Novice AccessControlException Problem
I am trying to get my first servlet to work correctly from an applet on a different machine. Here are the facts.
1. The applet works correctly using localhost running on the same machine as Tomcat.
2. The servlet URL works correct when entered directly in the browser from anywhere:
http://66.80.151.137:8080/examples/servlet/GetLetterDescriptionServlet?letter=A
3. The applet fails when running on a different machine from Tomcat.
try
cServlet.setString("http://66.80.151.137:8080/examples/servlet/GetLetterDescriptionServlet");
cServlet.addParam("letter", btnClicked);
cServlet.connect();
lblBottom.setText((String)cServlet.readObject());
catch(MalformedURLException murle)
lblBottom.setText("Malformed URL Exception");
catch(IOException ioe)
lblBottom.setText("IO Exception");
catch(ClassNotFoundException cnfe)
lblBottom.setText("Class Not Found Exception");
cServlet is a Communication() object from Speegle's JDBC book. I can get you the small number of lines of code if you need it.
Here's the first part of the error I get.
java.security.AccessControlException: access denied (java.net.SocketPermission 66.80.151.137:8080 connect,resolve)
at java.security.AccessControlContext.checkPermission(Unknown Source)
at java.security.AccessController.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkConnect(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.checkPermission(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at Communication.connect(Communication.java:52)
at lab1swingappletservlet.actionPerformed(lab1swingappletservlet.java:85)
Applets have built in security that you only can connect back to the originating server (the server from where the applet is downloaded).
To get past this, you most use a signed applet.
http://forum.java.sun.com/thread.jsp?forum=63&thread=174214
Similar Messages
-
Powerbook novice - power problem
hello There, I have just got a secondhand 1.33MHz 15" powerbook G4. The last owner said battery was on its way out but it worked fine with a power adapter. I booted the powerbook up and it started fine and dandy, ran for a couple of minutes and then said the battery was low and I needed to plug it in. I plugged it in and the power adapter port didn't light up. I tried jiggling the fitting but nothing happened. My new toy shut itself down and now is sitting there with a little sleep light pulsing away by it's catch. I tried to shut it right down by holding in the power button but it refuses to shut down. Any ideas/tips?
It sounds like the power adapter is bad. Can you find a substitute to try? The ring on the power plug should show either orange or green at all times when inserted. Sometimes the adapter gets confused by power surges from the mains, and disconnecting from mains for a minute then reconnecting can reset it.
Once you have a known good power adapter, resetting the Power Management Unit (PMU) my be needed - http://support.apple.com/kb/HT1431 -
Slower performance after Mavericks upgrade
My Macbook Pro has been significantly slowed down by my upgrade to Mavericks. (Processor 2.3 GHz Intel Core i7) (Memory 8 GB 1600 MHz DDR3) (Graphics Intel HD Graphics 4000 1024 MB) I can't watch a 2 minute video without long... long rendering pauses. I get error messages and find the computer quits and starts again at random moments. Loading apps is slower. I am not talented technically and need some layman version of how to use time machine or other backup info to go back to my Mountain Lion IOS or how to fix this deterioration of my computer performance. I have run the etresoft app to provide more info. Unfortunately I am very much a novice at problem solving computer issues so if this is above my paygrade please feel free to send me to more competent sources..
Hardware Information:
MacBook Pro (Retina, Mid 2012)
MacBook Pro - model: MacBookPro10,1
1 2.3 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
NVIDIA GeForce GT 650M - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
WiFiUtilityStartUp - Path: /System/Library/StartupItems/WiFiUtilityStartUp
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 1:10:23
Disk Information:
APPLE SSD SM256E disk0 : (251 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 250.14 GB (146.62 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
User Launch Agents:
[failed] com.adobe.ARM.[...].plist
[failed] com.google.keystone.agent.plist
[loaded] ws.agile.1PasswordAgent.plist
User Login Items:
Backup Engine
Dropbox
WirelessUtility
3rd Party Preference Panes:
Flash Player
Internet Plug-ins:
Default Browser.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Google Earth Web Plug-in.plugin
Bad Fonts:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO
Volumes being backed up:
Macintosh HD: Disk size: 250.14 GB Disk used: 103.52 GB
Destinations:
LaCie Disk [Local] (Last used)
Total size: 164.68 GB
Total number of backups: 1
Oldest backup: 2013-02-06 00:39:17 +0000
Last backup: 2013-02-06 00:39:17 +0000
Size of backup disk: Too small
Backup size 164.68 GB < (Disk used 103.52 GB X 3)
Top Processes by CPU:
3% WindowServer
2% firefox
1% EtreCheck
1% mds_stores
1% fontd
0% WirelessUtility
0% Mail
0% mds
0% aosnotifyd
Top Processes by Memory:
426 MB firefox
319 MB Finder
246 MB Mail
164 MB DashboardClient
156 MB WindowServer
156 MB com.apple.IconServicesAgent
147 MB Dock
131 MB mds_stores
106 MB Dropbox
106 MB com.apple.WebKit.WebContent
Virtual Memory Statistics:
2.31 GB Free RAM
4.09 GB Active RAM
732 MB Inactive RAM
903 MB Wired RAM
451 MB Page-ins
0 B Page-outsDo you know the reason for using WiFi Utility? It is not part of OS X and may be contributing to the problem.
Assuming you have no reason to use it:
Navigate to the following folder by selecting the entire line (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Open:
/System/Library/StartupItems/
Find the file WiFiUtilityStartUp and drag it to the Desktop. You will need to authenticate.
Next: Open System Preferences by selecting it from the (Apple) menu, then select Users & Groups. Click the lock icon and authenticate, then click your User account. Select the Login Items tab, then select the item WirelessUtility. Delete it with the "–" (minus) button.
Next: Backup Engine is not part of OS X either, and is unrelated to Time Machine, which you are using. It may have been installed as part of a utility supplied by Seagate or other hard disk manufacturer. Such utilities should not be used on Macs. If you have no reason to use Backup Engine, delete it as well using the "–" button.
Quit System Preferences, log out, and log in again. Reply with your results. -
Problems with JGSS tutorial - AccessControlException
Hi all,
unfortunately I've got a big problem with the ClientServer JGSS tutorial.
After doing everything like the HTML file said, I firt started the server and then the client.
The client then produces this exception:
Kerberos username [stnt1]: myName
Kerberos password for benni: myPass
java.security.AccessControlException caught
access denied (javax.security.auth.kerberos.ServicePermission SampleServer/[email protected] initiate)
java.security.AccessControlException: access denied (javax.security.auth.kerberos.ServicePermission SampleServer/[email protected] initiate)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:269)
at java.security.AccessController.checkPermission(AccessController.java:401)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
at sun.security.jgss.krb5.Krb5Context.checkPermission(Krb5Context.java:1089)
at sun.security.jgss.krb5.Krb5Context.initSecContext(Krb5Context.java:527)
at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:213)
at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:158)
at SampleClient.main(SampleClient.java:150)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at MyAction.run(Login.java:241)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at Login.main(Login.java:200)
... and I really don't have any clue about why exactly I'm getting this error.
Thanx a lot for hints and help ...
BenjaminHi again,
got it ... I hat my computer name written wrong in the start script.
Bye,
Benjamin -
Help needed!! Novice with Garbage Collection problems.
Hi Guys,
Really hoping somebody can help me here. I am a relative novice when it comes to all things Java but i am slowly trying to learn. I have come across an issue which i have identified but i am just not sure what to do about it.
Ok, in a nut shell the issue seems to be revolving around the frequency of garbage collection. From the default-err.log file i am seeing (on average) an Allocation Failure occur every 2 secs. Here is a sample from the log with verbose:gc active:
<AF[4986]: Allocation Failure. need 208480 bytes, 78 ms since last AF>
<AF[4986]: managing allocation failure, action=2 (559165976/1342176248)>
<GC: Mon Oct 11 11:51:12 2004
<GC(4986): freed 4101528 bytes in 1559 ms, 41% free (563267504/1342176248)>
<GC(4986): mark: 1301 ms, sweep: 258 ms, compact: 0 ms>
<GC(4986): refs: soft 0 (age >= 32), weak 0, final 0, phantom 0>
<AF[4986]: completed in 1563 ms>
<AF[4987]: Allocation Failure. need 208536 bytes, 78 ms since last AF>
<AF[4987]: managing allocation failure, action=2 (559138336/1342176248)>
<GC: Mon Oct 11 11:51:14 2004
<GC(4987): freed 4105128 bytes in 1563 ms, 41% free (563243464/1342176248)>
<GC(4987): mark: 1293 ms, sweep: 270 ms, compact: 0 ms>
<GC(4987): refs: soft 0 (age >= 32), weak 0, final 0, phantom 0>
<AF[4987]: completed in 1563 ms>
As you can see, allocation failures are occuring all the time, and with 2secs between events, and each GC taking around 1.5secs, i am having massive problems with the response of the server. It seems that the javaw.exe process is just pegged at 100% CPU the whole time and then it will eventually grind to a halt, and the users will get terrible response times.
OK, the questions are:
- Even to me (a novice) the above extract from the log doesnt look good. Am i right?
- what would be causing this? (i know - how long is a peice of string but i am hoping somebody can point me in the right direction so i can look some more)
- what can i do about it? Is there any parameters i can put into the java args to help me out?
Currently i am running -Xms of 128meg and an -Xmx of 1024m with no other settings. There are at the moment about 200users logged onto this server concurrently, and it seems to die a couple of hours into them all being logged on. I then have to kick everybody out and reboot to get it in a working state again.
I am in some serious need of help from some gurus!! any help would be invaluable, thanks heaps guys.
TimHi Again guys, thanks for all your replies.
I have been working my butt of on this issue and i just cant seem to get anywhere... probably due to my complete lack of knowledge on this whole GC thing! :)
One thing that i have noticed that seems to be very consistant is the fact that as soon as i get an "action=2" in my default-err.log from an allocation failure, thats when the system goes nuts and tends to not recover.
At all other times it is an action=1, and the system seems to be running OK, but as soon as i get action=2, the time between GC events drop from seconds to miliseconds, and the bytes required just skyrockets. It keeps on this upward spiral till i just have to reboot the box.
From all my reading, i have found that an action=2 means "2 - The Garbage Collector has tried to allocate out of the wilderness, and failed."
This is the only item in the logs that i see is directly related to the server performance.
Can anybody please explain to me (in laymans terms) what the action=2 means, what may cause it and what i should be looking at changing to fix it?
The extract from the log files (in my first post in this thread) are still valid, as are the min/max memory settings.
Any help at all would be invaluable.
Thanks very much.
Tim -
Okay, for a novice (iphone for dummies) what steps to take and in what order to identify specific problem and resolve issue of dropped calls and/or bad connections. I have a 3g iphone4, I think. Where is best place to find that information so I can verify.
You can call your wireless provider and talk to them about it.
You can restart your iphone, reset, your iphone and restore your iphone. -
Novice Logic Express user has Midi setup problems
Hi, folks. I'm a novice Logic Express 7 user (I used a much earlier version as a sequencing package a very long time ago). I've just installed Logic Express 7 on my Mac OS X and connected my Technics PCM Digital Piano PX 107 to the Mac via a MIDIsport UNO midi interface. There's some stuff happening (and not happening) that I don't understand yet.
Firstly, I can see on the transport window that midi in and out are both registering events, but I am getting a wierd echo of very low notes coming back through the keyboard speakers, making it impossible to make any sense of what I am playing.
Secondly, if I turn the volume off on the digital piano, I can't hear anything at all, even when midi events are being registered.
Thirdly, I don't appear to be able to record anything. Once I click record, the midi seems to stop functioning altogether.
Lastly, my midi metronome click comes back through my keyboard speakers as a very low note.
Should I have my keyboard volume turned up at all? (My guess is I shouldn't, but I can't hear anything at all at the moment if I turn it down). And can anyone help me with these perplexing problems. All contributions very gratefully received, thanks.
Mac OS X Mac OS X (10.4.5)I think you need to figure out how to turn off local playback on your keyboard. You are probably hearing the sound from your keyboard as you are playing, plus the sound that the keyboard plays when Logic is sending midi notes.
There appears to be another problem that your midi is being transposed down in Logic. That would explain the low "echo" and low metronome click.
All the sounds are being made by your keyboard--that's why you can't hear anything when you turn it down. What is it that you are trying to do? Do you want to record midi and have that play back through your keyboard, or do you want to just use your keyboard as a controller for Logic's sounds? -
I am not sophisticated at understanding computer language. What I know is that 3 things have happened in the last 2 weeks.
1.My yahoo account which I go to from Mozilla firefox 4.0.1 now requires me to click on a link that says it disables updates. Then my homepage seems to be ok/normal except:
2.One of the email links tries to open a site called Ok Cupid and that site is really distorted and unreadable
3. another website www.texastrails.org has a tab called 'docs' which can be reached from "member portal". There should be documents in Word and adobe reader on the left side of the screen which can be opened normally. These do not exist now and the texas trails webmaster says it has to do with Java Script. (it does open in Internet Explorer)
Why would these two sites open in IE but not firefox?
Note that I went to "My Computer" and found I have environment 5.0 Java6 update 24 and J2SE Runtime environment 5.0update 6 on different lines. I have no clue what these mean:-)
I also click on Firefox "tools" and see that java is checked/enabled.This is not an answer. I have the same problem, what gives? None of the "solutions" have worked. The only thing left I haven't tried is resetting my IP an disabling my routers firewall, which is dangerous. Guess I might just keep on using IE instead, sure it's annoying, but hey it works.
-
I had the 3.3 update window with Aperature pop up and say that I could no longer work with my library until updating Aperature. The update froze up about 90% through the completion of the last set(9 of 9/ 90% complete) and ran over night. My MAC shows version 3.3 installed. When I try to open Aperature, I get a system crash error. I am a novice at best when working with software and I am panicing because of the amount of pictures that I have on the system. I do back them up but do not know how to restore Aperature software(I purchased it before the app store and can not find it). Please advise.
There is an Aperture forum that you can repost in, that is where you will find the guru's for that product. Simply click: Aperture to get there. BTW before you do please complete your profile, it makes it much easier for those attempting to assist you. You can find instructions by clicking Profile Update
-
[Novice Problem] With CharacterFormat
Hi everybody,
I am working with TLF for few days and I don't understand something...
I have created a textflow, and I want to apply a style (color, fontFamily...) on selected characters
But when I use CharacterFormat, the style is applied on all the text.
My first try (juste change the colortext) :
Here I create my textflow :
private var _textFlow:TextFlow = null;
private var _container:Sprite = null;
public var manager:EditManager;
private function initNote():void
var controller:IContainerController;
_container = new Sprite();
textArea.rawChildren.addChild(_container);
_textFlow = new TextFlow ();
controller = new DisplayObjectContainerController(_container,textArea.width,textArea.height);
_textFlow.flowComposer.addController(controller);
_textFlow.addEventListener(StatusChangeEvent.INLINE_GRAPHIC_STATUS_CHANGED, graphicStatusChangeEvent);
manager = new EditManager(new UndoManager());
_textFlow.interactionManager = manager;
_textFlow.interactionManager.setSelection(0,0);
_textFlow.flowComposer.updateAllContainers();
_textFlow.interactionManager.setFocus();
Here, I want to apply the selected color
private function changeCharacterColor(event:ColorPickerEvent):void
var cf:CharacterFormat = new CharacterFormat(currentNote.myTextFlow.characterFormat);
cf.color = colorChar.value;
currentNote.myTextFlow.characterFormat = cf;
currentNote.myTextFlow.flowComposer.updateAllContainers();
I checked the selection to be sure that it is good (thanks to the TextScrap options). But no problem on this side.
I try today with myTextFlow.interactionManager.selectionState.pointFormat = cf to apply the new color. But it doesn't work too.
I think I have miss something. Can somebody help me?
Thank you very much.
NB: Sorry for my bad english :/ (poor french I am )Any idea?
I work with sdk 3.2, (it's an AIR application), ad the FP 10.
I saw that I have the old version of TLF : http://livedocs.adobe.com/labs/textlayout/flashx/textLayout/events/SelectionEvent.html
and note this one : http://help.adobe.com/en_US/Flex/4.0/langref/flashx/textLayout/events/SelectionEvent.html
Do you know if I can use the TLF Build 370 with my sdk 3.2 ? If it's yes what have I to do?
If I can't use the latest version of TFL :
My actual problem is (I am still working on the style of selected character :'( ) in my version of TLF with a SelectionEvent, I just can use
event.selectedElementRange because the event.selectionState doesn't exist. Do you know how to have the selectionState corresponding?
private function addListenerTextFlow(e:FlexEvent):void
myTextFlow.addEventListener(SelectionEvent.SELECTION_CHANGE, handleSelectionCharacter);
public function handleSelectionCharacter(event:SelectionEvent):void
this.noteOptions.myNoteOptionsCharacter.selectedRange = event.selectedElementRange;
this.noteOptions.myNoteOptionsCharacter.selectionState = ???? ;
this.noteOptions.myNoteOptionsCharacter.cf = new CharacterFormat;
and when I apply a style :
private var selectedRange:ElementRange;
private var selectionState: SelectionState
private function changeCharacterFont(event:ListEvent):void
cf.fontFamily = fontList.value.toString();
(currentNote.myTextFlow.interactionManager as EditManager).applyCharacterFormat(cf, selectionState);
currentNote.myTextFlow.flowComposer.updateAllContainers();
As you can see to apply my font it is missing the arg2 (selectionState), but I have an ElementRange. Can I "transform" an ElementRange into a SelectionState?
Please, I need your help :'( -
[SOLVED] Recovery shell Problem / Arch novice booting 1st time
This is my problem after/during the boot of the Arch for the first time:
Root device `/dev/hda3`doesn`t exist, attempting to create it
ERROR: Failed to parse block device ids for `/dev/hda3`
ERROR: Unable to detect or create root device `/dev/hda3`
You are being dropped to a recovery shell
Type `reboot` to reboot
Type `exit` to try and continue booting
NOTE: klibc contains no 'ls' binary, use `echo *` instead
If the device `/dev/hda3` gets created while you are here,
try adding `rootdelay=10` or higher to the kernel command-line
ramfs$
I have 10 partitions. (Mint mounting points)
Sda1 system reserved (NTFS)
Sda2 W7
Sda3 NTFS
Sda4 extended
Sda5 ext4 (Mint 8)
Sda6 swap
Sda7 Arch /
Sda8 Arch /var
Sda9 Arch swap
Sda10 Arch /home
Any ideas ?
Last edited by webmasteryoda (2010-03-20 11:17:09)Its Grub2. So there is no menu.lst. But I found this in the grub.cfg:
menuentry "arch (on /dev/sda7)" {
insmod ext2
set root=(hd0,7)
search --no-floppy --fs-uuid --set faa7744d-d27e-4350-8a1d-b18b5413fc5a
linux /boot/vmlinuz26 root=/dev/hda3 ro
initrd /boot/kernel26.img
menuentry "arch-fallback (on /dev/sda7)" {
insmod ext2
set root=(hd0,7)
search --no-floppy --fs-uuid --set faa7744d-d27e-4350-8a1d-b18b5413fc5a
linux /boot/vmlinuz26 root=/dev/hda3 ro
initrd /boot/kernel26-fallback.img
Is it causing the problems ? -
Novice user needs help with associations (strange problem)
Background
=======
I am in the process of updating several Hyperion reports from version 8.3 to 9.3.
Each reports contains a number of sections/frames (eg. Home, Segments, Basic, Location, etc), and each frame contains several items - tables, pivot tables and charts.
Three out of the four reports are working perfectly, and when I connect to each using Dashboard Studio (DS) I can see that the associations for all the items are assigned correctly.
The problem
========
Report 4 only has associations assigned to two of the sections, but the basic functionality (selecting stuff to update charts and tables etc) is working.
I now need to enable the "export" and "sort" buttons in the remaining sections and the only way to do this is to associate the remaining sections using DS. After doing this via the "make a best-guess association" button, the basic functionality is now broken - many charts, pivots and tables have had their visible properties turned off.
Observations
=========
All four reports have the following lines of code at the top of each section:
if (ActiveDocument.Qiq_blnTemplateInitialized)
{ ActiveDocument.Qiq_clsGlobals.Qiq_base_Frame_OnActivate(this) }
If I remove this code in report 4 the basic functionality is restored but there are now issues with the drop-down lists not returning to their initial (unselected) states.
So I think the issue is related to associations and frames. Any thoughts?
Thankyou
JonI would suggest you try a fresh installation of Leopard on your computer. Make sure you back-up your files that you want to keep before proceeding.
Use the install disc that came with your computer, either by inserting the disc in your disc drive and restarting the computer while holding down the c key, or by initiating the installer from the window that opens automatically when the disc is inserted.
Follow the prompts once presented with the installation environment, but watch for an "Options" button in the lower-left corner of the window. When presented with this, choose "Erase & Install" and select "Mac OS Extended (Journaling)". Continue to the next screen.
Look for the "Customize" button in the lower-left corner. With this screen, you're allowed to select what's installed on your computer. You likely don't need all the printer drivers, and you may or may not need the extra languages packs. X11 is your choice, but I choose to have it installed despite never using it.
Start the installation, and when the installer starts "verifying" your install disc, click the Skip button. Don't interfere with the installation process, and the computer will restart on its own when finished.
Setup your computer as before, and then use the Tiger install disc to re-install your iLife applications. You may contact me directly if you'd like to ask questions (alter the following address): spam [at] emoore [dot] org -
T500 overheating problems - Novice needs help
Like for some others in this forum, my Thinkpad T500 is overheating.
Here are my specs:
Model: T500 (Type: 2055)
Processor: P8600 (2.40GHz)
GPU: ATI Mobility Radeon HD 3650
When I'm doing most regular activities (browsing,emailing, documents), laptop is fine. The unit gets warm underneath, but I've not had problems.
If I'm doing more intensive activities (watching local video,Netflix, or Skyping), laptop starts to heat up enough so that it's uncomfortable on my lap.
When I play games (Nothing crazy intensive: e.g. Minecraft, Civilization 4), and sometimes when I Skype, the unit gets extremely hot underneath and shuts off without warning.
The heat seems to be originating from the left-hand side of the laptop, near the back. Unless I'm mistaken, this is where the GPU is located. And this makes sense, since the overheating seems to be related to graphics-intensive activities.
So, my questions are:
1. How can I diagnose this problem further? What's a good utility to use to monitor heat of GPU and CPU? Anything else I can use ?
2. Are there any settings I can change on my laptop to prevent the automatic shut-downs and excessive heat?
3. I've seen some mention of people cleaning fans, replacing fans / cooling units, or adding thermal paste. Need some advice there too.
Any suggestions are welcome.
Thank you!Good day and welcome to the community.
If you've never had the machine open to blow out dust from around the fan/heatsink assembly, I'd recommend that first. If you download a copy of your Hardware Manual: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/43y6630_04.pdf , you'll see that by pulling the palmrest, keyboard and keyboard bezel (manual pages 88-90, 92-93 and 102-103, respectively), that you'll expose the top side of the assembly in the upper left. The top view image on page 107 is helpful. The CPU is beneath the end section of the wider heatpipe and the GPU is beneath the narrower.
While holding the blades of the fan stationary (important!), you can use canned air to blow all of the dust from the inside out through the exhaust vents. Once done, button everything up and see if things run cooler. If you're still overheating, you may need to clean off the old thermal compound and apply new, but try the de-dusting first.
Regarding temp monitoring, many folks like TPFanControl: http://www.staff.uni-marburg.de/~schmitzr/donate.html
Scroll about 2/3 down the page for the download link for v0.62 which is the latest. It can be run in monitor-only mode or can be configured to provide a level of control over your fan speed.
Please post back your results from the first step and we can go from there.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee. -
Novice with a flashplayer problem
When I try to dowenload Flash Player on my wireless laptop
through internet explorer, it prompts me to 'agree and install'.
When I do this it then says a message box will appear and a video
but it doesn't. This is stoppping me doing loads of stuff on my
laptop. I'm a complete novice when it comes to anything technical
so any advice would be good.
Thanks DellaAssuming that the files you get from that service are actually legit mp3 files and not some sort of proprietary protected format, you can click File -> Add Folder to Library, and just browse to the folder on your harddrive the files are being stored in, select it and hit okay. The files should then appear in your library and then on your iPod once you sync it.
-
I purchased a used iPod touch advertised as 2d generation. I later found that it is first generation. I can use the device for my limited purposes but only when connected to my desktop. For some reason that I can't figure out, I am unable to download "more episodes" for my podcasts or otherwise connect to the iStore when using my wifi connection. Can anyone provide a fix for this problem. Note that my technical skill level is about 3 on a scale of 10.
Does Safari work?
Does the iPod see the networks?
See:
iOS: Troubleshooting Wi-Fi networks and connections
Maybe you are looking for
-
I forgot my administrator password
please help me to restore my password on my iMac
-
Is there anyway of tracking an ipod touch if it is stolen?
Is there anyway of tracking an ipod touch if it is stolen?
-
Mac Pro can only be booted into safe mode
Hi All This morning when I booted my Mac Pro 2009 running 10.6.8, it booted but with this error window on the desktop - The System Extension "/System/LibraryExtensions/IOStorageFamily.kext" was installed improperly and cannot be used. Please try rein
-
Alert error when master database is down
When the master database is down (server maintenance, offline back up) a lot of error messages appear in the alert.log of the slave database. Is possible to disable registration of error ORA 12012 and related when master database is closed ??
-
When exporting .psd files to jpg, the picture gets cropped
This happens on occasion. I cannot find any answers on how to fix this issue anywhere. Can someone help?