Nothing works in SQL Developer 1.2
I have been using SQL Developer for quite a long time, and never had any issues - until I downloaded version 1.2. Note, I did not do an upgrade and I did not do a migration from an earlier version. This is a clean install on SQL Developer 1.2 with bundled JRE.
After I connect to a database I can write SQL statements and get a result. The problems starts if I use the object browser.
1. Expand Table results in:
ava.lang.NullPointerException
at java.lang.System.arraycopy(Native Method)
at oracle.net.ns.DataPacket.putDataInBuffer(Unknown Source)
at oracle.net.ns.NetOutputStream.write(Unknown Source)
at oracle.jdbc.driver.T4CMAREngine.marshalCLR(T4CMAREngine.java:700)
at oracle.jdbc.driver.T4CTTIrxd.marshal(T4CTTIrxd.java:534)
at oracle.jdbc.driver.T4C8Oall.marshalBinds(T4C8Oall.java:1499)
at oracle.jdbc.driver.T4C8Oall.marshalAll(T4C8Oall.java:972)
at oracle.jdbc.driver.T4C8Oall.marshal(T4C8Oall.java:421)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:201)
at oracle.jdbc.driver.T4CCallableStatement.executeForDescribe(T4CCallableStatement.java:798)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1036)
at oracle.jdbc.driver.T4CCallableStatement.executeMaybeDescribe(T4CCallableStatement.java:838)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1131)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3325)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3370)
at oracle.dbtools.db.DBUtil.executeOracleQuery(DBUtil.java:472)
at oracle.dbtools.db.DBUtil.executeQuery(DBUtil.java:498)
at oracle.dbtools.raptor.navigator.ObjectQueryInstance.executeQuery(ObjectQueryInstance.java:73)
at oracle.dbtools.raptor.navigator.xml.XmlFolderInstance.getChildren(XmlFolderInstance.java:121)
at oracle.dbtools.raptor.navigator.xml.XmlFolderInstance.listChildren(XmlFolderInstance.java:67)
at oracle.dbtools.raptor.navigator.ObjectFilter$1Loader.doWork(ObjectFilter.java:144)
at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:553)
at java.lang.Thread.run(Thread.java:595)
2. Expand Indexes results in:
ORA-01460 00000 unimplemented or unreasonable conversion requested
3. Expand Package, Function, Procedures, Triggers or Types and nothing happens even though I have my schema own such objects.
4. All the other objects in the object browser reports the same errors as listed above. The only thing that works is the Public Synonyms.
5. If I encounter any of the above errors I am not able to use the SQL worksheet properly any longer. Any queries (even SELECT * FROM dual) shows nothing in the results window and the status bar says "All rows fetched: 0"
Help! I miss SQL Developer. Now I am stucked with Toad :/
Help -> About -> Properties says:
"XML Editing Framework IDE Extension oracle.ide.xmlef 11.1.1.0.11.41.91 Missing dependencies: oracle.ide.daf, oracle.ide.palette2"
But I don't think this is the root cause since this is a clean install, so every download of SQLDeveloper probably miss these dependencies.
I am pasting my enviroment from Help -> About -> Properties if it helps:
apple.laf.useScreenMenuBar true
awt.toolkit sun.awt.windows.WToolkit
class.load.environment oracle.ide.boot.IdeClassLoadEnvironment
class.transfer delegate
com.apple.macos.smallTabs true
com.apple.mrj.application.apple.menu.about.name "SQL_Developer"
com.apple.mrj.application.growbox.intrudes false
file.encoding Cp1252
file.encoding.pkg sun.io
file.separator \
ice.browser.forcegc false
ice.pilots.html4.tileOptThreshold 0
ide.AssertTracingDisabled true
ide.conf C:\app\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.config_pathname C:\app\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.extension.search.path sqldeveloper/extensions:jdev/extensions:ide/extensions
ide.launcherProcessId 5960
ide.main.class oracle.ide.boot.IdeLauncher
ide.patches.dir ide/lib/patches
ide.pref.dir.base C:\Documents and Settings\wmaunes\Application Data
ide.product oracle.sqldeveloper
ide.shell.enableFileTypeAssociation C:\app\sqldeveloper\sqldeveloper.exe
ide.splash.screen splash.gif
ide.startingArg0 C:\app\sqldeveloper\sqldeveloper.exe
ide.startingcwd C:\app\sqldeveloper
ide.update.masterserver http://www.oracle.com/technology/software/products/sql/master.xml
ide.user.dir.var IDE_USER_DIR
ide.work.dir.base D:\Data\Dokumenter
java.awt.graphicsenv sun.awt.Win32GraphicsEnvironment
java.awt.printerjob sun.awt.windows.WPrinterJob
java.class.path ..\..\ide\lib\ide-boot.jar;..\..\jdev\lib\xmleditor.jar;..\..\ide\lib\oicons.jar;..\..\jlib\jewt4.jar;..\..\jlib\share.jar;..\ide\jlib\xmlef.jar;..\..\sqldeveloper\lib\jle2.jar;..\..\sqldeveloper\lib\oracle.dbtools.logging.jar
java.class.version 49.0
java.endorsed.dirs C:\app\sqldeveloper\jdk\jre\lib\endorsed
java.ext.dirs C:\app\sqldeveloper\jdk\jre\lib\ext
java.home C:\app\sqldeveloper\jdk\jre
java.io.tmpdir C:\DOCUME~1\wmaunes\LOCALS~1\Temp\
java.library.path C:\app\sqldeveloper;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\PC Connectivity Solution\;D:\oracle\product\10.1.3\fusion\jdk\bin;D:\oracle\product\10.1.3\fusion\ant\bin;D:\oracle\product\10.1.2\oas\bin;D:\oracle\product\10.1.2\oas\jlib;D:\oracle\product\10.2.0\db_1\bin;C:\java\jdk1.5.0_08\bin;C:\app\Perl\bin\;C:\app\unxutils\usr\local\wbin;C:\Program Files\ThinkPad\Utilities;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\Wireless\Bin\;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\Diskeeper Corporation\Diskeeper\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\Common Files\Lenovo;C:\Program Files\Lenovo\Client Security Solution;C:\Program Files\IDM Computer Solutions\UltraEdit-32;C:\Program Files\ZipGenius 6\;C:\Program Files\Perforce;C:\Program Files\Common Files\GTK\2.0\bin;C:\Program Files\QuickTime\QTSystem\;D:\oracle\product\10.1.3\fusion\MOBILE\sdk\bin;C:\app\ant\bin
java.naming.factory.initial oracle.javatools.jndi.LocalInitialContextFactory
java.runtime.name Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version 1.5.0_06-b05
java.specification.name Java Platform API Specification
java.specification.vendor Sun Microsystems Inc.
java.specification.version 1.5
java.util.logging.config.file logging.conf
java.vendor Sun Microsystems Inc.
java.vendor.url http://java.sun.com/
java.vendor.url.bug http://java.sun.com/cgi-bin/bugreport.cgi
java.version 1.5.0_06
java.vm.info mixed mode
java.vm.name Java HotSpot(TM) Client VM
java.vm.specification.name Java Virtual Machine Specification
java.vm.specification.vendor Sun Microsystems Inc.
java.vm.specification.version 1.0
java.vm.vendor Sun Microsystems Inc.
java.vm.version 1.5.0_06-b05
jdbc.driver.home /D:/oracle/product/10.2.0/db_1/
jdbc.library /D:/oracle/product/10.2.0/db_1/jdbc/lib/ojdbc14.jar
line.separator \r\n
oracle.home C:\app\sqldeveloper
oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG true
oracle.jdbc.Trace true
oracle.translated.locales ja
oracle.xdkjava.compatibility.version 9.0.4
orai18n.library /D:/oracle/product/10.2.0/db_1/jlib/orai18n.jar
os.arch x86
os.name Windows XP
os.version 5.1
path.separator ;
reserved_filenames con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
set.main.as.system.loader true
sun.arch.data.model 32
sun.boot.class.path C:\app\sqldeveloper\jdk\jre\lib\rt.jar;C:\app\sqldeveloper\jdk\jre\lib\i18n.jar;C:\app\sqldeveloper\jdk\jre\lib\sunrsasign.jar;C:\app\sqldeveloper\jdk\jre\lib\jsse.jar;C:\app\sqldeveloper\jdk\jre\lib\jce.jar;C:\app\sqldeveloper\jdk\jre\lib\charsets.jar;C:\app\sqldeveloper\jdk\jre\classes
sun.boot.library.path C:\app\sqldeveloper\jdk\jre\bin
sun.cpu.endian little
sun.cpu.isalist pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
sun.desktop windows
sun.io.unicode.encoding UnicodeLittle
sun.java2d.ddoffscreen false
sun.jnu.encoding Cp1252
sun.management.compiler HotSpot Client Compiler
sun.os.patch.level Service Pack 2
user.country US
user.dir C:\app\sqldeveloper\sqldeveloper\bin
user.home C:\Documents and Settings\wmaunes
user.language en
user.name WMAUNES
user.timezone Europe/Paris
user.variant
windows.shell.font.languages
Similar Messages
-
All of a sudden my Enter key no longer works in SQL Developer.
All of a sudden my Enter key no longer works in SQL Developer. I don't know how I managed to disabled it. Can anyone tell me how to re-enable it?
I already tried the following:
- I closed the application and re-opened it. - It didn't work
- I re-started my machine. I didn't work
Help! Thank youThe same thing has just happened to me and this was very useful to correct the problem --- but now I am wondering why or how this happened. To the best of my knowledge, I haven't make any setting changes so why did I lose the Enter action?
-
this photo illustrate how that (Substitution Variables) not working in "SQL Developer" Environment :-
http://www.imagehosting.com/show.php/1555180_ddddd.PNG.html
any solve for this problem ?????!!!!!!!!!!There is a dedicated forum for SQL Developer related questions
SQL Developer
I should admit however, that query you have provided ( with substitution variables) works like a charme in my environment (SQL Developer 1.1.0.23 build 23.64)
Best regards
Maxim -
File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13
File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
ThanksI hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print -
Enter key doesnt work in SQL developer
enter key doesnt work in sql developer so cant creat new line in code.
enter key works fine when use word etc
Can I fix this in the SQL developer settings somewhere.?
thanks in advance.Hi Sue,
Just to let you know, your solution worked... My SQL Developer got into a state again where the backspace key stopped working... doing 'load preset, default' on the accelerators did fix it. Strange, because I don't use/configure the accelerators at all. Thanks for that, and hopefully this will be permanently fixed in the next version.
To echo what I think someone else was trying to say... I also have the issue that sql developer will 'lock up' or get bogged down sometimes, when i'm just typing away in the worksheet. Any keystrokes I entered in though will always get entered into the worksheet, once sqldeveloper 'unfreezes' itself. Of course, this issue is an annoyance factor only (little bit of impact on productivity though), but hopefully it gets fixed as well. -
Working on SQL Developer / pl/sql developer without installing Oracle
HI,
I am working on SQL Developer tool without installing oracle into my local machine.
I just took server IP as hostname and continuing with the same/
Now, since I donot have tns names, I am not able to use any other user other than my work related.
like scott etc.
could anyone let me know, is there any way that i can work on sql developer or pl/sql developer without installing oracle into local machine
like using scott etc...
for testing and learning purpose of self code.
thanks in advance.VBSK wrote:
I am working on SQL Developer tool without installing oracle into my local machine. You need an Oracle client driver - this is mandatory.
No, you do not need a TNS alias (as the connection string can be build manually by the application and the driver).
So SQL*Developer needs to have an OCI (Oracle Call Interface) client driver. This can be "installed" using Oracle Instant Client.
Instant Client does not really install - to use it takes 3 basic steps:
- download it (zip file)
- unzip it to a directory (e.g. C:\InstantClient on Windows)
- add to your Windows User's environment an ORACLE_HOME variable that points to this directory
These steps should suffice in making the driver in in Instant Client available to Oracle applications. (works for me running an Oracle OCI client like <i>Mumbai</i> or Oracle's <i>SQL Data Modeler</i>).
If you want a tnsnames.ora file, then create the file and create a new environment variable called TNS_ADMIN that refers to directory location of the file. It can use the same location as your Instant Client directory.
PS. I assume you have an existing Oracle server to connect to. -
I suspect work of SQL Developer after connect
what want about work of SQL Developer after connect ?
Thank you very muchNot really my area, and not really a SQL Developer question, but it's using a standard Java SQL connection in this case.
If you do not supply the DNS suffix (perhaps as a suffix to the host or service name), then it must get it from somewhere, probably some OS configuration. For example, on Win XP, I see this from a Cmd console window...
ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : <myhostname>
Primary Dns Suffix . . . . . . . : us.oracle.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : us.oracle.com
...Hope that helps (and corrections welcome),
Gary -
Code insight not working in sql developer 1.1.0.23
i just downloaded today. insight options all checked in preferences section. popup time set to less than a second. i get nothing to work in sql worksheet or while modifying a package body.
Hello,
You should see things from this side sometimes ;-) It's a small team, working hard, very focused! Yes, there is indeed a sense of urgency and we are testing a patch SQL Developer 1.1 at the moment. There is always the battle between wanting to get an updated release to you, the community, quickly, and delaying to ensure what you get is good.
Code insight, performance and many other issues have been addressed in this patch.
As for your other point, we want the tool to be lightweight, easy to install, easy to use with a clear user interface. Perhaps there'll be a new battle when adding features, but that's the goal.
Regards
Sue -
P/SQL Not Working in SQL Developer
The following P/SQL seems to work fine in SQL Plus but does not run in SQL Developer
insert /*+ append */ into upl_exclude_claims
(select /*+ ordered parallel(s,4) parallel(claim,4) */
/*+ use_hash(s,claim) no_index(claim, xbm_clm_recip) */
s.recip,
s.month_1st_day
from lrx.upl s,
mcd.fact claim;
Thanks911105 wrote:
The following P/SQL seems to work fine in SQL Plus but does not run in SQL Developer
insert /*+ append */ into upl_exclude_claims
(select /*+ ordered parallel(s,4) parallel(claim,4) */
/*+ use_hash(s,claim) no_index(claim, xbm_clm_recip) */
s.recip,
s.month_1st_day
from lrx.upl s,
mcd.fact claim;
ThanksWhat happens when you run it? Do you get an error or does nothing happen?
If you get an error post the message
Why didn't the first answer I did to this question post??? -
Some keys don´t work in SQL Developer 1.2
SQL Developer 1.2.
In SQL Worksheet the following keys don't work: space, backspace, start, end and enter.Hi hzapata, I know that it work fine, after Load preset, but why You lost the default configs?
Is this my question to Smit. -
Query works in SQL Developer but not in APEX
The query below runs fine in SQL Developer. I have tried entering it both as a Report Region based on SQL Query and in a Dynamic PL/SQL Region. I get different error messages in each. In the Dynamic PL/SQL Region I get the error that an INTO clause is expected in the select
statement. When I place it in a Report based on SQL query I get an error that there is an invalid column and to use column alias. What I am attempting to do is add the first query result to the second query result.
Select (select count(lead_id) from t3_leads
WHERE
t3_leads.market_id = 'Gurnee'
AND (T3_Leads.Last_Campaign = 'Hand Addressed' OR T3_Leads.Last_Campaign is null)
AND
((TRUNC(sysdate) - TRUNC(T3_Leads.LAST_MAILED_DATE)) > 60
OR T3_Leads.Last_Mailed_Date is null))
+
(select count(lead_id)from t3_leads where zip in (select zip from t3_overlap where t3_leads.zip = t3_overlap.zip)
and
market_id <> 'Gurnee'
and ((TRUNC(sysdate) - TRUNC(T3_Leads.LAST_MAILED_DATE)) > 60
OR T3_Leads.Last_Mailed_Date is null))
from dualHi,
you need a column alias for your "result" before the final 'from dual':
Select (select count(lead_id) from t3_leads
WHERE
t3_leads.market_id = 'Gurnee'
AND (T3_Leads.Last_Campaign = 'Hand Addressed' OR T3_Leads.Last_Campaign is null)
AND
((TRUNC(sysdate) - TRUNC(T3_Leads.LAST_MAILED_DATE)) > 60
OR T3_Leads.Last_Mailed_Date is null))
+
(select count(lead_id)from t3_leads where zip in (select zip from t3_overlap where t3_leads.zip = t3_overlap.zip)
and
market_id 'Gurnee'
and ((TRUNC(sysdate) - TRUNC(T3_Leads.LAST_MAILED_DATE)) > 60
OR T3_Leads.Last_Mailed_Date is null)) result
from dualPlease let me know if this works.
Thanks
Sandro -
Why does the query work in SQL Developer, but not in APEX?
Hi, guys:
I have a silly question. I have a complicated query, and I tested it successfully with SQL developer, and result is correct. However, when I put it into APEX to generate a report, it always reports no data found. I also know the condition related to "other marks" select list in the where clause part causes this problem. It also looks strange: before I add this condition, everything works OK; after I add this condition, even I do not choose the "other marks" select list, other components do not work neither. I always got no data found result. Could anyone help me on this problem? You can also visit our developing site as http://lsg-solutions.com:8888/apex/f?p=206 to check the problem.
Thanks a lot
Sam
select distinct 'MAP','Detail',so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
so.date_of_birth as "Date of Birth",
(select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
(select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
(select sc8.description from sor_code sc8 where sc8.code_id=so.hair_color) as "Hair Color",
(select sc9.description from sor_code sc9 where sc9.code_id=so.eye_color) as "Eye Color",
replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
replace(replace(nvl2(sl.physical_address1,sl.physical_address1||' '||sl.physical_city ||' '||sl.physical_county||' '||(select sc4.description from sor_code sc4 where sc4.code_id=sl.physical_state)||' '||sl.physical_zip, 'No Known Address'),'#'),',') as "Physical Address",
sl.status as "Status",
sl.jurisdiction as "Jurisdiction",
to_char(sl.ADDRESS_LATITUDE) as "Address Latitude",to_char(sl.address_longitude) as "Address Longitude",
to_char(sl.physical_address_latitude) as "Physical Latitude",to_char(sl.physical_address_Longitude) as "Physical Longitude",
decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
rox.status as "Registration Status",
rox.registration_date as "Registration Date",
rox.end_registration_date as "End Registration Date"
from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv
where rox.offender_id=so.offender_id
and sllv.offender_id(+)=so.offender_id
and sl.location_id(+)=sllv.location_id
and rox.status not in ('Merged')
and rox.reg_type_id=1
and upper(rox.status)='ACTIVE'
and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
and (((select sc11.description from sor_code sc11 where sc11.code_id=so.race and sc11.description=:P5_SL_RACE) is not null ) or (:P5_SL_RACE is null))
and (((select sc12.description from sor_code sc12 where sc12.code_id=so.sex and sc12.description=:P5_SL_SEX) is not null ) or (:P5_SL_SEX is null))
and (((select sc13.description from sor_code sc13 where sc13.code_id=so.hair_color and sc13.description=:P5_SL_HAIR_COLOR) is not null ) or (:P5_SL_HAIR_COLOR is null))
and (((select sc14.description from sor_code sc14 where sc14.code_id=so.eye_color and sc14.description=:P5_SL_EYE_COLOR) is not null ) or (:P5_SL_EYE_COLOR is null))
and (( so.offender_id in(select sm.offender_id from sor_code sc15, sor_mark sm, sor_offender so1 where sm.offender_id=so1.offender_id and sc15.code_id=sm.code and sc15.description=:P5_SL_OTHER_MARKS and sm.description is not null)) or (:P5_SL_OTHER_MARKS is null))My suggestion would be to put some instrumentation into your query and see what values you are using.. Or even simpler take out ALL the where clauses you can until data starts to sho wup and then add them back in one at a time until you find the culprit..
My bet would be on any date comparisons you are doing between page items and database columns..
Thank you,
Tony Miller
Dallas, TX -
Why will a query work in SQL Developer but not in Apex?
Here's a good one. I created a dynamic LOV with the following query.
select
e.DESCR d,
ee.ENTRD_EVNT_SK r
from
PT_EVNT_IN_DIV eid,
PT_ENTRD_EVNT ee,
PT_EVNT e
where ee.PGNT_SK = :PGNT_SK
and ee.CNTSNT_SK = :CNTSNT_SK
and ee.EVNT_IN_DIV_SK = eid.EVNT_IN_DIV_SK
and eid.EVNT_SK = e.EVNT_SK
and ee.ENTRD_EVNT_SK not in
(select js.ENTRD_EVNT_SK
from PT_JDG_SCR js
where js.JDG_SK = :JDG_SK
and js.PGNT_SK = :ai_pgnt_sk
and js.CNTSNT_SK = :CNTSNT_SK)
order by 1
The query works fine in SQL Developer, but Apex gives the following error when compiling it in the LOV editor.
"1 error has occurred
- LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query."
I tried rearranging the entries in the From clause, but that didn't do any good.
Do you see what I can do to make Apex accept it?
Thanks,
KimKim
Kim2012 wrote:
select
e.DESCR d,
ee.ENTRD_EVNT_SK r
from
PT_EVNT_IN_DIV eid,
PT_ENTRD_EVNT ee,
PT_EVNT e
where ee.PGNT_SK = :PGNT_SK
and ee.CNTSNT_SK = :CNTSNT_SK
and ee.EVNT_IN_DIV_SK = eid.EVNT_IN_DIV_SK
and eid.EVNT_SK = e.EVNT_SK
and ee.ENTRD_EVNT_SK not in
(select js.ENTRD_EVNT_SK
from PT_JDG_SCR js
where js.JDG_SK = :JDG_SK
and js.PGNT_SK = :ai_pgnt_sk
and js.CNTSNT_SK = :CNTSNT_SK)
order by 1
The column named ENTRD_EVNT_SK is used twice in a select. Once in the main select and once in the inline query.
The validation maybe choking on that.
Try giving the column in the inline query an alias and see if that helps.
Nicolette -
I recently downloaded SQL developer Version 2.1.1.64. However the code completion feature is not working automatically. I have checked the Automatically complete code in SQL worsheet checkbox under Tools->Preferences-> Code Editor-> Completion Insight.
Strangely, I get the code completion pop up window when I explicitly press the completion insight shortcut(Ctrl + Space).
Please help.
Thanks and Regards.Hi, I am getting the following logs :
Code completion time = 1015
*...?aux tok2?, parse time = 63
InsightableOracleDatabase.fetch() time = 360
Code completion time = 844
Finished parsing = 0
*...?aux tok2?, parse time = 62
InsightableOracleDatabase.fetch() time = 344
Code completion time = 812
Finished parsing = 0
*...?aux tok2?, parse time = 63
InsightableOracleDatabase.fetch() time = 359
Code completion time = 891
Finished parsing = 0
Thanks -
Filter not working in SQL Developer 2.1
I have just upgraded to SQL Developer 2.1 and there seems to be a problem with filtering information in the Data tab. The filters I type in are simply ignored. Is there a setting somewhere that I am missing?
I am running XP Pro 2002 with SP3 installed.
The DB information is below:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
"CORE 10.2.0.3.0 Production"
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
It will occasionally work when I first log in but generally stops working after the first filtered retrieve. From then on the filter line on the toolbar is just ignored. Entering incorrect sql statements does not produce any errors either. Once it starts it is consistent across all tables.
The filter option on the header of each column still works, that is the only reason I have not gone back to V1.5.
Tony
Maybe you are looking for
-
AL11 - Can't display all data in a file
Hello, We have a custom folder at OS level and configured in the AL11. We are able to open the custom folder and browse all the files. We have a file of 8 KB in size and has around 21 fields. When we open the file in AL11, it doesn't display all the
-
Disappearing hard drive - Time machine
I recently bought a Toshiba 3TB USB 3.0 hard drive for use with time machine for my iMac, running OS 10.6.8. Unfortunately Time Machine backups frequently fail because it can't find the disk. When I look in finder the disk is not available, however
-
Is there a function to adjust the touch on the touch screen? Its been very sensitive lately
iphone has been very sensitive to my touch. Is there a setting or function to adust the touch on the touch screen?
-
Assigned User Role Mirgation from EP 6.0 SP2 to SAP NW2004s (EP 7.00 SP7)
Our users are stored in LDAP and their role assignment is driven by the roles assigned to the groups. For example... Manager Group : MSS and other role assigned Employee Group : ESS and other role assigned but some users are assigned addi
-
Hello I wondered what the best option would be to save project out of iMovie the drag/drop into iDVD? i was advised by "very helpful" Beverly Maneatis not to choose the share option "iM to iDvd" due to double rendering. So after editing my footage wi