see what you're referring to. We use Apple's built-in Office viewer for Air Sharing. This means to display files like .docx ones, we use Apple's viewer. It's possible they changed their viewer in the most recent iOS update to cause this change. Because it's not our viewer we have no control over how it displays such files. Other apps using Apple's viewer will encounter the same issue. I wish there was more we could do on our end to help resolve this problem.
Cheers,
Elliot Chase
Avatron Software, Inc.
Please tell someone to fix this situation. I can provide you with information (and screen shots of before and after) to back up all my complaints. Thank you for listening.

Ah, so that could be a good search term.
Things get a bit more weird though. I was looking through the commands in the drop down menu and saw under "Archive" this: "Put/Send the Apps you bought to this computer" (rough translateion in English) So I tried that out.
I could only do that by going to "Store" and (**** how to say that in English) "Allow" this computer to do that. This is weird as this is the same computer that I have always used for anything to do with the iPhone! I have now 2 computers that are allowed to sync, and it is one machine. Beats me!
At a certain point the transfer proces stopped again and again I was requested to "empower" this computer again, as out of the 65 apps now 21 were not allowed to be transfered! That did not work. It now keeps telling me that I have 2 computers allowed for transferring apps and these last 21 can not be put in the library.
I am a bit at my wits end!
But really thanks for trying to help out! It seems that 4.2.1 has some real problems when reading through the discussions!
Cheers!

LaserJet Pro MFP M125nw - Scan to app All-in-One Remote does not work

Hi gurus,
Basically I have pruchased that super-printer and I am now trying to achieve scan to my mobile devices.
I have one iPad 2 on iOS 7, on 2 Android devices (smaller tablet and phone) both running Kitkat 4.4.2
I am trying to submit a scan from all these devices and retrieve the output within my mobile devices, actually this is fairly described here and concerns accurately my printer model : http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02486319&tmp_task=useCategory&cc=us&destPage=pr...
Unfortunately, What happens :
- From my iPad, the AiO app states that my printer is not compatible with the application !!
- From my 2 Android devices, the All-in-One Remote app will work fine, except the scan feature as nothing happens (well, when tapping either 'Preview' or 'Scan' button in the Scan section, I see a 'Cancel' button during 0,1 second and I am back to that scan section)
Any one could help please ???
This question was solved.
View Solution.

Hello,
Can no one help ?
Is the product description misleading ? Is the AiO app not really reasy to support this printer ?

Notes app not working

Similar Messages

Maybe you are looking for