Notes - Maximum Length?

Is there a limit to how many pages a 'note' is on the 3rd gen. nano? I converted a (.pdf) ebook into a txt file and when I synched it to the ipod it cut off at the bottom. What should I do? It's in plain font

Hey there,
"The Notes folder on your iPod can hold very large text files, but iPod can only display up to 1000 files, the first 4 kilobytes (KB) of text, or about 4096 characters will be shown for each note."
This is according to the Apple support document below. Hope this helps.
[Long notes are truncated on your iPod|http://support.apple.com/kb/TS2026?viewlocale=en_US]
B-rock

Similar Messages

Maximum length property check works fine in 10g, but after upgrade the check is not performed

Recently we upgraded our oracle forms from 10g to 11gR2.
one of the text item has maximum length property defined as 3 (data type is number and format mask is 009). In 10g, in ENTER-QUERY mode, maximum length property check was happening, and user was not allowed to enter more than 3 digits. once the form is upgraded to 11g, in same mode no check is happening. I am aware that in ENTER-QUERY mode, lot of validation won't happen. But client don't want to know all details. He want it to work as it works in 10g. Any help will be appreciated.
Thanks.

Recently we upgraded our oracle forms from 10g to 11gR2.
one of the text item has maximum length property defined as 3 (data type is number and format mask is 009). In 10g, in ENTER-QUERY mode, maximum length property check was happening, and user was not allowed to enter more than 3 digits. once the form is upgraded to 11g, in same mode no check is happening. I am aware that in ENTER-QUERY mode, lot of validation won't happen. But client don't want to know all details. He want it to work as it works in 10g. Any help will be appreciated.
Thanks.

In my ALV o/p what is the maximum length of column, I can display ( because

In my ALV o/p what is the maximum length of column, I can display ( because the length of the text some times exceeding 600 chars ) ?
Thanks in ADVANCE

I have declared like
<b> S_LAYOUT-MAX_LINESIZE = 1000.
S_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.</b>
However ALV output not displaying the entire length.
Call the following function to display output in ALV form
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM = 'ZFRSBOI0'
            IS_LAYOUT          = S_LAYOUT
            IT_FIELDCAT        = FIELDCAT
            IT_EVENTS          = P_EVENTS[]
           it_sort            = p_it_sort[]
            I_SAVE             = 'A'
       TABLES
            T_OUTTAB           = PDET_OTAB_ALV1
       EXCEPTIONS
            PROGRAM_ERROR      = 1
            OTHERS             = 2.
If the function call is not successful, raise error message
and come out from the program
IF SY-SUBRC <> 0.
    MESSAGE E000(00) WITH
                      'Unable to display report'(E01).
    EXIT.
ENDIF.

How do I identify the maximum length of video in iMovie which can be made into a dvd in iDVD, please?

How do I identify the maximum length of video in iMovie which can be made into a dvd in iDVD, please?
I made a sellection of video clips > pressed on "share" > on iDVD > after one hour of formating the message was under "project duration" : "Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window."
I have edited out some of the clips and waited anothe hour or so bu the same message appeared !
I want to know in advance how long can be the video clip sellection for the quality of video chosen ( the best before HD).
please help if ou can.
thank you very much indeed.
Michael
North London

It's trying to tell you to change the encoding setting:
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

On load, getting error: Field in data file exceeds maximum length

Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0    Production
TNS for Solaris: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
I'm trying to load a table, small in size (110 rows, 6 columns). One of the columns, called NOTES is erroring when I run the load. It is saying that the column size exceeds max limit. As you can see here, the table column is set to 4000 Bytes)
CREATE TABLE NRIS.NRN_REPORT_NOTES
NOTES_CN      VARCHAR2(40 BYTE)               DEFAULT sys_guid()            NOT NULL,
REPORT_GROUP VARCHAR2(100 BYTE)              NOT NULL,
AREACODE      VARCHAR2(50 BYTE)               NOT NULL,
ROUND         NUMBER(3)                       NOT NULL,
NOTES         VARCHAR2(4000 BYTE),
LAST_UPDATE   TIMESTAMP(6) WITH TIME ZONE     DEFAULT systimestamp          NOT NULL
TABLESPACE USERS
RESULT_CACHE (MODE DEFAULT)
PCTUSED    0
PCTFREE    10
INITRANS   1
MAXTRANS   255
STORAGE    (
            INITIAL          80K
            NEXT             1M
            MINEXTENTS       1
            MAXEXTENTS       UNLIMITED
            PCTINCREASE      0
            BUFFER_POOL      DEFAULT
            FLASH_CACHE      DEFAULT
            CELL_FLASH_CACHE DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
I did a little investigating, and it doesn't add up.
when i run
select max(lengthb(notes)) from NRIS.NRN_REPORT_NOTES
I get a return of
643
That tells me that the largest size instance of that column is only 643 bytes. But EVERY insert is failing.
Here is the loader file header, and first couple of inserts:
LOAD DATA
INFILE *
BADFILE './NRIS.NRN_REPORT_NOTES.BAD'
DISCARDFILE './NRIS.NRN_REPORT_NOTES.DSC'
APPEND INTO TABLE NRIS.NRN_REPORT_NOTES
Fields terminated by ";" Optionally enclosed by '|'
NOTES_CN,
REPORT_GROUP,
AREACODE,
ROUND NULLIF (ROUND="NULL"),
NOTES,
LAST_UPDATE TIMESTAMP WITH TIME ZONE "MM/DD/YYYY HH24:MI:SS.FF9 TZR" NULLIF (LAST_UPDATE="NULL")
BEGINDATA
|E2ACF256F01F46A7E0440003BA0F14C2|;|DEMOGRAPHICS|;|A01003|;3;|Demographic results show that 46 percent of visits are made by females. Among racial and ethnic minorities, the most commonly encountered are Native American (4%) and Hispanic / Latino (2%). The age distribution shows that the Bitterroot has a relatively small proportion of children under age 16 (14%) in the visiting population. People over the age of 60 account for about 22% of visits.   Most of the visitation is from the local area. More than 85% of visits come from people who live within 50 miles.|;07/29/2013 16:09:27.000000000 -06:00
|E2ACF256F02046A7E0440003BA0F14C2|;|VISIT DESCRIPTION|;|A01003|;3;|Most visits to the Bitterroot are fairly short. Over half of the visits last less than 3 hours. The median length of visit to overnight sites is about 43 hours, or about 2 days. The average Wilderness visit lasts only about 6 hours, although more than half of those visits are shorter than 3 hours long.   Most visits come from people who are fairly frequent visitors. Over thirty percent are made by people who visit between 40 and 100 times per year. Another 8 percent of visits are from people who report visiting more than 100 times per year.|;07/29/2013 16:09:27.000000000 -06:00
|E2ACF256F02146A7E0440003BA0F14C2|;|ACTIVITIES|;|A01003|;3;|The most frequently reported primary activity is hiking/walking (42%), followed by downhill skiing (12%), and hunting (8%). Over half of the visits report participating in relaxing and viewing scenery.|;07/29/2013 16:09:27.000000000 -06:00
Here is the full beginning of the loader log, ending after the first row return. (They ALL say the same error)
SQL*Loader: Release 10.2.0.4.0 - Production on Thu Aug 22 12:09:07 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control File:   NRIS.NRN_REPORT_NOTES.ctl
Data File:      NRIS.NRN_REPORT_NOTES.ctl
Bad File:     ./NRIS.NRN_REPORT_NOTES.BAD
Discard File: ./NRIS.NRN_REPORT_NOTES.DSC
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table NRIS.NRN_REPORT_NOTES, loaded from every logical record.
Insert option in effect for this table: APPEND
   Column Name                  Position   Len Term Encl Datatype
NOTES_CN                            FIRST     *   ; O(|) CHARACTER
REPORT_GROUP                         NEXT     *   ; O(|) CHARACTER
AREACODE                             NEXT     *   ; O(|) CHARACTER
ROUND                                NEXT     *   ; O(|) CHARACTER
    NULL if ROUND = 0X4e554c4c(character 'NULL')
NOTES                                NEXT     *   ; O(|) CHARACTER
LAST_UPDATE                          NEXT     *   ; O(|) DATETIME MM/DD/YYYY HH24:MI:SS.FF9 TZR
    NULL if LAST_UPDATE = 0X4e554c4c(character 'NULL')
Record 1: Rejected - Error on table NRIS.NRN_REPORT_NOTES, column NOTES.
Field in data file exceeds maximum length...
I am not seeing why this would be failing.

HI,
the problem is delimited data defaults to char(255)..... Very helpful I know.....
what you need to two is tell sqlldr hat the data is longer than this.
so change notes to notes char(4000) in you control file and it should work.
cheers,
harry

Set the maximum length of textedit element in webdynpro

Hi All,
How to set the maximum length of texedit element to a some constant characters.setting col and row property to 10 and 2 didnot set max length to 40.setting width and height also didnt helped to limit the characters user can enter to 20.
Thanks,
pkv

>
pkv wrote:
> Hi All,
>
> How to set the maximum length of texedit element to a some constant characters.setting col and row property to 10 and 2 didnot set max length to 40.setting width and height also didnt helped to limit the characters user can enter to 20.
>
> Thanks,
> pkv
Hi,
Setting row and height is for layout purposes and not for the limiting of text in a TextEdit UI Element.
To ensure that the Text Exit has only 40 characters in 04s - you can do as Alka has suggested.
For doing the same in CE 7.1 - you can use the onChange Action and write code inside that method to limit the number of characters.
I would suggest that you use IWDMessageManager to show a message in the MessageTray whenever the user goes over the limit of 40 characters - rather than accept the whole text and then show some sort of popup.
Thanks.
p256960

SDO_ORDINATES.X.Field in data file exceeds maximum length

Hi All,
While loading data in .SHP file into oracle spatial through SHP2SDO tool following error message appears:
Error message:
Record 54284: Rejected - Error on table GEO_PARCEL_CENTROID, column CENTROID_GEOM.SDO_ORDINATES.X.
Field in data file exceeds maximum length.
I read some where this is due to the SQL * Loader takes default column value to 255 characters. But there is confusion to me how to change the column size in control file because it is object data type. I am not sure this is correct or not.
The control file show as below:
LOAD DATA
INFILE geo_parcel_centroid.dat
TRUNCATE
CONTINUEIF NEXT(1:1) = '#'
INTO TABLE GEO_PARCEL_CENTROID
FIELDS TERMINATED BY '|'
TRAILING NULLCOLS (
CENTROID_ID INTEGER EXTERNAL,
APN_NUMBER      NULLIF APN_NUMBER = BLANKS,
PROPERTY_A      NULLIF PROPERTY_A = BLANKS,
PROPERTY_C      NULLIF PROPERTY_C = BLANKS,
OWNER_NAME      NULLIF OWNER_NAME = BLANKS,
THOMAS_GRI      NULLIF THOMAS_GRI = BLANKS,
MAIL_ADDRE      NULLIF MAIL_ADDRE = BLANKS,
MAIL_CITY_      NULLIF MAIL_CITY_ = BLANKS,
MSLINK,
MAPID,
GMRotation,
CENTROID_GEOM COLUMN OBJECT
SDO_GTYPE INTEGER EXTERNAL,
SDO_ELEM_INFO VARRAY TERMINATED BY '|/'
(X FLOAT EXTERNAL),
SDO_ORDINATES VARRAY TERMINATED BY '|/'
(X FLOAT EXTERNAL)
Any help on this would appreciate.
Thanks,
[email protected]

Hi,
Looks like you have a problem with record 61 in your data file. Can you please post it in reply.
Regards
Ivan

SQL Loader - Field in data file exceeds maximum length

Dear All,
I have a file which has more than 4000 characters in a field and I wish to load the data in a table with field length = 4000. but I receive error as
Field in data file exceeds maximum lengthThe below given are the scripts and ctl file
Table creation script:
CREATE TABLE "TEST_TAB"
    "STR" VARCHAR2(4000 BYTE),
    "STR2" VARCHAR2(4000 BYTE),
    "STR3" VARCHAR2(4000 BYTE)
);Control file:
LOAD DATA
INFILE 'C:\table_export.txt'
APPEND INTO TABLE TEST_TAB
FIELDS TERMINATED BY '|'
TRAILING NULLCOLS
( STR CHAR(4000) "SUBSTR(:STR,1,4000)" ,
STR2 CHAR(4000) "SUBSTR(:STR2,1,4000)" ,
STR3 CHAR(4000) "SUBSTR(:STR3,1,4000)"
)Log:
SQL*Loader: Release 10.2.0.1.0 - Production on Mon Jul 26 16:06:25 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File:   C:\TEST_TAB.CTL
Data File:      C:\table_export.txt
Bad File:     C:\TEST_TAB.BAD
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 0
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table TEST_TAB, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
   Column Name                  Position   Len Term Encl Datatype
STR                                 FIRST 4000   |       CHARACTER
    SQL string for column : "SUBSTR(:STR,1,4000)"
STR2                                 NEXT 4000   |       CHARACTER
    SQL string for column : "SUBSTR(:STR2,1,4000)"
STR3                                 NEXT 4000   |       CHARACTER
    SQL string for column : "SUBSTR(:STR3,1,4000)"
value used for ROWS parameter changed from 64 to 21
Record 1: Rejected - Error on table TEST_TAB, column STR.
Field in data file exceeds maximum length
MAXIMUM ERROR COUNT EXCEEDED - Above statistics reflect partial run.
Table TEST_TAB:
0 Rows successfully loaded.
1 Row not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array:                 252126 bytes(21 rows)
Read   buffer bytes: 1048576
Total logical records skipped:          0
Total logical records read:             1
Total logical records rejected:         1
Total logical records discarded:        0
Run began on Mon Jul 26 16:06:25 2010
Run ended on Mon Jul 26 16:06:25 2010
Elapsed time was:     00:00:00.22
CPU time was:         00:00:00.15Please suggest a way to get it done.
Thanks for reading the post!
*009*

Hi Toni,
Thanks for the reply.
Do you mean this?
CREATE TABLE "TEST"."TEST_TAB"
    "STR" VARCHAR2(4001),
    "STR2" VARCHAR2(4001),
    "STR3" VARCHAR2(4001)
);However this does not work as the error would be:
Error at Command Line:8 Column:20
Error report:
SQL Error: ORA-00910: specified length too long for its datatype
00910. 00000 - "specified length too long for its datatype"
*Cause:    for datatypes CHAR and RAW, the length specified was > 2000;
           otherwise, the length specified was > 4000.
*Action:   use a shorter length or switch to a datatype permitting a
           longer length such as a VARCHAR2, LONG CHAR, or LONG RAW*009*
Edited by: 009 on Jul 28, 2010 6:15 AM

Ctxload error DRG-11530: token exceeds maximum length

I downloaded the 11g examples (formerly the companion cd) with the supplied knowledge base (thesauri), unzipped it, installed it, and confirmed that the droldUS.dat file is there. Then I tried to use ctxload to create a default thesaurus, using that file, as per the online documentation. It creates the default thesaurus, but does not load the data, due to the error "DRG-11530: token exceeds maximum length". Apparently one of the terms is too long. But what can I use to edit the file? I tried notepad, but it was too big. I tried wordpad, but it was unreadable. I was able to create a default thesaurus using the much smaller sample thesaurus dr0thsus.txt, so I confirmed that there is nothing wrong with the syntax or privileges. Please see the copy of the run below. Is there a way to edit the droldUS.dat file or a workaround or am I not loading it correctly? Does the .dat file need to be loaded differently than the .txt file?
CTXSYS@orcl_11g> select banner from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
CTXSYS@orcl_11g> select count(*) from ctx_thesauri where ths_name = 'DEFAULT'
2 /
COUNT(*)
         0
CTXSYS@orcl_11g> select count(*) from ctx_thes_phrases where thp_thesaurus = 'DE
FAULT'
2 /
COUNT(*)
         0
CTXSYS@orcl_11g> host ctxload -thes -user ctxsys/ctxsys@orcl -name default -file
C:\app\Barbara\product\11.1.0\db_1\ctx\data\enlx\droldUS.dat
Connecting...
Creating thesaurus default...
Thesaurus default created...
Processing...
DRG-11530: token exceeds maximum length
Disconnected
CTXSYS@orcl_11g> connect ctxsys/ctxsys@orcl
Connected.
CTXSYS@orcl_11g>
CTXSYS@orcl_11g> select count(*) from ctx_thesauri where ths_name = 'DEFAULT'
2 /
COUNT(*)
         1
CTXSYS@orcl_11g> select count(*) from ctx_thes_phrases where thp_thesaurus = 'DE
FAULT'
2 /
COUNT(*)
         0
CTXSYS@orcl_11g> exec ctx_thes.drop_thesaurus ('default')
PL/SQL procedure successfully completed.
CTXSYS@orcl_11g> host ctxload -thes -user ctxsys/ctxsys@orcl -name default -file
C:\app\Barbara\product\11.1.0\db_1\ctx\sample\thes\dr0thsus.txt
Connecting...
Creating thesaurus default...
Thesaurus default created...
Processing...
1000 lines processed
2000 lines processed
3000 lines processed
4000 lines processed
5000 lines processed
6000 lines processed
7000 lines processed
8000 lines processed
9000 lines processed
10000 lines processed
11000 lines processed
12000 lines processed
13000 lines processed
14000 lines processed
15000 lines processed
16000 lines processed
17000 lines processed
18000 lines processed
19000 lines processed
20000 lines processed
21000 lines processed
21760 lines processed successfully
Beginning insert...21760 lines inserted successfully
Disconnected
CTXSYS@orcl_11g> select count(*) from ctx_thesauri where ths_name = 'DEFAULT'
2 /
COUNT(*)
         1
CTXSYS@orcl_11g> select count(*) from ctx_thes_phrases where thp_thesaurus = 'DE
FAULT'
2 /
COUNT(*)
      9582
CTXSYS@orcl_11g>

Hi Roger,
Thanks for the response. You are correct. I was confusing the terms thesaurus and knowledge base, which sometimes seem to be used interchangeably or synonymously, but are actually two different things. I read over the various sections of the documentation regarding the supplied knowledge base and supplied thesaurus more carefully and believe I understand now. Apparently, the dr0thsus.txt file that I did ultimately load using ctxload to create a default thesaurus is the supplied thesaurus that is intended to be used to create the default English thesaurus, which supports ctx_thes syn and such. The other droldUS.dat file that I mistakenly tried to load using ctxload is the supplied compiled knowledge base that supports ctx_doc themes and gist and such. In the past I have used ctx_thes.create_thesaurus to create a thesaurus, but using ctxload can also load a thesaurus from a text file with the data in a specified format. Once a thesaurus is loaded using ctxload, it can then be compiled using ctxkbtc to add it to the existing compiled knowledge base. So, the knowledge base is sort of a compilation of thesauri, which is what led to my confusion in terminology. I think I have it all straight in my mind now and hopefully this will help anybody else who searches for the same problem and finds this.
Thanks,
Barbara

XML data value exceeds maximum length - ORA-30951

Hello,
I am receiving ORA-30951: Element or attribute at Xpath /dataroot/Respondent[1]/Response[3]/Value exceeds maximum length error during the XML load.
I have registered the schema and it works fine when the Value is less than 64k but fails if its greater. I tried changing the type of Value to type="xsd:base64Binary" xdb:maintainDOM="false" xdb:SQLName="LOB_DATA" xdb:SQLType="BLOB" but then I get ORA-00932: inconsistent datatypes error.
Can someone please let me know what I am doing wrong or is there a way I can load more than 64k length elements on 10g?
Thanks
Here is my schema.
var SCHEMAURL varchar2(256)
var XMLSCHEMA CLOB
set define off
begin
:SCHEMAURL := 'http://xmlns.example.com/Svy_Resp.xsd';
:XMLSCHEMA := '<?xml version="1.0"; encoding="utf-16"?>
<xsd:schema attributeFormDefault="unqualified" elementFormDefault="qualified" version="1.0"; xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" xdb:storeVarrayAsTable="true">
<xsd:element name="dataroot" xdb:defaultTable="SVY_RESP_XML_SCHEMA" type="datarootType" />
<xsd:complexType name="datarootType" xdb:maintainDOM="false"
xdb:SQLType="Dataroot_T">
<xsd:sequence>
<xsd:element maxOccurs="unbounded" name="Respondent" type="RespondentType" />
</xsd:sequence>
<xsd:attribute name="generated" type="xsd:dateTime" />
</xsd:complexType>
<xsd:complexType name="RespondentType" xdb:maintainDOM="false" xdb:SQLType="Respondent_Type">
<xsd:sequence>
<xsd:element name="RespondentID" type="xsd:int" />
<xsd:element name="KsID" type="xsd:int" />
<xsd:element name="email" type="xsd:string" />
<xsd:element name="SyID" type="xsd:int" />
<xsd:element name="KSuID" type="xsd:int" />
<xsd:element name="Completed" type="xsd:int" />
<xsd:element name="SubmitDateTime" type="xsd:dateTime" />
<xsd:element maxOccurs="unbounded" name="Response" type="ResponseType" />
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="ResponseType" xdb:maintainDOM="false" xdb:SQLType="Response_Type">
<xsd:sequence>
<xsd:element name="ResponseID" type="xsd:int" />
<xsd:element name="RespondentID" type="xsd:int" />
<xsd:element name="CID" type="xsd:int" />
<xsd:element name="AID" type="xsd:int" />
<xsd:element name="Value" type="xsd:string"/>
<xsd:element name="QID" type="xsd:int" />
<xsd:element name="SID" type="xsd:int" />
</xsd:sequence>
</xsd:complexType>
</xsd:schema>';
end;
/

Thanks for the quick response. I am not able to modify the source file, but will it be possible to set the value to NULL if it exceeds the max length instead of failure?
Thanks

Sqlldr - filler columns exceeds maximum length

Hi All,
DB version : 10.2.0.1.0
We are getting a CSV file with 127 fields. We require to load first 9 fields and the 127th field using SQLLDR. What is the best way to specify this in Control file?
Currently we are giving like
   C10 filler,
   C11 filler,
   C127 filler,
   column_name
   1. Is there any other better approach available?
2. We are gettiing issues when, filler columns exceeds maximum length. We tried to give like
              c10 char(4000) filler ,
   But it gives sybtax error.What is the work around for this?
Thanks in advance,
Jeneesh
Please note that using EXTERNAL TABLEs or other methods is not feasible for us.

Hi jeneesh,
Did you try,
c10 filler char(4000)from docs
The syntax for a filler field is same as that for a column-based field, except that a filler field's name is followed by FILLER.Best regards
Peter

SQL Loader - data exceeds maximum length

I am having an issue with SQL Loader falsely reporting that a column is too long in a CSV upload file. The offending column, Notes, is defined in the staging table as VARCHAR2(1000). The text in the Notes column in the upload file for the record that is being rejected is only 237 characters long. I examined the raw data file with a hex editor and there are no special cahracters embedded in the column. The CSV upload was recreated but the false error remains.
Any ideas what to check? Any suggestion appreciated.
Here are the pertinent files.
Control File:LOAD DATA
   INFILE 'Mfield_Upl.dat'
   BADFILE 'Mfield_Upl.bad'
   TRUNCATE
   INTO TABLE Mfield_UPL_Staging
   FIELDS TERMINATED BY ',' optionally enclosed by '"'
     ControlNo CHAR,
     PatientID CHAR,
     CollectDate DATE "MM/DD/YYYY",
     TestDate DATE "MM/DD/YYYY",
     AnalyteDesc CHAR,
     Results CHAR,
     HiLoFlag CHAR,
     LoRange CHAR,
     HiRange CHAR,
     UnitOfMeas CHAR,
     Comments CHAR,
     Notes CHAR,
     ClinicalEvent CHAR,
     OwnerLName CHAR,
     OwnerFName CHAR,
     PetName CHAR,
     AssecNo CHAR,
     SpecimenID CHAR
{code}
Staging Table:{code}
CREATE TABLE Mfield_UPL_Staging
    ControlNo      VARCHAR2(20),
    PatientID      VARCHAR2(9),
    CollectDate    DATE,
    TestDate       DATE,
    AnalyteDesc    VARCHAR2(100),
    Results        VARCHAR2(100),
    HiLoFlag       CHAR(10),
    LoRange        VARCHAR2(15),
    HIRange        VARCHAR2(15),
    UnitOfMeas     VARCHAR2(25),
    Comments       VARCHAR2(100),
    Notes          VARCHAR2(1000),
    ClinicalEvent VARCHAR2(20),
    OwnerLName     VARCHAR(50),
    OwnerFName     VARCHAR(50),
    PetName        VARCHAR(50),
    AssecNo        NUMBER(10),
    SpecimenID     NUMBER(10)
{Code}
Error Log File:{code}
SQL*Loader: Release 9.2.0.1.0 - Production on Wed Aug 11 08:22:58 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Control File:   Mfield_UPL_CSV.ctl
Data File:      Mfield_UPL.dat
Bad File:     Mfield_Upl.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table MFIELD_UPL_STAGING, loaded from every logical record.
Insert option in effect for this table: TRUNCATE
   Column Name                  Position   Len Term Encl Datatype
CONTROLNO                           FIRST     *   , O(") CHARACTER
PATIENTID                            NEXT     *   , O(") CHARACTER
COLLECTDATE                          NEXT     *   , O(") DATE MM/DD/YYYY
TESTDATE                             NEXT     *   , O(") DATE MM/DD/YYYY
ANALYTEDESC                          NEXT     *   , O(") CHARACTER
RESULTS                              NEXT     *   , O(") CHARACTER
HILOFLAG                             NEXT     *   , O(") CHARACTER
LORANGE                              NEXT     *   , O(") CHARACTER
HIRANGE                              NEXT     *   , O(") CHARACTER
UNITOFMEAS                           NEXT     *   , O(") CHARACTER
COMMENTS                             NEXT     *   , O(") CHARACTER
NOTES                                NEXT     *   , O(") CHARACTER
CLINICALEVENT                        NEXT     *   , O(") CHARACTER
OWNERLNAME                           NEXT     *   , O(") CHARACTER
OWNERFNAME                           NEXT     *   , O(") CHARACTER
PETNAME                              NEXT     *   , O(") CHARACTER
ASSECNO                              NEXT     *   , O(") CHARACTER
SPECIMENID                           NEXT     *   , O(") CHARACTER
Record 1042: Rejected - Error on table MFIELD_UPL_STAGING, column NOTES.
Field in data file exceeds maximum length
Table MFIELD_UPL_STAGING:
3777 Rows successfully loaded.
1 Row not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
{code}

Try:
-- Etc ...
Notes CHAR(1000),
-- Etc ...SQL*Loader limits string buffer to 256 unless specified different.
:p

ORA-30951: ...exceeds maximum length

Oracle Database 10g Release 10.2.0.1.0 - Production
I am new to XML and having a problem importing data using the XML Repository. I have annotated the schema and validated it using XML Spy. I am able to register the schema w/o errors. I am now working through the issues as they occur during the insertion of xml documents. Thes section below is giving me an error (bottom) that the data exceeds the maximum length. The "DATA" in the xml doc is a pdf file that has been converted to characters by some method. The size element has a data value of 5008. Seems to be too long for a varchar2. I tried RAW, CLOB, BLOB. I was pretty sure they wouldn't work and they didn't. I get an error that the xml/xdb types are incompatible.
How can I modify the schema to get this element to load?
Is it possible to tell oracle to ignore an element so I can eliminate those that are not critical? This would be very helpful.
Thanks!
Schema -
<xs:element name="NpdbReportList" minOccurs="0">
<xs:complexType>
<xs:sequence maxOccurs="unbounded">
<xs:element name="NpdbReport" minOccurs="0">
<xs:complexType>
<xs:all minOccurs="0">
<xs:element name="DCN" minOccurs="0"/>
<xs:element name="DateReport" type="Date" minOccurs="0"/>
<xs:element name="ReportType" type="IdRef" minOccurs="0"/>
<xs:element ref="LOB" minOccurs="0"/>
</xs:all>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:complexType name="LOB" xdb:SQLType="LOB_T"xdb:maintainDOM="false">
<xs:all>
     <xs:element name="Type" type="IdRef"/>
     <xs:element name="Size"/>
     <xs:element name="Data" xdb:maintainDOM="false" xdb:SQLName="LOB_DATA" xdb:SQLType="VARCHAR2"/>
</xs:all>
</xs:complexType>
ftp> mput *
mput Smyth_Steven_1386367.XML? y
227 Entering Passive Mode (127,0,0,1,83,221)
150 ASCII Data Connection
550- Error Response
ORA-30951: Element or attribute at Xpath /Provider/NpdbReportList/NpdbReport[1]/LOB/Data exceeds maximum length
550 End Error Response
28706 bytes sent in 0.014 seconds (1.9e+03 Kbytes/s)
ftp>

Thanks for your time Marco.
Here is the header:
<?xml version="1.0" encoding="UTF-8"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="qualified" attributeFormDefault="unqualified" xdb:storeVarrayAsTable="true" xdb:mapStringToNCHAR="true" xdb:mapUnboundedStringToLob="true">
I made the following change -
<xs:element name="Data" xdb:maintainDOM="false" xdb:SQLName="LOB_DATA" xdb:SQLType="CLOB"/>
I received this error -
ORA-31094: incompatible SQL type "CLOB" for attribute or element "Data"
ORA-06512: at "XML_TEST.XML_TEST_SCHEMA_REGISTER", line 48
I did a little more testing after the first post. I used the same type as an element that is defining image data.
<xs:element name="Data" type="xs:base64Binary" xdb:maintainDOM="false" xdb:SQLName="LOB_DATA" xdb:SQLType="BLOB"/>
While this did register and I was able to load a record, I am guessing that this will render the data for this element usless but at least the record loads. I'll still need to resolve this issue as the .pdf data is important.
Thanks
Joe

How to set the maximum length that a user can enter in Msgstyledtextinput

Hi Everyone,
I'm currently using EBS 11.5.1 and 10.2g DB
Is there a way that I can set the maximum length that a user can input?
I changed the Maximum Length to lower number (from 150 to 100) but I get the following error.
Developer Mode Exception encountered in item SaveLocation
Error: The item SaveLocation has a maximum length (100)
         which is not equal to that of the corresponding VO attribute
       , SaveLocation length (150).
Action: Make sure they are equal in size. There must be other way to set that value
Thanks,
Elmer

You have to set the maximum length of column to 150 to avoid this error.
You can set the same in Jdev.
Thanks
--Anil

Is there a maximum length for a custom expression?

Is there a documented maximum length of a custom expression in a sync rule? I have been unable to find one and as of yet, have not hit one. But for curiosity's sake, I was wondering if there is a limit?
Thanks

Hello FIM-EN,
Custom Expression of Synchronization rules are saved to two attributes: Initial Flow and Persistent Flow.
Both are "Indexed string", so theoretically, the length is unlimited.
Regards,
Sylvain

Notes - Maximum Length?

Similar Messages

Maybe you are looking for