NOTHING_PROVIDES_DEP: suse-sam-data needed by suse-sam-0.8.1-0.1.1.noarch

Tried to patch my SLES11 dom0 64bits and got this:
Bundle installation failed: "Failed to prepare bundles for install:
NOTHING_PROVIDES_DEP: suse-sam-data needed by
suse-sam-0.8.1-0.1.1.noarch "
How to resolve it?
Technical Consultant
Kerfi AB Stockholm Sweden

Well, I did not remove it from zlmmirror bundle patch, just from my own
created rpm-bundles for sles11_domo_x64.
Assigning the pool to the server as well will solve the problem, you say?
SLES11-Pool
SLES11-Updates
that goes hand-in-hand... but, I use a NFS share to the installation
source instead.
When registrering my SLES11 to ZLM server it does remove everything.
How can I re-add my installation source AFTER zlm-agent has been
installed. Automatically. Run a script from zlm-policy?
Anders
On 2010-01-28 16:36:03 +0100, brunold <[email protected]> said:
>
> Anders,
>
> I see .... the suse-sam-data is just in the SLES11-Updates-bundle.
> So assigning that single patch will result in that problem.
> You would need to have the monolithic bundle available at the device as
> a catalog to allow it to get the required package out of it.
>
> I think when you rerun the mirror, that removed package will be added
> back into the patch.
>
> Rainer
Technical Consultant
Kerfi AB Stockholm Sweden

Similar Messages

How to import photos that have same date as existing photos in library?

I just received some photos from my dad that I've copied onto my mac, but am unable to import to iphoto. I get an error message that iphoto cannot create "/Users/haeyuonkim/Pictures/iPhoto Library/2006/05/23/FH020038.jpg"
I assume it is because there is already a folder with that exact date in the library.
Thanks in advance for any suggestions or work-arounds.

haeyounkim:
Welcome to the Apple Discussions. iPhoto will import files with the same date and even the same file name. Each new import goes into a new folder. From that message it appears that you're running iPhoto 5. Am I correct? Is so you should be posting in the iPhoto 5 forum were users with more recent V5 experience will be able to help you.
It may be a permissions issue. Download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administartive name in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
See if that will help.
Do you Twango?

I currently have one input but need to run two loops. I cannot get the two while loops to run so that they both pick up the same data, they are both picking up alternate samples. How can I get them to both pick up all of the values?

The system I am trying to create calculates a number of values based on an input. I need to make the calculations and display the values for an entire production run and for each hour. The only way I know to do this is to create two while loops, one looking at all the values that are received and one looking only at the values for hour long periods.
Any help would be great.
Thanks
RossH

Why do you think that you have to have two loops to accomplish this task? Why not use one loop and accumulate the same data into two data sets based on the two sets of criteria?

Can i back up to iphones on the same lap top with the same apple id? or do they each need their own apple id? Will it cause the data to mix or cause one to lose its data?

i have two iphones. can i back both phones up on the same lap top using the same apple ids? Or do they each need their own apple id? will it causere them to share data or lose data?

i have ipod touch 1g
iphone4
ipad2
syncing with my imac's itunes same appleid
different apps and different music and media
no problems
but imessage would go to all
& facetime between them is impossible

Need to create a new row in table with same data as Primary key, but new PK

Hello Gurus ,
I have a table with one column as primary key, I need to create a new row in the table, but with same data as in one of the rows, but with different primary key, in short a duplicate row with diferent primary key ..
Any ideas of how it can be done without much complication?
Thanks in advance for your reply.
Reards,
Swapneel Kale

user9970447 wrote:
Hello Gurus ,
I have a table with one column as primary key, I need to create a new row in the table, but with same data as in one of the rows, but with different primary key, in short a duplicate row with diferent primary key ..
Any ideas of how it can be done without much complication?
Thanks in advance for your reply.
Reards,
Swapneel Kalesomething like
insert into mytable values ('literal for new pk',
                                       select non-pk-1,
                                                non-pk-2,
                                                non-pk-n
                                       from mytable
                                       where pk-col = 'literal for existing pk')

Need to maintain same data in ECC and MDM

Hi ,
Could you please tel me why we need to maintain same data in MDM and ECC seperately.
Regards
Ramya

HI Ramyadixit,
It is important to understand that MDM and ERP do not replace eachother rather complement each other.
Using SAPu2019s ERP suite as the foundation technology for an MDM implementation is problematic because, despite all the positives of ERP, flexibility is usually not associated with SAP systems.
SAP ERP doesnu2019t offer the tools to manage master data in the ways required by todayu2019s complex organizations.SAP ERP isnu2019t designed for active management of critical master data. Specifically, SAPu2019s data matching capabilities are too basic. Its search functions might be good at u201Cexact matchu201D but they are not as strong at the kind of u201Cfuzzy searchingu201D that is so important in uncovering duplicate entries with subtle differences. For the same reason, users are far more likely to create new duplicate customer records in SAP, and thereu2019s no way to create a u201Cgolden copyu201D of master data for use across multiple heterogeneous systems, or to maintain survivorship rules for overlapping data from multiple systems.
These problems are all compounded when you have more than a single SAP instance, or different ERPs altogether, which is a very real occurrence within large corporations that have grown through mergers & acquisitions. Even without multiple ERP instances, most mid-size and larger national firms are likely to pull data from many different systems. In fact, 10 to 30 source systems is not uncommon, and heterogeneous environments are now the norm. The siloed approach to data management whereby customer-facing data is in one system, product data in another, asset data in a third, and so forth, really complicates the integration of processes, data and workflow.
A dedicated MDM hub provides a multitude of benefits not attainable with an SAP ERP-based master data approach. First, a dedicated MDM system is just that -- dedicated to delivering the best possible manageability of your master data across the enterprise, and not just within your ERP technology stack. The focus of any high-quality, enterprise-grade MDM hub implementation is going to be on getting master data right; creating a single source of truth, with each distinct customer, product, etc. represented only once in the hub. This means you can maintain accurate, complete, timely and consistent master data through both data governance and hub technology, with robust data quality and matching capabilities.
MDM and ERP need to coexist for instance as one solution does not replace the other. From an investment perspective, it is important to leverage existing technologies such as data quality, extract-transfer-load (ETL) and data integration tools, middleware, business process management and workflow.
To summarise, the top five reasons not to master your data in SAP ERP are:
1. SAP ERP isnu2019t flexible enough.
2. Master data is different and canu2019t be proactively managed within an SAP ERP system.
3. SAPu2019s ERP products werenu2019t designed for active management of master data.
4. Mastering data in an ERP system is much more difficult with more than one instance or when different ERPs are used together.
5. An MDM hub creates a workspace between an organizationu2019s transactional and analytic systems meaning they fix it once and then extend it for use in back office systems and the data warehouse.
Hope it helps!
Thanks,
Ravi

Need to reset page numbers for each layout which has same data

Hi Gurus,
I have an requriement to reset the page number from 1 for each layout in same template.
I know we can do this by @section when we have multiple header_id, but in my case, i have the same data that need to be shown in 3 different layouts under the same template.
So for the first layout it should start with 1 of 2, 2 of 2
Second layout should start with 1 of 2 , 2 of 2
Third layout should start with 1 of 2 , 2 of 2
Any help is highly appreciated.
Thanks,
Edited by: R on May 16, 2013 8:27 AM

Hello Everyone,
Appreciate if any clue about the mentioned requirement.

CBO generating different plans for the same data in similar Environments

Hi All
I have been trying to compare an SQL from 2 different but similar environments build of the same hardware specs .The issue I am facing is environment A, the query executes in less than 2 minutes with plan mostly showing full table scans and hash join whereas in environment B(problematic), it times out after 2 hours with an error of unable to extend table space . The statistics are up to date in both environments for both tables and indexes . System parameters are exactly similar(default oracle for except for multiblock_read_count ).
Both Environment have same db parameter for db_file_multiblock_read_count(16), optimizer(refer below),hash_area_size (131072),pga_aggregate_target(1G),db_block_size(8192) etc . SREADTIM, MREADTIM, CPUSPEED, MBRC are all null in aux_stats in both environment because workload was never collected i believe.
Attached is details about the SQL with table stats, SQL and index stats my main concern is CBO generating different plans for the similar data and statistics and same hardware and software specs. Is there any thing else I should consider .I generally see environment B being very slow and always plans tend to nested loops and index scan whereas what we really need is a sensible FTS in many cases. One of the very surprising thing is METER_CONFIG_HEADER below which has just 80 blocks of data is being asked for index scan.
show parameter optimizer
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
**Environment**
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE     10.2.0.4.0     Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Note: : There are slight difference in the no of records in the attached sheet.However, I wanted to tell that i have tested with exact same data and was getting similar results but I couldn't retain the data untill collecting the details in the attachment
TEST1     COMPARE TABLE LEVE STATS used by CBO
ENVIRONMENT A
TABLE_NAME     NUM_ROWS     BLOCKS     LAST_ANALYZED
ASSET     3607425     167760     5/02/2013 22:11
METER_CONFIG_HEADER     3658     80     5/01/2013 0:07
METER_CONFIG_ITEM     32310     496     5/01/2013 0:07
NMI     1899024     33557     18/02/2013 10:55
REGISTER     4830153     101504     18/02/2013 9:57
SDP_LOGICAL_ASSET     1607456     19137     18/02/2013 15:48
SDP_LOGICAL_REGISTER     5110781     78691     18/02/2013 9:56
SERVICE_DELIVERY_POINT     1425890     42468     18/02/2013 13:54
ENVIRONMENT B
TABLE_NAME     NUM_ROWS     BLOCKS     LAST_ANALYZED
ASSET     4133939     198570     16/02/2013 10:02
METER_CONFIG_HEADER     3779     80     16/02/2013 10:55
METER_CONFIG_ITEM     33720     510     16/02/2013 10:55
NMI     1969000     33113     16/02/2013 10:58
REGISTER     5837874     120104     16/02/2013 11:05
SDP_LOGICAL_ASSET     1788152     22325     16/02/2013 11:06
SDP_LOGICAL_REGISTER     6101934     91088     16/02/2013 11:07
SERVICE_DELIVERY_POINT     1447589     43804     16/02/2013 11:11
TEST ITEM 2     COMPARE INDEX STATS used by CBO
ENVIRONMENT A
TABLE_NAME     INDEX_NAME     UNIQUENESS     BLEVEL     LEAF_BLOCKS     DISTINCT_KEYS     AVG_LEAF_BLOCKS_PER_KEY     AVG_DATA_BLOCKS_PER_KEY     CLUSTERING_FACTOR     NUM_ROWS
ASSET     IDX_AST_DEVICE_CATEGORY_SK     NONUNIQUE     2     9878     67     147     12982     869801     3553095
ASSET     IDX_A_SAPINTLOGDEV_SK     NONUNIQUE     2     7291     2747     2     639     1755977     3597916
ASSET     SYS_C00102592     UNIQUE     2     12488     3733831     1     1     3726639     3733831
METER_CONFIG_HEADER     SYS_C0092052     UNIQUE     1     12     3670     1     1     3590     3670
METER_CONFIG_ITEM     SYS_C0092074     UNIQUE     1     104     32310     1     1     32132     32310
NMI     IDX_NMI_ID     NONUNIQUE     2     6298     844853     1     2     1964769     1965029
NMI     IDX_NMI_ID_NK     NONUNIQUE     2     6701     1923072     1     1     1922831     1923084
NMI     IDX_NMI_STATS     NONUNIQUE     1     106     4     26     52     211     211
REGISTER     REG_EFFECTIVE_DTM     NONUNIQUE     2     12498     795     15     2899     2304831     4711808
REGISTER     SYS_C00102653     UNIQUE     2     16942     5065660     1     1     5056855     5065660
SDP_LOGICAL_ASSET     IDX_SLA_SAPINTLOGDEV_SK     NONUNIQUE     2     3667     1607968     1     1     1607689     1607982
SDP_LOGICAL_ASSET     IDX_SLA_SDP_SK     NONUNIQUE     2     3811     668727     1     2     1606204     1607982
SDP_LOGICAL_ASSET     SYS_C00102665     UNIQUE     2     5116     1529606     1     1     1528136     1529606
SDP_LOGICAL_REGISTER     SYS_C00102677     UNIQUE     2     17370     5193638     1     1     5193623     5193638
SERVICE_DELIVERY_POINT     IDX_SDP_NMI_SK     NONUNIQUE     2     4406     676523     1     2     1423247     1425890
SERVICE_DELIVERY_POINT     IDX_SDP_SAP_INT_NMI_SK     NONUNIQUE     2     7374     676523     1     2     1458238     1461108
SERVICE_DELIVERY_POINT     SYS_C00102687     UNIQUE     2     4737     1416207     1     1     1415022     1416207
ENVIRONMENT B
TABLE_NAME     INDEX_NAME     UNIQUENESS     BLEVEL     LEAF_BLOCKS     DISTINCT_KEYS     AVG_LEAF_BLOCKS_PER_KEY     AVG_DATA_BLOCKS_PER_KEY     CLUSTERING_FACTOR     NUM_ROWS
ASSET     IDX_AST_DEVICE_CATEGORY_SK     NONUNIQUE     2     8606     121     71     16428     1987833     4162257
ASSET     IDX_A_SAPINTLOGDEV_SK     NONUNIQUE     2     8432     1780146     1     1     2048170     4162257
ASSET     SYS_C00116157     UNIQUE     2     13597     4162263     1     1     4158759     4162263
METER_CONFIG_HEADER     SYS_C00116570     UNIQUE     1     12     3779     1     1     3734     3779
METER_CONFIG_ITEM     SYS_C00116592     UNIQUE     1     107     33720     1     1     33459     33720
NMI     IDX_NMI_ID     NONUNIQUE     2     6319     683370     1     2     1970460     1971313
NMI     IDX_NMI_ID_NK     NONUNIQUE     2     6597     1971293     1     1     1970771     1971313
NMI     IDX_NMI_STATS     NONUNIQUE     1     98     48     2     4     196     196
REGISTER     REG_EFFECTIVE_DTM     NONUNIQUE     2     15615     1273     12     2109     2685924     5886582
REGISTER     SYS_C00116748     UNIQUE     2     19533     5886582     1     1     5845565     5886582
SDP_LOGICAL_ASSET     IDX_SLA_SAPINTLOGDEV_SK     NONUNIQUE     2     4111     1795084     1     1     1758441     1795130
SDP_LOGICAL_ASSET     IDX_SLA_SDP_SK     NONUNIQUE     2     4003     674249     1     2     1787987     1795130
SDP_LOGICAL_ASSET     SYS_C004520     UNIQUE     2     5864     1795130     1     1     1782147     1795130
SDP_LOGICAL_REGISTER     SYS_C004539     UNIQUE     2     20413     6152850     1     1     6073059     6152850
SERVICE_DELIVERY_POINT     IDX_SDP_NMI_SK     NONUNIQUE     2     3227     660649     1     2     1422572     1447803
SERVICE_DELIVERY_POINT     IDX_SDP_SAP_INT_NMI_SK     NONUNIQUE     2     6399     646257     1     2     1346948     1349993
SERVICE_DELIVERY_POINT     SYS_C00128706     UNIQUE     2     4643     1447946     1     1     1442796     1447946
TEST ITEM 3     COMPARE PLANS
ENVIRONMENT A
Plan hash value: 4109575732
| Id | Operation                       | Name                   | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|   1 | HASH UNIQUE                    |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|* 2 |   HASH JOIN                     |                        |    13 | 2067 |       |   135K (2)| 00:27:05 |
|* 3 |    HASH JOIN                    |                        |     6 |   900 |       |   135K (2)| 00:27:04 |
|* 4 |     HASH JOIN ANTI              |                        |     1 |   137 |       |   135K (2)| 00:27:03 |
|* 5 |      TABLE ACCESS BY INDEX ROWID| NMI                    |     1 |    22 |       |     5   (0)| 00:00:01 |
|   6 |       NESTED LOOPS              |                        |     1 |   131 |       | 95137   (2)| 00:19:02 |
|* 7 |        HASH JOIN                |                        |     1 |   109 |       | 95132   (2)| 00:19:02 |
|* 8 |         TABLE ACCESS FULL       | ASSET                  | 36074 | 1021K|       | 38553   (2)| 00:07:43 |
|* 9 |         HASH JOIN               |                        | 90361 | 7059K| 4040K| 56578   (2)| 00:11:19 |
|* 10 |          HASH JOIN              |                        | 52977 | 3414K| 2248K| 50654   (2)| 00:10:08 |
|* 11 |           HASH JOIN             |                        | 39674 | 1782K|       | 40101   (2)| 00:08:02 |
|* 12 |            TABLE ACCESS FULL    | REGISTER               | 39439 | 1232K|       | 22584   (2)| 00:04:32 |
|* 13 |            TABLE ACCESS FULL    | SDP_LOGICAL_REGISTER   | 4206K|    56M|       | 17490   (2)| 00:03:30 |
|* 14 |           TABLE ACCESS FULL     | SERVICE_DELIVERY_POINT |   675K|    12M|       | 9412   (2)| 00:01:53 |
|* 15 |          TABLE ACCESS FULL      | SDP_LOGICAL_ASSET      | 1178K|    15M|       | 4262   (2)| 00:00:52 |
|* 16 |        INDEX RANGE SCAN         | IDX_NMI_ID_NK          |     2 |       |       |     2   (0)| 00:00:01 |
| 17 |      VIEW                       |                        | 39674 |   232K|       | 40101   (2)| 00:08:02 |
|* 18 |       HASH JOIN                 |                        | 39674 | 1046K|       | 40101   (2)| 00:08:02 |
|* 19 |        TABLE ACCESS FULL        | REGISTER               | 39439 |   500K|       | 22584   (2)| 00:04:32 |
|* 20 |        TABLE ACCESS FULL        | SDP_LOGICAL_REGISTER   | 4206K|    56M|       | 17490   (2)| 00:03:30 |
|* 21 |     TABLE ACCESS FULL           | METER_CONFIG_HEADER    | 3658 | 47554 |       |    19   (0)| 00:00:01 |
|* 22 |    TABLE ACCESS FULL            | METER_CONFIG_ITEM      | 7590 | 68310 |       |   112   (2)| 00:00:02 |
Predicate Information (identified by operation id):
   2 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
   3 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
   4 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
   5 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
   7 - access("ASSET_CD"="EQUIP_CD" AND "SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
   8 - filter("ROW_CURRENT_IND"='Y')
   9 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
10 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
11 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
12 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='4' OR
              SUBSTR("REGISTER_ID_CD",1,1)='5' OR SUBSTR("REGISTER_ID_CD",1,1)='6') AND "ROW_CURRENT_IND"='Y')
13 - filter("ROW_CURRENT_IND"='Y')
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y')
16 - access("NMI_SK"="NMI_SK")
18 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
19 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='1' OR
              SUBSTR("REGISTER_ID_CD",1,1)='2' OR SUBSTR("REGISTER_ID_CD",1,1)='3') AND "ROW_CURRENT_IND"='Y')
20 - filter("ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
22 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
ENVIRONMENT B
Plan hash value: 2826260434
| Id | Operation                            | Name                   | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                     |                        |     1 |   181 |   103K (2)| 00:20:47 |
|   1 | HASH UNIQUE                         |                        |     1 |   181 |   103K (2)| 00:20:47 |
|* 2 |   HASH JOIN ANTI                     |                        |     1 |   181 |   103K (2)| 00:20:47 |
|* 3 |    HASH JOIN                         |                        |     1 |   176 | 56855   (2)| 00:11:23 |
|* 4 |     HASH JOIN                        |                        |     1 |   163 | 36577   (2)| 00:07:19 |
|* 5 |      TABLE ACCESS BY INDEX ROWID     | ASSET                  |     1 |    44 |     4   (0)| 00:00:01 |
|   6 |       NESTED LOOPS                   |                        |     1 |   131 | 9834   (2)| 00:01:59 |
|   7 |        NESTED LOOPS                  |                        |     1 |    87 | 9830   (2)| 00:01:58 |
|   8 |         NESTED LOOPS                 |                        |     1 |    74 | 9825   (2)| 00:01:58 |
|* 9 |          HASH JOIN                   |                        |     1 |    52 | 9820   (2)| 00:01:58 |
|* 10 |           TABLE ACCESS BY INDEX ROWID| METER_CONFIG_HEADER    |     1 |    14 |     1   (0)| 00:00:01 |
| 11 |            NESTED LOOPS              |                        |     1 |    33 |   116   (2)| 00:00:02 |
|* 12 |             TABLE ACCESS FULL        | METER_CONFIG_ITEM      |     1 |    19 |   115   (2)| 00:00:02 |
|* 13 |             INDEX RANGE SCAN         | SYS_C00116570          |     1 |       |     1   (0)| 00:00:01 |
|* 14 |           TABLE ACCESS FULL          | SERVICE_DELIVERY_POINT |   723K|    13M| 9699   (2)| 00:01:57 |
|* 15 |          TABLE ACCESS BY INDEX ROWID | NMI                    |     1 |    22 |     5   (0)| 00:00:01 |
|* 16 |           INDEX RANGE SCAN           | IDX_NMI_ID_NK          |     2 |       |     2   (0)| 00:00:01 |
|* 17 |         TABLE ACCESS BY INDEX ROWID | SDP_LOGICAL_ASSET      |     1 |    13 |     5   (0)| 00:00:01 |
|* 18 |          INDEX RANGE SCAN            | IDX_SLA_SDP_SK         |     2 |       |     2   (0)| 00:00:01 |
|* 19 |        INDEX RANGE SCAN              | IDX_A_SAPINTLOGDEV_SK |     2 |       |     2   (0)| 00:00:01 |
|* 20 |      TABLE ACCESS FULL               | REGISTER               | 76113 | 2378K| 26743   (2)| 00:05:21 |
|* 21 |     TABLE ACCESS FULL                | SDP_LOGICAL_REGISTER   | 5095K|    63M| 20245   (2)| 00:04:03 |
| 22 |    VIEW                              |                        | 90889 |   443K| 47021   (2)| 00:09:25 |
|* 23 |     HASH JOIN                        |                        | 90889 | 2307K| 47021   (2)| 00:09:25 |
|* 24 |      TABLE ACCESS FULL               | REGISTER               | 76113 |   966K| 26743   (2)| 00:05:21 |
|* 25 |      TABLE ACCESS FULL               | SDP_LOGICAL_REGISTER   | 5095K|    63M| 20245   (2)| 00:04:03 |
Predicate Information (identified by operation id):
   2 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
   3 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK" AND
              "SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
   4 - access("ASSET_CD"="EQUIP_CD")
   5 - filter("ROW_CURRENT_IND"='Y')
   9 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
10 - filter("ROW_CURRENT_IND"='Y')
12 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
13 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
16 - access("NMI_SK"="NMI_SK")
17 - filter("ROW_CURRENT_IND"='Y')
18 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
19 - access("SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
20 - filter((SUBSTR("REGISTER_ID_CD",1,1)='4' OR SUBSTR("REGISTER_ID_CD",1,1)='5' OR
              SUBSTR("REGISTER_ID_CD",1,1)='6') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
23 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
24 - filter((SUBSTR("REGISTER_ID_CD",1,1)='1' OR SUBSTR("REGISTER_ID_CD",1,1)='2' OR
              SUBSTR("REGISTER_ID_CD",1,1)='3') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
25 - filter("ROW_CURRENT_IND"='Y')Edited by: abhilash173 on Feb 24, 2013 9:16 PM
Edited by: abhilash173 on Feb 24, 2013 9:18 PM

Hi Paul,
I misread your question initially .The system stats are outdated in both ( same result as seen from aux_stats) .I am not a DBA and do not have access to gather system stats fresh.
select * from sys.aux_stats$
SNAME     PNAME     PVAL1     PVAL2
SYSSTATS_INFO     STATUS     NULL     COMPLETED
SYSSTATS_INFO     DSTART     NULL     02-16-2011 15:24
SYSSTATS_INFO     DSTOP     NULL     02-16-2011 15:24
SYSSTATS_INFO     FLAGS     1     NULL
SYSSTATS_MAIN     CPUSPEEDNW     1321.20523     NULL
SYSSTATS_MAIN     IOSEEKTIM     10     NULL
SYSSTATS_MAIN     IOTFRSPEED     4096     NULL
SYSSTATS_MAIN     SREADTIM     NULL     NULL
SYSSTATS_MAIN     MREADTIM     NULL     NULL
SYSSTATS_MAIN     CPUSPEED     NULL     NULL
SYSSTATS_MAIN     MBRC     NULL     NULL
SYSSTATS_MAIN     MAXTHR     NULL     NULL
SYSSTATS_MAIN     SLAVETHR     NULL     NULL

Multiple repeating SubForms binding to the same data node

Having multiple repeating SubForms binding to the same data node : In our documents, many times we need to display information from same table in multiple locations. For example, if document displays information of Insureds on one page and information of drivers on another page, we need to create a LiveCycle document with two SubForms. Each SubForm needs to have a repeating binding to CommonInsured element in XSD. LiveCycle Designer is not able to handle such case. We cannot have two subforms bound to the same node, ONLY in a case where repeating option is selected for data binding.
The only way I have found out is the following Javascript
//Get the data node from XML. You will find the code for this function in //JavaHelperFunctions library.
// InsuredDataRepeatingSubForm is a second subform.
//You need to manually add instances to this subform at the
//runtime and Insured data to each instance.
var insuArray = JavaHelperFunctions.getInsureds();
    var i=0;
    for( i=0; i<insuArray.length; i++)
       if (i>0)
var thesubform = this.InsuredDataRepeatingSubForm.instanceManager.addInstance(i);
              thesubform.InsuredName.rawValue = insuArray[i].fullName.value;
       else
               this.InsuredDataRepeatingSubForm.InsuredName.rawValue = insuArray[i].fullName.value;
Is there any way I can achieve directly using bindings since we are trying to minimize javascript that changes the layout of the form?
Thanks in advance!

Unfortunately not. I've spent countless hours/days trying to do the same thing. You have to use code. The form consumes all the data it can into the repeating elements until there is none left and it is not reused.
Here's a function I wrote just for that purpose. Feel free to use it:
function loadData(source,target){
target.setInstances(source.count);//set the target's subform instances to match the source's
for (var a=0;a<source.count;a++){//loop through each subform instance
var sourceSubform=source.resolveNode(source.name.substr(1)).all.item(a);
var targetSubform=target.resolveNode(target.name.substr(1)).all.item(a);
for (var b=0;b<sourceSubform.nodes.length;b++){//loop through the children of each
   if (sourceSubform.nodes.item(b).className=="field" && targetSubform.resolveNode(sourceSubform.nodes.item(b).name)!=null)//check for matching fields
    if (typeof(targetSubform.resolveNode(sourceSubform.nodes.item(b).name).value.exData)=="undefined" ||
     typeof(targetSubform.resolveNode(sourceSubform.nodes.item(b).name).value.exData.body)=="undefined")
     targetSubform.resolveNode(sourceSubform.nodes.item(b).name).rawValue=sourceSubform.nodes.item(b).rawValue;
    else
     targetSubform.resolveNode(sourceSubform.nodes.item(b).name).value.exData.loadXML(sourceSubform.nodes.item(b).value.exData.saveXML(),1,1);
   if (sourceSubform.nodes.item(b).className=="instanceManager" && targetSubform.resolveNode(sourceSubform.nodes.item(b).name)!=null)//check for matching subforms
    loadData(sourceSubform.nodes.item(b),targetSubform.resolveNode(sourceSubform.nodes.item(b).name));
Just make sure the source and target subform hierarchies are identifal, same name and all. It will recurse down the tree and transfer source fields (rich text and plain) to their sister targets.
Kyle

Metadata: how to use same data on multiple tracks in a project.

I need to figure out how to cut and paste metadata from one audio file to the next. I am transferring 500 vinyl albums to digital. I would like to be able to fill in the ID3 and other metadata that is the same for the 10 to 12 songs on the disk and have that information transfer to each of the files I ultimately turn into mp3. How can I do that. Essentially, artist, album, recording data, comments, genre, and copyright are all the same.
My workflow is to copy all of the tracks from the master recording of the disk into individual audio files and save those as the MP3. If I enter metadata manually in the audio track, it is saved with the MP3 and read by iTunes when converted. However, I want to be able to create one metadata -- I guess template -- with the data that is the same and have that automatically transferred from the master to the cuts.
Is it possible?

Not in Audition, I'm afraid. But there's certainly software that will allow extensive metadata manipulation of ID3 tags available, possibly for just the reasons you are mentioning. You have to bear in mind that Audition is essentially an editor, and MP3s are just a saving possibility, and not the format it natively works in, so it's not extensively set up to deal with them in the way you want; not it's job, really!

How do I set all photos in a project to the same date (rather than simply time-shifting)?

I have a bunch of old scanned photos in Aperture (current version - 3.5.1), and am trying to tidy up the metadata, especially the dates.
This is turning out to be quite a task, as the date gaps between scans are all over the place. For example, in one project I might have photos scanned between 2004 and 2007 that all took place on one day in 1999.
This means the native "adjust date and time" function in the metadata menu doesn't work, as it is a little too clever in its timeshifting. If I highliht the whole project and change it all to 1 June 1999, the 2004 shots get changed to that date but the 2007 scans are dated 2002, with Aperture "cleverly" preserving the inaccurate three year gap in the original scans' metadata.
This is making the process of fixing my data far more arduous than it needs to be.
I feel like my situation can't be that unusual, and their must be a way to override this behaviour. I'm not fussy about preserving logical time gaps between shots but I'd like them to have the right year and month (so a "dumb" solution that gave them all idntical date and times would be fine).
Can anayone help? Thanks in advance!

What is your Aperture version?
If it is compatible with iPhoto, open the Aperture library in iPhoto and use iPhoto's Batch Change to adjust the date of your scans: (File > Open Library in iPhoto)
In iPhoto select the photos in the event and go to the main menu bar:
Photos > Batch Change > Set Date:
Select the initial date and time of your photos and a very small gap, e.g. 1 second. All photos will set to the same date, stepped by one second to preserve their time order.
Afterwards switch back to Aperture using "File > Open Library in Aperture).
this works very well with Aperture 3.5.1 and iPhoto 9.5.1.
-- Léonie

Help to fill BPS Cube with same data in a Cube with these conditions

Hi,
I need some help in implementing BPS in a small project. (Integrated Planning is not available).
An existing cube, Cube1 has: Year/month, Year, char1, char2, keyfig1, keyfig2
Keyfig1 is filled directly from R3 with actuals; keyfig2 (planned values) is filled manually filled with a monthly flat file load.
Now, there is a change in direction to fill keyfig2 through BPS features and bring in additional key figures all based on keyfig1.
Cube2 has been created only for the purpose of this BPS project. Cube2 was a copy of Cube1(with no data). For Cube1, I have created a Planningarea1 and PlanningLevel1; and for Cube2, Planningarea2 and PlanningLevel2 in BPS0.
How do I fill the BPS Cube2 with the same data as in BPS Cube1 with the following conditions:
keyfig1 : same as source value from R3 (not modifiable)
keyfig2 : modifiable by users only on the first and second of the month.
keyfig3 : keyfig1 * 1.1
keyfig4 : keyfig1 of previous Year/month
keyfig5 : same as source value from R3 (But modifiable)
keyfig6 : same as keyfig5 as of last day of 20th of the current month (not modifiable)
The goal is to create a multi planning area to join the two cubes. Hints all that will also be appreciated.
Thanks

Your thought of having a multi area is right.
Create a multi area and being the basic areas to which you have assigned cube 1 and cube 2 underneath the multi area.
UNder your planing package, create a function of type Formula and create a parameter set like this:
= * 1.1.
Just this one line will is enough.
TO get keyfig 4 as previous month's key fig; you need another fox. To do this, you need to have a BPS variable to et previous month and use this variable in the parameter set.
Your fox will be like this.
DATA CURRMONTN TYPE 0CALMONTH.
DATA PREMONTH TYPE 0CALMONTH.
{KEYFIG4, CURRMONTH} = {KEYFIG1, PREMONTH}.
To make users modify only on days 1 and 2, you need to define a dara slice.
Ravi Thothadri

I have a macPro 10.6.8. i have been receiving mail with the same date--March 14 and the same time--8:51am..I cannot correct:who knows the solution?

I have a macPro 10.6.8. i have been receiving mail with the same date--March 14 and the same time--8:51am..I cannot correct:who knows the solution?
Thank you.

You may need to replace the Pram battery.

VBA:comboboxes to present same date in different formats...ADAPT WITH CHANGE IN DATE

Hi all,
I'm very new to VBA and excel development, so please take that into consideration as you read on.
I'm trying to create a work form for a database that (should) collect various information in comboboxes, including the date, the weekday, and the month... Note: most of the time, the data will be inserted the day after it's been collected. So, I wanted to create
one combobox for the date, one for the weekday, and one for the month, because I want columns for each of these in the database (If this is not necessary/efficient, please help! :) ) .
Here's what I've got so far:
'worksheet setup
Dim ws As Worksheet
Set ws = Worksheets("LookupList")
'Date dropdown setup
Dim cDateToday As Range
For Each cDateToday In ws.Range("DateList")
With Me.cboDate
.AddItem cDateToday.Value
End With
Next cDateToday
'If today is Monday, then set date to last friday, if any other weekday, set it to day before that
If Weekday(Date - 1) <> 2 Then
Me.cboDate.Value = Format(DateAdd("D", -Weekday(Date) - 1, Date), "Medium Date")
Else
Me.cboDate.Value = Format(Date - 1, "Medium Date")
End If
Problem #1: Right now, I am getting the date values from the list
DateList in the worksheet LookupList...is there a better way of doing this?
Problem #2: When the user form is run, the correct date and format shows up. However, if I change the date, the dropdown list in the combobox starts from the initial date in given list...is there anyway to bring the list closer to the current
date? Think Calendar View
Problem #3: I want the weekday and month values to be directly correlated to the date value discussed above, so hypothetically when the user form is run the correct date, weekday, and month all show up (based on the same date value), then if
I change the date, the weekday and month automatically update. Is this possible, if so how?
The reason I want this functionality is so that on a Monday, I can run the work form and it will automatically have Friday's date, weekday, month info as it opens. When I'm done with Friday, I can run it again, switch the date to the Saturday's
date (weekday and month automatically update), then repeat for Sunday.
I have tried running the same code for the weekday and month as I have for the date, and they work
until the date is changed. Once the date is changed, I have to manually change the weekday, which leads to format change, and same for month, which all leads to :( and confusion
Again, I am very new to vba and don't know much about it all and appreciate any/all help!
Thanks in advance!
/Alex

I can give you a little advice but I don't understand your comment "if I change the date, the weekday and month automatically update" Where do you want them to update?
I am assuming that your entire question is referring to a Userform with the Combobox. Is this correct?
The code can be much simpler to populate the combobox list. You already have a named range for the Dates so you can use that directly to populate the RowSource. (RowSource if the combox is on a Userform or ListFillRange for a combobox on a worksheet).
Then the WorksheetFunction Workday can be used to get the previous workday without weekend days. It also looks after the previous day when the actual date is mid week. Look up the function on the worksheet Help because you can also have a separate list
of holidays that will be excluded like weekend days.
If you are new to VBA then a tip about Help. You need to be on the worksheet and click Help to get worksheet help and in the VBA editor you click Help to call the VBA help. Don't just select Help off the taskbar when changing between the worksheet and VBA
because you will finish up with the incorrect Help file.
Example of code to assign a named range to the RowSource of a ComboBox. Named range needs to be Global and not scoped to a worksheet otherwise the worksheet name is also required.
    Me.cboDate.RowSource = "DateList"
Example of code to assign the previous workday to the combobox value.
    'Following line sets value to previous workday (Mon to Friday)
    Me.cboDate.Value = WorksheetFunction.WorkDay(Date, -1)
Then there is another problem with ComboBoxes and dates. If the Dates are real dates on the worksheet (Not Text) then the dropdown list displays in the same format as the worksheet but when the date is selected, it displays as a serial number. This
can also be rectified with code but first I need to know what the format of the data is on the worksheet.
Can you upload a copy of your workbook because it is like a picture is worth a thousand words. Same goes for having a copy of the workbook. If it has sensitive data then create a copy and remove the sensitive data.
Regards, OssieMac

How to load member for "sales same date last year"?

I need to load a member in Measures named "PriorYrSales" with "Sales" for the same date last year as today's date. Thus, retrieving "PriorYrSales" for 2/10/2002 would return the sales amount for 2/10/2001. Since days roll-up to months, quarters, years, it would be easy to determine how we're doing compared to the same time last year.Data is loaded each day for a date range from the current date and the preceding x days. Substitution variables are available for the beginning and ending date and the same dates for last year.For example: Data is loaded from beginning date of 2/01/2002 through ending date of 2/10/2002.The prior year date variables contain 2/01/2001 and 2/10/2001.The time period dimension is as follows:FY01->Jan2001-->01012001 (Alias: 1/01/2001)-->01022001 (Alias: 1/02/2001)-->all the dates in Jan->Feb2001-->02012001 (Alias: 2/01/2001)-->02022001 (Alias: 2/02/2001)-->all the dates in Febetc.FY02->Jan2002-->01012002 (Alias: 1/01/2002)-->01022002 (Alias: 1/02/2002)-->all the dates in Jan->Feb2002-->02012002 (Alias: 2/01/2002) -->02022002 (Alias: 2/01/2002)-->all the dates in Febetc.Thanks your any and all suggestions.Phil

Perhaps I wasn't clear in the first post. The intent is to easily compare sales for a current date/period to the same date/period last year. Neither Excel nor Analyzer provide a method that I'm aware of to retrieve data as follows:-------------------------------------Period Sales PriorYrSales Diff4/15/2002 1,000 900 100-------------------------------------(900 is sales for 4/15/2001)(100 is the calculated difference.)Nor can I do this:-------------------------------------Period Sales Period Sales Diff4/15/2002 1,000 4/15/2001 900 100-------------------------------------What Excel and Analyzer do allow is:-------------------------------------Period Sales 4/15/2002 1,0004/15/2001 900-------------------------------------I readily acknowledge that the data is redundant but I can't think of another option that will allow Excel and Analyzer to easily retrieve the values for comparison. If the PriorYrSales member can be loaded then the users can compare years, quarters, months and days quite easily.My challenge is knowing how use a calc script to derive prior year dates that correspond to current year dates. Something like:PriorYrSales->04152002 = Sales->04152001I've considered arrays but I've never used them and the documentation is not helpful enough for me.Thanks for your response.Phil

NOTHING_PROVIDES_DEP: suse-sam-data needed by suse-sam-0.8.1-0.1.1.noarch

Similar Messages

Maybe you are looking for