Notifications Help

I have iPhone 5 & iPad Air both w/ iOS 7.1. Pre-iPad, my iPhone notifications (ESPN) appeared on lock screen. Since adding iPad to account, notifications only appear at top of my phone screen after I unlock phone but they show on iPad lock screen. Any suggestions?

Hello Fendas01,
It sounds like the notifications for the ESPN app behave differently on your phone than they do on the iPad. You can configure this in Settings:
Settings > Notification Center > <app name>
From: iOS: Understanding notifications
http://support.apple.com/kb/ht3576
Thank you for using Apple Support Communities.
All the best,
Sterling

Similar Messages

E-mail notification HELP

Can anyone help me with the problem I have with my e-mail notification sounds. I have checked all notificaion profiles are set to on but my phone still does not give me an alert. Anyone have any ideas? I am also trying to set one of my saved sounds in my music to e-mail alerts and am struggling. I would appreciate any help
Solved!
Go to Solution.

Good, with OS 4.5 you can use JL_Cmder and its Set To Factory option.
Download it here: http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Aol email not working and phone vibrateing and ringing for notifications help me

have jelly bean now and aol email is telling me server password is not found so i changed my password and that did not help. how can i fix it without doing a factory reset. could not delete email account at all. my other 2 email accounts are working fine. very annoying. also my phone is vibrateing and ringing for notifications and i just want it to ring. if i wanted my phone to vibrate i would put it on vibrate. would somebody be able to help me with my problems thanks. everything was working fine before jelly bean. also what happened to the notifications bubble on the lock screen i kind of thought that was handy to have.

boychik0830,
Never fear help is here! Congratulations on your Jelly Bean software update! Email, and ringers are very important, so let's get this fixed asap.
You can delete the email account from the device http://bit.ly/PfAUeF , then re-add the email account back to the device. You change your ringtone settings from vibrate & ring to just ring in the sound settings menu. Hope this helps!
Thanks,
Pamelaf_vzw
Tweet @vzwsupport

Asynchronous notification help

Need some help with asynchronous notification…….
This is my jolt client:
public Service(String mode, String postedName) {
svcMode = mode;
svcPostedName = postedName;
if ( svcMode.equals(ASYNC_UNSOLNOTIFY) ) {
jUnsolEvent = new JoltUserEvent(JoltUserEvent.UNSOLMSG, null, jSessAsync);
else if ( svcMode.equals(ASYNC_PUBSUB) ) {
jEventPost = new JoltUserEvent(svcPostedName, null, jSessAsync);
I have simpapp configured and running. My client was able to successfully use the TOUPPER service advertised by tuxedo (jolt).
I do not know when an unsolicited message will be triggered by tuxedo to test the async unsolicited msg with my client works. My client overrides the onReply() method the seems to be perfect. Please suggest few scenarios where I can receive an unsol-notification.
For event notification I was asked to try subscribing to system events. In that case what should be the value of svcPostedName in:
jEventPost = new JoltUserEvent(svcPostedName, null, jSessAsync); ?{color}
My client doesnt take any expressionsas svcPostedName--that sounds like a bug, is it a bug?
I have TMSYSEVT configured.
And the ‘tmsysevt.dat’ is :
TA_SUBSCRIPTION_HANDLE 1
TA_CLASS T_EVENT_USERLOG
TA_EVENT_EXPR \\.Sys.*
TA_EVENT_FILTER TA_EVENT_SEVERITY=='ERROR'||TA_EVENT_SEVERITY=='WARN'
TA_USERLOG %TA_EVENT_DESCRIPTION
TA_SUBSCRIPTION_HANDLE 2
TA_EB_DB_SEQNO 1
TA_CLASS EB_DB_VERSION
This is my Ubb config file:
# (c) 2003 BEA Systems, Inc. All Rights Reserved.
#ident "@(#) samples/atmi/simpapp/ubbsimple $Revision: 1.5 $"
#Skeleton UBBCONFIG file for the TUXEDO Simple Application.
#Replace the <bracketed> items with the appropriate values.
*RESOURCES
IPCKEY 123456
#Example:
#IPCKEY 123456
DOMAINID simpapp
MASTER simple
MAXACCESSERS 100
MAXSERVERS 15
MAXSERVICES 45
MODEL SHM
LDBAL N
*MACHINES
DEFAULT:
TUXDIR="/ais_local/share/ankumar/BEA/tuxedo8.1/"
APPDIR="/ais_local/share/ankumar/BEA/tuxedo8.1/apps/simpapp"
TUXCONFIG="/ais_local/share/ankumar/BEA/tuxedo8.1/apps/simpapp/tuxconfig"
TLOGDEVICE="/ais_local/share/ankumar/BEA/tuxedo8.1/apps/simpapp/TLOG"
TLOGNAME="TLOG"
MAXWSCLIENTS=10
"machineName" LMID=simple
#Example:
#beatux LMID=simple
*GROUPS
GROUP1
LMID=simple GRPNO=1 OPENINFO=NONE TMSNAME="TMS"
JSLGRP
LMID=simple GRPNO=2 OPENINFO=NONE
*SERVERS
DEFAULT:
CLOPT="-A"
simpserv SRVGRP=GROUP1 SRVID=1
JSL SRVGRP=JSLGRP SRVID=2 RESTART=Y MAXGEN=2 CLOPT="-A -- -n//10.11.23.66:3051"
JREPSVR SRVGRP=JSLGRP SRVID=3 RESTART=Y MAXGEN=2 GRACE=0 CLOPT="-A -- -W -P /ais_local/share/ankumar/BEA/tuxedo8.1/udataobj/jolt/repository/jrepository"
TMUSREVT SRVGRP=JSLGRP SRVID=4 RESTART=Y MAXGEN=2 GRACE=0 CLOPT="-A --"
TMSYSEVT SRVGRP=JSLGRP SRVID=5 RESTART=Y MAXGEN=2 GRACE=0 CLOPT="-A --"
*SERVICES
TOUPPER
Please respond with your suggestions.
Thanks,
Anish
Edited by: Bangalore_anish on Feb 23, 2009 3:43 AM

Hi Anish,
You should receive an unsolicited notification when a server does a tpbroadcast() or tpnotify(). So if you want to receive an unsolicited notification with simpapp, you'll need to modify simpapp to either perform tpbroadcast() or tpnotify().
You'll receive an event when an event is published that matches your subscription expression. Remember there are two different types of events, user events, and system events. As for the event name for system events, I would try in order:
Regards,
Todd Little
Oracle Tuxedo Chief Architect

App Store Update Notifications Help

Hello all.
First time poster and first time apple product owner. I just bought an iPad (3rd Gen) last week. I'm hooked and absolutely love it. I am having an issue with two apps in regards to their update notifications in the app store. The twitter app and hbogo app currently show that an update is available. When I click update or update all, I am prompted to enter my password and after doing so i receive the Could Not Connect to iTunes Store message. This is only happening for these two apps. Moments ago I had 6 update notifications and when hitting update all the four other apps updated and two notifications remain for twitter and hbogo. I checked these forums already and was unable to find anything on the issue. Any insight into this problem would be appreciated. My thanks in advance.
Sincerely,
Satisfied Apple User

Rebooting one's iPad can often cure odd issues. To reboot, press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart. You will not lose any data or settings. See if you can update both apps after your iPad comes back up.
If that does not help, the next suggestion would be to delete the two apps, then redownload them. Once you've purchased or downloaded an app, it stays in your Apps Library and can be redownloaded at anytime in the future. To delete an App, hold your finger on any app until all apps start to jiggle. You'll see an X on the upper right hand side of the apps you can delete (native apps can never be deleted) and all you do is touch the X and you'll be asked if you are sure, say yes, and the app will be deleted. Then go to your purchased tab in iTunes and redownload the apps.

Save_text Function module is not update the data in the notification, Help!

Here is the code snippet, does anybody know why? Thanks!
form update_root_causes
   tables p_it_root_causes type zqmtxt_t
   using notif_no.
data:
      ls_header type thead,
      lit_lines type standard table of tline,
      lwa_line like line of lit_lines,
      lv_index type i value 0.
field-symbols:
      <fs> like line of p_it_root_causes.
fill the header
ls_header-tdobject = 'QMEL'.
ls_header-tdname = notif_no.
ls_header-tdid = 'LTXT'.
ls_header-tdspras = sy-langu.
fill the lines table
fill from line #2 ...
lv_index = 0.
loop at p_it_root_causes assigning <fs>.
    if lv_index gt 0.
      lwa_line-tdformat = '*'.
      lwa_line-tdline = <fs>-qmtxt.
      append lwa_line to lit_lines.
    endif.
    lv_index = lv_index + 1.
endloop.
update the save_text
call function 'SAVE_TEXT'
    exporting
      header          = ls_header
      insert          = 'x'
    tables
      lines           = lit_lines.
call function 'COMMIT_TEXT'
   exporting
     object                = ls_header-tdobject
     name                  = ls_header-tdname
     id                    = ls_header-tdid
     language              = ls_header-tdspras.
endform.                    " UPDATE_ROOT_CAUSES

Hi Anthony,
Two things you can check:
1. Ensure the notification number you are passing is valid, i.e. it has the requisite number of leading 0s (apply CONVERSION_EXIT_ALPHA_INPUT to ensure to the field notif_no before passing it to ls_header)
2. In the function module to SAVE_TEXT - INSERT should be 'X' not 'x'
Please check.
Adi

Iphone 5 cracked screen but worked fine for 7 months that have owned it, blue lines started appearing, now screen is black, but can still hear notifications HELP!!!

My iphone 5 was given to me by my sister in january, had a cracked screen, but has worked perfectly in the time i have owned it, recently it begain to have blue lines appear on the screen, but was still working, now screen is black and cant see anything, i know its on as i can hear all notifactions (messages, calls, emails etc) help please, whats wrong! can i still claim apple support, as i dont have warrenty papers?

There are no warranty papers, never have been for iPhones.
Take the device to Apple, an Out of Warranty replacement is $229.
Warranty does not and has never covered damage. The device has suffered damage (cracked screen).

PUSH NOTIFICATION HELP ON QQ2011

The app QQ2011 can not recieve push notifications. it worked for a few days but now i have to open the app to see my new messages. and after a few days it worked again. any idea what is going on?

Found the solution without deleting or logging out.
Tap Recent to bring up your conversation history.
Tap the Edit button at the top of the screen.
Tap the check icon at the top right of the screen and select Mark All As Read.
You can also tap Yes, don’t ask again so that next time you only need to tap the Edit button and the check icon to mark all your received conversations as “read”.
At first you may not see any changes, but when you leave the Recent tab, things will update.

After updating to the iOs 5 i dont get any push notifications. help please

i need your help please.

Hey,
I was able to solve this problem now as follows:
1. delete your iCloud mail accoount from: Settings -> Mail/Contact/Calender
2. login with icloud under Settings -> iCloud
and after that push will work

I have the iPhone 4, just updated to iOS 7 and I no longer get any notification with my messages. Tried to fix the settings, it all supposed to show up but wont. help?

Messages are not showing up on my phone. no noise of notification. help?

Camera improvements
Swipe through different camera modes – video, still photo, square aspect, and panorama
Real-time photo filters with iPhone 4S or later, and iPod touch (5th generation)

How do I get email and text message notifications when my phone is locked?

How do I get email and text message banner notifications on my iphone when the phone is locked? When I had iOS 6 I could get notifications with sound and banner. Now that I have iOS7 I can't see notificaitons when the phone is locked.

See if this support document about Notifications helps. http://support.apple.com/kb/HT3576

Quality Notifications - Items / tasks / activities / overview / causes / ..

Hi PLM specialists,
I do have a question concerning quality notification, type F2 - vendor error. I do get the following tabs: reference objects, subject, processing: that's clear.
But there are also these tabs: items, tasks, activities. The tab items has the following subtabs: overview, causes, tasks and activities.
Does anyone has an idea concerning their use and what is the difference between the subtabs tasks, activities and the tabs tasks and activities?
Thanks!

Dear Peter,
The use of Item level Tasks and Header level task have been mentioned in SAP help.
Basicaly Header level tasks are referred as "Immediate Tasks", These tasks provide a quick fix for a problem requiring immediate attentione and header level activities are referred as activities done immediately attend the same.
Item level tasks are " Corrective Tasks". These tasks usually provide final solutions that wil prevent the problem for reccuring.
For eg if you get a vendor rejection in your shop the immediate action will to intimate to the concerned person quickly and remove it to block location. So your immedite task can be of like 1) Communicate the production personnel 2) block the material 3) block the vendor 4) inform vendor and activities can be of like 1) email send to vendor 2) material moved to block 3)deliveries return back to vendor etc
But as you know notification refers to a particular defect. So we need to take necessary corrective and preventive actions. SAP notification helps in doing this also. The item level entries are basicaly meant for this. In Item overview we can enter the defects that was noted on the material, you can maintain relevant causes for the same. Corrective tasks can be of like 1) Audit at vendors place 2) activation of source inspection 3) tighten the inspection standards and relevant activities done to achieve the tasks can also be maintained. This also helps in creating the 8D reports
So a detailed analysis of the problem is dealt in the item level Cause, tasks & activities while immediate action get covered in the header datas.
Hope this helps in clarifying your doubt
Regards
Gajesh

Notification process

While creating manual notification in the header there is three flag is there
Postpone,complete,process
what is three three flag mean for and when we want to use this flag
pls tell me the process in making till end of the process in sap for notification
What is the outstanding notification means
Faisal

Hii,
Notification in Process - Once you have created a quality notification and entered all of the facts of the problem, you can put the notification in process. When you put a notification in process, you are releasing the notification for processing
Notification Potponemnet - In some cases, it may be necessary to delay the processing of a quality notification (for example, because the assigned tasks cannot be performed yet or because the defects analysis has not been completed).
Notf complete - You complete a quality notification when the notification problem has been solved and no further processing is required. After you complete a notification, the data in the notification can no longer be changed. You can then only display the notification.
When a notification is completed, it receives the status NOCO (notification completed).
Detailed level info:
Basicaly Header level tasks are referred as "Immediate Tasks", These tasks provide a quick fix for a problem requiring immediate attentione and header level activities are referred as activities done immediately attend the same.
Item level tasks are " Corrective Tasks". These tasks usually provide final solutions that wil prevent the problem for reccuring.
For eg if you get a vendor rejection in your shop the immediate action will to intimate to the concerned person quickly and remove it to block location. So your immedite task can be of like 1) Communicate the production personnel 2) block the material 3) block the vendor 4) inform vendor and activities can be of like 1) email send to vendor 2) material moved to block 3)deliveries return back to vendor etc
But as you know notification refers to a particular defect. So we need to take necessary corrective and preventive actions. SAP notification helps in doing this also. The item level entries are basicaly meant for this. In Item overview we can enter the defects that was noted on the material, you can maintain relevant causes for the same. Corrective tasks can be of like 1) Audit at vendors place 2) activation of source inspection 3) tighten the inspection standards and relevant activities done to achieve the tasks can also be maintained. This also helps in creating the 8D reports
So a detailed analysis of the problem is dealt in the item level Cause, tasks & activities while immediate action get covered in the header datas.

Top 10 Most Reasonable Feature Requests for BlackBerry 10.3

Real DNA wrote:- In this post I am going to list some of the most reasonable features that I think would be doable and useful for the next installment of the BB10 OS. I'm going to leave out any concept-like ideas and or major overhauls and focus on things that I feel could become a reality.
1) Ability to hide shadow boxes around app icons on home screen
Michael Clewley already hinted that this ability would be in 10.2.1, but during some of the leaked builds and announcements, it doesn't really seem like it will be coming in this release. If it doesn't come in official builds of 10.2.1, then it should be very likely to appear in 10.3. In the meantime, an easy way to get rid of the shadowboxes is by using a dark or black wallpaper
2) Ability to adjust App grid sizes on home screen
Following up on the first point, so far there are 3 app grid configurations for BB10 devices: 3x4 on Q devices, 4x4 on the Z10 and 5x4 on the Z30. Having the option to pick between those layout and potentially adding more (3x3 or 5x5) seems like something doable. Now for Q devices it might seem like something a bit unnecessary considering the already cramped screen size, well you would be right in thinking that except for this...is an image I will post in my album.
Granted, that's a bit impractical, but it was pretty nice having the option to basically have 4 or 6 columns. Since they've done it before and the BB10 phones have bigger screens, why not?
3) Ability to hide icons
Another feature from legacy devices was the ability to hide redundant or just rarely used icons from sight. It would certainly be a good way for me and other people to not have a folder like this...also an image.
4) Limitless Folders
BlackBerry, why are we limited to only 16 apps per folder? Something like this is pretty simple since you could literally put EVERY SINGLE app you had in one folder in PlayBook OS and BB7. (I've done it before)
5) Customizable Fonts
Something I that I think was a bit underrated in legacy devices was the ability to customize fonts. I loved having a crisp and professional Times New Roman font or Sans Serif when I wanted to play around and experiment. I don't have a problem with the standard BB10 "Slate" font, but options are always nice.
6) Customizable LED
I know this is something a lot of people have been wanting for a very long time, so 10.3 might finally be the time for it. There are plenty of very good apps that do this, but when I realized that LG's Android JellyBean skin on the G2 had the ability right out of the box, I figured now would be as good a time as any for BB (who's most notable for the LED notification light) to have it built in.
7) Battery Saver Mode
Z10 owners, I know you would really appreciate this. Introduced in BB OS 7.1 was a battery saver mode to help increase the longevity of your device when it gets to a certain percentage. And with me having a Curve 9350 with a measly 1000 mAh battery at the time, this was a life saver.
In this post I am going to list some of the most reasonable features that I think would be doable and useful for the next installment of the BB10 OS. I'm going to leave out any concept-like ideas and or major overhauls and focus on things that I feel could become a reality.
1) Ability to hide shadow boxes around app icons on home screen
Michael Clewley already hinted that this ability would be in 10.2.1, but during some of the leaked builds and announcements, it doesn't really seem like it will be coming in this release. If it doesn't come in official builds of 10.2.1, then it should be very likely to appear in 10.3. In the meantime, an easy way to get rid of the shadowboxes is by using a dark or black wallpaper
2) Ability to adjust App grid sizes on home screen
Following up on the first point, so far there are 3 app grid configurations for BB10 devices: 3x4 on Q devices, 4x4 on the Z10 and 5x4 on the Z30. Having the option to pick between those layout and potentially adding more (3x3 or 5x5) seems like something doable. Now for Q devices it might seem like something a bit unnecessary considering the already cramped screen size, well you would be right in thinking that except for this...
How to Change your BlackBerry Homescreen Tile Layout - N4BB
Granted, that's a bit impractical, but it was pretty nice having the option to basically have 4 or 6 columns. Since they've done it before and the BB10 phones have bigger screens, why not?
3) Ability to hide icons
Another feature from legacy devices was the ability to hide redundant or just rarely used icons from sight. It would certainly be a good way for me and other people to not have a folder like this...
4) Limitless Folders
BlackBerry, why are we limited to only 16 apps per folder? Something like this is pretty simple since you could literally put EVERY SINGLE app you had in one folder in PlayBook OS and BB7. (I've done it before)
5) Customizable Fonts
Something I that I think was a bit underrated in legacy devices was the ability to customize fonts. I loved having a crisp and professional Times New Roman font or Sans Serif when I wanted to play around and experiment. I don't have a problem with the standard BB10 "Slate" font, but options are always nice.
6) Customizable LED
I know this is something a lot of people have been wanting for a very long time, so 10.3 might finally be the time for it. There are plenty of very good apps that do this, but when I realized that LG's Android JellyBean skin on the G2 had the ability right out of the box, I figured now would be as good a time as any for BB (who's most notable for the LED notification light) to have it built in.
7) Battery Saver Mode
Z10 owners, I know you would really appreciate this. Introduced in BB OS 7.1 was a battery saver mode to help increase the longevity of your device when it gets to a certain percentage. And with me having a Curve 9350 with a measly 1000 mAh battery at the time, this was a life saver.
I would be able to squeeze out a couple more hours of extra use with the mode enabled at 40-50%. For Z10 owners especially, this feature could potentially wipe out one of the biggest or only real major flaw: the battery life. This could also be great for the Z30 and Q10 owners already getting stellar battery life.
Universal Dark/Light Theme and Dark Hub option
This one would be huge in terms of aesthetics and potentially power saving. (Form and function at its finest) For all users having the ability to customize all of the native apps or specific ones to be light or dark adds a nice amount of customization to the devices. Having a Dark hub seems like a great way to increase battery life even more especially if the device is used mainly for communication. If you spend most of your time in the hub anyway, you might as well preserve battery life while enjoying the sleekness it brings.
9) Landscape Home screen, Peek, and Flow
I'm not going to mention the fact that the PlayBook and Torches could do this because that would be beating a dead horse. I, however, will mention two great benefits it would bring:
1) Playing games, watching videos, or typing using the landscape keyboard layout - Its a minor annoyance to have to turn the device back to portrait orientation or have to leave the app completely to view where and who my notification is from. BB Flow is arguably a way to differentiate from the normal way of doing things, the "in and out paradigm" if you will, so having this essentially nullified when the device is in landscape just seems counter-intuitive. Keeping the flow consistent enhances the user experience and it just seems more cohesive overall. Also its a bit weird returning to the home screen while your device is in landscape and its set to portrait. Granted the actionable notifications help, but the full solution is best.
2) HDMI out/ Miracast "Mobile Computing" - One of the things that former CEO Thorsten Heins really talked about was the ability to simply plug into a monitor and have your phone truly be your home/ office/ mobile computer. That's great, but it doesn't really work when my output on a widescreen monitor only takes up maybe a third of the screen real estate (not that big a problem for Q devices). Having a landscape home screen just makes sense if you use or potentially want to use your device for something like that.
10) Android 4.4 Kit Kat Application Support
BlackBerry is pushing this Android runtime really hard as far as getting more apps and making sure they run as smooth as possible, so it just seems like a no-brainer for them to stay as up to date as possible. Considering the BB10 upgrade cycle 10.2 in September/October and 10.2.1 in January/February it should be expected that a 10.3 release would be in Spring or an early summer. By then Android Kit Kat should have a decent amount of marketshare among android users, so most apps should be updated to support it by then.
That's my list so feel free to tell me what you think or if I missed anything REASONABLE. Some honorable mentions would be customizing the bottom dock, an equalizer, further pull down enhancements and integration with Skydrive and Google Drive in the native file manager.
Khalilullah

- ability to choose deletion of an email on handset only
- desktop software working with all older BB's allowing drag and drop type of transferring data, contacts etc. (BB link doesn't recognize my old Storm)
- auto power on/off
- contacts syncing with yahoo & Outlook (almost two weeks trying to work around it and no luck)

SAP Convergent Charging 2.0 launching is aborted

Hello Experts,
we are getting error while starting SAP CC 2.0 in dispatcher#1.log.2, We recently applied SP14 to CC 2.0
2014-03-03 20:20:27.570 - [144.111.37.243*]dispatcher#1 - FATAL - [LAUNCHING_ABORTED] - SAP Convergent Charging 2.0 4.3.14.0 launching is aborted. Please check previous server logs.
2014-03-03 20:20:29.756 - [144.111.37.243*]dispatcher#1 - INFORM - [LAUNCHER_STARTING] - Starting SAP Convergent Charging 2.0 4.3.14.0.
2014-03-03 20:20:29.757 - [144.111.37.243*]dispatcher#1 - INFORM - [tracing] - Core Server database schema version: 4.3.5.
2014-03-03 20:20:29.992 - [144.111.37.243*]dispatcher#1 - INFORM - [SQL_MANAGER_CONNECTED] - Connected to jdbc:oracle:thin:@host.com:1521:dbname ora<sid>.
2014-03-03 20:20:29.992 - [144.111.37.243*]dispatcher#1 - INFORM - [SQL_MANAGER_RUNNING] - Running (16 connections in pool, statement cache size 1).
2014-03-03 20:20:29.992 - [144.111.37.243*]dispatcher#1 - INFORM - [SQL_MANAGER_SEQ_CONNECTION] - Creation of connection to jdbc:oracle:thin:@host.com:1521:dbname dedicated to id generation.
2014-03-03 20:20:30.057 - [144.111.37.243*]dispatcher#1 - INFORM - [tracing] - Initializing the notification helper...
2014-03-03 20:20:30.058 - [144.111.37.243*]dispatcher#1 - INFORM - [tracing] - Reading notification policy from database...
2014-03-03 20:20:30.067 - [144.111.37.243*]dispatcher#1 - INFORM - [tracing] - No notification policy defined in the database.
2014-03-03 20:20:30.118 - [144.111.37.243*]dispatcher#1 - INFORM - [LAUNCHER_AUDIT_ENABLED] - Audit is enabled.
2014-03-03 20:20:30.180 - [144.111.37.243*]dispatcher#1 - WARN - [tracing] - Unexpected Exception Exception: com.highdeal.bulkloader.db.LoadChargedItemInDBFactory Stacktrace: java.lang.ClassNotFoundException: com.highdeal.bulkloader.db.LoadChargedItemInDBFactory
        at java.net.URLClassLoader$1.run(URLClassLoader.java:255)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:243)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:367)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:344)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:308)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:169)
        at com.highdeal.util.xml.XMLMappingExtractor$1.getClass(XMLMappingExtractor.java:99)
        at com.highdeal.hci.XMLMappingList.getClass(XMLMappingList.java:45)
        at com.highdeal.hci.XMLUnmarshaller.startElement(XMLUnmarshaller.java:154)
        at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:501)
        at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(XMLNSDocumentScannerImpl.java:400)
        at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2756)
        at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:647)
        at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140)
        at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
        at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:817)
        at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
        at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
        at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205)
        at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522)
        at com.highdeal.hci.util.XMLTool.load(XMLTool.java:67)
        at com.highdeal.cif.server.model.ChargedItemProcessorShellModel.getIChargedItemProcessorFactoryModel(ChargedItemProcessorShellModel.java:97)
        at com.highdeal.cif.server.model.ChargedItemProcessorShellModel.initialize(ChargedItemProcessorShellModel.java:62)
        at com.highdeal.admin.parameter.system.SystemParametersManagers.initializeInstanceType(SystemParametersManagers.java:185)
        at com.highdeal.admin.parameter.system.SystemParametersManagers.<init>(SystemParametersManagers.java:97)
        at com.highdeal.launcher.DispatcherInstance.initialize(DispatcherInstance.java:265)
        at com.highdeal.launcher.Instance.initialize(Instance.java:302)
        at com.highdeal.launcher.Launcher.main(Launcher.java:116)
2014-03-03 20:20:30.181 - [144.111.37.243*]dispatcher#1 - FATAL - [tracing] - Dump occurred exception ... Exception: SAXException: UnknownTagException: chargedItem2DB Stacktrace: java.lang.IllegalArgumentException: SAXException: UnknownTagException: chargedItem2DB
        at com.highdeal.cif.server.model.ChargedItemProcessorShellModel.getIChargedItemProcessorFactoryModel(ChargedItemProcessorShellModel.java:103)
Not sure if SAP CC 2.0 services are started successfully. During patching we didnt receive any error or warning from sapisnt. Database is up and running successfully.
Request your urgent help in this.
Regards,
Swapnil Lakhe

How you check the license file ?
Regards,
Vincent

Notifications Help

Similar Messages

Maybe you are looking for